LM4040D10ILPRE3 [TI]

IC,VOLT REFERENCE,FIXED,10V,BIPOLAR,SIP,3PIN,PLASTIC;


型号：	LM4040D10ILPRE3
厂家：	TEXAS INSTRUMENTS
描述：	IC,VOLT REFERENCE,FIXED,10V,BIPOLAR,SIP,3PIN,PLASTIC
文件：	总55页 (文件大小：1289K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

LM4040

www.ti.com .................................................................................................................................................. SLOS456K–JANUARY 2005–REVISED MARCH 2008

PRECISION MICROPOWER SHUNT VOLTAGE REFERENCE

FEATURES

DBZ (SOT-23) PACKAGE

•

Fixed Output Voltages of 2.048 V, 2.5 V, 3 V,

4.096 V, 5 V, 8.192 V, and 10 V

(TOP VIEW)

•

Tight Output Tolerances and Low Temperature

Coefficient

CATHODE

ANODE

–

Max 0.1%, 100 ppm/°C – A Grade

Max 0.2%, 100 ppm/°C – B Grade

Max 0.5%, 100 ppm/°C – C Grade

Max 1.0%, 150 ppm/°C – D Grade

* Pin 3 is attached to substrate and must be

connected to ANODE or left open.

DCK (SC-70) PACKAGE

(TOP VIEW)

•

Low Output Noise…35 μV_RMSTyp

Wide Operating Current Range…45 μA Typ to

15 mA

ANODE

•

Stable With All Capacitive Loads; No Output

Capacitor Required

CATHODE

Available in Extended Temperature

Range…–40°C to 125°C

NC – No internal connection

APPLICATIONS

LP (TO-92/TO-226) PACKAGE

(TOP VIEW)

•

Data-Acquisition Systems

Power Supplies and Power-Supply Monitors

Instrumentation and Test Equipment

Process Controls

Precision Audio

Automotive Electronics

ANODE

CATHODE

Energy Management

Battery-Powered Equipment

NC – No internal connection

DESCRIPTION/ORDERING INFORMATION

The LM4040 series of shunt voltage references are versatile, easy-to-use references that cater to a vast array of

applications. The 2-pin fixed-output device requires no external capacitors for operation and is stable with all

capacitive loads. Additionally, the reference offers low dynamic impedance, low noise, and low temperature

coefficient to ensure a stable output voltage over a wide range of operating currents and temperatures. The

LM4040 uses fuse and Zener-zap reverse breakdown voltage trim during wafer sort to offer four output voltage

tolerances, ranging from 0.1% (max) for the A grade to 1% (max) for the D grade. Thus, a great deal of flexibility

is offered to designers in choosing the best cost-to-performance ratio for their applications.

Packaged in space-saving SC-70 and SOT-23-3 packages and requiring a minimum current of 45 μA (typ), the

LM4040 also is ideal for portable applications. The LM4040xI is characterized for operation over an ambient

temperature range of –40°C to 85°C. The LM4040xQ is characterized for operation over an ambient temperature

range of –40°C to 125°C.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

UNLESS OTHERWISE NOTED this document contains

PRODUCTION DATA information current as of publication date.

Products conform to specifications per the terms of Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.

LM4040

SLOS456K–JANUARY 2005–REVISED MARCH 2008 .................................................................................................................................................. www.ti.com

ORDERING INFORMATION⁽¹⁾

DEVICE

GRADE

ORDERABLE

PART NUMBER

TOP-SIDE

T_A

V_KA

PACKAGE⁽²⁾

MARKING⁽³⁾

SC-70 (DCK)

Reel of 3000

LM4040A20IDCKR

LM4040A20IDBZR

LM4040A20IDBZT

LM4040A20ILP

MS_

Reel of 3000

Reel of 250

Bulk of 1000

Reel of 2000

Reel of 3000

Reel of 250

Bulk of 1000

Reel of 2000

Reel of 3000

Reel of 250

Bulk of 1000

Reel of 2000

Reel of 3000

Reel of 250

Bulk of 1000

Reel of 2000

Reel of 3000

Reel of 250

Bulk of 1000

Reel of 2000

Reel of 3000

Reel of 250

Bulk of 1000

Reel of 2000

Reel of 3000

Reel of 250

Bulk of 1000

Reel of 2000

SOT-23-3 (DBZ)

4MC_

2.048 V

TO-92/TO-226 (LP)

SC-70 (DCK)

PREVIEW

P2_

LM4040A20ILPR

LM4040A25IDCKR

LM4040A25IDBZR

LM4040A25IDBZT

LM4040A25ILP

SOT-23-3 (DBZ)

4NG_

2.5 V

TO-92/TO-226 (LP)

SC-70 (DCK)

PREVIEW

P9_

LM4040A25ILPR

LM4040A30IDCKR

LM4040A30IDBZR

LM4040A30IDBZT

LM4040A30ILP

SOT-23-3 (DBZ)

4M6_

3 V

TO-92/TO-226 (LP)

SC-70 (DCK)

PREVIEW

P4_

LM4040A30ILPR

LM4040A41IDCKR

LM4040A41IDBZR

LM4040A41IDBZT

LM4040A41ILP

A grade:

0.1% initial

accuracy

and

SOT-23-3 (DBZ)

4M2_

–40°C to 85°C

4.096 V

100 ppm/°C

temperature

coefficient

TO-92/TO-226 (LP)

SC-70 (DCK)

PREVIEW

N5_

LM4040A41ILPR

LM4040A50IDCKR

LM4040A50IDBZR

LM4040A50IDBZT

LM4040A50ILP

SOT-23-3 (DBZ)

4NA_

5 V

TO-92/TO-226 (LP)

SC-70 (DCK)

PREVIEW

PD_

LM4040A50ILPR

LM4040A82IDCKR

LM4040A82IDBZR

LM4040A82IDBZT

LM4040A82ILP

SOT-23-3 (DBZ)

4NL_

8.192 V

TO-92/TO-226 (LP)

SC-70 (DCK)

PREVIEW

PH_

LM4040A82ILPR

LM4040A10IDCKR

LM4040A10IDBZR

LM4040A10IDBZT

LM4040A10ILP

SOT-23-3 (DBZ)

4NQ_

10 V

TO-92/TO-226 (LP)

PREVIEW

LM4040A10ILPR

(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI

web site at www.ti.com.

(2) Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.

(3) DBZ/DCK: The actual top-side marking has one additional character that designates the wafer fab/assembly site.

Submit Documentation Feedback

LM4040

ORDERING INFORMATION (continued)

DEVICE

GRADE

ORDERABLE

PART NUMBER

TOP-SIDE

T_A

V_KA

PACKAGE⁽²⁾

MARKING⁽³⁾

SC-70 (DCK)

Reel of 3000

LM4040B20IDCKR

LM4040B20IDBZR

LM4040B20IDBZT

LM4040B20ILP

MT_

Reel of 3000

Reel of 250

Bulk of 1000

Reel of 2000

Reel of 3000

Reel of 250

Bulk of 1000

Reel of 2000

Reel of 3000

Reel of 250

Bulk of 1000

Reel of 2000

Reel of 3000

Reel of 250

Bulk of 1000

Reel of 2000

Reel of 3000

Reel of 250

Bulk of 1000

Reel of 2000

Reel of 3000

Reel of 250

Bulk of 1000

Reel of 2000

Reel of 3000

Reel of 250

Bulk of 1000

Reel of 2000

SOT-23-3 (DBZ)

4MD_

2.048 V

TO-92/TO-226 (LP)

SC-70 (DCK)

PREVIEW

P3_

LM4040B20ILPR

LM4040B25IDCKR

LM4040B25IDBZR

LM4040B25IDBZT

LM4040B25ILP

SOT-23-3 (DBZ)

4NH_

2.5 V

TO-92/TO-226 (LP)

SC-70 (DCK)

PREVIEW

PA_

LM4040B25ILPR

LM4040B30IDCKR

LM4040B30IDBZR

LM4040B30IDBZT

LM4040B30ILP

SOT-23-3 (DBZ)

4M7_

3 V

TO-92/TO-226 (LP)

SC-70 (DCK)

PREVIEW

P5_

LM4040B30ILPR

LM4040B41IDCKR

LM4040B41IDBZR

LM4040B41IDBZT

LM4040B41ILP

B grade:

0.2% initial

accuracy

and

SOT-23-3 (DBZ)

4M3_

–40°C to 85°C

4.096 V

100 ppm/°C

temperature

coefficient

TO-92/TO-226 (LP)

SC-70 (DCK)

PREVIEW

MX_

LM4040B41ILPR

LM4040B50IDCKR

LM4040B50IDBZR

LM4040B50IDBZT

LM4040B50ILP

SOT-23-3 (DBZ)

4NB_

5 V

TO-92/TO-226 (LP)

SC-70 (DCK)

PREVIEW

PE_

LM4040B50ILPR

LM4040B82IDCKR

LM4040B82IDBZR

LM4040B82IDBZT

LM4040B82ILP

SOT-23-3 (DBZ)

4NM_

8.192 V

TO-92/TO-226 (LP)

SC-70 (DCK)

PREVIEW

PJ_

LM4040B82ILPR

LM4040B10IDCKR

LM4040B10IDBZR

LM4040B10IDBZT

LM4040B10ILP

SOT-23-3 (DBZ)

4NR_

10 V

TO-92/TO-226 (LP)

PREVIEW

LM4040B10ILPR

Submit Documentation Feedback

LM4040

ORDERING INFORMATION (continued)

DEVICE

GRADE

ORDERABLE

PART NUMBER

TOP-SIDE

T_A

V_KA

PACKAGE⁽²⁾

MARKING⁽³⁾

SC-70 (DCK)

Reel of 3000

LM4040C20IDCKR

LM4040C20IDBZR

LM4040C20IDBZT

LM4040C20ILP

MV_

Reel of 3000

Reel of 250

Bulk of 1000

Reel of 2000

Reel of 3000

Reel of 250

Bulk of 1000

Reel of 2000

Reel of 3000

Reel of 250

Bulk of 1000

Reel of 2000

Reel of 3000

Reel of 250

Bulk of 1000

Reel of 2000

Reel of 3000

Reel of 250

Bulk of 1000

Reel of 2000

Reel of 3000

Reel of 250

Bulk of 1000

Reel of 2000

Reel of 3000

Reel of 250

Bulk of 1000

Reel of 2000

SOT-23-3 (DBZ)

4MQ_

2.048 V

TO-92/TO-226 (LP)

SC-70 (DCK)

PREVIEW

MU_

LM4040C20ILPR

LM4040C25IDCKR

LM4040C25IDBZR

LM4040C25IDBZT

LM4040C25ILP

SOT-23-3 (DBZ)

4MU_

2.5 V

TO-92/TO-226 (LP)

SC-70 (DCK)

NFC25I

PB_

LM4040C25ILPR

LM4040C30IDCKR

LM4040C30IDBZR

LM4040C30IDBZT

LM4040C30ILP

SOT-23-3 (DBZ)

4M8_

3 V

TO-92/TO-226 (LP)

SC-70 (DCK)

PREVIEW

P6_

LM4040C30ILPR

LM4040C41IDCKR

LM4040C41IDBZR

LM4040C41IDBZT

LM4040C41ILP

C grade:

0.5% initial

accuracy

and

SOT-23-3 (DBZ)

4M4_

–40°C to 85°C

4.096 V

100 ppm/°C

temperature

coefficient

TO-92/TO-226 (LP)

SC-70 (DCK)

PREVIEW

MZ_

LM4040C41ILPR

LM4040C50IDCKR

LM4040C50IDBZR

LM4040C50IDBZT

LM4040C50ILP

SOT-23-3 (DBZ)

4NC_

5 V

TO-92/TO-226 (LP)

SC-70 (DCK)

PREVIEW

PF_

LM4040C50ILPR

LM4040C82IDCKR

LM4040C82IDBZR

LM4040C82IDBZT

LM4040C82ILP

SOT-23-3 (DBZ)

4NN_

8.192 V

TO-92/TO-226 (LP)

SC-70 (DCK)

PREVIEW

PK_

LM4040C82ILPR

LM4040C10IDCKR

LM4040C10IDBZR

LM4040C10IDBZT

LM4040C10ILP

SOT-23-3 (DBZ)

4NS_

10 V

TO-92/TO-226 (LP)

NFC10I

LM4040C10ILPR

Submit Documentation Feedback

LM4040

ORDERING INFORMATION (continued)

DEVICE

GRADE

ORDERABLE

PART NUMBER

TOP-SIDE

T_A

V_KA

PACKAGE⁽²⁾

MARKING⁽³⁾

SC-70 (DCK)

