DLPS033 [TI]
DLPR410 Configuration PROM;型号: | DLPS033 |
厂家: | TEXAS INSTRUMENTS |
描述: | DLPR410 Configuration PROM 可编程只读存储器 |
文件: | 总21页 (文件大小:906K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
DLPR410
DLPS027G – AUGUST 2012 – REVISED AUGUST 2021
DLPR410 Configuration PROM
1 Features
3 Description
•
Pre-programmed Xilinx® PROM configures the
DLPC410ZYR DMD digital controller
I/O pins compatible with 1.8 V to 3.3 V
1.8 V core supply voltage
The DLPR410 device is a programmed PROM used
to properly configure the DLPC410ZYR Controller
to operate five different digital micromirror device
(DMD) options: DLP650LNIRFYL, DLP7000FLP,
DLP7000UVFLP, DLP9500FLN and, DLP9500UVFLN
DMDs. The firmware in this device enables the
DLPC410ZYR Controller to provide system data
throughput rates up to 48 Gigabits per second
(Gbps) with the options for random row addressing
and Load4 capabilities. Often this family of chips is
designed into high speed UV and NIR optical systems
such as direct imaging lithography, 3D printing and
laser marking equipment that need fast throughput
and pixel accurate control.
•
•
•
–40°C to 85°C operating temperature range
2 Applications
Lithography
•
•
•
Direct imaging
Flat panel display
Printed circuit board manufacturing
Industrial
•
•
•
3D printing
3D scanners for machine vision
Quality control
Get started with TI DLP® light-control technology
page to learn how to get started with the
DLPC410ZYR. The DLP advanced light control
resources on ti.com accelerate time to market, which
include evaluation modules, reference designs, optical
modules manufacturers, and DLP design network
partners.
Displays
•
•
•
3D imaging
Intelligent and adaptive lighting
Augmented reality and information overlay
Device Information(1)
PART
NUMBER
PACKAGE
BODY SIZE (NOM)
DLPR410
DSBGA (48)
8.00 mm × 9.00 mm × 1.20 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
LEDs / LASERs /
PWMs/Triggers
LED/LASER/Lamp Driver
Lamp
Op cal Power Sense
Op cal Sensor
LVDS Data Bus(A,B)
LVDS Data Bus(C,D)
LVDS Data Bus
Row, Block Signals
Control Signals
DLPC410 Info Signals
DLPC410ZYR
DMDs
DLP650LNIR
DLP7000
DLP7000UV
DLP9500
DLPA200 Control
MBRST
MBRST
JTAG
DLPA200
DLPA200
D0
Clk
DONE
OE
DLPA200 Control
SCP Bus
DLPR410
DLP9500UV
OSC
Power Management
TI Components
Figure 3-1. Simplified Application
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
DLPR410
www.ti.com
DLPS027G – AUGUST 2012 – REVISED AUGUST 2021
Table of Contents
1 Features............................................................................1
2 Applications.....................................................................1
3 Description.......................................................................1
4 Revision History.............................................................. 2
5 Pin Configuration and Functions...................................4
6 Specifications.................................................................. 6
6.1 Absolute Maximum Ratings........................................ 6
6.2 ESD Ratings............................................................... 6
6.3 Recommended Operating Conditions.........................6
6.4 Thermal Information....................................................6
6.5 Electrical Characteristics.............................................6
6.6 Supply Voltage Requirements for Power-On
Reset and Power-Down................................................ 7
6.7 Timing Requirements..................................................7
7 Detailed Description........................................................8
7.1 Overview.....................................................................8
7.2 Functional Block Diagram...........................................8
7.3 Feature Description.....................................................8
7.4 Device Functional Modes............................................9
8 Application and Implementation.................................. 11
8.1 Application Information..............................................11
8.2 Typical Application.................................................... 11
9 Power Supply Recommendations................................13
10 Layout...........................................................................13
10.1 Layout Guidelines................................................... 13
11 Device and Documentation Support..........................15
11.1 Device Support........................................................15
11.2 Documentation Support.......................................... 17
11.3 Receiving Notification of Documentation Updates..17
11.4 Support Resources................................................. 17
11.5 Trademarks............................................................. 17
11.6 Electrostatic Discharge Caution..............................17
11.7 Glossary..................................................................17
12 Mechanical, Packaging, and Orderable
Information.................................................................... 17
4 Revision History
NOTE: Page numbers for previous revisions may differ from page numbers in the current version.
