LMP2011MF/NOPB [TI]
单路、高精度、轨到轨输出运算放大器 | DBV | 5 | -40 to 125;![LMP2011MF/NOPB](http://pdffile.icpdf.com/pdf2/p00222/img/icpdf/LMP2012MMX-N_1296343_icpdf.jpg)
型号: | LMP2011MF/NOPB |
厂家: | ![]() |
描述: | 单路、高精度、轨到轨输出运算放大器 | DBV | 5 | -40 to 125 放大器 运算放大器 |
文件: | 总25页 (文件大小:1431K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
![](http://public.icpdf.com/style/img/ads.jpg)
LMP2011, LMP2012
www.ti.com
SNOSA71K –OCTOBER 2004–REVISED MARCH 2013
LMP2011 Single/LMP2012 Dual High Precision, Rail-to-Rail Output Operational Amplifier
Check for Samples: LMP2011, LMP2012
1
FEATURES
DESCRIPTION
The LMP201X series are the first members of TI's
new LMPTM precision amplifier family. The LMP201X
series offers unprecedented accuracy and stability in
space-saving miniature packaging while also being
offered at an affordable price. This device utilizes
patented techniques to measure and continually
correct the input offset error voltage. The result is an
amplifier which is ultra stable over time and
temperature. It has excellent CMRR and PSRR
ratings, and does not exhibit the familiar 1/f voltage
and current noise increase that plagues traditional
amplifiers. The combination of the LMP201X
characteristics makes it a good choice for transducer
amplifiers, high gain configurations, ADC buffer
amplifiers, DAC I-V conversion, and any other 2.7V-
5V application requiring precision and long term
stability.
2
(For VS = 5V, Typical Unless Otherwise Noted)
•
•
•
•
•
•
•
•
•
•
Low Ensured VOS Over Temperature 60 µV
Low Noise with No 1/f 35nV/√Hz
High CMRR 130 dB
High PSRR 120 dB
High AVOL 130 dB
Wide Gain-Bandwidth Product 3MHz
High Slew Rate 4V/µs
Low Supply Current 930µA
Rail-to-Rail Output 30mV
No External Capacitors Required
APPLICATIONS
•
•
•
Precision Instrumentation Amplifiers
Thermocouple Amplifiers
Other useful benefits of the LMP201X are rail-to-rail
output, a low supply current of 930 µA, and wide
gain-bandwidth product of 3 MHz. These extremely
versatile features found in the LMP201X provide high
performance and ease of use.
Strain Gauge Bridge Amplifier
Connection Diagram
1
8
N/C
N/C
2
3
4
-
7
6
5
+
-
V
V
IN
+
V
IN
V
OUT
+
-
N/C
V
Figure 1. 5-Pin SOT-23 Single
(LMP2011)
Figure 2. 8-Pin Single SOIC
(LMP2011)
Figure 3. 8-Pin Dual
SOIC/VSSOP (LMP2012)
Top View
Top View
Top View
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2004–2013, Texas Instruments Incorporated
LMP2011, LMP2012
SNOSA71K –OCTOBER 2004–REVISED MARCH 2013
www.ti.com
(1)(2)
Absolute Maximum Ratings
ESD Tolerance
Human Body Model
Machine Model
2000V
200V
5.8V
Supply Voltage
Common-Mode Input Voltage
Lead Temperature (soldering 10 sec.)
Differential Input Voltage
Current at Input Pin
−0.3 ≤ VCM ≤ VCC +0.3V
+300°C
±Supply Voltage
30 mA
Current at Output Pin
30 mA
Current at Power Supply Pin
50 mA
(1) Absolute Maximum Ratings indicate limits beyond which damage may occur. Operating Ratings indicate conditions for which the device
is intended to be functional, but specific performance is not ensured. For ensured specifications and test conditions, see the Electrical
Characteristics.
(2) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/ Distributors for availability and
specifications.
