LM119 MDR [TI]
高速双路比较器 | Y | 0 | -55 to 125;
| 型号： | LM119 MDR |
| 厂家： | 
TEXAS INSTRUMENTS |
| 描述： | 高速双路比较器 | Y | 0 | -55 to 125 放大器 放大器电路 比较器 |
| 文件： | 总22页 (文件大小：666K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
LM119QML
LM119QML High Speed Dual Comparator
Literature Number: SNOSAN3A
January 13, 2009
LM119QML
High Speed Dual Comparator
General Description
The LM119 is a precision high speed dual comparator fabri-
cated on a single monolithic chip. It is designed to operate
over a wide range of supply voltages down to a single 5V logic
supply and ground. Further, it has higher gain and lower input
currents than devices like the LM710. The uncommitted col-
lector of the output stage makes the LM119 compatible with
RTL, DTL and TTL as well as capable of driving lamps and
relays at currents up to 25 mA.
Features
Available with radiation guaranteed
■
High Dose Rate
ELDRS Free
100 krad(Si)
100 krad(Si)
—
—
Two independent comparators
Operates from a single 5V supply
Typically 80 ns response time at ±15V
Minimum fan-out of 2 each side
■
■
■
■
■
■
■
Maximum input current of 1 μA over temperature
Inputs and outputs can be isolated from system ground
High common mode slew rate
Although designed primarily for applications requiring opera-
tion from digital logic supplies, the LM119 is fully specified for
power supplies up to ±15V. It features faster response than
the LM111 at the expense of higher power dissipation. How-
ever, the high speed, wide operating voltage range and low
package count make the LM119 much more versatile than
older devices like the LM711.
Ordering Information
NS Part Number
LM119E/883
SMD Part Number
NS Package Number
Package Description
20LD LCC
E20A
E20A
H10C
H10C
H10C
H10C
LM119E-SMD
LM119H/883
86014012A
20LD LCC
10LD T0-100 Metal Can
10LD T0-100 Metal Can
10LD T0-100 Metal Can
10LD T0-100 Metal Can
LM119H-SMD
LM119H-QMLV
8601401IA
5962-9679801VIA
LM119HRQMLV
HIGH DOSE RATE (Note 13)
5962R9679801VIA
100 krad(Si)
LM119HRLQMLV
ELDRS FREE (Note 14)
5962R9679802VIA
100 krad(Si)
H10C
10LD T0-100 Metal Can
LM119J/883
J14A
J14A
J14A
J14A
14LD CERDIP
14LD CERDIP
14LD CERDIP
14LD CERDIP
LM119J-SMD
LM119J-QMLV
8601401CA
5962-9679801VCA
LM119JRQMLV
HIGH DOSE RATE (Note 13)
5962R9679801VCA
100 krad(Si)
LM119JRLQMLV
ELDRS FREE (Note 14)
5962R9679802VCA
100 krad(Si)
J14A
14LD CERDIP
LM119W/883
W10A
W10A
W10A
W10A
10LD CERPAK
10LD CERPAK
10LD CERPAK
10LD CERPAK
LM119W-SMD
LM119W-QMLV
8601401HA
5962-9679801VHA
LM119WRQMLV
HIGH DOSE RATE (Note 13)
5962R9679801VHA
100 krad(Si)
LM119WRLQMLV
ELDRS FREE (Note 14)
5962R9679802VHA
100 krad(Si)
W10A
10LD CERPAK