Reel of 3000

LM4040D20IDCKR

LM4040D20IDBZR

LM4040D20IDBZT

LM4040D20ILP

MW_

Reel of 3000

Reel of 250

Bulk of 1000

Reel of 2000

Reel of 3000

Reel of 250

Bulk of 1000

Reel of 2000

Reel of 3000

Reel of 250

Bulk of 1000

Reel of 2000

Reel of 3000

Reel of 250

Bulk of 1000

Reel of 2000

Reel of 3000

Reel of 250

Bulk of 1000

Reel of 2000

Reel of 3000

Reel of 250

Bulk of 1000

Reel of 2000

Reel of 3000

Reel of 250

Bulk of 1000

Reel of 2000

SOT-23-3 (DBZ)

4MV_

2.048 V

TO-92/TO-226 (LP)

SC-70 (DCK)

PREVIEW

ME_

LM4040D20ILPR

LM4040D25IDCKR

LM4040D25IDBZR

LM4040D25IDBZT

LM4040D25ILP

SOT-23-3 (DBZ)

4ME_

2.5 V

TO-92/TO-226 (LP)

SC-70 (DCK)

NFD25I

PC_

LM4040D25ILPR

LM4040D30IDCKR

LM4040D30IDBZR

LM4040D30IDBZT

LM4040D30ILP

SOT-23-3 (DBZ)

4M9_

3 V

TO-92/TO-226 (LP)

SC-70 (DCK)

PREVIEW

P7_

LM4040D30ILPR

LM4040D41IDCKR

LM4040D41IDBZR

LM4040D41IDBZT

LM4040D41ILP

D grade:

1.0% initial

accuracy

and

SOT-23-3 (DBZ)

4M5_

–40°C to 85°C

4.096 V

150 ppm/°C

temperature

coefficient

TO-92/TO-226 (LP)

SC-70 (DCK)

PREVIEW

M4_

LM4040D41ILPR

LM4040D50IDCKR

LM4040D50IDBZR

LM4040D50IDBZT

LM4040D50ILP

SOT-23-3 (DBZ)

4ND_

5 V

TO-92/TO-226 (LP)

SC-70 (DCK)

PREVIEW

PG_

LM4040D50ILPR

LM4040D82IDCKR

LM4040D82IDBZR

LM4040D82IDBZT

LM4040D82ILP

SOT-23-3 (DBZ)

4NP_

8.192 V

TO-92/TO-226 (LP)

SC-70 (DCK)

PREVIEW

PL_

LM4040D82ILPR

LM4040D10IDCKR

LM4040D10IDBZR

LM4040D10IDBZT

LM4040D10ILP

SOT-23-3 (DBZ)

4NT_

10 V

TO-92/TO-226 (LP)

NFD10I

LM4040D10ILPR

Submit Documentation Feedback

LM4040

ORDERING INFORMATION (continued)

DEVICE

GRADE

ORDERABLE

PART NUMBER

TOP-SIDE

T_A

V_KA

PACKAGE⁽²⁾

MARKING⁽³⁾

Reel of 3000

LM4040C20QDBZR

LM4040C20QDBZT

LM4040C25QDBZR

LM4040C25QDBZT

LM4040C30QDBZR

LM4040C30QDBZT

LM4040C50QDBZR

LM4040C50QDBZT

LM4040D20QDBZR

LM4040D20QDBZT

LM4040D25QDBZR

LM4040D25QDBZT

LM4040D30QDBZR

LM4040D30QDBZT

LM4040D50QDBZR

LM4040D50QDBZT

2.048 V

4MW_

Reel of 250

Reel of 3000

Reel of 250

Reel of 3000

Reel of 250

Reel of 3000

Reel of 250

Reel of 3000

Reel of 250

Reel of 3000

Reel of 250

Reel of 3000

Reel of 250

Reel of 3000

Reel of 250

C grade:

0.5% initial

accuracy

and

100 ppm/°C

temperature

coefficient

2.5 V

3 V

4MA_

4NJ_

4NE_

4MY_

4MB_

4NK_

4NF_

SOT-23-3 (DBZ)

5 V

–40°C to 125°C

2.048 V

2.5 V

3 V

D grade:

1.0% initial

accuracy

and

150 ppm/°C

temperature

coefficient

SOT-23-3 (DBZ)

5 V

Submit Documentation Feedback

LM4040

FUNCTIONAL BLOCK DIAGRAM

CATHODE

ANODE

Absolute Maximum Ratings⁽¹⁾

over free-air temperature range (unless otherwise noted)

MIN

MAX

UNIT

I_Z

Continuous cathode current

–10

DBZ package

DCK package

LP package

206

252

156

150

θ_JA

Package thermal impedance⁽²⁾⁽³⁾

°C/W

T_J

Operating virtual junction temperature

Storage temperature range

°C

T_stg

–65

(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings

only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating

conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

(2) Maximum power dissipation is a function of T_J(max), θ_JA, and T_A. The maximum allowable power dissipation at any allowable ambient

temperature is P_D= (T_J(max) – T_A)/θ_JA. Operating at the absolute maximum T_Jof 150°C can affect reliability.

(3) The package thermal impedance is calculated in accordance with JESD 51-7.

Recommended Operating Conditions

MIN

(1)

MAX

UNIT

I_Z

Cathode current

LM4040xxxI

LM4040xxxQ

–40

T_A

Free-air temperature

°C

125

(1) See parametric tables

Submit Documentation Feedback

LM4040

LM4040x20I Electrical Characteristics

at industrial temperature range, full-range T_A= –40°C to 85°C (unless otherwise noted)

LM4040A20I

LM4040B20I

PARAMETER

TEST CONDITIONS

I_Z= 100 μA

T_A

UNIT

MIN

TYP

MAX

MIN

TYP

MAX

V_Z

Reverse breakdown voltage

25°C

2.048

–2

–4.1

–17

4.1

Reverse breakdown voltage

tolerance

ΔV_Z

I_Z= 100 μA

Full range

25°C

–15

I_Z,min

Minimum cathode current

μA

Full range

25°C

I_Z= 10 mA

±20

±15

±20

±15

25°C

Average temperature coefficient

of reverse breakdown voltage

α_VZ

I_Z= 1 mA

ppm/°C

Full range

25°C

±100

I_Z= 100 μA

I_Z,min< I_Z< 1 mA

±15

0.3

±15

0.3

25°C

0.8

Reverse breakdown voltage

change with cathode current

change

DV_Z

DI_Z

Full range

25°C

2.5

1 mA < I_Z< 15 mA

Full range

I_Z= 1 mA, f = 120 Hz,

I_AC= 0.1 I_Z

Z_Z

e_N

Reverse dynamic impedance

Wideband noise

25°C

0.3

0.8

0.3

0.8

Ω

I_Z= 100 μA,

10 Hz ≤ f ≤ 10 kHz

μV_RMS

t = 1000 h,

T_A= 25°C ± 0.1°C,

I_Z= 100 μA

Long-term stability of reverse

breakdown voltage

120

ppm

V_HYSTThermal hysteresis⁽¹⁾

ΔT_A= –40°C to 125°C

0.08

(1) Thermal hysteresis is defined as V_Z,25°C(after cycling to –40°C) – V_Z,25°C(after cycling to 125°C).

Submit Documentation Feedback

LM4040

LM4040x20I Electrical Characteristics

at industrial temperature range, full-range T_A= –40°C to 85°C (unless otherwise noted)

LM4040C20I

LM4040D20I

PARAMETER

TEST CONDITIONS

I_Z= 100 μA

T_A

UNIT

MIN

TYP

MAX

MIN

TYP

MAX

V_Z

Reverse breakdown voltage

25°C

2.048

–10

–23

–20

–40

Reverse breakdown voltage

tolerance

ΔV_Z

I_Z= 100 μA

Full range

25°C

I_Z,min

Minimum cathode current

μA

Full range

25°C

I_Z= 10 mA

±20

±15

±20

±15

25°C

Average temperature coefficient

of reverse breakdown voltage

α_VZ

I_Z= 1 mA

ppm/°C

Full range

25°C

±100

±150

I_Z= 100 μA

I_Z,min< I_Z< 1 mA

±15

0.3

±15

0.3

25°C

0.8

1.2

Reverse breakdown voltage

change with cathode current

change

DV_Z

DI_Z

Full range

25°C

2.5

1 mA < I_Z< 15 mA

Full range

I_Z= 1 mA, f = 120 Hz,

I_AC= 0.1 I_Z

Z_Z

e_N

Reverse dynamic impedance

Wideband noise

25°C

0.3

0.9

0.3

1.1

Ω

I_Z= 100 μA,

10 Hz ≤ f ≤ 10 kHz

μV_RMS

t = 1000 h,

T_A= 25°C ± 0.1°C,

I_Z= 100 μA

Long-term stability of reverse

breakdown voltage

120

ppm

V_HYSTThermal hysteresis⁽¹⁾

ΔT_A= –40°C to 125°C

0.08

(1) Thermal hysteresis is defined as V_Z,25°C(after cycling to –40°C) – V_Z,25°C(after cycling to 125°C).

Submit Documentation Feedback

LM4040

LM4040x20Q Electrical Characteristics

at extended temperature range, full-range T_A= –40°C to 125°C (unless otherwise noted)

LM4040C20Q

LM4040D20Q

PARAMETER

TEST CONDITIONS

I_Z= 100 μA

T_A

UNIT

MIN

TYP

MAX

MIN

TYP

MAX

V_Z

Reverse breakdown voltage

25°C

2.048

–10

–30

–20

–50

Reverse breakdown voltage

tolerance

ΔV_Z

I_Z= 100 μA

Full range

25°C

I_Z,min

Minimum cathode current

μA

Full range

25°C

I_Z= 10 mA

±20

±15

±20

±15

25°C

Average temperature coefficient

of reverse breakdown voltage

α_VZ

I_Z= 1 mA

ppm/°C

Full range

25°C

±100

±150

I_Z= 100 μA

I_Z,min< I_Z< 1 mA

±15

0.3

±15

0.3

25°C

0.8

1.2

Reverse breakdown voltage

change with cathode current

change

DV_Z

DI_Z

Full range

25°C

2.5

1 mA < I_Z< 15 mA

Full range

I_Z= 1 mA, f = 120 Hz,

I_AC= 0.1 I_Z

Z_Z

e_N

Reverse dynamic impedance

Wideband noise

25°C

0.3

0.9

0.3

1.1

Ω

I_Z= 100 μA,

10 Hz ≤ f ≤ 10 kHz

μV_RMS

t = 1000 h,

T_A= 25°C ± 0.1°C,

I_Z= 100 μA

Long-term stability of reverse

breakdown voltage

120

ppm

V_HYSTThermal hysteresis⁽¹⁾

ΔT_A= –40°C to 125°C

0.08

(1) Thermal hysteresis is defined as V_Z,25°C(after cycling to –40°C) – V_Z,25°C(after cycling to 125°C).

Submit Documentation Feedback

LM4040

LM4040x25I Electrical Characteristics

at industrial temperature range, full-range T_A= –40°C to 85°C (unless otherwise noted)

LM4040A25I

LM4040B25I

PARAMETER

TEST CONDITIONS

I_Z= 100 μA

T_A

UNIT

MIN

TYP

MAX

MIN

TYP

MAX

V_Z

Reverse breakdown voltage

25°C

2.5

–2.5

–19

2.5

–5

Reverse breakdown voltage

tolerance

ΔV_Z

I_Z= 100 μA

Full range

25°C

–21

I_Z,min

Minimum cathode current

μA

Full range

25°C

I_Z= 10 mA

±20

±15

±20

±15

25°C

Average temperature coefficient

of reverse breakdown voltage

α_VZ

I_Z= 1 mA

ppm/°C

Full range

25°C

±100

I_Z= 100 μA

I_Z,min< I_Z< 1 mA

±15

0.3

±15

0.3

25°C

0.8

Reverse breakdown voltage

change with cathode current

change

DV_Z

DI_Z

Full range

25°C

2.5

1 mA < I_Z< 15 mA

Full range

I_Z= 1 mA, f = 120 Hz,

I_AC= 0.1 I_Z

Z_Z

e_N

Reverse dynamic impedance

Wideband noise

25°C

0.3

0.8

0.3

0.8

Ω

I_Z= 100 μA,

10 Hz ≤ f ≤ 10 kHz

μV_RMS

t = 1000 h,

T_A= 25°C ± 0.1°C,

I_Z= 100 μA

Long-term stability of reverse

breakdown voltage

120

ppm

V_HYSTThermal hysteresis⁽¹⁾

ΔT_A= –40°C to 125°C

0.08

(1) Thermal hysteresis is defined as V_Z,25°C(after cycling to –40°C) – V_Z,25°C(after cycling to 125°C).