(1)
Operating Ratings
Supply Voltage
2.7V to 5.25V
−65°C to 150°C
−40°C to 125°C
Storage Temperature Range
Operating Temperature Range
(1) Absolute Maximum Ratings indicate limits beyond which damage may occur. Operating Ratings indicate conditions for which the device
is intended to be functional, but specific performance is not ensured. For ensured specifications and test conditions, see the Electrical
Characteristics.
2.7V DC Electrical Characteristics
Unless otherwise specified, all limits ensured for TJ = 25°C, V+ = 2.7V, V− = 0V, V CM = 1.35V, VO = 1.35V and RL > 1 MΩ.
Boldface limits apply at the temperature extremes.
(1)
(2)
(1)
Symbol
VOS
Parameter
Conditions
Min
Typ
0.8
Max
Units
Input Offset Voltage
(LMP2011 only)
25
60
μV
Input Offset Voltage
(LMP2012 only)
0.8
0.5
36
60
Offset Calibration Time
10
ms
12
TCVOS
Input Offset Voltage
Long-Term Offset Drift
Lifetime VOS Drift
0.015
0.006
2.5
-3
μV/°C
μV/month
μV
IIN
Input Current
pA
IOS
Input Offset Current
Input Differential Resistance
Common Mode Rejection Ratio
6
pA
RIND
CMRR
9
MΩ
−0.3 ≤ VCM ≤ 0.9V
95
130
dB
0 ≤ VCM ≤ 0.9V
90
PSRR
AVOL
Power Supply Rejection Ratio
Open Loop Voltage Gain
95
90
120
130
124
dB
dB
RL = 10 kΩ
RL = 2 kΩ
95
90
90
85
(1) Limits are 100% production tested at 25°C. Limits over the operating temperature range are ensured through correlations using
statistical quality control (SQC) method.
(2) Typical values represent the most likely parametric norm.
2
Submit Documentation Feedback
Copyright © 2004–2013, Texas Instruments Incorporated
Product Folder Links: LMP2011 LMP2012
LMP2011, LMP2012
www.ti.com
SNOSA71K –OCTOBER 2004–REVISED MARCH 2013
2.7V DC Electrical Characteristics (continued)
Unless otherwise specified, all limits ensured for TJ = 25°C, V+ = 2.7V, V− = 0V, V CM = 1.35V, VO = 1.35V and RL > 1 MΩ.
Boldface limits apply at the temperature extremes.
(1)
(2)
(1)
Symbol
VO
Parameter
Conditions
Min
Typ
2.68
Max
Units
Output Swing
RL = 10 kΩ to 1.35V
2.665
(LMP2011 only)
VIN(diff) = ±0.5V
2.655
V
0.033
2.65
0.061
2.68
0.033
2.65
0.061
12
0.060
0.075
RL = 2 kΩ to 1.35V
VIN(diff) = ±0.5V
2.630
2.615
V
V
V
0.085
0.105
Output Swing
(LMP2012 only)
RL = 10 kΩ to 1.35V
VIN(diff) = ±0.5V
2.64
2.63
0.060
0.075
RL = 2 kΩ to 1.35V
VIN(diff) = ±0.5V
2.615
2.6
0.085
0.105
IO
Output Current
Sourcing, VO = 0V
VIN(diff) = ±0.5V
5
3
mA
mA
Sinking, VO = 5V
VIN(diff) = ±0.5V
5
3
18
IS
Supply Current per Channel
0.919
1.20
1.50
2.7V AC Electrical Characteristics
TJ = 25°C, V+ = 2.7V, V− = 0V, VCM = 1.35V, VO = 1.35V, and RL > 1 MΩ. Boldface limits apply at the temperature extremes.
(1)
(2)
(1)
Symbol
GBW
Parameter
Gain-Bandwidth Product
Slew Rate
Conditions
Min
Typ
3
Max
Units
MHz
V/μs
SR
θ m
Gm
en
4
Phase Margin
60
Deg
Gain Margin
−14
dB
Input-Referred Voltage Noise
Input-Referred Current Noise
Input-Referred Voltage Noise
Input Overload Recovery Time
35
nV/√Hz
pA/√Hz
nVpp
ms
in
enp-p
trec
RS = 100Ω, DC to 10 Hz
850
50
(1) Limits are 100% production tested at 25°C. Limits over the operating temperature range are ensured through correlations using
statistical quality control (SQC) method.