LM119WG/883
WG10A
WG10A
WG10A
10LD Ceramic SOIC
10LD Ceramic SOIC
10LD Ceramic SOIC
LM119WG-QMLV
5962-9679801VXA
LM119WGRQMLV
HIGH DOSE RATE (Note 14)
5962R9679801VXA
100 krad(Si)
© 2009 National Semiconductor Corporation
201437
www.national.com
NS Part Number
SMD Part Number
NS Package Number
Package Description
LM119WGRLQMLV
ELDRS FREE (Note 14)
5962R9679802VXA
100 krad(Si)
WG10A
10LD Ceramic SOIC
LM119 MDE
ELDRS FREE DIE
(Notes 1, 14)
5962R9679802V9A
100 krad(Si)
LM119 MDR
HIGH DOSE RATE DIE
(Notes 1, 13)
5962R9679801V9A
100 krad(Si)
Note 1: FOR ADDITIONAL DIE INFORMATION, PLEASE VISIT THE HI REL WEB SITE AT: www.national.com/analog/space/level_die
Connection Diagrams
Dual-In-Line Package
Leadless Chip Carrier
20143704
20143708
Top View
Top View
See NS Package Number E20A
See NS Package Number J14A
Metal Can Package
20143709
See NS Package Number W10A, WG10A
20143707
Case is connected to pin 5 (V−)
Top View
See NS Package Number H10C
www.national.com
2
Schematic Diagram
20143701
*Do not operate the LM119 with more than 16V between GND and V+
3
www.national.com
Absolute Maximum Ratings (Note 2)
Total Supply Voltage
36V
36V
25V
18V
±5V
Output to Negative Supply Voltage
Ground to Negative Supply Voltage
Ground to Positive Supply Voltage
Differential Input Voltage
Input Voltage (Note 4)
±15V
500 mW
10 sec
Power Dissipation (Note 3)
Output Short Circuit Duration
Storage Temperature Range
−65°C ≤ TA ≤ 150°C
−55°C ≤ TA ≤ 125°C
150°C
Operating Ambient Temperature Range
Maximum Junction Temperature (TJ)
Lead Temperature (Soldering, 10 sec.)
Thermal Resistance
ꢀθJA
260°C
E Package (Still Air)
E Package (500LF/Min Air flow)
H Package (Still Air)
H Package (500LF/Min Air flow)
J Package (Still Air)
J Package (500LF/Min Air flow)
W Package (Still Air)
W Package (500LF/Min Air flow)
WG Package (Still Air)
WG Package (500LF/Min Air flow)
ꢀθJC
89°C/W
63°C/W
162°C/W
88°C/W
94°C/W
52°C/W
215°C/W
132°C/W
215°C/W
132°C/W
E Package
H Package
J Package
W Package
5°C/W
31°C/W
11°C/W
13°C/W
13°C/W
WG Package
Package Weight
E Package
H Package
TBD
TBD
J Package
TBD
W Package
TBD
WG Package
ESD rating (Note 5)
225mg
800V
www.national.com
4
Quality Conformance Inspection
Mil-Std-883, Method 5005 - Group A
Subgroup
Description
Static tests at
Temp °C
25
1
2
Static tests at
125
-55
25
3
Static tests at
4
Dynamic tests at
Dynamic tests at
Dynamic tests at
Functional tests at
Functional tests at
Functional tests at
Switching tests at
Switching tests at
Switching tests at
Settling time at
Settling time at
Settling time at
5
125
-55
25
6
7
8A
8B
9
125
-55
25
10
11
12
13
14
125
-55
25