Changes from Revision F (January 2020) to Revision G (August 2021)
Page
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Updated all references to DLPC410 Controller in data sheet to DLPC410ZYR Controller................................ 1
Updated Applications List................................................................................................................................... 1
Updated Simplified Application Diagram in Description section......................................................................... 1
Moved Xilinx XCF specifications link to top of Specifications section.................................................................1
Removed numbers appended to all DNC signals in Pin Functions table........................................................... 4
Added entry for VCCJ to Absolute Maximum Ratings..........................................................................................6
Removed footnote reference to JEDEC Standard JESD22-A114A in ESD Ratings.......................................... 6
Added entry for VCCJ to Recommended Operating Conditions.......................................................................... 6
Updated DLPC410ZYR and DLPR410 Connection Schematic........................................................................10
Updated DLPR410 and DLPC410ZYR with DMD Example Block Diagram .................................................... 11
Added Application Curves section....................................................................................................................12
Added 0.047-μF decoupling capacitor to GND for all Power Pins in Power Supply Recommendations..........13
Added Layout Example section........................................................................................................................ 14
Added DLPR410BYVA to Device Compatibility table.......................................................................................15
Added DLPR410BYVA to Part Number Description table................................................................................ 15
Added DLPR410B Device Markings.................................................................................................................15
Changes from Revision E (December 2018) to Revision F (January 2020)
Page
•
•
•
Corrected Max Tstg per Xilinx data sheet ..........................................................................................................6
Pulled in specific layout information from referenced document and removed reference................................ 13
Corrected DDC_Version(3:0) bus width to DDC_Version(2:0). ....................................................................... 15
Changes from Revision D (April 2015) to Revision E (December 2018)
Page
•
•
•
•
•
Updated Applications and Description to include new DLP650LNIR, removed data transfer rate .................... 1
Corrected Min Tstg per Xilinx data sheet ...........................................................................................................6
Corrected Min VCCO per Xilinx data sheet ....................................................................................................... 6
Added support information for new DLP650LNIR DMD (multiple places).......................................................... 8
Updated Section 7.2 .......................................................................................................................................... 8
Copyright © 2021 Texas Instruments Incorporated
2
Submit Document Feedback
Product Folder Links: DLPR410
DLPR410
www.ti.com
DLPS027G – AUGUST 2012 – REVISED AUGUST 2021
•
•
•
•
•
•
•
Corrected improper "DLPC910" reference to "DLPC410" ................................................................................11
Updated Figure 8-1 ..........................................................................................................................................11
Added Section 11.1.1 table...............................................................................................................................15
Updated Section 11.1.2 ....................................................................................................................................15
Updated Section 11.1.3 section........................................................................................................................15
Added DLP650LNIR to Table 11-2 section....................................................................................................... 17
Deleted DLP Discovery 4100 Chipset reference in Table 11-2 ........................................................................17
Changes from Revision C (March 2013) to Revision D (October 2015)
Page
•
•
•
Updated Features, Applications, and Description ..............................................................................................1
Deleted DLPR4101 (enhanced functionality PROM part number) throughout document ................................. 1
Added ESD Rating table, Feature Description section, Device Functional Modes, Application and
Implementation section, Power Supply Recommendations section, Layout section, Device and
Documentation Support section, and Mechanical, Packaging, and Orderable Information section................... 1
Deleted 1.8 V and 3.3 V operation values from VCCO, VIL, and VIH - this implementation is 2.5 V ....................6
Changed Device Marking Image ..................................................................................................................... 15
Changed Device Marking Image ..................................................................................................................... 15
Deleted DLP® Discovery™ 4100 Chipset Datasheet from Related Documentation .......................................17
Added Link to XCF16P data sheet at xilinx.com ..............................................................................................17
•
•
•
•
•
Changes from Revision B (March 2013) to Revision C (April 2013)
Page
•
•
•
Added Top View of Device..................................................................................................................................1
Added DLPR4101 "Load 4" enhanced functionality to Features........................................................................ 1
Added DLPR410 and DLPR4101 (enhanced functionality PROM part number) to DLPR410 throughout
document ...........................................................................................................................................................1
Added a link to the data sheet............................................................................................................................ 1
Added the Version column to the Ordering Information table.............................................................................4
Updated DLPC and DLP7000 / DLP7000UV Embedded Example Block Diagram.......................................... 11
Added DLP7000UV and DLP9500UV well suited for direct imaging lithography, 3D printing, and UV
applications ......................................................................................................................................................12
Added DLPR4101YVA as equivalent to TI part number 2510442-0006 ..........................................................15
Added Reference to DLPC410 data sheet....................................................................................................... 15
Added DLPR410 to Figure 11-2 .......................................................................................................................15
Added Top View of Device to device marking ..................................................................................................15
Added DLP7000UV Related Documentation....................................................................................................17
Added DLP9500UV Related Documentation....................................................................................................17
•
•
•
•
•
•
•
•
•
•
Changes from Revision A (September 2012) to Revision B (March 2013)
Page
•
Changed the top-side marking in the Ordering Information table.......................................................................4
Changes from Revision * (August 2012) to Revision A (September 2012)
Page
•
Changed the device From: Product Preview To: Production.............................................................................. 1
Copyright © 2021 Texas Instruments Incorporated
Submit Document Feedback
3
Product Folder Links: DLPR410
DLPR410
www.ti.com
DLPS027G – AUGUST 2012 – REVISED AUGUST 2021
5 Pin Configuration and Functions
1
2
3
4
5
6
A
B
C
D
E
F
G
H
Figure 5-1. YVA Package 48-Pin DSBGA Top View
Table 5-1. Pin Functions
PIN
TYPE(1)
DESCRIPTION
NAME
GND
NO.
