LM1558 [TI]
Dual Operational Amplifier;型号: | LM1558 |
厂家: | TEXAS INSTRUMENTS |
描述: | Dual Operational Amplifier |
文件: | 总12页 (文件大小:845K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
LM1458, LM1558
www.ti.com
SNOSBU4D –APRIL 1998–REVISED MARCH 2013
LM1458/LM1558 Dual Operational Amplifier
Check for Samples: LM1458, LM1558
1
FEATURES
2
•
•
•
No Frequency Compensation Required
•
•
•
Low-Power Consumption
Short-Circuit Protection
8-Lead TO-99 and 8-Lead PDIP
Wide Common-Mode and Differential Voltage
Ranges
No Latch Up When Input Common Mode
Range is Exceeded
DESCRIPTION
The LM1458 and the LM1558 are general purpose dual operational amplifiers. The two amplifiers share a
common bias network and power supply leads. Otherwise, their operation is completely independent.
The LM1458 is identical to the LM1558 except that the LM1458 has its specifications guaranteed over the
temperature range from 0°C to +70°C instead of −55°C to +125°C.
Connection Diagram
Figure 1. TO-99 Package
(Top View)
See Package Number LMC (O-MBCY-W8)
Figure 2. Dual-In-Line Package
(Top View)
See Package Number D (R-PDSO-G8) or
P (R-PDIP-T8)
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 1998–2013, Texas Instruments Incorporated
LM1458, LM1558
SNOSBU4D –APRIL 1998–REVISED MARCH 2013
www.ti.com
Absolute Maximum Ratings(1)(2)(3)
Supply Voltage
LM1558
±22V
±18V
LM1458
(4)
Power Dissipation
LM1558H/LM1458H
LM1458N
500 mW
400 mW
±30V
Differential Input Voltage
(5)
Input Voltage
±15V
Output Short-Circuit Duration
Continuous
Operating Temperature Range
LM1558
LM1458
−55°C to +125°C
0°C to +70°C
Storage Temperature Range
Lead Temperature (Soldering, 10 sec.)
Soldering Information
−65°C to +150°C
260°C
PDIP Package
Soldering (10 seconds)
SOIC Package
260°C
Vapor Phase (60 seconds)
Infrared (15 seconds)
215°C
220°C
See AN-450 “Surface Mounting Methods and Their Effect on Product Reliability” for other methods of soldering surface mount devices.
(6)
ESD tolerance
300V
(1) “Absolute Maximum Ratings” indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is functional, but do not guarantee specific performance limits.
(2) Refer to RETS 1558V for LM1558J and LM1558H military specifications.
(3) If Military/Aerospace specified devices are required, please contact the TI Sales Office/Distributors for availability and specifications.
(4) The maximum junction temperature of the LM1558 is 150°C, while that of the LM1458 is 100°C. For operating at elevated temperatures,
devices in the LMC package must be derated based on a thermal resistance of 150°C/W, junction to ambient or 20°C/W, junction to
case. For the PDIP the device must be derated based on a thermal resistance of 187°C/W, junction to ambient.
(5) For supply voltages less than ±15V, the absolute maximum input voltage is equal to the supply voltage.
(6) Human body model, 1.5 kΩ in series with 100 pF.
(1)
Electrical Characteristics
Parameter
Conditions
LM1558
Typ
1.0
LM1458
Typ
1.0
Units
Min
Max
5.0
Min
Max
6.0
Input Offset Voltage
TA = 25°C, RS ≤ 10 kΩ
TA = 25°C
mV
nA
Input Offset Current
Input Bias Current
Input Resistance
80
200
500
80
200
500
TA = 25°C
200
1.0
200
1.0
nA
TA = 25°C
0.3
50
0.3
20
MΩ
Supply Current Both
Amplifiers
TA = 25°C, VS = ±15V
3.0
5.0
3.0
5.6
mA
Large Signal Voltage Gain
TA = 25°C, VS = ±15V
160
160
V/mV
VOUT = ±10V, RL ≥ 2 kΩ
Input Offset Voltage
Input Offset Current
Input Bias Current
RS ≤ 10 kΩ
6.0
500
1.5
7.5
300
0.8
mV
nA
μA
Large Signal Voltage Gain
VS = ±15V, VOUT = ±10V
L ≥ kΩ
25
15
V/mV
R
Output Voltage Swing
VS = ±15V, RL = 10 kΩ
RL = 2 kΩ
±12
±10
±14
±13
±12
±10
±14
±13
V
V
(1) These specifications apply for VS = ±15V and −55°C ≤ TA ≤ 125°C, unless otherwise specified. With the LM1458, however, all
specifications are limited to 0°C ≤ TA ≤ 70°C and VS = ±15V.