Submit Documentation Feedback

LM4040

LM4040x25I Electrical Characteristics

at industrial temperature range, full-range T_A= –40°C to 85°C (unless otherwise noted)

LM4040C25I

LM4040D25I

PARAMETER

TEST CONDITIONS

I_Z= 100 μA

T_A

UNIT

MIN

TYP

MAX

MIN

TYP

MAX

V_Z

Reverse breakdown voltage

25°C

2.5

–12

–29

–25

–49

Reverse breakdown voltage

tolerance

ΔV_Z

I_Z= 100 μA

Full range

25°C

I_Z,min

Minimum cathode current

μA

Full range

25°C

I_Z= 10 mA

±20

±15

±20

±15

25°C

Average temperature coefficient

of reverse breakdown voltage

α_VZ

I_Z= 1 mA

ppm/°C

Full range

25°C

±100

±150

I_Z= 100 μA

I_Z,min< I_Z< 1 mA

±15

0.3

±15

0.3

25°C

0.8

1.2

Reverse breakdown voltage

change with cathode current

change

DV_Z

DI_Z

Full range

25°C

2.5

1 mA < I_Z< 15 mA

Full range

I_Z= 1 mA, f = 120 Hz,

I_AC= 0.1 I_Z

Z_Z

e_N

Reverse dynamic impedance

Wideband noise

25°C

0.3

0.9

0.3

1.1

Ω

I_Z= 100 μA,

10 Hz ≤ f ≤ 10 kHz

μV_RMS

t = 1000 h,

T_A= 25°C ± 0.1°C,

I_Z= 100 μA

Long-term stability of reverse

breakdown voltage

120

ppm

V_HYSTThermal hysteresis⁽¹⁾

ΔT_A= –40°C to 125°C

0.08

(1) Thermal hysteresis is defined as V_Z,25°C(after cycling to –40°C) – V_Z,25°C(after cycling to 125°C).

Submit Documentation Feedback

LM4040

LM4040x25Q Electrical Characteristics

at extended temperature range, full-range T_A= –40°C to 125°C (unless otherwise noted)

LM4040C25Q

LM4040D25Q

PARAMETER

TEST CONDITIONS

I_Z= 100 μA

T_A

UNIT

MIN

TYP

MAX

MIN

TYP

MAX

V_Z

Reverse breakdown voltage

25°C

2.5

–12

–38

–25

–63

Reverse breakdown voltage

tolerance

ΔV_Z

I_Z= 100 μA

Full range

25°C

I_Z,min

Minimum cathode current

μA

Full range

25°C

I_Z= 10 mA

±20

±15

±20

±15

25°C

Average temperature coefficient

of reverse breakdown voltage

α_VZ

I_Z= 1 mA

ppm/°C

Full range

25°C

±100

±150

I_Z= 100 μA

I_Z,min< I_Z< 1 mA

±15

0.3

±15

0.3

25°C

0.8

1.2

Reverse breakdown voltage

change with cathode current

change

DV_Z

DI_Z

Full range

25°C

2.5

1 mA < I_Z< 15 mA

Full range

I_Z= 1 mA, f = 120 Hz,

I_AC= 0.1 I_Z

Z_Z

e_N

Reverse dynamic impedance

Wideband noise

25°C

0.3

0.9

0.3

1.1

Ω

I_Z= 100 μA,

10 Hz ≤ f ≤ 10 kHz

μV_RMS

t = 1000 h,

T_A= 25°C ± 0.1°C,

I_Z= 100 μA

Long-term stability of reverse

breakdown voltage

120

ppm

V_HYSTThermal hysteresis⁽¹⁾

ΔT_A= –40°C to 125°C

0.08

(1) Thermal hysteresis is defined as V_Z,25°C(after cycling to –40°C) – V_Z,25°C(after cycling to 125°C).

Submit Documentation Feedback

LM4040

LM4040x30I Electrical Characteristics

at industrial temperature range, full-range T_A= –40°C to 85°C (unless otherwise noted)

LM4040A30I

LM4040B30I

PARAMETER

TEST CONDITIONS

I_Z= 100 μA

T_A

UNIT

MIN

TYP

MAX

MIN

TYP

MAX

V_Z

Reverse breakdown voltage

25°C

–3

–6

Reverse breakdown voltage

tolerance

ΔV_Z

I_Z= 100 μA

Full range

25°C

–22

–26

I_Z,min

Minimum cathode current

μA

Full range

25°C

I_Z= 10 mA

±20

±15

±20

±15

25°C

Average temperature coefficient

of reverse breakdown voltage

α_VZ

I_Z= 1 mA

ppm/°C

Full range

25°C

±100

I_Z= 100 μA

I_Z,min< I_Z< 1 mA

±15

0.6

±15

0.6

25°C

0.8

1.1

0.8

1.1

Reverse breakdown voltage

change with cathode current

change

DV_Z

DI_Z

Full range

25°C

2.7

1 mA < I_Z< 15 mA

Full range

I_Z= 1 mA, f = 120 Hz,

I_AC= 0.1 I_Z

Z_Z

e_N

Reverse dynamic impedance

Wideband noise

25°C

0.4

0.9

0.4

0.9

Ω

I_Z= 100 μA,

10 Hz ≤ f ≤ 10 kHz

μV_RMS

t = 1000 h,

T_A= 25°C ± 0.1°C,

I_Z= 100 μA

Long-term stability of reverse

breakdown voltage

120

ppm

V_HYSTThermal hysteresis⁽¹⁾

ΔT_A= –40°C to 125°C

0.08

(1) Thermal hysteresis is defined as V_Z,25°C(after cycling to –40°C) – V_Z,25°C(after cycling to 125°C).

Submit Documentation Feedback

LM4040

LM4040x30I Electrical Characteristics

at industrial temperature range, full-range T_A= –40°C to 85°C (unless otherwise noted)

LM4040C30I

LM4040D30I

PARAMETER

TEST CONDITIONS

I_Z= 100 μA

T_A

UNIT

MIN

TYP

MAX

MIN

TYP

MAX

V_Z

Reverse breakdown voltage

25°C

–15

–34

–30

–59

Reverse breakdown voltage

tolerance

ΔV_Z

I_Z= 100 μA

Full range

25°C

I_Z,min

Minimum cathode current

μA

Full range

25°C

I_Z= 10 mA

±20

±15

±20

±15

25°C

Average temperature coefficient

of reverse breakdown voltage

α_VZ

I_Z= 1 mA

ppm/°C

Full range

25°C

±100

±150

I_Z= 100 μA

I_Z,min< I_Z< 1 mA

±15

0.4

±15

1.4

25°C

0.8

1.1

1.3

Reverse breakdown voltage

change with cathode current

change

DV_Z

DI_Z

Full range

25°C

2.7

1 mA < I_Z< 15 mA

Full range

I_Z= 1 mA, f = 120 Hz,

I_AC= 0.1 I_Z

Z_Z

e_N

Reverse dynamic impedance

Wideband noise

25°C

0.4

0.9

0.4

1.2

Ω

I_Z= 100 μA,

10 Hz ≤ f ≤ 10 kHz

μV_RMS

t = 1000 h,

T_A= 25°C ± 0.1°C,

I_Z= 100 μA

Long-term stability of reverse

breakdown voltage

120

ppm

V_HYSTThermal hysteresis⁽¹⁾

ΔT_A= –40°C to 125°C

0.08

(1) Thermal hysteresis is defined as V_Z,25°C(after cycling to –40°C) – V_Z,25°C(after cycling to 125°C).

Submit Documentation Feedback

LM4040

LM4040x30Q Electrical Characteristics

at extended temperature range, full-range T_A= –40°C to 125°C (unless otherwise noted)

LM4040C30Q

LM4040D30Q

PARAMETER

TEST CONDITIONS

I_Z= 100 μA

T_A

UNIT

MIN

TYP

MAX

MIN

TYP

MAX

V_Z

Reverse breakdown voltage

25°C

–15

–45

–30

–75

Reverse breakdown voltage

tolerance

ΔV_Z

I_Z= 100 μA

Full range

25°C

I_Z,min

Minimum cathode current

μA

Full range

25°C

I_Z= 10 mA

±20

±15

±20

±15

25°C

Average temperature coefficient

of reverse breakdown voltage

α_VZ

I_Z= 1 mA

ppm/°C

Full range

25°C

±100

±150

I_Z= 100 μA

I_Z,min< I_Z< 1 mA

±15

0.4

±15

0.4

25°C

0.8

1.1

1.3

Reverse breakdown voltage

change with cathode current

change

DV_Z

DI_Z

Full range

25°C

2.7

1 mA < I_Z< 15 mA

Full range

I_Z= 1 mA, f = 120 Hz,

I_AC= 0.1 I_Z

Z_Z

e_N

Reverse dynamic impedance

Wideband noise

25°C

0.4

0.9

0.4

1.2

Ω

I_Z= 100 μA,

10 Hz ≤ f ≤ 10 kHz

μV_RMS

t = 1000 h,

T_A= 25°C ± 0.1°C,

I_Z= 100 μA

Long-term stability of reverse

breakdown voltage

120

ppm

V_HYSTThermal hysteresis⁽¹⁾

ΔT_A= –40°C to 125°C

0.08

(1) Thermal hysteresis is defined as V_Z,25°C(after cycling to –40°C) – V_Z,25°C(after cycling to 125°C).

Submit Documentation Feedback

LM4040

LM4040x41I Electrical Characteristics

at industrial temperature range, full-range T_A= –40°C to 85°C (unless otherwise noted)

LM4040A41I

LM4040B41I

PARAMETER

TEST CONDITIONS

I_Z= 100 μA

T_A

UNIT

MIN

TYP

MAX

MIN

TYP

MAX

V_Z

Reverse breakdown voltage

25°C

4.096

–4.1

–31

4.1

–8.2

–35

8.2

Reverse breakdown voltage

tolerance

ΔV_Z

I_Z= 100 μA

Full range

25°C

I_Z,min

Minimum cathode current

μA

Full range

25°C

I_Z= 10 mA

±30

±20

±30

±20

25°C

Average temperature coefficient

of reverse breakdown voltage

α_VZ

I_Z= 1 mA

ppm/°C

Full range

25°C

±100

I_Z= 100 μA

I_Z,min< I_Z< 1 mA

±20

0.5

±20

0.5

25°C

0.9

1.2

0.9

1.2

Reverse breakdown voltage

change with cathode current

change

DV_Z

DI_Z

Full range

25°C

1 mA < I_Z< 15 mA

Full range

I_Z= 1 mA, f = 120 Hz,

I_AC= 0.1 I_Z

Z_Z

e_N

Reverse dynamic impedance

Wideband noise

25°C

0.5

Ω

I_Z= 100 μA,

10 Hz ≤ f ≤ 10 kHz

μV_RMS

t = 1000 h,

T_A= 25°C ± 0.1°C,

I_Z= 100 μA

Long-term stability of reverse

breakdown voltage

120

ppm

V_HYSTThermal hysteresis⁽¹⁾

ΔT_A= –40°C to 125°C

0.08

(1) Thermal hysteresis is defined as V_Z,25°C(after cycling to –40°C) – V_Z,25°C(after cycling to 125°C).

Submit Documentation Feedback

LM4040

LM4040x41I Electrical Characteristics

at industrial temperature range, full-range T_A= –40°C to 85°C (unless otherwise noted)

LM4040C41I

LM4040D41I

PARAMETER

TEST CONDITIONS

I_Z= 100 μA

T_A

UNIT

MIN

TYP

MAX

MIN

TYP

MAX

V_Z

Reverse breakdown voltage

25°C

4.096

–20

–47

–41

–81

Reverse breakdown voltage

tolerance

ΔV_Z

I_Z= 100 μA

Full range

25°C

I_Z,min

Minimum cathode current

μA

Full range

25°C

I_Z= 10 mA

±30

±20

±30

±20

25°C

Average temperature coefficient

of reverse breakdown voltage

α_VZ

I_Z= 1 mA

ppm/°C

Full range

25°C

±100

±150

I_Z= 100 μA

I_Z,min< I_Z< 1 mA

±20

0.5

±20

0.5

25°C

0.9

1.2

1.5

Reverse breakdown voltage

change with cathode current

change

DV_Z

DI_Z

Full range

25°C

1 mA < I_Z< 15 mA

Full range

I_Z= 1 mA, f = 120 Hz,

I_AC= 0.1 I_Z

Z_Z

e_N

Reverse dynamic impedance

Wideband noise

25°C

0.5

1.3

Ω

I_Z= 100 μA,

10 Hz ≤ f ≤ 10 kHz

μV_RMS

t = 1000 h,

T_A= 25°C ± 0.1°C,

I_Z= 100 μA

Long-term stability of reverse

breakdown voltage

120

ppm

V_HYSTThermal hysteresis⁽¹⁾

ΔT_A= –40°C to 125°C

0.08

(1) Thermal hysteresis is defined as V_Z,25°C(after cycling to –40°C) – V_Z,25°C(after cycling to 125°C).