A1
G
G
Ground
Ground
GND
A2
Output Enable/ RESET (Open-Drain I/O). When Low, this input holds the address
counter reset and the DATA and CLKOUT outputs are placed in a high-impedance state.
This is a bidirectional open-drain pin that is held Low while the PROM completes the
internal power-on reset sequence. Polarity is not programmable. Pin must be pulled
OE/ RESET
A3
I/O
High using an external 4.7-kΩ pull-up to VCCO
.
DNC
A4
A5
A6
B1
B2
B3
—
—
—
P
Do Not Connect. Leave unconnected.
D6
Do Not Connect. Leave unconnected.
D7
Do Not Connect. Leave unconnected.
VCCINT1
VCCO1
CLK
Positive 1.8-V supply voltage for internal logic.
P
Positive supply voltage connected to the output voltage drivers and internal buffers.
Do Not Connect. Leave unconnected.
I
Chip Enable Input. When CE is High, the device is put into low-power standby mode,
the address counter is reset, and the DATA and CLKOUT outputs are placed in a high
impedance state. Pin must be pulled High using an external 4.7-kΩ pull-up to VCCO
CE
B4
I
.
D5
B5
B6
C1
—
G
Do Not Connect. Leave unconnected.
Ground
GND
BUSY
—
Do Not Connect. Leave unconnected.
Configuration clock output. Each rising edge on the CLK input increments the internal
address counter. Pin must be pulled High and Low using an external 100-Ω pull-up
to VCCO and an external 100-Ω pull-down to Ground. Place resistors close to pin.
CLKOUT
C2
—
DNC
DNC
D4
C3
C4
C5
—
—
—
Do Not Connect. Leave unconnected.
Do Not Connect. Leave unconnected.
Do Not Connect. Leave unconnected.
Copyright © 2021 Texas Instruments Incorporated
4
Submit Document Feedback
Product Folder Links: DLPR410
DLPR410
www.ti.com
DLPS027G – AUGUST 2012 – REVISED AUGUST 2021
Table 5-1. Pin Functions (continued)
PIN
TYPE(1)
DESCRIPTION
NAME
NO.
VCCO2
C6
P
I
Positive supply voltage connected to the output voltage drivers and internal buffers.
Configuration pin. The CF pin must be pulled High using an external 4.7-kΩ pull-up
to VCCO. Selects serial mode configuration.
CF
D1
CEO
D2
D3
D4
D5
D6
E1
E2
E3
E4
E5
E6
F1
F2
F3
F4
F5
F6
G1
G2
G3
—
—
—
—
P
Do Not Connect. Leave unconnected.
DNC
Do Not Connect. Leave unconnected.
DNC
Do Not Connect. Leave unconnected.
D3
Do Not Connect. Leave unconnected.
VCCO4
VCCINT2
TMS
Positive supply voltage connected to the output voltage drivers and internal buffers.
Positive 1.8-V supply voltage for internal logic.
P
I
JTAG Mode Select Input. TMS has an internal 50-kΩ resistive pull-up to VCCJ
Do Not Connect. Leave unconnected.
.
DNC
—
—
—
O
G
—
—
—
G
G
I
DNC
Do Not Connect. Leave unconnected.
DNC
Do Not Connect. Leave unconnected.
TDO
JTAG Serial Data Output. TDO has an internal 50-kΩ resistive pull-up to VCCJ.
GND
DNC
Ground
Do Not Connect. Leave unconnected.
Do Not Connect. Leave unconnected.
Do Not Connect. Leave unconnected.
Ground
DNC
DNC
GND
GND
TDI
Ground
JTAG Serial Data Input. TDI has an internal 50k-Ω resistive pull-up to VCCJ
Do Not Connect. Leave unconnected.
.
DNC
—
I
REV_SEL0
Revision Select [1:0] Inputs. When the EN_EXT_SEL is Low, the Revision Select pins
are used to select the design revision to be enabled. The Revision Select [1:0] inputs
have an internal 50-kΩ resistive pull-up to VCCO. The REV_SEL0 pin must be pulled
Low using an external 4.7-kΩ pull-down to Ground. The REV_SEL1 pin must be
pulled Low using an external 4.7-kΩ pull-down to Ground.
REV_SEL1
G4
I
VCCO3
VCCINT3
GND
G5
G6
H1
P
P
G
Positive supply voltage connected to the output voltage drivers and internal buffers.
Positive 1.8-V supply voltage for internal logic.
Ground
Positive 2.5-V JTAG I/O supply voltage connected to the TDO output voltage driver and
TCK, TMS and TDI input buffers.
VCCJ
H2
H3
H4
P
I
JTAG Clock Input. This pin is the JTAG test clock. It sequences the TAP controller and
all the JTAG test and programming electronics.
