LMH0202MT/NOPB [TI]
SMPTE 292M/259M 串行数字电缆驱动器 | PW | 16 | 0 to 70;型号: | LMH0202MT/NOPB |
厂家: | TEXAS INSTRUMENTS |
描述: | SMPTE 292M/259M 串行数字电缆驱动器 | PW | 16 | 0 to 70 驱动 光电二极管 接口集成电路 驱动器 |
文件: | 总13页 (文件大小:351K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
LMH0202
www.ti.com
SNLS212C –FEBRUARY 2006–REVISED APRIL 2013
LMH0202 Dual SMPTE 292M / 259M Serial Digital Cable Driver
Check for Samples: LMH0202
1
FEATURES
DESCRIPTION
The LMH0202 Dual SMPTE 292M / 259M serial
digital cable driver is a monolithic, high-speed cable
driver designed for use in SMPTE 292M / 259M serial
digital video and ITU-T G.703 serial digital data
transmission applications. The LMH0202 drives 75Ω
transmission lines (Belden 8281, Belden 1694A or
equivalent) at data rates up to 1.485 Gbps.
2
•
SMPTE 292M, SMPTE 344M and SMPTE 259M
Compliant
•
•
•
•
•
•
•
•
Data Rates to 1.485 Gbps
Dual Differential Inputs
Dual 75Ω Differential Outputs
Two Selectable Slew Rates
The LMH0202 provides two selectable slew rates for
SMPTE 259M and SMPTE 292M compliance. The
output voltage swing is adjustable via a single
external resistor.
Adjustable Output Amplitude
Single 3.3V Supply Operation
Commercial Temperature Range: 0°C to +70°C
Typical Power Consumption: 250 mW in SD
Mode and 300 mW in HD Mode
The LMH0202 offers the flexibility to implement either
dual differential inputs or a single differential input
(externally routed via PCB) to dual differential
outputs. The latter option provides an ideal solution
for DVB-ASI applications where only the non-inverted
outputs are typically used.
APPLICATIONS
•
SMPTE 292M, SMPTE 344M, and SMPTE 259M
Serial Digital Interfaces
The LMH0202 is powered from a single 3.3V supply.
Power consumption is typically 250 mW in SD mode
and 300 mW in HD mode.
•
•
•
•
•
•
DVB-ASI Applications
Sonet/SDH and ATM Interfaces
Digital Routers and Switches
Distribution Amplifiers
Buffer Applications
Video Cameras
Connection Diagram
1
2
16
SDI1
SDI1
SDO1
15
SDO1
3
4
5
6
14
SD/HD1
V
R
1
EE
13
1
V
CC
1
REF
12
11
10
9
SDI2
SDI2
SDO2
SDO2
7
8
V
R
2
EE
SD/HD2
2
V
CC
2
REF
Figure 1. 16-Pin TSSOP
See PW Package
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2006–2013, Texas Instruments Incorporated
LMH0202
SNLS212C –FEBRUARY 2006–REVISED APRIL 2013
www.ti.com
Typical Application
V
CC
SD/HD1
0.1 mF
1.0 mF
75W
75W
50W
5.6 nH
4.7 mF
4.7 mF
Coaxial Cable
Coaxial Cable
75W
Differential
Input
50W
SDI1
SDI1
SDO1
SDO1
1.0 mF
75W
75W
0.1 mF
V
CC
5.6 nH
SD/HD1
75W
R
REF
1
750W
0.1 mF
V
CC
75W
75W
5.6 nH
1.0 mF
1.0 mF
4.7 mF
4.7 mF
Coaxial Cable
Coaxial Cable
75W
SDI2
SDI2
SDO2
SDO2
50W
50W
75W
75W
5.6 nH
Differential
Input
SD/HD2
75W
R
REF
2
V
CC
0.1 mF
750W
SD/HD2
2
Submit Documentation Feedback
Copyright © 2006–2013, Texas Instruments Incorporated
Product Folder Links: LMH0202
LMH0202
www.ti.com
SNLS212C –FEBRUARY 2006–REVISED APRIL 2013
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings(1)
Supply Voltage:
−0.5V to 3.6V
−0.3V to VCC+0.3V
28 mA
Input Voltage (all inputs)
Output Current
Storage Temperature Range
Junction Temperature
Lead Temperature (Soldering 4 Sec)
−65°C to +150°C
+150°C
+260°C
Package Thermal Resistance
θJA 16-pin TSSOP
θJC 16-pin TSSOP
+125°C/W
+105°C/W
ESD Rating (HBM)
ESD Rating (MM)
5 kV
250V
(1) Absolute Maximum Ratings are those parameter values beyond which the life and operation of the device cannot be ensured. The
stating herein of these maximums shall not be construed to imply that the device can or should be operated at or beyond these values.