Submit Documentation Feedback

LM4040

LM4040x50I Electrical Characteristics

at industrial temperature range, full-range T_A= –40°C to 85°C (unless otherwise noted)

LM4040A50I

LM4040B50I

PARAMETER

TEST CONDITIONS

I_Z= 100 μA

T_A

UNIT

MIN

TYP

MAX

MIN

TYP

MAX

V_Z

Reverse breakdown voltage

25°C

–5

–10

–43

Reverse breakdown voltage

tolerance

ΔV_Z

I_Z= 100 μA

Full range

25°C

–38

I_Z,min

Minimum cathode current

μA

Full range

25°C

I_Z= 10 mA

±30

±20

±30

±20

25°C

Average temperature coefficient

of reverse breakdown voltage

α_VZ

I_Z= 1 mA

ppm/°C

Full range

25°C

±100

I_Z= 100 μA

I_Z,min< I_Z< 1 mA

±20

0.5

±20

0.5

25°C

1.4

Reverse breakdown voltage

change with cathode current

change

DV_Z

DI_Z

Full range

25°C

3.5

1 mA < I_Z< 15 mA

Full range

I_Z= 1 mA, f = 120 Hz,

I_AC= 0.1 I_Z

Z_Z

e_N

Reverse dynamic impedance

Wideband noise

25°C

0.5

1.1

0.5

1.1

Ω

I_Z= 100 μA,

10 Hz ≤ f ≤ 10 kHz

μV_RMS

t = 1000 h,

T_A= 25°C ± 0.1°C,

I_Z= 100 μA

Long-term stability of reverse

breakdown voltage

120

ppm

V_HYSTThermal hysteresis⁽¹⁾

ΔT_A= –40°C to 125°C

0.08

(1) Thermal hysteresis is defined as V_Z,25°C(after cycling to –40°C) – V_Z,25°C(after cycling to 125°C).

Submit Documentation Feedback

LM4040

LM4040x50I Electrical Characteristics

at industrial temperature range, full-range T_A= –40°C to 85°C (unless otherwise noted)

LM4040C50I

LM4040D50I

PARAMETER

TEST CONDITIONS

I_Z= 100 μA

T_A

UNIT

MIN

TYP

MAX

MIN

TYP

MAX

V_Z

Reverse breakdown voltage

25°C

–25

–58

–50

–99

Reverse breakdown voltage

tolerance

ΔV_Z

I_Z= 100 μA

Full range

25°C

I_Z,min

Minimum cathode current

μA

Full range

25°C

I_Z= 10 mA

±30

±20

±30

±20

25°C

Average temperature coefficient

of reverse breakdown voltage

α_VZ

I_Z= 1 mA

ppm/°C

Full range

25°C

±100

±150

I_Z= 100 μA

I_Z,min< I_Z< 1 mA

±20

0.5

±20

0.5

25°C

1.4

1.3

1.8

Reverse breakdown voltage

change with cathode current

change

DV_Z

DI_Z

Full range

25°C

3.5

1 mA < I_Z< 15 mA

Full range

I_Z= 1 mA, f = 120 Hz,

I_AC= 0.1 I_Z

Z_Z

e_N

Reverse dynamic impedance

Wideband noise

25°C

0.5

1.1

0.5

1.5

Ω

I_Z= 100 μA,

10 Hz ≤ f ≤ 10 kHz

μV_RMS

t = 1000 h,

T_A= 25°C ± 0.1°C,

I_Z= 100 μA

Long-term stability of reverse

breakdown voltage

120

ppm

V_HYSTThermal hysteresis⁽¹⁾

ΔT_A= –40°C to 125°C

0.08

(1) Thermal hysteresis is defined as V_Z,25°C(after cycling to –40°C) – V_Z,25°C(after cycling to 125°C).

Submit Documentation Feedback

LM4040

LM4040x50Q Electrical Characteristics

at extended temperature range, full-range T_A= –40°C to 125°C (unless otherwise noted)

LM4040C50Q

LM4040D50Q

PARAMETER

TEST CONDITIONS

I_Z= 100 μA

T_A

UNIT

MIN

TYP

MAX

MIN

TYP

MAX

V_Z

Reverse breakdown voltage

25°C

–25

–75

–50

125

Reverse breakdown voltage

tolerance

ΔV_Z

I_Z= 100 μA

Full range

25°C

–125

I_Z,min

Minimum cathode current

μA

Full range

25°C

I_Z= 10 mA

±30

±20

±30

±20

25°C

Average temperature coefficient

of reverse breakdown voltage

α_VZ

I_Z= 1 mA

ppm/°C

Full range

25°C

±100

±150

I_Z= 100 μA

I_Z,min< I_Z< 1 mA

±20

0.5

±20

0.5

25°C

1.4

1.8

Reverse breakdown voltage

change with cathode current

change

DV_Z

DI_Z

Full range

25°C

3.5

1 mA < I_Z< 15 mA

Full range

I_Z= 1 mA, f = 120 Hz,

I_AC= 0.1 I_Z

Z_Z

e_N

Reverse dynamic impedance

Wideband noise

25°C

0.5

1.1

0.5

1.1

Ω

I_Z= 100 μA,

10 Hz ≤ f ≤ 10 kHz

μV_RMS

t = 1000 h,

T_A= 25°C ± 0.1°C,

I_Z= 100 μA

Long-term stability of reverse

breakdown voltage

120

ppm

V_HYSTThermal hysteresis⁽¹⁾

ΔT_A= –40°C to 125°C

0.08

(1) Thermal hysteresis is defined as V_Z,25°C(after cycling to –40°C) – V_Z,25°C(after cycling to 125°C).

Submit Documentation Feedback

LM4040

LM4040x82I Electrical Characteristics

at industrial temperature range, full-range T_A= –40°C to 85°C (unless otherwise noted)

LM4040A82I

LM4040B82I

PARAMETER

TEST CONDITIONS

I_Z= 150 μA

T_A

UNIT

MIN

TYP

MAX

MIN

TYP

MAX

V_Z

Reverse breakdown voltage

25°C

8.192

–8.2

–61

8.2

–16

–70

Reverse breakdown voltage

tolerance

ΔV_Z

I_Z= 150 μA

Full range

25°C

106

110

106

110

I_Z,min

Minimum cathode current

μA

Full range

25°C

I_Z= 10 mA

±40

±20

±40

±20

25°C

Average temperature coefficient

of reverse breakdown voltage

α_VZ

I_Z= 1 mA

ppm/°C

Full range

25°C

±100

I_Z= 150 μA

I_Z,min< I_Z< 1 mA

±20

0.6

±20

0.6

25°C

1.3

2.5

1.6

2.5

Reverse breakdown voltage

change with cathode current

change

DV_Z

DI_Z

Full range

25°C

1 mA < I_Z< 15 mA

Full range

I_Z= 1 mA, f = 120 Hz,

I_AC= 0.1 I_Z

Z_Z

e_N

Reverse dynamic impedance

Wideband noise

25°C

0.6

1.5

0.6

1.5

Ω

I_Z= 150 μA,

10 Hz ≤ f ≤ 10 kHz

130

μV_RMS

t = 1000 h,

T_A= 25°C ± 0.1°C,

I_Z= 150 μA

Long-term stability of reverse

breakdown voltage

120

ppm

V_HYSTThermal hysteresis⁽¹⁾

ΔT_A= –40°C to 125°C

0.08

(1) Thermal hysteresis is defined as V_Z,25°C(after cycling to –40°C) – V_Z,25°C(after cycling to 125°C).

Submit Documentation Feedback

LM4040

LM4040x82I Electrical Characteristics

at industrial temperature range, full-range T_A= –40°C to 85°C (unless otherwise noted)

LM4040C82I

LM4040D82I

PARAMETER

TEST CONDITIONS

I_Z= 150 μA

T_A

UNIT

MIN

TYP

MAX

MIN

TYP

MAX

V_Z

Reverse breakdown voltage

25°C

8.192

–41

–94

–82

162

111

115

Reverse breakdown voltage

tolerance

ΔV_Z

I_Z= 150 μA

Full range

25°C

–162

106

110

I_Z,min

Minimum cathode current

μA

Full range

25°C

I_Z= 10 mA

±40

±20

±40

±20

25°C

Average temperature coefficient

of reverse breakdown voltage

α_VZ

I_Z= 1 mA

ppm/°C

Full range

25°C

±100

±150

I_Z= 150 μA

I_Z,min< I_Z< 1 mA

±20

0.6

±20

0.6

25°C

1.3

2.5

1.7

Reverse breakdown voltage

change with cathode current

change

DV_Z

DI_Z

Full range

25°C

1 mA < I_Z< 15 mA

Full range

I_Z= 1 mA, f = 120 Hz,

I_AC= 0.1 I_Z

Z_Z

e_N

Reverse dynamic impedance

Wideband noise

25°C

0.6

1.5

0.6

1.9

Ω

I_Z= 150 μA,

10 Hz ≤ f ≤ 10 kHz

130

μV_RMS

t = 1000 h,

T_A= 25°C ± 0.1°C,

I_Z= 150 μA

Long-term stability of reverse

breakdown voltage

120

ppm

V_HYSTThermal hysteresis⁽¹⁾

ΔT_A= –40°C to 125°C

0.08

(1) Thermal hysteresis is defined as V_Z,25°C(after cycling to –40°C) – V_Z,25°C(after cycling to 125°C).

Submit Documentation Feedback

LM4040

LM4040x10I Electrical Characteristics

at industrial temperature range, full-range T_A= –40°C to 85°C (unless otherwise noted)

LM4040A10I

LM4040B10I

PARAMETER

TEST CONDITIONS

I_Z= 150 μA

T_A

UNIT

MIN

TYP

MAX

MIN

TYP

MAX

V_Z

Reverse breakdown voltage

25°C

–10

–75

–20

–85

Reverse breakdown voltage

tolerance

ΔV_Z

I_Z= 150 μA

Full range

25°C

120

125

120

125

I_Z,min

Minimum cathode current

μA

Full range

25°C

I_Z= 10 mA

±40

±20

±40

±20

25°C

Average temperature coefficient

of reverse breakdown voltage

α_VZ

I_Z= 1 mA

ppm/°C

Full range

25°C

±100

I_Z= 150 μA

I_Z,min< I_Z< 1 mA

±20

0.8

±20

0.8

25°C

1.5

3.5

1.5

3.5

Reverse breakdown voltage

change with cathode current

change

DV_Z

DI_Z

Full range

25°C

1 mA < I_Z< 15 mA

Full range

I_Z= 1 mA, f = 120 Hz,

I_AC= 0.1 I_Z

Z_Z

e_N

Reverse dynamic impedance

Wideband noise

25°C

0.7

1.7

0.7

1.7

Ω

I_Z= 150 μA,

10 Hz ≤ f ≤ 10 kHz

180

μV_RMS

t = 1000 h,

T_A= 25°C ± 0.1°C,

I_Z= 150 μA

Long-term stability of reverse

breakdown voltage

120

ppm

V_HYSTThermal hysteresis⁽¹⁾

ΔT_A= –40°C to 125°C

0.08

(1) Thermal hysteresis is defined as V_Z,25°C(after cycling to –40°C) – V_Z,25°C(after cycling to 125°C).

Submit Documentation Feedback

LM4040

LM4040x10I Electrical Characteristics

at industrial temperature range, full-range T_A= –40°C to 85°C (unless otherwise noted)

LM4040C10I

LM4040D10I

PARAMETER

TEST CONDITIONS

I_Z= 150 μA

T_A

UNIT

MIN

TYP

MAX

MIN

TYP

MAX

V_Z

Reverse breakdown voltage

25°C

–50

115

120

125

–100

–198

100

198

130

135

Reverse breakdown voltage

tolerance

ΔV_Z

I_Z= 150 μA

Full range

25°C

–115

I_Z,min

Minimum cathode current

μA

Full range

25°C

I_Z= 10 mA

±40

±20

±40

±20

25°C

Average temperature coefficient

of reverse breakdown voltage

α_VZ

I_Z= 1 mA

ppm/°C

Full range

25°C

±100

±150

I_Z= 150 μA

I_Z,min< I_Z< 1 mA

±20

0.8

±20

0.8

25°C

1.5

3.5

Reverse breakdown voltage

change with cathode current

change

DV_Z

DI_Z

Full range

25°C

1 mA < I_Z< 15 mA

Full range

I_Z= 1 mA, f = 120 Hz,

I_AC= 0.1 I_Z

Z_Z

e_N

Reverse dynamic impedance

Wideband noise

25°C

0.7

1.7

0.7

2.3

Ω

I_Z= 150 μA,

10 Hz ≤ f ≤ 10 kHz

180

μV_RMS

t = 1000 h,

T_A= 25°C ± 0.1°C,

I_Z= 150 μA

Long-term stability of reverse

breakdown voltage

120

ppm

V_HYSTThermal hysteresis⁽¹⁾

ΔT_A= –40°C to 125°C

0.08

(1) Thermal hysteresis is defined as V_Z,25°C(after cycling to –40°C) – V_Z,25°C(after cycling to 125°C).