(2) Typical values represent the most likely parametric norm.
5V DC Electrical Characteristics
Unless otherwise specified, all limits ensured for TJ = 25°C, V+ = 5V, V− = 0V, V CM = 2.5V, VO = 2.5V and RL > 1MΩ.
Boldface limits apply at the temperature extremes.
(1)
(2)
(1)
Symbol
VOS
Parameter
Conditions
Min
Typ
0.12
Max
Units
μV
Input Offset Voltage
(LMP2011 only)
25
60
Input Offset Voltage
(LMP2012 only)
0.12
0.5
36
60
Offset Calibration Time
10
ms
12
(1) Limits are 100% production tested at 25°C. Limits over the operating temperature range are ensured through correlations using
statistical quality control (SQC) method.
(2) Typical values represent the most likely parametric norm.
Copyright © 2004–2013, Texas Instruments Incorporated
Submit Documentation Feedback
3
Product Folder Links: LMP2011 LMP2012
LMP2011, LMP2012
SNOSA71K –OCTOBER 2004–REVISED MARCH 2013
www.ti.com
5V DC Electrical Characteristics (continued)
Unless otherwise specified, all limits ensured for TJ = 25°C, V+ = 5V, V− = 0V, V CM = 2.5V, VO = 2.5V and RL > 1MΩ.
Boldface limits apply at the temperature extremes.
(1)
(2)
(1)
Symbol
Parameter
Input Offset Voltage
Long-Term Offset Drift
Lifetime VOS Drift
Conditions
Min
Typ
Max
Units
μV/°C
μV/month
μV
TCVOS
0.015
0.006
2.5
-3
IIN
Input Current
pA
IOS
Input Offset Current
6
pA
RIND
CMRR
Input Differential Resistance
Common Mode Rejection Ratio
9
MΩ
−0.3 ≤ VCM ≤ 3.2
100
130
dB
0 ≤ VCM ≤ 3.2
90
PSRR
AVOL
Power Supply Rejection Ratio
Open Loop Voltage Gain
95
90
120
130
dB
dB
RL = 10 kΩ
RL = 2 kΩ
105
100
95
132
90
VO
Output Swing
(LMP2011 only)
RL = 10 kΩ to 2.5V
VIN(diff) = ±0.5V
4.96
4.95
4.978
0.040
4.919
0.091
4.978
0.040
4.919
0.0.91
15
V
V
V
V
0.070
0.085
RL = 2 kΩ to 2.5V
VIN(diff) = ±0.5V
4.895
4.875
0.115
0.140
Output Swing
(LMP2012 only)
RL = 10 kΩ to 2.5V
VIN(diff) = ±0.5V
4.92
4.91
0.080
0.095
RL = 2 kΩ to 2.5V
VIN(diff) = ±0.5V
4.875
4.855
0.125
0.150
IO
Output Current
Sourcing, VO = 0V
VIN(diff) = ±0.5V
8
6
mA
mA
Sinking, VO = 5V
V IN(diff) = ±0.5V
8
6
17
IS
Supply Current per Channel
0.930
1.20
1.50
5V AC Electrical Characteristics
TJ = 25°C, V+ = 5V, V− = 0V, VCM = 2.5V, VO = 2.5V, and RL > 1MΩ. Boldface limits apply at the temperature extremes.
(1)
(2)
(1)
Symbol
GBW
Parameter
Gain-Bandwidth Product
Slew Rate
Conditions
Min
Typ
3
Max
Units
MHz
V/μs
deg
SR
θ m
Gm
en
4
Phase Margin
60
Gain Margin
−15
dB
Input-Referred Voltage Noise
Input-Referred Current Noise
Input-Referred Voltage Noise
Input Overload Recovery Time
35
nV/√Hz
pA/√Hz
nVpp
ms
in
enp-p
trec
RS = 100Ω, DC to 10 Hz
850
50
(1) Limits are 100% production tested at 25°C. Limits over the operating temperature range are ensured through correlations using
statistical quality control (SQC) method.