The table of Electrical Characteristics specifies acceptable device operating conditions.
Recommended Operating Conditions
Supply Voltage (VCC – VEE):
3.3V ±5%
Operating Free Air Temperature (TA)
0°C to +70°C
DC Electrical Characteristics
Over Supply Voltage and Operating Temperature ranges, unless otherwise specified(1)(2)
.
Symbol Parameter
VCMIN Input Common Mode Voltage
Conditions
Reference
Min
Typ
Max
VCC
VSDI/2
Units
V
SDI1, SDI1,
SDI2, SDI2
1.6 +
VSDI/2
–
VSDI
Input Voltage Swing
Differential
100
2000
mVP−P
V
VCMOUT Output Common Mode Voltage
SDO1,
SDO1,
VCC –
VSDO
SDO2, SDO2
VSDO
Output Voltage Swing
Single-ended, 75Ω load,
RREF1 = 750Ω 1%,
RREF2 = 750Ω 1%
750
800
850
mVP-P
mVP-P
Single-ended, 75Ω load,
RREF1 = 590Ω 1%,
RREF2 = 590Ω 1%
900
2.4
1000
1100
VSDHD
SD/HD Input Voltage
Min for SD
Max for HD
SD/HD1,
SD/HD2
V
0.8
V
ISDHD
ICC
SD/HD Input Current
Supply Current
3.7
90
76
µA
mA
mA
SD/HD1 = 0, SD/HD2 = 0(3)
SD/HD1 = 1, SD/HD2 = 1(3)
98
86
(1) Current flow into device pins is defined as positive. Current flow out of device pins is defined as negative. All voltages are stated
referenced to VEE = 0 Volts.
(2) Typical values are stated for VCC = +3.3V and TA = +25°C.
(3) Maximum ICC is measured at VCC = +3.465V and TA = +70°C.
Copyright © 2006–2013, Texas Instruments Incorporated
Submit Documentation Feedback
3
Product Folder Links: LMH0202
LMH0202
SNLS212C –FEBRUARY 2006–REVISED APRIL 2013
www.ti.com
AC Electrical Characteristics
Over Supply Voltage and Operating Temperature ranges, unless otherwise specified(1)
.
Symbol
Parameter
Conditions
Reference
Min
Typ
Max
Units
DRSDI
Input Data Rate
(2)SDI1, SDI1,
SDI2, SDI2
1485
Mbps
tjit
Additive Jitter
1.485 Gbps
270 Mbps
SDO1, SDO1,
SDO2, SDO2
26
18
psP-P
psP-P
tr,tf
Output Rise Time, Fall Time
SD/HD1 = 0, SD/HD2 = 0,
20% – 80%(3)
120
560
220
800
ps
ps
SD/HD1 = 1, SD/HD2 = 1,
400
15
20% – 80%(3)
(2)
Mismatch in Rise/Fall Time
Output Overshoot
30
8
ps
%
(2)
(4)
tOS
RLSDO
Output Return Loss
20
dB
(1) Typical values are stated for VCC = +3.3V and TA = +25°C.
(2) Specification is ensured by characterization.
(3) Specification is ensured by characterization and verified by test.
(4) Output return loss is dependent on board design. The LMH0202 meets this specification on the SD202 evaluation board from 5 MHz to
1.5 GHz.
4
Submit Documentation Feedback
Copyright © 2006–2013, Texas Instruments Incorporated
Product Folder Links: LMH0202
LMH0202
www.ti.com
SNLS212C –FEBRUARY 2006–REVISED APRIL 2013
Table 1. PIN DESCRIPTIONS
Pin #
Name
Description
1
2
SDI1
SDI1
Serial data true input.
Serial data complement input.
Negative power supply (ground).
3
VEE1
4
RREF
SDI2
SDI2
1
Output driver level control. Connect a resistor to VCC to set output voltage swing.
Serial data true input.
