IP_TNETV1050 [TI]
IP Phone Solution; IP电话解决方案
| 型号： | IP_TNETV1050 |
| 厂家： | 
TEXAS INSTRUMENTS |
| 描述： | IP Phone Solution |
| 文件： | 总5页 (文件大小：55K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
R E A L
W O R L D
S I G N A L
P R O C E S S I N G ™
Product Bulletin
Key Features:
• Leverages proven TI DSP
technology, featuring
IP Phone Solution
TNETV1050
- Code compatibility
- Advanced process technology
- Production facilities
• Field-proven Telogy Software™
with enhanced QOS,
The Telogy microprocessor
Texas Instruments’ TNETV1050
IP Phone Solution is composed
of an integrated silicon platform,
featuring the market leading
programmable TMS320C55x™
Digital Signal Processor (DSP)
and a MIPS32™ 4KEc™ processor,
combined with the field-proven
VoIP Telogy Software™ product.
TI’s TNETV1050 IP Phone
software, along with third party
interoperability, and remote
monitoring
components, offers a toolkit with
a variety of functions to support
IP Phone implementations. This
includes voice applications services
that access DSP services and support
APIs necessary for implementation
of call processing features. Sample
code for device drivers and network
management is provided. Additional
packages include full signaling services
with standard network protocols, SIP,
H.323, and MGCP. Figure 1 shows the
IP phone software architecture.
The TNETV1050 IP Phone
• Expandable solution
supporting next generation
IP phone applications
• Pre-integrated RTOS and
Network protocol stacks
(SIP, H.323, MGCP) enabling
rapid implementation of
customer’s unique features
and services
solution leverages TI’s investment
in communication processors for
VoIP and broadband applications
to provide the superior processing
horsepower needed to support
current and evolving IP phone
standards, as well as the addition
of advanced functionality.
• Most comprehensive feature set
• Largest installed base worldwide
of IP phone solutions
• World class technical support
• Industry leading in indemnification
program with broad patent
portfolio
product provides the functionality
required for today's executive
enterprise desktop speakerphones.
It includes acoustic echo cancellation
for full duplex speakerphone capabil-
ity (when used in a properly
One of the unique features
of TI’s IP Phone solution is the
accompanying starter kit. The
starter kit includes the software
development license, software
training and complete IP Phone
reference design for immediate
demonstration and development.
designed enclosure), support for
three-way conferencing and support
for low bit rate and wideband codecs.
either USB host or peripheral. The
USB interface; allows for a wide vari-
ety of possible devices to connect to
the phone for user value add. These
devices support applications such as
card readers, fingerprint recognition,
PDA synchronization, video confer-
encing, etc.
Silicon Solution
The IP Phone Solution includes a
programmable TI C55x™ DSP for
optimal IP Phone voice processing
and signal processing features. The
MIPS32 4KEc processor provides a
standards based RISC architecture
for customer ease in feature develop-
ment and integration with Telogy
Software services. The three port
line rate internal Ethernet Switch
with dual MAC and PHY provides
support for IP Phone and PC
Telogy Software for IP Phone
Applications
Telogy Software provides an
efficient framework for real-time
voice processing that has been
pre-integrated and rigorously
tested. The complete DSP solution
feature set includes: PCM reception,
tone generation, acoustic echo
cancellation, voice activity detection,
voice playout, and a variety of voice
compression options. The solutions
are provided in several packages to
allow customization for a full range
of phone products.
The TNETV1050 also supports
TI’s VLYNQ™ interface; a low cost,
low pin count and low complexity
chip-to-chip serial interface. VLYNQ
makes it easy to add off-chip co-
processors and peripheral capability
to the phone. VLYNQ enables the
customer to bring in value-added
features such as video/multimedia,
wireless connectivity, security,
speech recognition and more.
connectivity to the Ethernet LAN.