125
-55
5
www.national.com
LM119/883 Electrical Characteristics
DC Parameters
The following conditions apply, unless otherwise specified. VCM = 0V
Sub-
groups
Symbol
+ICC
Parameter
Conditions
Notes
Min Max
Units
Positive Supply Current
±VCC = ±15V, VO = Low
V+ = 5.6V thru 1.4KΩ
±VCC = ±15V, VO = Low
V+ = 5.6V thru 1.4KΩ
+VCC = 15V, -VCC = -1V,
VGnd = 0V, VO = 35V,
VI = 5mV
11
11.5
-4.2
mA
mA
mA
mA
µA
1
2
-ICC
Negative Supply Current
Output Leakage Current
1
-4.5
2
ILeak
1.8
1
9.5
µA
2
10.0
0.475
0.95
0.475
.95
µA
3
IIB
Input Bias Current
Input Offset Voltage
±VCC = ±15V
µA
1
µA
2, 3
1
+VCC = 5V, −VCC = 0V,
VCM = 1.5V
µA
µA
2, 3
1
VIO
+VCC = 5V, −VCC = 0V,
VCM = 1V, RS ≤ 5KΩ
+VCC = 5V, −VCC = 0V,
VCM = 3V, RS ≤ 5KΩ
±VCC = ±15V, VCM = 12V,
RS ≤ 5KΩ
-3.8
-6.8
3.8
6.8
mV
mV
2, 3
-3.8
-6.8
3.8
6.8
mV
mV
1
2, 3
-3.8
-6.8
3.8
6.8
mV
mV
1
2, 3
±VCC = ±15V, VCM = -12V,
-3.8
-6.8
3.8
6.8
mV
mV
1
2, 3
RS ≤ 5KΩ
+VCC = 5V, −VCC = 0V, VCM = 1V
IIO
Input Offset Current
-75
75
nA
nA
nA
nA
nA
nA
nA
nA
V
1
2, 3
1
-100 100
-75 75
-100 100
-75 75
-100 100
-75 75
+VCC = 5V, −VCC = 0V, VCM = 3V
±VCC = ±15V, VCM = 12V
2, 3
1
2, 3
1
±VCC = ±15V, VCM = -12V
-100 100
1.5
2, 3
1
VSat
Output Saturation Voltage
Voltage Gain
±VCC = ±15V, IO = 25mA,
VI = -5mV
+VCC = 5V, −VCC = 0V,
IO= 4.0mA
(Note 12)
(Note 12)
0.4
0.6
V
V
K
1, 2
3
AV
±VCC = ±15V, Delta VO = 12V,
(Note 9), 10.5
(Note 10)
4
RL = 1.4KΩ
(Note 9),
(Note 10)
10
8.0
5.0
5.8
K
K
K
K
5, 6
4
+VCC = 5V, −VCC = 0V,
(Note 9),
(Note 11)
Delta VO = 4.5V, RL = 1.4KΩ
(Note 9),
(Note 11)
5
(Note 9),
(Note 11)
6
www.national.com
6
LM119-SMD Electrical Characteristics
SMD 8601401
DC Parameters
The following conditions apply, unless otherwise specified. VCM = 0V
Sub-
groups
Symbol
+ICC
Parameter
Conditions
Notes
Min Max
Units
Positive Supply Current
±VCC = ±15V, VO = Low
V+ = 5.6V thru 1.4KΩ
±VCC = ±15V, VO = Low
V+ = 5.6V thru 1.4KΩ
11
11.5
-4.2
mA
mA
mA
mA
mA
µA
1
2, 3
1
-ICC
Negative Supply Current
-4.5
2
-6.0
3
ILeak
IIB
Output Leakage Current
Input Bias Current
+VCC = 15V, -VCC = -1V,
VGnd = 0V, VO = 35V
(Note 6)
(Note 6)
1.8
1
10
µA
2, 3
1
±VCC = ±15V
0.475
0.95
0.475
.95
µA
µA
2, 3
1
+VCC = 5V
(Note 7)
(Note 7)
(Note 7)
µA
µA
2, 3
1
+VCC = 5V, VCM = 1V, RS ≤ 5KΩ
VIO
Input Offset Voltage
-3.8
-6.8
-3.8
-6.8
3.8
6.8
3.8
6.8
mV
mV
mV
mV
(Note 7)
(Note 7)
(Note 7)
2, 3
1
+VCC = 5V, VCM = 3V,
RS ≤ 5KΩ
2, 3
±VCC = ±15V, VCM = 12V,
-3.8
-6.8
3.8
6.8
mV
mV
1
2, 3
RS ≤ 5KΩ
±VCC = ±15V, VCM = -12V,
RS ≤ 5KΩ
-3.8
-6.8
3.8
6.8
mV
mV
1
2, 3
IIO
Input Offset Current
+VCC = 5V, VCM = 1V
(Note 7)
(Note 7)
(Note 7)
(Note 7)
-75
75
nA
nA
nA
nA
nA
nA
nA
nA