5
6
Serial data complement input.
7
VEE
RREF
VCC
2
Negative power supply (ground).
8
2
Output driver level control. Connect a resistor to VCC to set output voltage swing.
Positive power supply (+3.3V).
9
2
10
SD/HD2
Output slew rate control. Output rise/fall time complies with SMPTE 292M when low and SMPTE 259M
when high.
11
12
13
14
SDO2
SDO2
Serial data complement output.
Serial data true output.
VCC1
Positive power supply (+3.3V).
SD/HD1
Output slew rate control. Output rise/fall time complies with SMPTE 292M when low and SMPTE 259M
when high.
15
16
SDO1
SDO1
Serial data complement output.
Serial data true output.
DEVICE OPERATION
INPUT INTERFACING
The LMH0202 accepts either differential or single-ended input. The inputs are self-biased, allowing for simple AC
or DC coupling. DC-coupled inputs must be kept within the specified common-mode range. SDI and SDI are self-
biased at approximately 2.1V with VCC = 3.3V. Figure 2 shows the differential input stage for SDI and SDI.
V
CC
SDI
SDI
V
CC
5 k:
10 k:
80:
10 k:
10 k:
Figure 2. Differential Input Stage for SDI and SDI.
Copyright © 2006–2013, Texas Instruments Incorporated
Submit Documentation Feedback
5
Product Folder Links: LMH0202
LMH0202
SNLS212C –FEBRUARY 2006–REVISED APRIL 2013
www.ti.com
DVB-ASI APPLICATIONS
The dual differential inputs of the LMH0202 may be externally routed to a single differential input as shown in
Figure 3. This provides a solution for DVB-ASI applications where two non-inverted outputs are needed.
LMH0202
1.0 mF
25W
SDI1
50W
50W
SDI1
25W
25W
Differential
Input
SDI2
SDI2
1.0 mF
25W
0.1 mF
Figure 3. Single Differential Input for DVB-ASI
OUTPUT INTERFACING
The LMH0202 uses current mode outputs. Single-ended output levels are 800 mVP-P into 75Ω AC-coupled
coaxial cable (with RREF = 750Ω). Output level is controlled by the value of the resistor connected between the
RREF pin and VCC
.
The RREF resistor should be placed as close as possible to the RREF pin. In addition, the copper in the plane
layers below the RREF network should be removed to minimize parasitic capacitance.
OUTPUT SLEW RATE CONTROL
The LMH0202 output rise and fall times are selectable for either SMPTE 259M or SMPTE 292M compliance via
the SD/HD pin. For slower rise and fall times, or SMPTE 259M compliance, SD/HD is set high. For faster rise
and fall times, or SMPTE 292M compliance, SD/HD is set low.
6
Submit Documentation Feedback
Copyright © 2006–2013, Texas Instruments Incorporated
Product Folder Links: LMH0202
LMH0202
www.ti.com
SNLS212C –FEBRUARY 2006–REVISED APRIL 2013
REVISION HISTORY
Changes from Revision B (April 2013) to Revision C
Page
•
Changed layout of National Data Sheet to TI format ............................................................................................................ 6
Copyright © 2006–2013, Texas Instruments Incorporated
Submit Documentation Feedback
7
Product Folder Links: LMH0202
PACKAGE OPTION ADDENDUM
www.ti.com
10-Dec-2020
PACKAGING INFORMATION
Orderable Device
Status Package Type Package Pins Package
Eco Plan
Lead finish/
Ball material
MSL Peak Temp
Op Temp (°C)
Device Marking
Samples
Drawing
Qty
(1)
(2)
(3)
(4/5)
(6)
LMH0202MT/NOPB
ACTIVE
TSSOP
PW
16
92
RoHS & Green
SN
Level-1-260C-UNLIM
0 to 70
L202
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance
do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may
reference these types of products as "Pb-Free".
RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.
Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of <=1000ppm threshold. Antimony trioxide based
flame retardants must also meet the <=1000ppm threshold requirement.
(3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.
(5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.
(6)
Lead finish/Ball material - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead finish/Ball material values may wrap to two
lines if the finish value exceeds the maximum column width.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
5-Jan-2022
TUBE
*All dimensions are nominal
Device
Package Name Package Type
PW TSSOP
Pins
SPQ
L (mm)
W (mm)
T (µm)
B (mm)
LMH0202MT/NOPB
16
92
495
8
2514.6
4.06
Pack Materials-Page 1
PACKAGE OUTLINE
PW0016A
TSSOP - 1.2 mm max height
S
C
A
L
E
2
.