Submit Documentation Feedback

LM4040

TYPICAL CHARACTERISTICS

1000

100

0.6

0.5

0.4

0.3

V = 2.5 V

I = 150 µA

50 ppm/°C

20 ppm/°C

7 ppm/°C

No Capacitor

0.2

0.1

1 µF

Tantanlum

Capacitor

−0.1

−0.2

−0.3

−0.4

V = 2.5 V

I = 150 µA

T = 25°C

= 0.1 I

Z,AC

0.1

−40 −20

80 100 120

100

10k

100k

Temperature (_C)

Frequency (Hz)

Figure 1. Temperature Drift for Different Average

Temperature Coefficients

Figure 2. Output Impedance vs Frequency

1000

100

120

100

V = 2.5 V

T = 25°C

No Capacitor

V = 2.5 V

1-µF

Tantanlum

Capacitor

I = 1 mA

T = 25°C

= 0.1 I

Z,AC

0.1

0.0

1.0

1.5

2.0

3.0

0.5

2.5

100

10k

100k

Frequency (Hz)

V , Reverse Voltage (V)

Figure 3. Output Impedance vs Frequency

Figure 4. Temperature Drift for Different Average

Temperature Coefficient

V = 2.5 V

I = 200 µA

V = 2.5 V

T = 25°C

= 30 kΩ

−2

−4

−6

−8

−10

−1

−10

−12

0.1

10 20 30 40 50 60 70 80 90

100

10k

100k

Frequency (Hz)

Response Time (µs)

Figure 5. Noise Voltage vs Frequency

Figure 6. Start-Up Characteristics

Submit Documentation Feedback

LM4040

APPLICATION INFORMATION

Start-Up Characteristics

LM4040

1-Hz Rate

Figure 7. Test Circuit

Output Capacitor

The LM4040 does not require an output capacitor across cathode and anode for stability. However, if an output

bypass capacitor is desired, the LM4040 is designed to be stable with all capacitive loads.

SOT-23 Connections

There is a parasitic Schottky diode connected between pins 2 and 3 of the SOT-23 packaged device. Thus, pin 3

of the SOT-23 package must be left floating or connected to pin 2.

Use With ADCs or DACs

The LM4040x-41 is designed to be a cost-effective voltage reference as required in 12-bit data-acquisition

systems. For 12-bit systems operating from 5-V supplies such as the ADS7842 (see Figure 8), the LM4040x-41

(4.096 V) permits operation with an LSB of 1 mV.

ADS7842

0 V to V

REF

1 AIN0

2 AIN1

3 AIN2

4 AIN3

5-V Analog Supply

ANA

5 V

0.1 µF

10 µF

DIG

A1 26

A0 25

909

3.2-MHz Clock

BUSY Output

Write Input

CLK 24

REF

2.2 µF

AGND

DB11

DB10

BUSY

LM4040A-41

DB9

RD 20

DB0 19

DB1 18

Read Input

10 DB8

11 DB7

12 DB6

13 DB5

14 DGND

DB2 17

DB3 16

DB4 15

Figure 8. Data-Acquisition Circuit With LM4040x-41

Submit Documentation Feedback

LM4040

Cathode and Load Currents

In a typical shunt-regulator configuration (see Figure 9), an external resistor, R_S, is connected between the

supply and the cathode of the LM4040. R_Smust be set properly, as it sets the total current available to supply

the load (I_L) and bias the LM4040 (I_Z). In all cases, I_Zmust stay within a specified range for proper operation of

the reference. Taking into consideration one extreme in the variation of the load and supply voltage (maximum I_L

and minimum V_S), R_Smust be small enough to supply the minimum I_Zrequired for operation of the regulator, as

given by data-sheet parameters. At the other extreme, maximum V_Sand minimum I_L, R_Smust be large enough

to limit I_Zto less than its maximum-rated value of 15 mA.

R_Sis calculated according to Equation 1:

V_S* V_Z

R_S+

(

)

I_L) I_Z

(1)

I + I

Z L

LM4040

Figure 9. Shunt Regulator

Submit Documentation Feedback

PACKAGE OPTION ADDENDUM

www.ti.com

10-Jun-2014

PACKAGING INFORMATION

Orderable Device

LM4040A10IDBZR

LM4040A10IDBZRG4

LM4040A10IDBZT

LM4040A10IDCKR

Status Package Type Package Pins Package

Eco Plan

Lead/Ball Finish

MSL Peak Temp

Op Temp (°C)

-40 to 85

Device Marking

Samples

Drawing

Qty

(1)

(2)

(6)

(3)

(4/5)

ACTIVE

SOT-23

SC70

DBZ

3000

Green (RoHS

& no Sb/Br)

CU NIPDAU

Level-1-260C-UNLIM

4NQU

PHU

ACTIVE

DBZ

DCK

3000

250

Green (RoHS

& no Sb/Br)

-40 to 85

Green (RoHS

& no Sb/Br)

-40 to 85

3000

Green (RoHS

& no Sb/Br)

-40 to 85

LM4040A10ILP

LM4040A10ILPR

LM4040A20IDBZR

PREVIEW

ACTIVE

TO-92

1000

2000

3000

TBD

Call TI

-40 to 85

SOT-23

DBZ

Green (RoHS

& no Sb/Br)

CU NIPDAU

Level-1-260C-UNLIM

4MCU

LM4040A20IDBZRG4

LM4040A20IDBZT

LM4040A20IDBZTG4

LM4040A20IDCKR

LM4040A20IDCKRE4

LM4040A25IDBZR

LM4040A25IDBZT

LM4040A25IDBZTG4

LM4040A25IDCKR

ACTIVE

SOT-23

SC70

DBZ

DCK

DBZ

DCK

3000

250

Green (RoHS

& no Sb/Br)

CU NIPDAU

Level-1-260C-UNLIM

-40 to 85

4MCU

Green (RoHS

& no Sb/Br)

4MCU

250

Green (RoHS

& no Sb/Br)

4MCU

3000

250

Green (RoHS

& no Sb/Br)

MSU

SC70

Green (RoHS

& no Sb/Br)

MSU

SOT-23

SC70

Green (RoHS

& no Sb/Br)

(4NG3 ~ 4NGU)

P2U

Green (RoHS

& no Sb/Br)

250

Green (RoHS

& no Sb/Br)

3000

Green (RoHS

& no Sb/Br)

LM4040A25ILP

LM4040A25ILPR

LM4040A30IDBZR

PREVIEW

ACTIVE

TO-92

1000

2000

3000

TBD

Call TI

-40 to 85

SOT-23

DBZ

Green (RoHS

& no Sb/Br)

CU NIPDAU

Level-1-260C-UNLIM

4M6U

Addendum-Page 1

PACKAGE OPTION ADDENDUM

www.ti.com

10-Jun-2014

Orderable Device

Status Package Type Package Pins Package

Eco Plan

Lead/Ball Finish

MSL Peak Temp

Op Temp (°C)

-40 to 85

Device Marking

Samples

Drawing

Qty

(1)

(2)

(6)

(3)

(4/5)

LM4040A30IDBZRG4

LM4040A30IDBZT

ACTIVE

SOT-23

SC70

DBZ

3000

Green (RoHS

& no Sb/Br)

CU NIPDAU

Level-1-260C-UNLIM

4M6U

P9U

ACTIVE

DBZ

DCK

250

Green (RoHS

& no Sb/Br)

-40 to 85

LM4040A30IDBZTG4

LM4040A30IDCKR

LM4040A30IDCKRE4

Green (RoHS

& no Sb/Br)

-40 to 85

3000

Green (RoHS

& no Sb/Br)

-40 to 85

SC70

Green (RoHS

& no Sb/Br)

-40 to 85

P9U

LM4040A30IDCKT

LM4040A30ILP

PREVIEW

ACTIVE

SC70

TO-92

SOT-23

DCK

250

TBD

Call TI

-40 to 85

1000

2000

3000

LM4040A30ILPM

LM4040A30ILPR

LM4040A41IDBZR

Call TI

DBZ

Green (RoHS

& no Sb/Br)

CU NIPDAU

Level-1-260C-UNLIM

4M2U

P4U

LM4040A41IDBZRG4

LM4040A41IDBZT

LM4040A41IDBZTG4

LM4040A41IDCKR

ACTIVE

SOT-23

SC70

DBZ

DCK

3000

250

Green (RoHS

& no Sb/Br)

CU NIPDAU

Level-1-260C-UNLIM

-40 to 85

Green (RoHS

& no Sb/Br)

250

Green (RoHS

& no Sb/Br)

3000

Green (RoHS

& no Sb/Br)

LM4040A41ILP

LM4040A41ILPR

LM4040A50IDBZR

PREVIEW

ACTIVE

TO-92

1000

2000

3000

TBD

Call TI

-40 to 85

SOT-23

DBZ

Green (RoHS

& no Sb/Br)

CU NIPDAU

Level-1-260C-UNLIM

(4NA3 ~ 4NAU)

N5U

LM4040A50IDBZT

LM4040A50IDBZTG4

LM4040A50IDCKR

ACTIVE

SOT-23

SC70

DBZ

DCK

250

Green (RoHS

& no Sb/Br)

CU NIPDAU

Level-1-260C-UNLIM

-40 to 85

Green (RoHS

& no Sb/Br)

3000

Green (RoHS

& no Sb/Br)

Addendum-Page 2

PACKAGE OPTION ADDENDUM

www.ti.com

10-Jun-2014

Orderable Device

Status Package Type Package Pins Package

Eco Plan

Lead/Ball Finish

MSL Peak Temp

Op Temp (°C)

Device Marking

Samples

Drawing

Qty

(1)

(2)

(6)

(3)

(4/5)

LM4040A50IDCKRG4

ACTIVE

SC70

DCK

3000

Green (RoHS

& no Sb/Br)

CU NIPDAU

Level-1-260C-UNLIM

-40 to 85

N5U

LM4040A50ILP

PREVIEW

ACTIVE

TO-92

1000

3000

TBD

Call TI

-40 to 85

LM4040A82IDBZR

SOT-23

DBZ

Green (RoHS

& no Sb/Br)

CU NIPDAU

Level-1-260C-UNLIM

4NLU

PDU

LM4040A82IDBZT

LM4040A82IDBZTG4

LM4040A82IDCKR

LM4040B10IDBZR

LM4040B10IDBZT

LM4040B10IDBZTG4

LM4040B10IDCKR

ACTIVE

SOT-23

SC70

DBZ

DCK

DBZ

DCK

250

Green (RoHS

& no Sb/Br)

CU NIPDAU

Level-1-260C-UNLIM

-40 to 85

Green (RoHS

& no Sb/Br)

3000

250

Green (RoHS

& no Sb/Br)

SOT-23

SC70

Green (RoHS

& no Sb/Br)

4NRU

PJU

Green (RoHS

& no Sb/Br)

250

Green (RoHS

& no Sb/Br)

3000

Green (RoHS

& no Sb/Br)

LM4040B10ILP

LM4040B10ILPR

LM4040B20IDBZR

PREVIEW

ACTIVE

TO-92

1000

2000

3000

TBD

Call TI

-40 to 85

SOT-23

DBZ

Green (RoHS

& no Sb/Br)

CU NIPDAU

Level-1-260C-UNLIM

4MDU

LM4040B20IDBZRG4

LM4040B20IDBZT

LM4040B20IDBZTG4

LM4040B20IDCKR

LM4040B25IDBZR

LM4040B25IDBZRG4

ACTIVE

SOT-23

SC70

DBZ

DCK

DBZ

3000

250

Green (RoHS

& no Sb/Br)

CU NIPDAU

Level-1-260C-UNLIM

-40 to 85

4MDU

Green (RoHS

& no Sb/Br)

4MDU

250

Green (RoHS

& no Sb/Br)

4MDU

3000

Green (RoHS

& no Sb/Br)

MTU

SOT-23

Green (RoHS

& no Sb/Br)

(4NH3 ~ 4NHU)

Green (RoHS

& no Sb/Br)

Addendum-Page 3

PACKAGE OPTION ADDENDUM

www.ti.com

10-Jun-2014

Orderable Device

Status Package Type Package Pins Package

Eco Plan

Lead/Ball Finish

MSL Peak Temp

Op Temp (°C)

-40 to 85

Device Marking

Samples

Drawing

Qty

(1)

(2)

(6)

(3)

(4/5)

LM4040B25IDBZT

LM4040B25IDBZTG4

LM4040B25IDCKR

LM4040B25IDCKRG4

ACTIVE

SOT-23

SC70

DBZ

250

Green (RoHS

& no Sb/Br)