V
1
2, 3
1
-100 100
-75 75
-100 100
-75 75
-100 100
-75 75
-100 100
+VCC = 5V, VCM = 3V
±VCC = ±15V, VCM = 12V
±VCC = ±15V, VCM = -12V
+VCC = 5V
2, 3
1
2, 3
1
2, 3
1, 2, 3
VI
Input Voltage Range
(Note 7),
(Note 8)
1.0
3.0
±VCC = ±15V
(Note 8)
(Note 6)
-12
12
V
V
1, 2, 3
1, 2, 3
VSat
Output Saturation Voltage
±VCC = ±15V, IO = 25mA,
VI ≤ -5mV
1.5
+VCC = 3.5V, -VCC = -1V,
VI ≤ -6mV, IO ≤ 3.2mA
±VCC = ±15V, Delta VO = 12V,
RL = 1.4KΩ
0.4
0.6
V
V
1, 2
3
AV
Voltage Gain
(Note 9)
(Note 9)
10.5
10
K
K
K
4
5, 6
4
+VCC = 5V, -VCC = 0V,
(Note 7),
(Note 9)
8.0
Delta VO = 4.5V, RL = 1.4KΩ
(Note 7),
(Note 9)
5.0
5.8
80
K
K
5
6
4
(Note 7),
(Note 9)
CMRR
Common Mode Rejection Ratio ±VCC = ±15V, VCM = ±12V
dB
7
www.national.com
LM119 Electrical Characteristics SMD 5962-9679801, HIGH DOSE RATE
DC Parameters
The following conditions apply, unless otherwise specified. VCM = 0V
Sub-
groups
Symbol
+ICC
Parameter
Conditions
Notes
Min Max
Units
Positive Supply Current
±VCC = ±15V, VO = Low
V+ = 5.6V thru 1.4KΩ
±VCC = ±15V, VO = Low
V+ = 5.6V thru 1.4KΩ
11
11.5
-4.2
mA
mA
mA
mA
mA
µA
1
2, 3
1
-ICC
Negative Supply Current
-4.5
2
-6.0
3
ILeak
IIB
Output Leakage Current
Input Bias Current
+VCC = 15V, -VCC = -1V,
VGnd = 0V, VO = 35V
(Note 6)
(Note 6)
1.8
1
10
µA
2, 3
1
±VCC = ±15V
0.475
0.95
0.475
.95
µA
µA
2, 3
1
+VCC = 5V
(Note 7)
(Note 7)
(Note 7)
(Note 7)
(Note 7)
(Note 7)
µA
µA
2, 3
1
+VCC = 5V, VCM = 1V, RS ≤ 5KΩ
VIO
Input Offset Voltage
-3.8
-6.8
-3.8
-6.8
3.8
6.8
3.8
6.8
mV
mV
mV
mV
2, 3
1
+VCC = 5V, VCM = 3V,
RS ≤ 5KΩ
2, 3
±VCC = ±15V, VCM = 12V,
-3.8
-6.8
3.8
6.8
mV
mV
1
2, 3
RS ≤ 5KΩ
±VCC = ±15V, VCM = -12V,
RS ≤ 5KΩ
-3.8
-6.8
3.8
6.8
mV
mV
1
2, 3
IIO
Input Offset Current
+VCC = 5V, VCM = 1V
(Note 7)
(Note 7)
(Note 7)
(Note 7)
-75
75
nA
nA
nA
nA
nA
nA
nA
nA
V
1
2, 3
1
-100 100
-75 75
-100 100
-75 75
-100 100
-75 75
-100 100
+VCC = 5V, VCM = 3V
±VCC = ±15V, VCM = 12V
±VCC = ±15V, VCM = -12V
+VCC = 5V
2, 3
1
2, 3
1
2, 3
1, 2, 3
VI
Input Voltage Range
(Note 7),
(Note 8)
1.0
3.0
±VCC = ±15V
(Note 8)
(Note 6)
-12
12
V
V
1, 2, 3
1, 2, 3
VSat
Output Saturation Voltage
±VCC = ±15V, IO = 25mA,
VI ≤ -5mV
1.5
+VCC = 3.5V, -VCC = -1V,
VI ≤ -6mV, IO ≤ 3.2mA
±VCC = ±15V, Delta VO = 12V,
RL = 1.4KΩ
0.4
0.6
V
V
1, 2
3
AV
Voltage Gain
(Note 9)
(Note 9)
10.5
10
K
K
K
4
5, 6
4
+VCC = 5V, -VCC = 0V,
(Note 7),
(Note 9)
8.0
Delta VO = 4.5V, RL = 1.4KΩ
(Note 7),
(Note 9)
5.0
5.8
80
K
K
5
6
4
(Note 7),
(Note 9)
CMRR
Common Mode Rejection Ratio ±VCC = ±15V, VCM = ±12V
dB
www.national.com
8
SMD 5962-9679801, HIGH DOSE RATE DC DELTA Parameters
The following conditions apply, unless otherwise specified.