TCK
External Selection Input. EN_EXT_SEL has an internal 50-kΩ resistive pull- up to VCCO
.
EN_EXT_SEL
I
The EN_EXT_SEL pin must be connected to Ground.
D1
D0
H5
H6
—
O
Do Not Connect. Leave unconnected.
DATA output pin to provide data for configuring the DLPC410ZYR in serial mode.
(1) P = Power, G = Ground, I = Input, O = Output
Copyright © 2021 Texas Instruments Incorporated
Submit Document Feedback
5
Product Folder Links: DLPR410
DLPR410
www.ti.com
DLPS027G – AUGUST 2012 – REVISED AUGUST 2021
6 Specifications
For complete electrical and mechanical specifications of the DLPR410, see the XCF16P product specification
listed in Related Documentation.
6.1 Absolute Maximum Ratings
over operating free-air temperature (unless otherwise noted) (see (1) (2)
)
MIN
–0.5
–0.5
–0.5
–0.5
–0.5
–0.5
–0.5
MAX
2.7
4.0
4.0
3.6
3.6
3.6
3.6
125
150
UNIT
V
VCCINT
VCCO
VCCJ
Internal supply voltage
I/O supply voltage
Relative to ground
Relative to ground
Relative to ground
VCCO < 2.5 V
V
JTAG I/O supply voltage
V
V
VIN
Input voltage with respect to ground
VCCO ≥ 2.5 V
V
VCCO < 2.5 V
V
VTS
Voltage applied to high-impedance output
VCCO ≥ 2.5 V
V
TJ
Junction temperature
°C
°C
Tstg
Storage temperature, ambient
–65
(1) Stresses beyond those listed under Absolute Maximum Ratings can cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under Section 6.3 is not implied.
Exposure to absolute-maximum-rated conditions for extended periods can affect device reliability.
(2) Maximum DC undershoot below GND must be limited to either 0.5 V or 10 mA. During transitions, the device pins can undershoot to
–2 V or overshoot to 7 V, provided this overshoot or undershoot lasts less than 10 ns and with the forcing current being limited to 200
mA.
6.2 ESD Ratings
VALUE
UNIT
Electrostatic
discharge
Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins
(1)
V(ESD)
2000
V
(2)
(1) Electrostatic discharge (ESD) to measure device sensitivity and immunity to damage caused by assembly line electrostatic discharges
in to the device.
(2) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
6.3 Recommended Operating Conditions
over operating free-air temperature range (unless otherwise noted)
MIN
1.65
2.3
2.3
0
NOM
1.8
MAX
2.0
UNIT
V
VCCINT
VCCO
VCCJ
VIL
Internal voltage supply
Supply voltage for output drivers
JTAG I/O Supply voltage
Low-level input voltage
High-level input voltage
Output voltage
2.5-V operation
2.5-V operation
2.5-V operation
2.5-V operation
2.5
2.7
V
2.5
2.7
V
0.7
V
VIH
1.7
0
3.6
V
VO
VCCO
500
85
V
tIN
Input signal transition time (measured between 10% VCCO and 90% VCCO
Operating ambient temperature
)
ns
°C
TA
–40
6.4 Thermal Information
Refer to the XCF16P product specifications.
6.5 Electrical Characteristics
Refer to the XCF16P product specifications at www.xilinx.com.
Copyright © 2021 Texas Instruments Incorporated
6
Submit Document Feedback
Product Folder Links: DLPR410
DLPR410
www.ti.com
DLPS027G – AUGUST 2012 – REVISED AUGUST 2021
6.6 Supply Voltage Requirements for Power-On Reset and Power-Down
(see (1)
)
MIN
0.2
0.5
0.5
MAX
50
UNIT
ms
V
tVCC
VCCPOR
tOER
VCCINT rise time from 0 V to nominal voltage (2)
POR threshold for VCCINT supply
–
OE/ RESET release delay following POR (3)
30
ms
V
VCCPD
Power-down threshold for VCCINT supply
0.5
Time required to trigger a device reset when the VCCINT supply drops below the
maximum VCCPD threshold
tRST
10
ms
(1) VCCINT, VCCO, and VCCJ supplies can be applied in any order.
(2) At power-up, the device requires the VCCINT power supply to monotonically rise to the nominal operating voltage within the specified
tVCC rise time. If the power supply cannot meet this requirement, then the device might not perform power-on-reset properly. See
Platform Flash PROM Power-Up Requirements, in the Xilinx XCF16P (v2.19) Product Specification for more information.
(3) If the VCCINT and VCCO supplies do not reach their respective recommended operating conditions before the OE/ RESET pin is
released, then the configuration data from the PROM is not available at the recommended threshold levels. The configuration
sequence must be delayed until both VCCINT and VCCO have reached their recommended operating conditions.
6.7 Timing Requirements
Refer to the XCF16P product specifications at www.xilinx.com.