CU NIPDAU

Level-1-260C-UNLIM

(4NH3 ~ 4NHU)

ACTIVE

DBZ

DCK

250

3000

Green (RoHS

& no Sb/Br)

-40 to 85

(4NH3 ~ 4NHU)

Green (RoHS

& no Sb/Br)

-40 to 85

P3U

SC70

Green (RoHS

& no Sb/Br)

-40 to 85

LM4040B25ILP

LM4040B25ILPR

LM4040B30IDBZR

PREVIEW

ACTIVE

TO-92

1000

2000

3000

TBD

Call TI

-40 to 85

SOT-23

DBZ

Green (RoHS

& no Sb/Br)

CU NIPDAU

Level-1-260C-UNLIM

4M7U

PAU

LM4040B30IDBZRG4

LM4040B30IDBZT

LM4040B30IDCKR

LM4040B30IDCKRG4

ACTIVE

SOT-23

SC70

DBZ

DCK

3000

250

Green (RoHS

& no Sb/Br)

CU NIPDAU

Level-1-260C-UNLIM

-40 to 85

Green (RoHS

& no Sb/Br)

3000

Green (RoHS

& no Sb/Br)

SC70

Green (RoHS

& no Sb/Br)

PAU

LM4040B30IDCKT

LM4040B30ILP

PREVIEW

ACTIVE

SC70

TO-92

SOT-23

DCK

250

TBD

Call TI

-40 to 85

1000

2000

3000

LM4040B30ILPM

LM4040B30ILPR

LM4040B41IDBZR

Call TI

DBZ

Green (RoHS

& no Sb/Br)

CU NIPDAU

Level-1-260C-UNLIM

4M3U

P5U

LM4040B41IDBZT

LM4040B41IDBZTG4

LM4040B41IDCKR

ACTIVE

SOT-23

SC70

DBZ

DCK

250

Green (RoHS

& no Sb/Br)

CU NIPDAU

Level-1-260C-UNLIM

-40 to 85

Green (RoHS

& no Sb/Br)

3000

Green (RoHS

& no Sb/Br)

LM4040B41ILP

PREVIEW

TO-92

1000

2000

TBD

Call TI

-40 to 85

LM4040B41ILPR

Addendum-Page 4

PACKAGE OPTION ADDENDUM

www.ti.com

10-Jun-2014

Orderable Device

Status Package Type Package Pins Package

Eco Plan

Lead/Ball Finish

MSL Peak Temp

Op Temp (°C)

-40 to 85

Device Marking

Samples

Drawing

Qty

(1)

(2)

(6)

(3)

(4/5)

LM4040B50IDBZR

LM4040B50IDBZRG4

LM4040B50IDBZT

LM4040B50IDCKR

ACTIVE

SOT-23

SC70

DBZ

3000

Green (RoHS

& no Sb/Br)

CU NIPDAU

Level-1-260C-UNLIM

(4NB3 ~ 4NBU)

ACTIVE

DBZ

DCK

3000

250

Green (RoHS

& no Sb/Br)

-40 to 85

(4NB3 ~ 4NBU)

MXU

Green (RoHS

& no Sb/Br)

-40 to 85

3000

Green (RoHS

& no Sb/Br)

-40 to 85

LM4040B50ILP

LM4040B50ILPR

LM4040B82IDBZR

PREVIEW

ACTIVE

TO-92

1000

2000

3000

TBD

Call TI

-40 to 85

SOT-23

DBZ

Green (RoHS

& no Sb/Br)

CU NIPDAU

Level-1-260C-UNLIM

4NMU

PEU

LM4040B82IDCKR

LM4040C10IDBZR

LM4040C10IDBZT

LM4040C10IDBZTG4

LM4040C10IDCKR

LM4040C10ILP

ACTIVE

SC70

SOT-23

SC70

DCK

DBZ

DCK

3000

250

Green (RoHS

& no Sb/Br)

CU NIPDAU

CU SN

Level-1-260C-UNLIM

N / A for Pkg Type

-40 to 85

Green (RoHS

& no Sb/Br)

4NSU

PKU

Green (RoHS

& no Sb/Br)

250

Green (RoHS

& no Sb/Br)

3000

1000

2000

3000

250

Green (RoHS

& no Sb/Br)

TO-92

Pb-Free

(RoHS)

NFC10I

4MQU

LM4040C10ILPE3

LM4040C10ILPR

TO-92

Pb-Free

(RoHS)

CU SN

N / A for Pkg Type

TO-92

Pb-Free

(RoHS)

CU SN

N / A for Pkg Type

LM4040C10ILPRE3

LM4040C20IDBZR

LM4040C20IDBZT

LM4040C20IDBZTG4

TO-92

Pb-Free

(RoHS)

CU SN

N / A for Pkg Type

SOT-23

DBZ

Green (RoHS

& no Sb/Br)

CU NIPDAU

Level-1-260C-UNLIM

Green (RoHS

& no Sb/Br)

250

Green (RoHS

& no Sb/Br)

Addendum-Page 5

PACKAGE OPTION ADDENDUM

www.ti.com

10-Jun-2014

Orderable Device

Status Package Type Package Pins Package

Eco Plan

Lead/Ball Finish

MSL Peak Temp

Op Temp (°C)

-40 to 85

-40 to 125

-40 to 85

Device Marking

Samples

Drawing

Qty

(1)

(2)

(6)

(3)

(4/5)

LM4040C20IDCKR

LM4040C20ILP

ACTIVE

SC70

TO-92

SOT-23

SC70

DCK

3000

Green (RoHS

& no Sb/Br)

CU NIPDAU

Level-1-260C-UNLIM

MVU

ACTIVE

1000

2000

3000

250

Pb-Free

(RoHS)

CU SN

N / A for Pkg Type

NFC20I

LM4040C20ILPE3

LM4040C20ILPR

Pb-Free

(RoHS)

CU SN

N / A for Pkg Type

NFC20I

Pb-Free

(RoHS)

CU SN

N / A for Pkg Type

NFC20I

LM4040C20QDBZR

LM4040C20QDBZRG4

LM4040C20QDBZT

LM4040C20QDBZTG4

LM4040C25IDBZR

LM4040C25IDBZRG4

LM4040C25IDBZT

LM4040C25IDBZTG4

LM4040C25IDCKR

LM4040C25IDCKT

LM4040C25IDCKTE4

LM4040C25IDCKTG4

LM4040C25ILP

DBZ

DCK

Green (RoHS

& no Sb/Br)

CU NIPDAU

CU SN

Level-1-260C-UNLIM

N / A for Pkg Type

4MWU

Green (RoHS

& no Sb/Br)

4MWU

Green (RoHS

& no Sb/Br)

4MWU

250

Green (RoHS

& no Sb/Br)

4MWU

3000

250

Green (RoHS

& no Sb/Br)

(4MU3 ~ 4MUU)

MUU

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

250

Green (RoHS

& no Sb/Br)

3000

250

Green (RoHS

& no Sb/Br)

SC70

Green (RoHS

& no Sb/Br)

MUU

SC70

250

Green (RoHS

& no Sb/Br)

MUU

SC70

250

Green (RoHS

& no Sb/Br)

MUU

TO-92

1000

Pb-Free

(RoHS)

NFC25I

LM4040C25ILPE3

Pb-Free

(RoHS)

CU SN

N / A for Pkg Type

NFC25I

Addendum-Page 6

PACKAGE OPTION ADDENDUM

www.ti.com

10-Jun-2014

Orderable Device

Status Package Type Package Pins Package

Eco Plan

Lead/Ball Finish

MSL Peak Temp

Op Temp (°C)

-40 to 85

-40 to 125

-40 to 85

Device Marking

Samples

Drawing

Qty

(1)

(2)

(6)

(3)

(4/5)

LM4040C25ILPR

LM4040C25ILPRE3

LM4040C25QDBZR

LM4040C25QDBZRG4

LM4040C25QDBZT

LM4040C25QDBZTG4

LM4040C30IDBZR

LM4040C30IDBZRG4

LM4040C30IDBZT

ACTIVE

TO-92

2000

Pb-Free

(RoHS)

CU SN

N / A for Pkg Type

NFC25I

ACTIVE

2000

3000

250

Pb-Free

(RoHS)

CU SN

N / A for Pkg Type

NFC25I

SOT-23

SC70

DBZ

DCK

Green (RoHS

& no Sb/Br)

CU NIPDAU

Level-1-260C-UNLIM

(4MA3 ~ 4MAU)

4M8U

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

250

Green (RoHS

& no Sb/Br)

3000

250

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

4M8U

Green (RoHS

& no Sb/Br)

4M8U

LM4040C30IDBZTG4

LM4040C30IDCKR

250

Green (RoHS

& no Sb/Br)

4M8U

3000

Green (RoHS

& no Sb/Br)

PBU

LM4040C30IDCKT

LM4040C30ILP

PREVIEW

ACTIVE

SC70

DCK

250

TBD

Call TI

CU SN

Call TI

-40 to 85

TO-92

1000

Pb-Free

(RoHS)

N / A for Pkg Type

NFC30I

LM4040C30ILPE3

ACTIVE

TO-92

1000

Pb-Free

(RoHS)

CU SN

N / A for Pkg Type

-40 to 85

LM4040C30ILPM

LM4040C30ILPR

PREVIEW

ACTIVE

TO-92

2000

TBD

Call TI

CU SN

Call TI

-40 to 85

Pb-Free

(RoHS)

N / A for Pkg Type

NFC30I

4NJU

LM4040C30QDBZR

LM4040C30QDBZT

LM4040C41IDBZR

ACTIVE

SOT-23

DBZ

3000

250

Green (RoHS

& no Sb/Br)

CU NIPDAU

Level-1-260C-UNLIM

-40 to 125

-40 to 85

Green (RoHS

& no Sb/Br)

4NJU

3000

Green (RoHS

& no Sb/Br)

4M4U

Addendum-Page 7

PACKAGE OPTION ADDENDUM

www.ti.com

10-Jun-2014

Orderable Device

Status Package Type Package Pins Package

Eco Plan

Lead/Ball Finish

MSL Peak Temp

Op Temp (°C)

-40 to 85

-40 to 125

Device Marking

Samples

Drawing

Qty

(1)

(2)

(6)

(3)

(4/5)

LM4040C41IDBZRG4

LM4040C41IDBZT

LM4040C41IDBZTG4

LM4040C41IDCKR

LM4040C41IDCKRE4

LM4040C41IDCKRG4

LM4040C41ILP

ACTIVE

SOT-23

SC70

DBZ

3000

Green (RoHS

& no Sb/Br)

CU NIPDAU

CU SN

Level-1-260C-UNLIM

N / A for Pkg Type

4M4U

P6U

ACTIVE

DBZ

DCK

250

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

3000

1000

2000

3000

250

Green (RoHS

& no Sb/Br)

SC70

Green (RoHS

& no Sb/Br)

P6U

SC70

Green (RoHS

& no Sb/Br)

P6U

TO-92

SOT-23

SC70

Pb-Free

(RoHS)

NFC41I

LM4040C41ILPE3

LM4040C41ILPR

Pb-Free

(RoHS)

CU SN

N / A for Pkg Type

NFC41I

Pb-Free

(RoHS)

CU SN

N / A for Pkg Type

NFC41I

LM4040C50IDBZR

LM4040C50IDBZRG4

LM4040C50IDBZT

LM4040C50IDBZTG4

LM4040C50IDCKR

LM4040C50ILP

DBZ

DCK

Green (RoHS

& no Sb/Br)

CU NIPDAU

CU SN

Level-1-260C-UNLIM

N / A for Pkg Type

(4NC3 ~ 4NCU)

MZU

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

250

Green (RoHS

& no Sb/Br)

3000

1000

2000

3000

Green (RoHS

& no Sb/Br)

TO-92

SOT-23

Pb-Free

(RoHS)

NFC50I

LM4040C50ILPE3

LM4040C50ILPR

Pb-Free

(RoHS)

CU SN

N / A for Pkg Type

NFC50I

Pb-Free

(RoHS)

CU SN

N / A for Pkg Type

NFC50I

LM4040C50QDBZR

DBZ

Green (RoHS

& no Sb/Br)

CU NIPDAU

Level-1-260C-UNLIM

(4NE3 ~ 4NEU)

Addendum-Page 8

PACKAGE OPTION ADDENDUM

www.ti.com

10-Jun-2014

Orderable Device

Status Package Type Package Pins Package

Eco Plan

Lead/Ball Finish

MSL Peak Temp

Op Temp (°C)

-40 to 125

-40 to 85

-40 to 125

Device Marking

Samples

Drawing

Qty

(1)

(2)

(6)

(3)

(4/5)

LM4040C50QDBZT

LM4040C50QDBZTG4

LM4040C82IDBZR

LM4040C82IDCKR

LM4040C82ILP

ACTIVE

SOT-23

SC70

DBZ

250

Green (RoHS

& no Sb/Br)