(2) Typical values represent the most likely parametric norm.
4
Submit Documentation Feedback
Copyright © 2004–2013, Texas Instruments Incorporated
Product Folder Links: LMP2011 LMP2012
LMP2011, LMP2012
www.ti.com
SNOSA71K –OCTOBER 2004–REVISED MARCH 2013
Typical Performance Characteristics
TA=25C, VS= 5V unless otherwise specified.
Supply Current vs. Supply Voltage
Offset Voltage vs. Supply Voltage
Figure 4.
Figure 5.
Offset Voltage vs. Common Mode
Offset Voltage vs. Common Mode
Figure 6.
Figure 7.
Voltage Noise vs. Frequency
Input Bias Current vs. Common Mode
500
400
300
200
100
0
10000
1000
100
V
= 5V
V = 5V
S
S
-100
-200
-300
-400
-500
10
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
(V)
0.1
1M
1k
10k 100k
1
10
100
V
CM
FREQUENCY (Hz)
Figure 8.
Figure 9.
Copyright © 2004–2013, Texas Instruments Incorporated
Submit Documentation Feedback
5
Product Folder Links: LMP2011 LMP2012
LMP2011, LMP2012
SNOSA71K –OCTOBER 2004–REVISED MARCH 2013
www.ti.com
Typical Performance Characteristics (continued)
TA=25C, VS= 5V unless otherwise specified.
PSRR vs. Frequency
PSRR vs. Frequency
120
120
100
80
V
V
= 2.7V
V
= 5V
S
S
= 1V
V = 2.5V
CM
CM
100
80
NEGATIVE
NEGATIVE
60
60
40
40
POSITIVE
POSITIVE
20
0
20
0
10
100
1k
10k 100k
1M
10M
10
100
1k
10k 100k
1M
10M
FREQUENCY (Hz)
FREQUENCY (Hz)
Figure 10.
Figure 11.
Output Sourcing @ 2.7V
Output Sourcing @ 5V
Figure 12.
Figure 13.
Output Sinking @ 2.7V
Output Sinking @ 5V
Figure 14.
Figure 15.
6
Submit Documentation Feedback
Copyright © 2004–2013, Texas Instruments Incorporated
Product Folder Links: LMP2011 LMP2012
LMP2011, LMP2012
www.ti.com
SNOSA71K –OCTOBER 2004–REVISED MARCH 2013
Typical Performance Characteristics (continued)
TA=25C, VS= 5V unless otherwise specified.
Max Output Swing vs. Supply Voltage
Max Output Swing vs. Supply Voltage
Figure 16.
Figure 17.
Min Output Swing vs. Supply Voltage
Min Output Swing vs. Supply Voltage
Figure 18.
Figure 19.
CMRR vs. Frequency
Open Loop Gain and Phase vs. Supply Voltage
100
150.0
140
V
S
= 5V
V
= 5V
S
120
100
80
120.0
PHASE
V
= 5V
S
60
40
20
0
90.0
60.0
80
60
40
20
0
GAIN
30.0
0.0
R
C
= 1M
L
L
V
= 2.7V
S
= < 20pF
= 2.7V OR 5V
V
S
-30.0
10M
-20
100k
1M
100
1k
10k
10
100
1k
100k
100k
FREQUENCY (Hz)
FREQUENCY (Hz)
Figure 20.
Figure 21.
Copyright © 2004–2013, Texas Instruments Incorporated
Submit Documentation Feedback
7
Product Folder Links: LMP2011 LMP2012
LMP2011, LMP2012
SNOSA71K –OCTOBER 2004–REVISED MARCH 2013
www.ti.com
Typical Performance Characteristics (continued)
TA=25C, VS= 5V unless otherwise specified.