5
0
0
SMALL OUTLINE PACKAGE
SEATING
PLANE
C
6.6
6.2
TYP
A
0.1 C
PIN 1 INDEX AREA
14X 0.65
16
1
2X
5.1
4.9
4.55
NOTE 3
8
9
0.30
16X
4.5
4.3
NOTE 4
1.2 MAX
0.19
B
0.1
C A B
(0.15) TYP
SEE DETAIL A
0.25
GAGE PLANE
0.15
0.05
0.75
0.50
A
20
0 -8
DETAIL A
TYPICAL
4220204/A 02/2017
NOTES:
1. All linear dimensions are in millimeters. Any dimensions in parenthesis are for reference only. Dimensioning and tolerancing
per ASME Y14.5M.
2. This drawing is subject to change without notice.
3. This dimension does not include mold flash, protrusions, or gate burrs. Mold flash, protrusions, or gate burrs shall not
exceed 0.15 mm per side.
4. This dimension does not include interlead flash. Interlead flash shall not exceed 0.25 mm per side.
5. Reference JEDEC registration MO-153.
www.ti.com
EXAMPLE BOARD LAYOUT
PW0016A
TSSOP - 1.2 mm max height
SMALL OUTLINE PACKAGE
SYMM
16X (1.5)
(R0.05) TYP
16
1
16X (0.45)
SYMM
14X (0.65)
8
9
(5.8)
LAND PATTERN EXAMPLE
EXPOSED METAL SHOWN
SCALE: 10X
METAL UNDER
SOLDER MASK
SOLDER MASK
OPENING
SOLDER MASK
OPENING
METAL
EXPOSED METAL
EXPOSED METAL
0.05 MAX
ALL AROUND
0.05 MIN
ALL AROUND
NON-SOLDER MASK
DEFINED
SOLDER MASK
DEFINED
15.000
(PREFERRED)
SOLDER MASK DETAILS
4220204/A 02/2017
NOTES: (continued)
6. Publication IPC-7351 may have alternate designs.
7. Solder mask tolerances between and around signal pads can vary based on board fabrication site.
www.ti.com
EXAMPLE STENCIL DESIGN
PW0016A
TSSOP - 1.2 mm max height
SMALL OUTLINE PACKAGE
16X (1.5)
SYMM
(R0.05) TYP
16
1
16X (0.45)
SYMM
14X (0.65)
8
9
(5.8)
SOLDER PASTE EXAMPLE
BASED ON 0.125 mm THICK STENCIL
SCALE: 10X
4220204/A 02/2017
NOTES: (continued)
8. Laser cutting apertures with trapezoidal walls and rounded corners may offer better paste release. IPC-7525 may have alternate
design recommendations.
9. Board assembly site may have different recommendations for stencil design.
www.ti.com
IMPORTANT NOTICE AND DISCLAIMER
TI PROVIDES TECHNICAL AND RELIABILITY DATA (INCLUDING DATA SHEETS), DESIGN RESOURCES (INCLUDING REFERENCE
DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS”
AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY
IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD
PARTY INTELLECTUAL PROPERTY RIGHTS.
These resources are intended for skilled developers designing with TI products. You are solely responsible for (1) selecting the appropriate
TI products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable
standards, and any other safety, security, regulatory or other requirements.
These resources are subject to change without notice. TI grants you permission to use these resources only for development of an
application that uses the TI products described in the resource. Other reproduction and display of these resources is prohibited. No license
is granted to any other TI intellectual property right or to any third party intellectual property right. TI disclaims responsibility for, and you
will fully indemnify TI and its representatives against, any claims, damages, costs, losses, and liabilities arising out of your use of these
resources.
TI’s products are provided subject to TI’s Terms of Sale or other applicable terms available either on ti.com or provided in conjunction with
such TI products. TI’s provision of these resources does not expand or otherwise alter TI’s applicable warranties or warranty disclaimers for
TI products.
TI objects to and rejects any additional or different terms you may have proposed. IMPORTANT NOTICE
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2022, Texas Instruments Incorporated
相关型号:
©2020 ICPDF网 联系我们和版权申明