CU NIPDAU

CU SN

Level-1-260C-UNLIM

N / A for Pkg Type

(4NE3 ~ 4NEU)

ACTIVE

DBZ

DCK

250

3000

1000

2000

3000

250

Green (RoHS

& no Sb/Br)

(4NE3 ~ 4NEU)

4NNU

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

PFU

TO-92

Pb-Free

(RoHS)

NFC82I

4MVU

LM4040C82ILPR

TO-92

Pb-Free

(RoHS)

CU SN

N / A for Pkg Type

LM4040D20IDBZR

LM4040D20IDBZRG4

LM4040D20IDBZT

LM4040D20IDBZTG4

LM4040D20IDCKR

LM4040D20IDCKRE4

LM4040D20IDCKRG4

LM4040D20ILPR

SOT-23

SC70

DBZ

DCK

Green (RoHS

& no Sb/Br)

CU NIPDAU

CU SN

Level-1-260C-UNLIM

N / A for Pkg Type

Green (RoHS

& no Sb/Br)

4MVU

Green (RoHS

& no Sb/Br)

4MVU

250

Green (RoHS

& no Sb/Br)

4MVU

3000

2000

3000

250

Green (RoHS

& no Sb/Br)

MWU

SC70

Green (RoHS

& no Sb/Br)

MWU

SC70

Green (RoHS

& no Sb/Br)

MWU

TO-92

Pb-Free

(RoHS)

NFD20I

4MYU

LM4040D20ILPRE3

LM4040D20QDBZR

LM4040D20QDBZT

LM4040D20QDBZTG4

TO-92

Pb-Free

(RoHS)

CU SN

N / A for Pkg Type

SOT-23

DBZ

Green (RoHS

& no Sb/Br)

CU NIPDAU

Level-1-260C-UNLIM

Green (RoHS

& no Sb/Br)

4MYU

250

Green (RoHS

& no Sb/Br)

4MYU

Addendum-Page 9

PACKAGE OPTION ADDENDUM

www.ti.com

10-Jun-2014

Orderable Device

Status Package Type Package Pins Package

Eco Plan

Lead/Ball Finish

MSL Peak Temp

Op Temp (°C)

-40 to 85

-40 to 125

-40 to 85

Device Marking

Samples

Drawing

Qty

(1)

(2)

(6)

(3)

(4/5)

LM4040D25IDBZR

LM4040D25IDBZRG4

LM4040D25IDBZT

LM4040D25IDBZTG4

LM4040D25IDCKR

LM4040D25IDCKRG4

LM4040D25IDCKT

LM4040D25IDCKTG4

LM4040D25ILP

ACTIVE

SOT-23

SC70

DBZ

3000

Green (RoHS

& no Sb/Br)

CU NIPDAU

CU SN

Level-1-260C-UNLIM

N / A for Pkg Type

(4ME3 ~ 4MEU)

ACTIVE

DBZ

DCK

3000

250

Green (RoHS

& no Sb/Br)

(4ME3 ~ 4MEU)

MEU

Green (RoHS

& no Sb/Br)

250

Green (RoHS

& no Sb/Br)

3000

250

Green (RoHS

& no Sb/Br)

SC70

Green (RoHS

& no Sb/Br)

MEU

SC70

Green (RoHS

& no Sb/Br)

MEU

SC70

250

Green (RoHS

& no Sb/Br)

MEU

TO-92

1000

2000

3000

250

Pb-Free

(RoHS)

NFD25I

LM4040D25ILPE3

LM4040D25ILPR

TO-92

Pb-Free

(RoHS)

CU SN

N / A for Pkg Type

NFD25I

TO-92

Pb-Free

(RoHS)

CU SN

N / A for Pkg Type

NFD25I

LM4040D25QDBZR

LM4040D25QDBZRG4

LM4040D25QDBZT

LM4040D25QDBZTG4

LM4040D30IDBZR

LM4040D30IDBZRG4

LM4040D30IDBZT

SOT-23

DBZ

Green (RoHS

& no Sb/Br)

CU NIPDAU

Level-1-260C-UNLIM

(4MB3 ~ 4MBU)

4M9U

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

250

Green (RoHS

& no Sb/Br)

3000

250

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

4M9U

Green (RoHS

& no Sb/Br)

4M9U

Addendum-Page 10

PACKAGE OPTION ADDENDUM

www.ti.com

10-Jun-2014

Orderable Device

Status Package Type Package Pins Package

Eco Plan

Lead/Ball Finish

MSL Peak Temp

Op Temp (°C)

-40 to 85

Device Marking

Samples

Drawing

Qty

(1)

(2)

(6)

(3)

(4/5)

LM4040D30IDBZTG4

LM4040D30IDCKR

ACTIVE

SOT-23

SC70

DBZ

250

Green (RoHS

& no Sb/Br)

CU NIPDAU

Level-1-260C-UNLIM

4M9U

PCU

ACTIVE

DCK

3000

Green (RoHS

& no Sb/Br)

CU NIPDAU

Level-1-260C-UNLIM

-40 to 85

LM4040D30IDCKT

LM4040D30ILP

PREVIEW

ACTIVE

SC70

DCK

250

TBD

Call TI

CU SN

Call TI

-40 to 85

TO-92

1000

Pb-Free

(RoHS)

N / A for Pkg Type

NFD30I

LM4040D30ILPE3

ACTIVE

TO-92

1000

Pb-Free

(RoHS)

CU SN

N / A for Pkg Type

-40 to 85

LM4040D30ILPM

LM4040D30ILPR

PREVIEW

ACTIVE

TO-92

2000

TBD

Call TI

CU SN

Call TI

-40 to 85

Pb-Free

(RoHS)

N / A for Pkg Type

NFD30I

4NKU

LM4040D30ILPRE3

LM4040D30QDBZR

LM4040D30QDBZRG4

LM4040D41IDBZR

LM4040D41IDBZRG4

LM4040D41IDBZT

LM4040D41IDBZTG4

LM4040D41IDCKR

LM4040D41ILP

ACTIVE

TO-92

SOT-23

SC70

DBZ

DCK

2000

3000

250

Pb-Free

(RoHS)

CU SN

CU NIPDAU

CU SN

N / A for Pkg Type

Level-1-260C-UNLIM

N / A for Pkg Type

-40 to 85

-40 to 125

-40 to 85

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

4NKU

Green (RoHS

& no Sb/Br)

4M5U

Green (RoHS

& no Sb/Br)

4M5U

Green (RoHS

& no Sb/Br)

4M5U

250

Green (RoHS

& no Sb/Br)

4M5U

3000

1000

2000

Green (RoHS

& no Sb/Br)

P7U

TO-92

Pb-Free

(RoHS)

NFD41I

LM4040D41ILPE3

LM4040D41ILPR

TO-92

Pb-Free

(RoHS)

CU SN

TO-92

Pb-Free

(RoHS)

CU SN

LM4040D41ILPRE3

TO-92

Pb-Free

(RoHS)

CU SN

Addendum-Page 11

PACKAGE OPTION ADDENDUM

www.ti.com

10-Jun-2014

Orderable Device

Status Package Type Package Pins Package

Eco Plan

Lead/Ball Finish

MSL Peak Temp

Op Temp (°C)

-40 to 85

-40 to 125

-40 to 85

Device Marking

Samples

Drawing

Qty

(1)

(2)

(6)

(3)

(4/5)

LM4040D50IDBZR

LM4040D50IDBZRG4

LM4040D50IDBZT

LM4040D50IDBZTG4

LM4040D50IDCKR

LM4040D50IDCKRG4

LM4040D50ILP

ACTIVE

SOT-23

SC70

DBZ

3000

Green (RoHS

& no Sb/Br)

CU NIPDAU

CU SN

Level-1-260C-UNLIM

N / A for Pkg Type

(4ND3 ~ 4NDU)

ACTIVE

DBZ

DCK

3000

250

Green (RoHS

& no Sb/Br)

(4ND3 ~ 4NDU)

M4U

Green (RoHS

& no Sb/Br)

250

Green (RoHS

& no Sb/Br)

3000

1000

2000

3000

250

Green (RoHS

& no Sb/Br)

SC70

Green (RoHS

& no Sb/Br)

M4U

TO-92

SOT-23

SC70

Pb-Free

(RoHS)

NFD50I

LM4040D50ILPE3

LM4040D50ILPR

Pb-Free

(RoHS)

CU SN

N / A for Pkg Type

NFD50I

Pb-Free

(RoHS)

CU SN

N / A for Pkg Type

NFD50I

LM4040D50ILPRE3

LM4040D50QDBZR

LM4040D50QDBZT

LM4040D82IDBZR

LM4040D82IDBZT

LM4040D82IDCKR

LM4040D82ILP

Pb-Free

(RoHS)

CU SN

N / A for Pkg Type

NFD50I

DBZ

DCK

Green (RoHS

& no Sb/Br)

CU NIPDAU

CU SN

Level-1-260C-UNLIM

N / A for Pkg Type

(4NF3 ~ 4NFU)

4NPU

Green (RoHS

& no Sb/Br)

3000

250

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

4NPU

3000

1000

2000

Green (RoHS

& no Sb/Br)

PGU

TO-92

Pb-Free

(RoHS)

NFD82I

LM4040D82ILPR

Pb-Free

(RoHS)

CU SN

N / A for Pkg Type

NFD82I

⁽¹⁾The marketing status values are defined as follows:

Addendum-Page 12

PACKAGE OPTION ADDENDUM

www.ti.com

10-Jun-2014

ACTIVE: Product device recommended for new designs.

LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.

NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.

PREVIEW: Device has been announced but is not in production. Samples may or may not be available.

OBSOLETE: TI has discontinued the production of the device.

⁽²⁾Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability

information and additional product content details.

TBD: The Pb-Free/Green conversion plan has not been defined.

Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that

lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.

Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between

the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.

Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight

in homogeneous material)

⁽³⁾MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.

⁽⁴⁾There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.

⁽⁵⁾Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation

of the previous line and the two combined represent the entire Device Marking for that device.

⁽⁶⁾Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish

value exceeds the maximum column width.

Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information

provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and

continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.

TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.

In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.

OTHER QUALIFIED VERSIONS OF LM4040C25 :

Enhanced Product: LM4040C25-EP

•

NOTE: Qualified Version Definitions:

Addendum-Page 13

PACKAGE OPTION ADDENDUM

www.ti.com

10-Jun-2014

Enhanced Product - Supports Defense, Aerospace and Medical Applications

•

Addendum-Page 14

PACKAGE MATERIALS INFORMATION

www.ti.com

12-Aug-2013

TAPE AND REEL INFORMATION

*All dimensions are nominal

Device

Package Package Pins

Type Drawing

SPQ

Reel

Pin1

Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant

(mm) W1 (mm)

LM4040A10IDBZR

LM4040A10IDBZT

LM4040A10IDCKR

LM4040A20IDBZR

LM4040A20IDBZT

LM4040A20IDCKR

LM4040A25IDBZR

LM4040A25IDBZT

LM4040A25IDCKR

LM4040A30IDBZR

LM4040A30IDBZT

LM4040A30IDCKR

LM4040A41IDBZR

LM4040A41IDBZT

LM4040A41IDCKR

LM4040A50IDBZR

LM4040A50IDBZT

LM4040A50IDCKR

SOT-23

SC70

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

3000

250

179.0

178.0

179.0

178.0

179.0

8.4

9.2

8.4

9.2

8.4

3.15

2.2

2.95

2.5

1.22

1.2

4.0

8.0

3000

250

SOT-23

SC70

3.15

2.2

2.95

2.5

1.22

1.2

3000

250

SOT-23

SC70

3.08

2.2

2.8

1.27

1.2

2.8

3000

250

2.5

SOT-23

SC70

3.15

2.2

2.95

2.5

1.22

1.2

3000

250

SOT-23

SC70

3.15

2.2

2.95

2.5

1.22

1.2

3000

250

SOT-23

SC70

3.08

2.2

2.8

1.27

1.2

2.8

3000

2.5

Pack Materials-Page 1

PACKAGE MATERIALS INFORMATION

www.ti.com

12-Aug-2013

Device

Package Package Pins

Type Drawing

SPQ

Reel

Pin1

Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant

(mm) W1 (mm)