Copyright © 2021 Texas Instruments Incorporated
Submit Document Feedback
7
Product Folder Links: DLPR410
DLPR410
www.ti.com
DLPS027G – AUGUST 2012 – REVISED AUGUST 2021
7 Detailed Description
7.1 Overview
The configuration bit stream stored in the DLPR410 device supports reliable operation of the DLPC410ZYR
device with the DLP650LNIRFYL, DLP7000FLP, DLP7000UVFLP, DLP9500FLN and, DLP9500UVFLN DMDs.
DMDs. The DLPC410ZYR digital controller loads this configuration bit stream from the DLPR410 device.
7.2 Functional Block Diagram
TCK
TDI
TMS
OE/RESET
CLKOUT
CE
CEO
TDO
DLPR410
D0
CF
EN_EXT_SEL
REV_SEL0
REV_SEL1
Figure 7-1. Functional Block Diagram
7.3 Feature Description
7.3.1 Data Interface
7.3.1.1 Data Outputs
The DLPR410 device is configured for serial mode operation, where D0 is the data output pin. D0 output
pin provides a serial connection to the DLPC410ZYR controller, where the configuration is read out by the
DLPC410ZYR controller.
7.3.1.2 Configuration Clock Input
The configuration CLK is connected to the DLPC410ZYR controller in Primary Serial mode, where the
DLPC410ZYR controller provides the clock pulses to read the configuration from the DLPR410 device.
7.3.1.3 Output Enable and Reset
When the OE/ RESET input is held low, the address counter is reset and the Data (D0) and CLKOUT outputs
are placed in high-impedance state. OE/ RESET must be pulled High using an external 4.7-kΩ pull-up to
VCCO
.
7.3.1.4 Chip Enable
The CE input is asserted by the DLPC410ZYR controller to enable the Data (D0) and CLKOUT outputs. When
CE is held high, the DLPR410 device address counter is reset, and the Data and CLKOUT outputs are placed in
high-impedance states.
Copyright © 2021 Texas Instruments Incorporated
8
Submit Document Feedback
Product Folder Links: DLPR410
DLPR410
www.ti.com
DLPS027G – AUGUST 2012 – REVISED AUGUST 2021
7.3.1.5 Configuration Pulse
The DLPR410 device is configured in serial mode when it holds configuration pulse pin, CF, high and it enables
the CE and OE pins. New data is available a short time after each rising clock edge.
7.3.1.6 Revision Selection
The device uses the REV_SEL0, REV_SEL1, and EN_EXT_SEL signals to select a revision to act as the
default. Setting all three signals to GND defaults to revision 0 for simple DLPR410 device setup.
7.4 Device Functional Modes
To successfully program the DLPC410ZYR controller upon power-up, the DLPR410 device must be configured
and connected to the DLPC410ZYR controller as shown in Figure 7-2.
Copyright © 2021 Texas Instruments Incorporated
Submit Document Feedback
9
Product Folder Links: DLPR410
DLPR410
www.ti.com
DLPS027G – AUGUST 2012 – REVISED AUGUST 2021
VCC_2P5V
VCC_1P8V
Master Serial
Config Mode
M0_0 W18
M2_0 V18
M1_0 Y17
DDC_M0
Y9 VCC_0_1
VCC_0_2
NP
0
B3
C2
A3
B4
C1
CLK
W12
CLKOUT
OE/RESET
CE
PROG
JTAG
MODE
D_IN_0 K11
CCLK_0 J10
DONE_0 K10
INT_B_0 J11
PROM_D0_DDC
PROM_CCK_DDC
DONE_DDC
DNC11 D4
BUSY
N14 VP_0
VN_0
DNC10 D3
DNC9 G2
DNC8 F4
DNC7 F3
DNC6 F2
DNC5 E4
DNC4 E3
DNC3 C4
DNC2 C3
DNC1 A4
P13
INTB_DDC
A6
A5
B5
C5
D5
E5
H5
H6
D7
D6
D5
D4
D3
D2
D1
D0
R14 DXP_0
R13 DXN_0
CS_B_0 N18
PROGRAM _B_0 J18
RWDR_B_0 P18
D_OUT_BUSY_0 W11
HSWAPEN_0 L18
PROGB_DDC
DLPR410
M14 AVDD_0
M13 AVSS_0
P14
VREFP_0
N13 VREFN_0
TCK_0 U11
TMS_0 V12
TDI_0 V11
TDO_0 W10
TCK_JTAG
TMS_JTAG
TDO_XCF16DDC
TDO_DDC
G3
G4
H4
D2
D1
REV_SEL0
REV_SEL1
EN_EXT_SEL
CEO
CF
TMS
TDO
TDI
E2
E6
G1
H3
TMS_JTAG
TDO_XCF16DDC
TDI_DDC
R18 RSVD7
T18
RSVD8
TCK
TCK_JTAG
DLPC410ZYR
Figure 7-2. DLPC410ZYR and DLPR410 Connection Schematic
Copyright © 2021 Texas Instruments Incorporated
10
Submit Document Feedback
Product Folder Links: DLPR410
DLPR410
www.ti.com
DLPS027G – AUGUST 2012 – REVISED AUGUST 2021
8 Application and Implementation
Note
Information in the following applications sections is not part of the TI component specification,
and TI does not warrant its accuracy or completeness. TI’s customers are responsible for
determining suitability of components for their purposes, as well as validating and testing their design
implementation to confirm system functionality.