2
Submit Documentation Feedback
Copyright © 1998–2013, Texas Instruments Incorporated
Product Folder Links: LM1458 LM1558
LM1458, LM1558
www.ti.com
SNOSBU4D –APRIL 1998–REVISED MARCH 2013
Electrical Characteristics (1) (continued)
Parameter
Conditions
LM1558
Typ
LM1458
Typ
Units
Min
Max
Min
Max
Input Voltage Range
VS = ±15V
±12
±12
V
Common Mode
Rejection Ratio
R
S ≤ 10 kΩ
70
77
90
96
70
77
90
96
dB
Supply Voltage
Rejection Ratio
RS ≤ 10 kΩ
dB
SCHEMATIC DIAGRAM
Numbers in parentheses are pin numbers for amplifier B.
Copyright © 1998–2013, Texas Instruments Incorporated
Submit Documentation Feedback
3
Product Folder Links: LM1458 LM1558
LM1458, LM1558
SNOSBU4D –APRIL 1998–REVISED MARCH 2013
www.ti.com
REVISION HISTORY
Changes from Revision C (March 2013) to Revision D
Page
•
Changed layout of National Data Sheet to TI format ............................................................................................................ 3
4
Submit Documentation Feedback
Copyright © 1998–2013, Texas Instruments Incorporated
Product Folder Links: LM1458 LM1558
PACKAGE OPTION ADDENDUM
www.ti.com
27-Jul-2013
PACKAGING INFORMATION
Orderable Device
LM1458M
Status Package Type Package Pins Package
Eco Plan Lead/Ball Finish
MSL Peak Temp
Op Temp (°C)
0 to 70
Device Marking
Samples
Drawing
Qty
(1)
(2)
(3)
(4/5)
ACTIVE
SOIC
SOIC
SOIC
SOIC
D
8
8
8
8
95
TBD
Call TI
CU SN
Call TI
CU SN
Call TI
LM
1458M
LM1458M/NOPB
LM1458MX
ACTIVE
ACTIVE
ACTIVE
D
D
D
95
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
Call TI
0 to 70
LM
1458M
2500
2500
TBD
0 to 70
LM
1458M
LM1458MX/NOPB
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
0 to 70
LM
1458M
LM1458N
ACTIVE
ACTIVE
PDIP
PDIP
P
P
8
8
40
40
TBD
Call TI
CU SN
Call TI
0 to 70
0 to 70
LM1458N
LM1458N/NOPB
Green (RoHS
& no Sb/Br)
Level-1-NA-UNLIM
LM1458N
LM1558H
ACTIVE
ACTIVE
TO-99
TO-99
LMC
LMC
8
8
500
500
TBD
Call TI
Call TI
-55 to 125
-55 to 125
LM1558H
LM1558H
LM1558H/NOPB
Green (RoHS POST-PLATE
& no Sb/Br)
Level-1-NA-UNLIM
MC1458CP1
MC1458P1
MC1558G
ACTIVE
ACTIVE
ACTIVE
PDIP
PDIP
P
P
8
8
8
40
40
TBD
TBD
TBD
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
0 to 70
0 to 70
LM1458N
LM1458N
LM1558H
TO-99
LMC
500
-55 to 125
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
27-Jul-2013
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.
(5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com
8-Apr-2013
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
B0
K0
P1
W
Pin1
Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant
(mm) W1 (mm)
LM1458MX
SOIC
SOIC
D
D
8
8
2500
2500
330.0
330.0
12.4
12.4
6.5
6.5
5.4
5.4
2.0
2.0
8.0
8.0
12.0
12.0
Q1
Q1
LM1458MX/NOPB
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
8-Apr-2013
*All dimensions are nominal
Device
Package Type Package Drawing Pins
SPQ
Length (mm) Width (mm) Height (mm)
LM1458MX
SOIC
SOIC
D
D
8
8
2500
2500
349.0
349.0
337.0
337.0
45.0
45.0
LM1458MX/NOPB
Pack Materials-Page 2
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.
Products
Applications
Audio
www.ti.com/audio
amplifier.ti.com
dataconverter.ti.com
www.dlp.com
Automotive and Transportation www.ti.com/automotive
Communications and Telecom www.ti.com/communications
Amplifiers
Data Converters
DLP® Products
DSP
Computers and Peripherals
Consumer Electronics
Energy and Lighting
Industrial
www.ti.com/computers
www.ti.com/consumer-apps
www.ti.com/energy
dsp.ti.com
Clocks and Timers
Interface
www.ti.com/clocks
interface.ti.com
logic.ti.com
www.ti.com/industrial
www.ti.com/medical
Medical
Logic
Security
www.ti.com/security
Power Mgmt
Microcontrollers
RFID
power.ti.com
Space, Avionics and Defense
Video and Imaging
www.ti.com/space-avionics-defense
www.ti.com/video
microcontroller.ti.com
www.ti-rfid.com
www.ti.com/omap
OMAP Applications Processors
Wireless Connectivity
TI E2E Community
e2e.ti.com
www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2013, Texas Instruments Incorporated
相关型号:
LM1558H/883B
IC DUAL OP-AMP, 5000 uV OFFSET-MAX, MBCY8, METAL CAN, TO-99, 8 PIN, Operational Amplifier
NSC
©2020 ICPDF网 联系我们和版权申明