LM4040A82IDBZR

LM4040A82IDBZT

LM4040A82IDCKR

LM4040B10IDBZR

LM4040B10IDBZT

LM4040B10IDCKR

LM4040B20IDBZR

LM4040B20IDBZT

LM4040B20IDCKR

LM4040B25IDBZR

LM4040B25IDBZT

LM4040B25IDCKR

LM4040B30IDBZR

LM4040B30IDBZT

LM4040B30IDCKR

LM4040B41IDBZR

LM4040B41IDBZT

LM4040B41IDCKR

LM4040B50IDBZR

LM4040B50IDBZT

LM4040B50IDCKR

LM4040B82IDBZR

LM4040B82IDCKR

LM4040C10IDBZR

LM4040C10IDBZT

LM4040C10IDCKR

LM4040C20IDBZR

LM4040C20IDBZT

LM4040C20IDCKR

LM4040C20QDBZR

LM4040C20QDBZT

LM4040C25IDBZR

LM4040C25IDBZT

LM4040C25IDCKR

LM4040C25IDCKT

LM4040C25QDBZR

LM4040C25QDBZT

LM4040C30IDBZR

LM4040C30IDBZT

LM4040C30IDCKR

LM4040C30QDBZR

LM4040C30QDBZT

LM4040C41IDBZR

SOT-23

SC70

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

3000

250

179.0

178.0

179.0

178.0

179.0

178.0

179.0

178.0

179.0

8.4

9.2

8.4

9.2

8.4

9.2

8.4

9.2

8.4

3.15

2.2

2.95

2.5

1.22

1.2

4.0

8.0

3000

250

SOT-23

SC70

3.15

2.2

2.95

2.5

1.22

1.2

3000

250

SOT-23

SC70

3.15

2.2

2.95

2.5

1.22

1.2

3000

250

SOT-23

SC70

3.08

2.2

2.8

1.27

1.2

2.8

3000

250

2.5

SOT-23

SC70

3.15

2.2

2.95

2.5

1.22

1.2

3000

250

SOT-23

SC70

3.15

2.2

2.95

2.5

1.22

1.2

3000

250

SOT-23

SC70

3.08

2.2

2.8

1.27

1.2

2.8

3000

250

2.5

SOT-23

SC70

3.15

2.2

2.95

2.5

1.22

1.2

SOT-23

SC70

3.15

2.2

2.95

2.5

1.22

1.2

3000

250

SOT-23

SC70

3.15

2.2

2.95

2.5

1.22

1.2

3000

250

SOT-23

SC70

3.15

3.08

2.2

2.95

2.8

1.22

1.27

1.2

3000

250

2.8

3000

250

2.5

SC70

2.2

2.5

1.2

SOT-23

SC70

3000

250

3.08

3.15

2.2

2.8

1.27

1.22

1.2

2.8

3000

250

2.95

2.5

3000

250

SOT-23

3.15

2.95

1.22

3000

Pack Materials-Page 2

PACKAGE MATERIALS INFORMATION

www.ti.com

12-Aug-2013

Device

Package Package Pins

Type Drawing

SPQ

Reel

Pin1

Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant

(mm) W1 (mm)

LM4040C41IDBZT

LM4040C41IDCKR

LM4040C50IDBZR

LM4040C50IDBZT

LM4040C50IDCKR

LM4040C50QDBZR

LM4040C50QDBZT

LM4040C82IDBZR

LM4040C82IDCKR

LM4040D20IDBZR

LM4040D20IDBZT

LM4040D20IDCKR

LM4040D20QDBZR

LM4040D20QDBZT

LM4040D25IDBZR

LM4040D25IDBZT

LM4040D25IDCKR

LM4040D25IDCKT

LM4040D25QDBZR

LM4040D25QDBZT

LM4040D30IDBZR

LM4040D30IDBZT

LM4040D30IDCKR

LM4040D30QDBZR

LM4040D41IDBZR

LM4040D41IDBZT

LM4040D41IDCKR

LM4040D50IDBZR

LM4040D50IDBZT

LM4040D50IDCKR

LM4040D50QDBZR

LM4040D50QDBZT

LM4040D82IDBZR

LM4040D82IDBZT

LM4040D82IDCKR

SOT-23

SC70

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

250

3000

250

179.0

178.0

179.0

178.0

179.0

178.0

179.0

178.0

179.0

178.0

179.0

178.0

179.0

8.4

9.2

8.4

9.2

8.4

9.2

8.4

9.2

8.4

9.2

8.4

9.2

8.4

3.15

2.2

2.95

2.5

1.22

1.2

4.0

8.0

SOT-23

SC70

3.08

2.2

2.8

1.27

1.2

2.8

3000

250

2.5

SOT-23

SC70

3.08

3.15

2.2

2.8

1.27

1.22

1.2

2.8

3000

250

2.95

2.5

SOT-23

SC70

3.15

2.2

2.95

2.5

1.22

1.2

3000

250

SOT-23

SC70

3.15

3.08

2.2

2.95

2.8

1.22

1.27

1.2

3000

250

2.8

3000

250

2.5

SC70

2.2

2.5

1.2

SOT-23

SC70

3000

250

3.08

3.15

2.2

2.8

1.27

1.22

1.2

2.8

3000

250

2.95

2.5

3000

250

SOT-23

SC70

3.15

2.2

2.95

2.5

1.22

1.2

3000

250

SOT-23

SC70

3.08

2.2

2.8

1.27

1.2

2.8

3000

250

2.5

SOT-23

SC70

3.08

3.15

2.2

2.8

1.27

1.22

1.2

2.8

3000

250

2.95

2.5

3000

Pack Materials-Page 3

PACKAGE MATERIALS INFORMATION

www.ti.com

12-Aug-2013

*All dimensions are nominal

Device

Package Type Package Drawing Pins

SPQ

Length (mm) Width (mm) Height (mm)

LM4040A10IDBZR

LM4040A10IDBZT

LM4040A10IDCKR

LM4040A20IDBZR

LM4040A20IDBZT

LM4040A20IDCKR

LM4040A25IDBZR

LM4040A25IDBZT

LM4040A25IDCKR

LM4040A30IDBZR

LM4040A30IDBZT

LM4040A30IDCKR

LM4040A41IDBZR

LM4040A41IDBZT

LM4040A41IDCKR

LM4040A50IDBZR

LM4040A50IDBZT

LM4040A50IDCKR

LM4040A82IDBZR

LM4040A82IDBZT

SOT-23

SC70

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

3000

250

203.0

180.0

203.0

180.0

203.0

180.0

203.0

180.0

203.0

35.0

18.0

35.0

18.0

35.0

3000

250

SOT-23

SC70

3000

250

SOT-23

SC70

3000

250

SOT-23

SC70

3000

250

SOT-23

SC70

3000

250

SOT-23

SC70

3000

250

SOT-23

Pack Materials-Page 4

PACKAGE MATERIALS INFORMATION

www.ti.com

12-Aug-2013

Device

Package Type Package Drawing Pins

SPQ

Length (mm) Width (mm) Height (mm)

LM4040A82IDCKR

LM4040B10IDBZR

LM4040B10IDBZT

LM4040B10IDCKR

LM4040B20IDBZR

LM4040B20IDBZT

LM4040B20IDCKR

LM4040B25IDBZR

LM4040B25IDBZT

LM4040B25IDCKR

LM4040B30IDBZR

LM4040B30IDBZT

LM4040B30IDCKR

LM4040B41IDBZR

LM4040B41IDBZT

LM4040B41IDCKR

LM4040B50IDBZR

LM4040B50IDBZT

LM4040B50IDCKR

LM4040B82IDBZR

LM4040B82IDCKR

LM4040C10IDBZR

LM4040C10IDBZT

LM4040C10IDCKR

LM4040C20IDBZR

LM4040C20IDBZT

LM4040C20IDCKR

LM4040C20QDBZR

LM4040C20QDBZT

LM4040C25IDBZR

LM4040C25IDBZT

LM4040C25IDCKR

LM4040C25IDCKT

LM4040C25QDBZR

LM4040C25QDBZT

LM4040C30IDBZR

LM4040C30IDBZT

LM4040C30IDCKR

LM4040C30QDBZR

LM4040C30QDBZT

LM4040C41IDBZR

LM4040C41IDBZT

LM4040C41IDCKR

LM4040C50IDBZR

SC70

SOT-23

SC70

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

3000

250

203.0

180.0

203.0

180.0

203.0

180.0

203.0

180.0

203.0

180.0

203.0

180.0

203.0

180.0

203.0

180.0

203.0

180.0

203.0

180.0

35.0

18.0

35.0

18.0

35.0

18.0

35.0

18.0

35.0

18.0

3000

250

SOT-23

SC70

3000

250

SOT-23

SC70

3000

250

SOT-23

SC70

3000

250

SOT-23

SC70

3000

250

SOT-23

SC70

3000

250

SOT-23

SC70

SOT-23

SC70

3000

250

SOT-23

SC70

3000

250

SOT-23

SC70

3000

250

3000

250

SC70

SOT-23

SC70

3000

250

3000

250

3000

250

SOT-23

SC70

3000

250

3000

SOT-23

Pack Materials-Page 5

PACKAGE MATERIALS INFORMATION

www.ti.com

12-Aug-2013

Device

Package Type Package Drawing Pins

SPQ

Length (mm) Width (mm) Height (mm)

LM4040C50IDBZT

LM4040C50IDCKR

LM4040C50QDBZR

LM4040C50QDBZT

LM4040C82IDBZR

LM4040C82IDCKR

LM4040D20IDBZR

LM4040D20IDBZT

LM4040D20IDCKR

LM4040D20QDBZR

LM4040D20QDBZT

LM4040D25IDBZR

LM4040D25IDBZT

LM4040D25IDCKR

LM4040D25IDCKT

LM4040D25QDBZR

LM4040D25QDBZT

LM4040D30IDBZR

LM4040D30IDBZT

LM4040D30IDCKR

LM4040D30QDBZR

LM4040D41IDBZR

LM4040D41IDBZT

LM4040D41IDCKR

LM4040D50IDBZR

LM4040D50IDBZT

LM4040D50IDCKR

LM4040D50QDBZR

LM4040D50QDBZT

LM4040D82IDBZR

LM4040D82IDBZT

LM4040D82IDCKR

SOT-23

SC70

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

DBZ

DCK

250

3000

250

180.0

203.0

180.0

203.0

180.0

203.0

180.0

203.0

180.0

203.0

180.0

203.0

180.0

203.0

180.0

203.0

180.0

203.0

180.0

203.0

180.0

203.0

180.0

203.0

18.0

35.0

18.0

35.0

18.0

35.0

18.0

35.0

18.0

35.0

18.0

35.0

SOT-23

SC70

3000

250

SOT-23

SC70

3000

250

SOT-23

SC70

3000

250

3000

250

SC70

SOT-23

SC70

3000

250

3000

250

3000

250

SOT-23

SC70

3000

250

SOT-23

SC70

3000

250

SOT-23

SC70

3000

250

3000

Pack Materials-Page 6

IMPORTANT NOTICE

Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other

changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest

issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and

complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale

supplied at the time of order acknowledgment.

TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms

and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary

to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily

performed.

TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and

applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide

adequate design and operating safeguards.

TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or

other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information

published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or

endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the

third party, or a license from TI under the patents or other intellectual property of TI.

Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration

and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered

documentation. Information of third parties may be subject to additional restrictions.

Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service

voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.

TI is not responsible or liable for any such statements.

Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements

concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support

that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which

anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause

harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use

of any TI components in safety-critical applications.

In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to

help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and

requirements. Nonetheless, such components are subject to these terms.

No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties

have executed a special agreement specifically governing such use.

Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in

military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components

which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and

regulatory requirements in connection with such use.

TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of

non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.

Products

Applications

Audio

www.ti.com/audio

amplifier.ti.com

dataconverter.ti.com

www.dlp.com

Automotive and Transportation www.ti.com/automotive

Communications and Telecom www.ti.com/communications

Amplifiers

Data Converters

DLP® Products

DSP

Computers and Peripherals

Consumer Electronics

Energy and Lighting

Industrial

www.ti.com/computers

www.ti.com/consumer-apps

www.ti.com/energy

dsp.ti.com

Clocks and Timers

Interface

www.ti.com/clocks

interface.ti.com

logic.ti.com

www.ti.com/industrial

www.ti.com/medical

Medical

Logic

Security

www.ti.com/security

Power Mgmt

Microcontrollers

RFID

power.ti.com

Space, Avionics and Defense

Video and Imaging

www.ti.com/space-avionics-defense

www.ti.com/video

microcontroller.ti.com

www.ti-rfid.com

www.ti.com/omap

OMAP Applications Processors

Wireless Connectivity

TI E2E Community

e2e.ti.com

www.ti.com/wirelessconnectivity

Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265

LM4040D10ILPRE3 [TI]

相关型号：

LM4040D20IDBZR

LM4040D20IDBZR

LM4040D20IDBZRG4

LM4040D20IDBZT

LM4040D20IDBZT

LM4040D20IDBZTG4

LM4040D20IDCKR

LM4040D20IDCKR

LM4040D20IDCKRE4

LM4040D20IDCKRG4

LM4040D20IDCKT

LM4040D20ILP