8.1 Application Information
The DLPR410 device configuration PROM ships pre-programmed with configuration code for the DLPC410ZYR
controller. Upon power-up, the DLPC410ZYR controller and the DLPR410 device connect to enable
configuration information to be sent from the DLPR410 device to the DLPC410ZYR controller, such that the
DLPC410ZYR controller can configure itself for proper operation within the application. Without the DLPR410
device properly connected to the DLPC410ZYR controller in the application system, the DLPC410ZYR controller
does not boot and the system remains inoperable.
8.2 Typical Application
A typical embedded system application using the DLPR410 device to program the DLPC410 controller (to drive
one of 5 different DMDs) is shown in Figure 8-1. For complete details of this typical application refer to the
DLPC410 controller data sheet listed in Table 11-2.
LEDs / LASERs /
Lamp
PWMs/Triggers
LED/LASER/Lamp Driver
Op cal Sensor
Op cal Power Sense
LVDS Data Bus(A,B)
LVDS Data Bus(C,D)
LVDS Data Bus
Row, Block Signals
Control Signals
DLPC410 Info Signals
JTAG
DLPC410ZYR
DMDs
DLP650LNIR
DLP7000
DLP7000UV
DLP9500
DLP9500UV
DLPA200 Control
MBRST
MBRST
DLPA200
DLPA200
D0
Clk
DLPA200 Control
SCP Bus
DLPR410
DONE
OE
OSC
Power Management
TI Components
Figure 8-1. DLPR410 and DLPC410ZYR with DMD Example Block Diagram
8.2.1 Design Requirements
The DLPR410 is part of a multi-chipset solution, and it is required to be coupled with the DLPC410ZYR
controller for reliable operation of the DLP650LNIRFYL, DLP7000FLP, DLP7000UVFLP, DLP9500FLN and,
DLP9500UVFLN DMDs. DMDs. For more information, refer to the DLPC410ZYR datasheet listed in Section
11.2.1.
Copyright © 2021 Texas Instruments Incorporated
Submit Document Feedback
11
Product Folder Links: DLPR410
DLPR410
www.ti.com
DLPS027G – AUGUST 2012 – REVISED AUGUST 2021
8.2.2 Detailed Design Procedure
The DMDs are designed to be operated by the DLPC410ZYR Digital Controller:
•
•
•
The DLP7000FLP and DLP9500FLN DMDs are well suited for visible light applications requiring fast, spatially
programmable light patterns using the micromirror array.
The DLP7000UVFLP and DLP9500UVFLN DMDs are well suited for direct imaging lithography, 3D printing
applications, and other applications requiring ultraviolet light (UVA).
The DLP650LNIRFYL DMD enables high-power NIR laser illumination for dynamic digital printing, sintering
and marking solutions.
Connections between the DLPC410ZYR Digital Controller, the DLPR410 Configuration PROM, and the
DLPA200 DMD micromirror driver(s) must follow the layout guidelines for reliability.
8.2.3 Application Curves
Figure 8-2. DLP7000 and DLP9500 Transmittance
Figure 8-3. DLP7000UV and DLP9500UV
Transmittance (UV Window)
(Visible Window)
100
AOI = 0°
80
60
40
20
0
600
800
1000
1200
1400
1600
1800
2000
Wavelength (nm)
Figure 8-4. DLP650LNIR Transmittance (NIR Window)
Copyright © 2021 Texas Instruments Incorporated
12
Submit Document Feedback
Product Folder Links: DLPR410
DLPR410
www.ti.com
DLPS027G – AUGUST 2012 – REVISED AUGUST 2021
9 Power Supply Recommendations
The DLPR410 uses two power supply rails as shown in Table 9-1.
Table 9-1. DLPR410 Power Supply Rails
SUPPLY
POWER PINS
COMMENTS
All VCCINT pins must be connected with a 0.1-µF and a
0.047-μF decoupling capacitor to GND.
1.8 V
VCCINT1, VCCINT2, and VCCINT3
All VCCO and VCCJ pins must be connected with a 0.1-
µF and a 0.047-μF decoupling capacitor to GND.
2.5 V
VCCO1,VCCO2,VCCO3, VCCO4, and VCCJ
10 Layout
10.1 Layout Guidelines
The DLPR410 is part of a multi-chipset solution. It is required to be used with the DLPC410ZYR Controller to
provide reliable control of any attached DMDs. These guidelines are targeted at designing a PCB board with the
DLPR410.
10.1.1 Component Placement
The DLPR410 must be placed adjacent to the DLPC410ZYR Controller with a maximum electrical distance of 4
inches (10 cm).
10.1.2 Impedance Requirements
Signals between the DLPR410 and the DLPC410ZYR Controller must be routed to have a matched impedance
of 50 Ω ±10%.