VCM = 0V, Delta calculations performed on QMLV devices at group B, subgroup 5 only.
Sub-
groups
Symbol
+ICC
Parameter
Conditions
Notes
Min Max
Units
Positive Supply Current
±VCC = ±15V, VO = Low
V+ = 5.6V thru 1.4KΩ
±VCC = ±15V, VO = Low
V+ = 5.6V thru 1.4KΩ
-1.0
-0.5
-0.4
1.0
0.5
0.4
mA
1
1
1
-ICC
VIO
Negative Supply Current
Input Offset Voltage
mA
mV
+VCC = 5V, VCM = 1V, RS ≤ 5KΩ
SMD 5962-9679801, High Dose Rate
100K Post Radiation Parameters @ 25°C
(Note 13)
The following conditions apply, unless otherwise specified. VCM = 0V
Sub-
groups
Symbol
IIB
Parameter
Input Bias Current
Conditions
Notes
Min Max
Units
±VCC = ±15V
VCC = 5V
1.0
1.0
µA
µA
1
1
1
+VCC = 5V, VCM = 1V, RS ≤ 5KΩ
+VCC = 5V, VCM = 3V, RS ≤ 5KΩ
VIO
Input Offset Voltage
-4.0
-4.0
-4.0
4.0
4.0
4.0
mV
mV
mV
1
1
±VCC = ±15V, VCM = 12V, RS ≤
5KΩ
-4.0
4.0
mV
1
±VCC = ±15V, VCM = −12V, RS ≤
5KΩ
9
www.national.com
LM119 Electrical Characteristics SMD 5962-9679802, ELDRS FREE
DC Parameters
The following conditions apply, unless otherwise specified. VCM = 0V
Sub-
groups
Symbol
+ICC
Parameter
Conditions
Notes
Min Max
Units
Positive Supply Current
±VCC = ±15V, VO = Low
V+ = 5.6V thru 1.4KΩ
±VCC = ±15V, VO = Low
V+ = 5.6V thru 1.4KΩ
11
11.5
-4.2
mA
mA
mA
mA
mA
µA
1
2, 3
1
-ICC
Negative Supply Current
-4.5
2
-6.0
3
ILeak
IIB
Output Leakage Current
Input Bias Current
+VCC = 15V, -VCC = -1V,
VGnd = 0V, VO = 35V
(Note 6)
(Note 6)
1.8
1
10
µA
2, 3
1
±VCC = ±15V
0.475
0.95
0.475
.95
µA
µA
2, 3
1
+VCC = 5V
(Note 7)
(Note 7)
(Note 7)
(Note 7)
(Note 7)
(Note 7)
µA
µA
2, 3
1
+VCC = 5V, VCM = 1V, RS ≤ 5KΩ
VIO
Input Offset Voltage
-3.8
-6.8
-3.8
-6.8
3.8
6.8
3.8
6.8
mV
mV
mV
mV
2, 3
1
+VCC = 5V, VCM = 3V,
RS ≤ 5KΩ
2, 3
±VCC = ±15V, VCM = 12V,
-3.8
-6.8
3.8
6.8
mV
mV
1
2, 3
RS ≤ 5KΩ
±VCC = ±15V, VCM = -12V,
RS ≤ 5KΩ
-3.8
-6.8
3.8
6.8
mV
mV
1
2, 3
IIO
Input Offset Current
+VCC = 5V, VCM = 1V
(Note 7)
(Note 7)
(Note 7)
(Note 7)
-75
75
nA
nA
nA
nA
nA
nA
nA
nA
V
1
2, 3
1
-100 100
-75 75
-100 100
-75 75
-100 100
-75 75
-100 100
+VCC = 5V, VCM = 3V
±VCC = ±15V, VCM = 12V
±VCC = ±15V, VCM = -12V
+VCC = 5V
2, 3
1
2, 3
1
2, 3
1, 2, 3
VI
Input Voltage Range
(Note 8),
(Note 8)
1.0
3.0
±VCC = ±15V
(Note 8)
(Note 6)
-12
12
V
V
1, 2, 3
1, 2, 3
VSat
Output Saturation Voltage
±VCC = ±15V, IO = 25mA,
VI ≤ -5mV
1.5
+VCC = 3.5V, -VCC = -1V,
VI ≤ -6mV, IO ≤ 3.2mA
±VCC = ±15V, Delta VO = 12V,
RL = 1.4KΩ
0.4
0.6
V
V
1, 2
3
AV
Voltage Gain
(Note 9)
(Note 9)
10.5
10
K
K
K
4
5, 6
4
+VCC = 5V, -VCC = 0V,
(Note 7),
(Note 9)
8.0
Delta VO = 4.5V, RL = 1.4KΩ
(Note 7),
(Note 9)
5.0
5.8
80
K
K
5
6
4
(Note 7),
(Note 9)
CMRR
Common Mode Rejection Ratio ±VCC = ±15V, VCM = ±12V
dB
www.national.com
10
SMD 5962-9679802, ELDRS FREE DC DELTA Parameters
The following conditions apply, unless otherwise specified.