Open Loop Gain and Phase vs. RL @ 2.7V
Open Loop Gain and Phase vs. RL @ 5V
100
80
100
80
150.0
150.0
R
= >1M
L
120.0
120.0
PHASE
PHASE
R
L
= 2k
60
40
20
0
60
40
20
0
90.0
60.0
90.0
60.0
R
= >1M
L
GAIN
R
= >1M
L
R
= >1M
L
GAIN
30.0
0.0
30.0
0.0
V
= 5V
V
= 2.7V
S
S
R
= 2k
L
C
= < 20 pF
= >1M & 2k
C
= < 20 pF
L
L
L
L
R
L
= 2k
R
R
= >1M & 2k
-30.0
-30.0
-20
-20
100k
FREQUENCY (Hz)
Figure 22.
100k
100
1k
10k
1M
10M
100
1k
10k
1M
10M
FREQUENCY (Hz)
Figure 23.
Open Loop Gain and Phase vs. CL @ 2.7V
Open Loop Gain and Phase vs. CL @ 5V
100
80
150.0
100
150.0
10pF
10pF
120.0
80
60
40
20
0
120.0
PHASE
PHASE
10pF
60
40
20
0
90.0
90.0
10pF
500pF
60.0
500pF
60.0
30.0
0.0
GAIN
GAIN
30.0
0.0
V
= 2.7V, R = >1M
L
S
V
= 5V, R = >1M
L
S
500pF
1M
C
L
= 10,50,200 & 500pF
500pF
C
= 10,50,200 & 500pF
L
-30.0
10M
-20
-20
100
-30.0
10M
100k
1k
10k
10k
1M
100k
100
1k
FREQUENCY (Hz)
FREQUENCY (Hz)
Figure 24.
Figure 25.
Open Loop Gain and Phase vs. Temperature @ 2.7V
Open Loop Gain and Phase vs. Temperature @ 5V
113
90
68
45
23
0
113
90
68
45
23
0
100
80
60
40
20
0
100
80
60
40
20
0
PHASE
PHASE
-40°C
-40°C
-40°C
-40°C
GAIN
GAIN
25°C
25°C
85°C
85°C
85°C
85°C
V
V
= 2.7V
V
= 5V
S
S
= 200 mV
PP
V
= 200 mV
PP
OUT
OUT
R
= >1M
R
= >1M
L
L
L
L
C
= < 20 pF
C
= < 20pF
-23
-23
-20
-20
1k
10k
100k
1M
10M
1k
10k
100k
1M
10M
FREQUENCY (Hz)
FREQUENCY (Hz)
Figure 26.
Figure 27.
8
Submit Documentation Feedback
Copyright © 2004–2013, Texas Instruments Incorporated
Product Folder Links: LMP2011 LMP2012
LMP2011, LMP2012
www.ti.com
SNOSA71K –OCTOBER 2004–REVISED MARCH 2013
Typical Performance Characteristics (continued)
TA=25C, VS= 5V unless otherwise specified.
THD+N vs. AMPL
THD+N vs. Frequency
10
10
MEAS FREQ = 1 KHz
V
= 2 V
PP
OUT
MEAS BW = 500 kHz
MEAS BW = 22 KHz
R
= 10k
= +10
L
R
= 10k
= +10
L
A
V
A
V
1
0.1
V = 2.7V
S
1
V
S
= 2.7V
V
= 5V
S
0.1
0.01
V
S
= 5V
V
S
= 5V
V
= 2.7V
100
S
0.01
0.1
1
10
10
1k
10k
100k
OUTPUT VOLTAGE (V
)
PP
FREQUENCY (Hz)
Figure 28.
Figure 29.
0.1 Hz − 10 Hz Noise vs. Time
1 sec/DIV
Figure 30.
Copyright © 2004–2013, Texas Instruments Incorporated
Submit Documentation Feedback
9
Product Folder Links: LMP2011 LMP2012
LMP2011, LMP2012
SNOSA71K –OCTOBER 2004–REVISED MARCH 2013
www.ti.com
APPLICATION INFORMATION
THE BENEFITS OF LMP201X
NO 1/f NOISE
Using patented methods, the LMP201X eliminates the 1/f noise present in other amplifiers. That noise, which
increases as frequency decreases, is a major source of measurement error in all DC-coupled measurements.