10.1.3 PCB Signal Routing
When designing a PCB board which includes the DLPR410 and the DLPC410ZYR Controller, the following are
recommended:
Signal trace corners must be no sharper than 45°. Adjacent signal layers must have the predominate traces
routed orthogonal to each other.
TI does not recommend signal routing on power or ground planes.
TI does not recommend ground plane slots.
High speed signal traces must not cross over slots in adjacent power and/or ground planes.
10.1.4 Fiducials
Fiducials for automatic component insertion must be 0.05-inch copper with a 0.1-inch cutout (antipad). Fiducials
for optical auto insertion are placed on three corners of both sides of the PCB.
10.1.5 PCB Decoupling Guidelines
Decoupling capacitors must be utilized to provide instantaneous current sources to components and to help
mitigate ground bounce.
10.1.5.1 Bulk Decoupling
Bulk decoupling capacitors for the board must be distributed around the PCB and be sized to handle the current
demands for the board.
10.1.5.1.1 DLPR410 Decoupling Capacitors
Decoupling capacitors (0.1 µF recommended) are placed to minimize the distance from the decoupling capacitor
to the supply and ground pins of the component. It is recommended that the placement of and routing for the
decoupling capacitors meet the following guidelines:
•
The supply voltage pin of the capacitor must be located close to the device supply voltage pin(s). The
decoupling capacitor must have vias to ground and voltage planes. The device can be connected directly to
Copyright © 2021 Texas Instruments Incorporated
Submit Document Feedback
13
Product Folder Links: DLPR410
DLPR410
www.ti.com
DLPS027G – AUGUST 2012 – REVISED AUGUST 2021
the decoupling capacitor (no via) if the trace length is less than 0.1 inch. Otherwise, the component must be
tied to the voltage or ground plane through separate vias.
•
•
•
•
The trace lengths of the voltage and ground connections for decoupling capacitors and components must be
less than 0.1 inch to minimize inductance.
The trace width of the power and ground connection to decoupling capacitors and components must be as
wide as possible to minimize inductance.
Connecting decoupling capacitors to ground and power planes through multiple vias can reduce inductance
and improve noise performance. Via sharing between components (discreet or integrated) is discouraged.
Decoupling performance can be improved by utilizing low ESR and low ESL capacitors.
10.1.6 Layout Example
Please refer to the DLPLCRC410EVM Design files for an example of how to layout the DLPR410 Configuration
PROM.
Copyright © 2021 Texas Instruments Incorporated
14
Submit Document Feedback
Product Folder Links: DLPR410
DLPR410
www.ti.com
DLPS027G – AUGUST 2012 – REVISED AUGUST 2021
11 Device and Documentation Support
11.1 Device Support
11.1.1 Device Compatibility
TI PART NUMBER
DLPR410YVA
DDC_Version(2:0)(2)
Compatible DMDs (1)
5
7
DLP7000FLP, DLP7000UVFLP, DLP9500FLN and, DLP9500UVFLN DMDs.
DLPR410AYVA
DLP650LNIRFYL, DLP7000FLP, DLP7000UVFLP, DLP9500FLN and, DLP9500UVFLN
DMDs.
DLPR410BYVA
0
DLP650LNIRFYL, DLP7000FLP, DLP7000UVFLP, DLP9500FLN and, DLP9500UVFLN
DMDs.
(1) Refer to each individual DMD datasheet under Device and Documentation Support for more DMD information.
(2) Refers to the DDC_Version(2:0) output pins of the DLPC410 Controller once configured by this Configuration PROM. See the
DLPC410 datasheet (DLPS024) for more information.
11.1.2 Device Nomenclature
The device nomenclature is as shown in Figure 11-1. The part number description for previously and currently
available part numbers is shown in Table 11-1.
DLPR410 A YVA
Package Type
Revision
Device Descriptor
Figure 11-1. Device Nomenclature
Table 11-1. Part Number Description
TI PART NUMBER
DLPR410YVA
DESCRIPTION
REFERENCE NUMBER
2510442-0005
DLPR410 Configuration PROM
DLPR410AYVA
DLPR410BYVA
DLPR410A Configuration PROM (Added compatibility with DLP650LNIR)
DLPR410B Configuration PROM (Compatibile with DLP650LNIR)
DLPR410AYVA
DLPR410BYVA
11.1.3 Device Markings
Figure 11-2 shows the previous device marking for the DLPR410 device. For the DLPR410A and DLPR410B,
this device marking nomenclature has been updated to use the DLPR410A and DLPR410B device part numbers
instead of the previous 2510442 marking, as shown in Figure 11-3 and Figure 11-4.
2510442-0005
YY/WW
Pin 1
Figure 11-2. DLPR410 Device Markings
Copyright © 2021 Texas Instruments Incorporated
Submit Document Feedback
15
Product Folder Links: DLPR410
DLPR410
www.ti.com
DLPS027G – AUGUST 2012 – REVISED AUGUST 2021
DLPR410A
YVA YY/WW
Pin 1
Figure 11-3. DLPR410A Device Markings
DLPR410B
YVA YY/WW
Pin 1
Figure 11-4. DLPR410B Device Markings
Where YY/WW is the year/week the part was programmed.