VCM = 0V, Delta calculations performed on QMLV devices at group B, subgroup 5 only.
Sub-
groups
Symbol
+ICC
Parameter
Conditions
Notes
Min Max
Units
Positive Supply Current
±VCC = ±15V, VO = Low
V+ = 5.6V thru 1.4KΩ
±VCC = ±15V, VO = Low
V+ = 5.6V thru 1.4KΩ
-1.0
-0.5
-0.4
1.0
0.5
0.4
mA
1
1
1
-ICC
VIO
Negative Supply Current
Input Offset Voltage
mA
mV
+VCC = 5V, VCM = 1V, RS ≤ 5KΩ
SMD 5962-9679802, ELDRS FREE 100K Post Radiation Parameters @ 25°C
(Note 14)
The following conditions apply, unless otherwise specified. VCM = 0V
Sub-
groups
Symbol
IIB
Parameter
Input Bias Current
Conditions
±VCC = ±15V
Notes
Min Max
Units
1.0
1.0
µA
µA
1
1
1
VCC = 5V
+VCC = 5V, VCM = 1V, RS ≤ 5KΩ
+VCC = 5V, VCM = 3V, RS ≤ 5KΩ
VIO
Input Offset Voltage
-4.0
-4.0
-4.0
4.0
4.0
4.0
mV
mV
mV
1
1
±VCC = ±15V, VCM = 12V, RS ≤
5KΩ
-4.0
4.0
mV
1
±VCC = ±15V, VCM = −12V, RS ≤
5KΩ
Note 2: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is
functional, but do not guarantee specific performance limits. For guaranteed specifications and test conditions, see the Electrical Characteristics. The guaranteed
specifications apply only for the test conditions listed. Some performance characteristics may degrade when the device is not operated under the listed test
conditions.
Note 3: The maximum power dissipation must be derated at elevated temperatures and is dictated by TJmax (maximum junction temperature), θJA (package
junction to ambient thermal resistance), and TA (ambient temperature). The maximum allowable power dissipation at any temperature is PDmax = (TJmax - TA)/
θ
JA or the number given in the Absolute Maximum Ratings, whichever is lower.
Note 4: For supply voltages less than ±15V the absolute maximum input voltage is equal to the supply voltage.
Note 5: Human Body model, 1.5KΩ in series with 100pF.
Note 6: VI ≥ 8mV at extremes for ILeak and VI ≤ −8mV at extremes for VSat (VI to exceed VOS
.
Note 7: 5V differential across +VCC and −VCC
.
Note 8: Parameter guaranteed by VIO and IIO tests.
Note 9: K = V/mV.
Note 10: Gain is computed with an output swing from +13.5V to +1.5V.
Note 11: Gain is computed with an output swing from +5.0V to +0.5V.
Note 12: Output is monitored by measuring VI with limits from 0 to 6mV at all temperatures
Note 13: Pre and post irradiation limits are identical to those listed under AC and DC electrical characteristics except as listed in the Post Radiation Limits Table.
These parts may be dose rate sensitive in a space environment and demonstrate enhanced low dose rate sensitivity. Radiation end point limits for the noted
parameters are guaranteed only for the conditions as specified in MIL-STD-883, per Test Method 1019, Condition A.