The IP Phone processor has a USB
1.1 controller and PHY that support
TNETV1050 IP Phone Software Architecture
Management and
Application Software
Application
Software
Call Processing and Signaling
Call Processing Features
MGCP Call
Control
Basic Call
Control
Extended Call
Control
Management and
Application Software
Embedded
Web Browser
Media
Gateway
Control
Protocol
(MGCP)
Session
Initiation
Protocol
(SIP)
DSP
Application
Services
Embed. SNMP TFTP
User
Procedures
H.323
H.450
Web
Agent S/W
DLL
Server
DSP Interface Module (DIM)
User
Interface
System Interface Unit (SIU)
UDP TCP
* Keypad
Driver
Call
IP
Conferenc-
ing
Gain
Voice
* Display
Driver
Control
Coding
Unit
MAC/ARP
Packet
Playout
Unit
PCM
Packet
Interface
Unit
Echo
Cancellation
Unit
Speaker-
phone
Protocol
Encapsulation
Unit
* Audible
Driver
G.711PCM
G.726
Ethernet
Driver
Voice
Activity
Detector
(VAD)
G.722
G.723.1
G.729AB
G.widebd
Delay, Jitter
and
Lost Packet
Compensation
Tone
Gen.
Network
Interface
Protocols
BIOS
Voice Processing - DSP Software
LEGEND
* Startup/
RTOS
* WDT
Driver
Telogy Software™
Initialization
Customer Software
* Power-On
Self-Test
(POST)
* Flash
Memory
Manager
* BSP
Radvision H.323, SIP Protocol Stacks
Available Third Party Software
(TI pre-port for VxWorks)
System Services
Available Third Party Software
TI provides sample code
for IP Phone Reference Design
*
2
Description
The TNETV1050 is a communica-
tions processor based on a MIPS32
Reduced Instruction Set Computer
(RISC) processor along with a
C55x DSP. This device has
DSP DMA
TNETV1050 IP Phone Processor
Telephony
Interface
McBSP
McBSP
TMS320C55x™
DSP
External
Memory
Interface
a rich peripheral set architected
specifically for VoIP Phone
Codec
2 Channel
applications, which reduces the
bill of materials cost, time, and
complexity to develop an IP
Phone. The TNETV1050 combines
the key processor, communication,
and peripheral functions necessary
to build a basic or advanced
LCD
MIPS R4000
VLYNQ™
Controller
5 Pin
VLYNQ™
3 Pin
USB 1.1
Host
DMA
USB 1.1
Device
Serial
UART
Ethernet
GPIO
MAC
MAC
PHY
Ethernet
Switch
3 port
Keypad 8x8
IP phone. The TNETV1050
Ethernet
PHY
Voltage
Clock/Power
Manager
Regulator
architecture uses advanced design
features to provide flexibility and
performance throughput, while
conserving power consumption.
Combined with Telogy Software
for IP Phone applications, the
TNETV1050 provides a complete
hardware/software solution
Other codec features include
analog and digital sidetone control,
anti-aliasing filter, programmable
gain options, and programmable
sampling rate (8 or 16 ksps).
External Memory Interface
Supporting
capable of reducing system
• 2 SDRAM Chip Selects
providing 128M-Byte
design cycle times.
The RISC processor supplies
the overall system services and
performs user interface, network
management, protocol stack
management, call processing, and
task scheduling functions. The
DSP processor provides real-time
voice processing functions such
as echo cancellation, compression,
PCM processing, and tone genera-
tion/detection.
• 3 Chip Selects providing
16M-Byte each, RAM or ROM
• 1 Chip Select providing
32M-Byte, FLASH
32-bit RISC Processor
Memory Configuration
• 16K-Byte 4-way set associative
Instruction-Cache
Overall
• 324-Ball PBGA (Plastic Ball
Grid Array) package
• 16K-Byte 4-way set associative
Data-Cache
• 3.3V I/O Supply Voltage
• 1.5V Core Supply Voltage,
integrated Voltage Regulator
• Reduced power modes available
• Programmable Memory
Management Unit (MMU)
• 4K-Byte RAM on chip
• 4K-Byte ROM on chip, with
boot code
IP phone designs are simplified
through on-chip peripherals such
as a 16-bit color LCD controller,
8x8 keypad interface, USB 1.1
controller (Host or Device), UART
serial interface, programmable
serial port, two VLYNQ interfaces,
and several general purpose I/O.