Copyright © 2021 Texas Instruments Incorporated
16
Submit Document Feedback
Product Folder Links: DLPR410
DLPR410
www.ti.com
DLPS027G – AUGUST 2012 – REVISED AUGUST 2021
11.2 Documentation Support
11.2.1 Related Documentation
For related documentation, see the following:
Table 11-2. Related Documentation
DOCUMENT
TI LITERATURE NUMBER
DLP650LNIR 0.65 NIR WXGA S450 DMD data sheet
DLP7000 DLP 0.7 XGA 2xLVDS Type A DMD data sheet
DLP7000UV DLP 0.7 UV XGA 2xLVDS Type-A DMD data sheet
DLP9500 DLP 0.95 1080p 2xLVDS Type-A DMD data sheet
DLP9500UV DLP 0.95 UV 1080p 2xLVDS Type-A DMD data sheet
DLPA200 DMD Micromirror Driver data sheet
DLPS136
DLPS026
DLPS061
DLPS025
DLPS033
DLPS015
DLPC410 DMD Digital Controller data sheet
DLPS024
XCF16P data sheet
available at www.xilinx.com
11.3 Receiving Notification of Documentation Updates
To receive notification of documentation updates, navigate to the device product folder on ti.com. Click on
Subscribe to updates to register and receive a weekly digest of any product information that has changed. For
change details, review the revision history included in any revised document.
11.4 Support Resources
TI E2E™ support forums are an engineer's go-to source for fast, verified answers and design help — straight
from the experts. Search existing answers or ask your own question to get the quick design help you need.
Linked content is provided "AS IS" by the respective contributors. They do not constitute TI specifications and do
not necessarily reflect TI's views; see TI's Terms of Use.
11.5 Trademarks
TI E2E™ is a trademark of Texas Instruments.
Xilinx® is a registered trademark of Xilinx, Inc.
All trademarks are the property of their respective owners.
11.6 Electrostatic Discharge Caution
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled
with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may
be more susceptible to damage because very small parametric changes could cause the device not to meet its published
specifications.
11.7 Glossary
TI Glossary
This glossary lists and explains terms, acronyms, and definitions.
12 Mechanical, Packaging, and Orderable Information
The following pages include mechanical, packaging, and orderable information. This information is the most
current data available for the designated devices. This data is subject to change without notice and revision of
this document. For browser-based versions of this datasheet, refer to the left-hand navigation.
Copyright © 2021 Texas Instruments Incorporated
Submit Document Feedback
17
Product Folder Links: DLPR410
PACKAGE OPTION ADDENDUM
www.ti.com
15-Aug-2021
PACKAGING INFORMATION
Orderable Device
Status Package Type Package Pins Package
Eco Plan
Lead finish/
Ball material
MSL Peak Temp
Op Temp (°C)
Device Marking
Samples
Drawing
Qty
(1)
(2)
(3)
(4/5)
(6)
DLPR410AYVA
DLPR410BYVA
ACTIVE
ACTIVE
DSBGA
DSBGA
YVA
YVA
48
48
3
3
TBD
TBD
Call TI
Call TI
Call TI
-40 to 85
-40 to 85
Call TI
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance
do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may
reference these types of products as "Pb-Free".
RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.
Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of <=1000ppm threshold. Antimony trioxide based
flame retardants must also meet the <=1000ppm threshold requirement.
(3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.
(5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.
(6)
Lead finish/Ball material - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead finish/Ball material values may wrap to two
lines if the finish value exceeds the maximum column width.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
15-Aug-2021
Addendum-Page 2
IMPORTANT NOTICE AND DISCLAIMER
TI PROVIDES TECHNICAL AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING REFERENCE
DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS”
AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY
IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD
PARTY INTELLECTUAL PROPERTY RIGHTS.
These resources are intended for skilled developers designing with TI products. You are solely responsible for (1) selecting the appropriate
TI products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable
standards, and any other safety, security, or other requirements. These resources are subject to change without notice. TI grants you
permission to use these resources only for development of an application that uses the TI products described in the resource. Other
reproduction and display of these resources is prohibited. No license is granted to any other TI intellectual property right or to any third party
intellectual property right. TI disclaims responsibility for, and you will fully indemnify TI and its representatives against, any claims, damages,
costs, losses, and liabilities arising out of your use of these resources.
TI’s products are provided subject to TI’s Terms of Sale (https:www.ti.com/legal/termsofsale.html) or other applicable terms available either
on ti.com or provided in conjunction with such TI products. TI’s provision of these resources does not expand or otherwise alter TI’s
applicable warranties or warranty disclaimers for TI products.IMPORTANT NOTICE
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2021, Texas Instruments Incorporated
相关型号:
©2020 ICPDF网 联系我们和版权申明