Note 14: Pre and post irradiation limits are identical to those listed under AC and DC electrical characteristics except as listed in the Post Radiation Limits Table.
Low dose rate testing has been performed on a wafer-by-wafer basis, per Test Method 1019, Condition D of MIL-STD-883, with no enhanced low dose rate
sensitivity (ELDRS).
11
www.national.com
Typical Performance Characteristics
Input Currents
Common Mode Limits
20143710
20143711
Transfer Function
Response Time for Various
Input Overdrives
20143712
20143713
Response Time for Various
Input Overdrives
Input Characteristics
20143715
20143714
www.national.com
12
Response Time for Various
Input Overdrives
Response Time for Various
Input Overdrives
20143716
20143717
Output Saturation Voltage
Supply Current
20143718
20143719
Supply Current
Output Limiting
Characteristics
20143720
20143721
13
www.national.com
Typical Applications (Note Pin numbers are for metal can package. )
Relay Driver
20143705
Note 15: Pin numbers are for metal can package.
Window Detector
20143706
VOUT = 5V for VLT ≤ VIN ≤ VUT
VOUT = 0 for VIN ≤ VLTor VIN ≥ VUT
www.national.com
14
Revision History
Date Released Revision
Section
New release to corporate format
Originator
Changes
07/24/08
A
L. Lytle
2 MDS datasheets converted into one
corporate data sheet format. Added Radiation
information. MDS data sheets MNLM119-X
Rev. 0F1 & MDLM119-X Rev 2A2 will be
archived.
01/13/09
B
Features, Ordering Info., Electrical
Section, Notes 13 and 14
Larry McGee Added reference to ELDRS and Die NSID's to
data sheet. Correction from: 100k rd(Si) to 100
krad(Si) in ordering info. Changed wording in
Notes 13 and 14 Revision A will be Archived.
15
www.national.com
Physical Dimensions inches (millimeters) unless otherwise noted
Metal Can Package (H)
NS Package Number H10C
Cavity Dual-In-Line Package (J)
NS Package Number J14A
www.national.com
16
Ceramic Flatpack (W)
NS Package Number W10A
Ceramic SOIC (WG)
NS Package Number WG10A
17
www.national.com
Metal Leadless Chip Carrier (LCC)
NS Package Number E20A
www.national.com
18
Notes
19
www.national.com
Notes
For more National Semiconductor product information and proven design tools, visit the following Web sites at:
Products
www.national.com/amplifiers
Design Support
Amplifiers
WEBENCH® Tools
App Notes
www.national.com/webench
www.national.com/appnotes
www.national.com/refdesigns
www.national.com/samples
www.national.com/evalboards
www.national.com/packaging
www.national.com/quality/green
www.national.com/contacts
Audio
www.national.com/audio
www.national.com/timing
www.national.com/adc
www.national.com/interface
www.national.com/lvds
www.national.com/power
www.national.com/switchers
www.national.com/ldo
Clock and Timing
Data Converters
Interface
Reference Designs
Samples
Eval Boards
LVDS
Packaging
Power Management
Switching Regulators
LDOs
Green Compliance
Distributors
Quality and Reliability www.national.com/quality
LED Lighting
Voltage Reference
PowerWise® Solutions
www.national.com/led
Feedback/Support
Design Made Easy
Solutions
www.national.com/feedback
www.national.com/easy
www.national.com/vref
www.national.com/powerwise
www.national.com/solutions
www.national.com/milaero
www.national.com/solarmagic
www.national.com/AU
Serial Digital Interface (SDI) www.national.com/sdi
Mil/Aero
Temperature Sensors
Wireless (PLL/VCO)
www.national.com/tempsensors Solar Magic®
www.national.com/wireless
Analog University®
THE CONTENTS OF THIS DOCUMENT ARE PROVIDED IN CONNECTION WITH NATIONAL SEMICONDUCTOR CORPORATION
(“NATIONAL”) PRODUCTS. NATIONAL MAKES NO REPRESENTATIONS OR WARRANTIES WITH RESPECT TO THE ACCURACY
OR COMPLETENESS OF THE CONTENTS OF THIS PUBLICATION AND RESERVES THE RIGHT TO MAKE CHANGES TO
SPECIFICATIONS AND PRODUCT DESCRIPTIONS AT ANY TIME WITHOUT NOTICE. NO LICENSE, WHETHER EXPRESS,
IMPLIED, ARISING BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS
DOCUMENT.