The integrated dual-channel
16-bit CODEC includes the critical
functions needed for IP Phone
applications, including two ADCs
(with five programmable inputs)
and two DACs (with four
Digital Signal Processor
(DSP)
Memory Configuration
• 12K-Word 2-way set associative
Instruction-Cache
• 64K-Word RAM on chip:
- 32K-Word dual access
- 32K-Word single access
• Universal 4-channel DMA controller
• Dedicated peripheral DMA
controller
programmable outputs).
3
Specifications: Telogy Software™ for IP Phone Processor
IP PHONE FEATURES – DSP
PCM Voice Mode
G.711 Codec with support for Annex I and II
Gain Control
Analog and Digital Tx/Rx Control
Voice Activity Detection
Adaptive Voice Activity Detection (VAD)
Configurable Hangover Period
Useable with any Codec (disabled w/ codec internal VAD)
Bi-Directional Silence Detection
Silence Insertion Descriptor (SID) Support
Voice Playout
Noise Level Matching
Adaptive Pink Comfort Noise Generation
Configurable, Adaptive Jitter Buffer
Lost Packet Compensation
Echo Cancellation
Acoustic Echo Cancellation for Full Duplex Speakerphone when used
with properly designed enclosure
Doubletalk Detection
Packet Protocol
VoIP (RTP) Packet Format
Real Time Diagnostics
Telchemy™ QOS Support
PCM Pattern Detection
Signal Level Measurement and Report
Jitter Statistics
Transmit, Receive, Lost Packet Counts
Loopback Mode
Codec Options*
G.711 Codec, G.726, G.729AB, G.723.1A, G.722 wideband codec
Advanced Power Management
3-Way Conferencing and Group Listen
Full Duplex Speakerphone Support
G.167 Acoustic Echo Cancellation*
4
IP Phone Processor Softw are Product Specifications
MICROPROCESSOR FEATURES
IP Phone Platform
Voice Applications Services
APIs to access DSP Services
APIs needed to setup DSP for basic and supplementary services
APIs to generate inband tones
Sample Display and Keypad Drivers
Sample Network Management Module
VxWorks® RTOS support
RTOS Run-Time licenses provided with complete solution (optional).
Development and any related tools must be obtained via RTOS vendors
Signaling Services Package (In addition to Voice Application Services features above)
TI MGCP (NCS) Protocol – with TI sample Basic Call control Basic call support
OR
TI H.323 Protocol support - TI sample Basic Call control. H.323 Network Protocol
Stack available via Radvision, Third Party partner
OR
Radvision H.323 Call Control and Protocol Stack support - with support for
supplementary services, available via Radvision, a TI Third Party partner
OR
Radvision SIP Call Control and Protocol Stack support - with support for supplementary
services, available via Radvision, a TI Third Party partner
* Please consult your sales representative for latest product features and availability.
For more information, please contact your TI sales representative or call 301-515-8580.
www.ti.com/voip
Important Notice: The products and services of Texas Instruments Incorporated and its subsidiaries described herein are sold subject to TI’s standard terms and
conditions of sale. Customers are advised to obtain the most current and complete information about TI products and services before placing orders. TI assumes no
liability for applications assistance, customer’s applications or product designs, software performance, or infringement of patents. The publication of information
regarding any other company’s products or services does not constitute TI’s approval, warranty or endorsement thereof.
C010203
Real World Signal Processing, the black/red banner, TMS320C55x and VLYNQ are trademarks of Texas Instruments. Telogy Software is a trademark of Telogy Networks,
a Texas Instruments Company. All other trademarks are the property of their respective owners.
© 2003 Texas Instruments Incorporated
Printed in the U.S.A.
SPAT140
Printed on recycled paper.
5
相关型号：
©2020 ICPDF网 联系我们和版权申明