TESTING AND OTHER QUALITY CONTROLS ARE USED TO THE EXTENT NATIONAL DEEMS NECESSARY TO SUPPORT
NATIONAL’S PRODUCT WARRANTY. EXCEPT WHERE MANDATED BY GOVERNMENT REQUIREMENTS, TESTING OF ALL
PARAMETERS OF EACH PRODUCT IS NOT NECESSARILY PERFORMED. NATIONAL ASSUMES NO LIABILITY FOR
APPLICATIONS ASSISTANCE OR BUYER PRODUCT DESIGN. BUYERS ARE RESPONSIBLE FOR THEIR PRODUCTS AND
APPLICATIONS USING NATIONAL COMPONENTS. PRIOR TO USING OR DISTRIBUTING ANY PRODUCTS THAT INCLUDE
NATIONAL COMPONENTS, BUYERS SHOULD PROVIDE ADEQUATE DESIGN, TESTING AND OPERATING SAFEGUARDS.
EXCEPT AS PROVIDED IN NATIONAL’S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, NATIONAL ASSUMES NO
LIABILITY WHATSOEVER, AND NATIONAL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY RELATING TO THE SALE
AND/OR USE OF NATIONAL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR
PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY
RIGHT.
LIFE SUPPORT POLICY
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR
SYSTEMS WITHOUT THE EXPRESS PRIOR WRITTEN APPROVAL OF THE CHIEF EXECUTIVE OFFICER AND GENERAL
COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein:
Life support devices or systems are devices which (a) are intended for surgical implant into the body, or (b) support or sustain life and
whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected
to result in a significant injury to the user. A critical component is any component in a life support device or system whose failure to perform
can be reasonably expected to cause the failure of the life support device or system or to affect its safety or effectiveness.
National Semiconductor and the National Semiconductor logo are registered trademarks of National Semiconductor Corporation. All other
brand or product names may be trademarks or registered trademarks of their respective holders.
Copyright© 2009 National Semiconductor Corporation
For the most current product information visit us at www.national.com
National Semiconductor
Americas Technical
Support Center
Email: support@nsc.com
Tel: 1-800-272-9959
National Semiconductor Europe
Technical Support Center
Email: europe.support@nsc.com
German Tel: +49 (0) 180 5010 771
English Tel: +44 (0) 870 850 4288
National Semiconductor Asia
Pacific Technical Support Center
Email: ap.support@nsc.com
National Semiconductor Japan
Technical Support Center
Email: jpn.feedback@nsc.com
www.national.com
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Audio
Applications
www.ti.com/audio
amplifier.ti.com
dataconverter.ti.com
www.dlp.com
Communications and Telecom www.ti.com/communications
Amplifiers
Data Converters
DLP® Products
DSP
Computers and Peripherals
Consumer Electronics
Energy and Lighting
Industrial
www.ti.com/computers
www.ti.com/consumer-apps
www.ti.com/energy
dsp.ti.com
www.ti.com/industrial
www.ti.com/medical
www.ti.com/security
Clocks and Timers
Interface
www.ti.com/clocks
interface.ti.com
logic.ti.com
Medical
Security
Logic
Space, Avionics and Defense www.ti.com/space-avionics-defense
Transportation and Automotive www.ti.com/automotive
Power Mgmt
Microcontrollers
RFID
power.ti.com
microcontroller.ti.com
www.ti-rfid.com
Video and Imaging
www.ti.com/video
OMAP Mobile Processors www.ti.com/omap
Wireless Connectivity www.ti.com/wirelessconnectivity
TI E2E Community Home Page
e2e.ti.com
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2011, Texas Instruments Incorporated
相关型号：
LM119E/883
IC DUAL COMPARATOR, 4000 uV OFFSET-MAX, 80 ns RESPONSE TIME, CQCC20, LCC-20, Comparator
NSC
©2020 ICPDF网 联系我们和版权申明