Low-frequency noise appears as a constantly-changing signal in series with any measurement being made. As a
result, even when the measurement is made rapidly, this constantly-changing noise signal will corrupt the result.
The value of this noise signal can be surprisingly large. For example: If a conventional amplifier has a flat-band
noise level of 10nV/√Hz and a noise corner of 10 Hz, the RMS noise at 0.001 Hz is 1µV/√Hz. This is equivalent
to a 0.50 µV peak-to-peak error, in the frequency range 0.001 Hz to 1.0 Hz. In a circuit with a gain of 1000, this
produces a 0.50 mV peak-to-peak output error. This number of 0.001 Hz might appear unreasonably low, but
when a data acquisition system is operating for 17 minutes, it has been on long enough to include this error. In
this same time, the LMP201X will only have a 0.21 mV output error. This is smaller by 2.4 x. Keep in mind that
this 1/f error gets even larger at lower frequencies. At the extreme, many people try to reduce this error by
integrating or taking several samples of the same signal. This is also doomed to failure because the 1/f nature of
this noise means that taking longer samples just moves the measurement into lower frequencies where the noise
level is even higher.
The LMP201X eliminates this source of error. The noise level is constant with frequency so that reducing the
bandwidth reduces the errors caused by noise.
Another source of error that is rarely mentioned is the error voltage caused by the inadvertent thermocouples
created when the common "Kovar type" IC package lead materials are soldered to a copper printed circuit board.
These steel-based leadframe materials can produce over 35 μV/°C when soldered onto a copper trace. This can
result in thermocouple noise that is equal to the LMP201X noise when there is a temperature difference of only
0.0014°C between the lead and the board!
For this reason, the lead-frame of the LMP201X is made of copper. This results in equal and opposite junctions
which cancel this effect. The extremely small size of the SOT-23 package results in the leads being very close
together. This further reduces the probability of temperature differences and hence decreases thermal noise.
OVERLOAD RECOVERY
The LMP201X recovers from input overload much faster than most chopper-stabilized op amps. Recovery from
driving the amplifier to 2X the full scale output, only requires about 40 ms. Many chopper-stabilized amplifiers will
take from 250 ms to several seconds to recover from this same overload. This is because large capacitors are
used to store the unadjusted offset voltage.
Figure 31. Overload Recovery Test
The wide bandwidth of the LMP201X enhances performance when it is used as an amplifier to drive loads that
inject transients back into the output. ADCs (Analog-to-Digital Converters) and multiplexers are examples of this
type of load. To simulate this type of load, a pulse generator producing a 1V peak square wave was connected
to the output through a 10 pF capacitor. (Figure 31) The typical time for the output to recover to 1% of the
applied pulse is 80 ns. To recover to 0.1% requires 860ns. This rapid recovery is due to the wide bandwidth of
the output stage and large total GBW.
NO EXTERNAL CAPACITORS REQUIRED
The LMP201X does not need external capacitors. This eliminates the problems caused by capacitor leakage and
dielectric absorption, which can cause delays of several seconds from turn-on until the amplifier's error has
settled.
10
Submit Documentation Feedback
Copyright © 2004–2013, Texas Instruments Incorporated
Product Folder Links: LMP2011 LMP2012
LMP2011, LMP2012
www.ti.com
SNOSA71K –OCTOBER 2004–REVISED MARCH 2013
MORE BENEFITS
The LMP201X offers the benefits mentioned above and more. It has a rail-to-rail output and consumes only 950
µA of supply current while providing excellent DC and AC electrical performance. In DC performance, the
LMP201X achieves 130 dB of CMRR, 120 dB of PSRR and 130 dB of open loop gain. In AC performance, the
LMP201X provides 3 MHz of gain-bandwidth product and 4 V/µs of slew rate.
HOW THE LMP201X WORKS
The LMP201X uses new, patented techniques to achieve the high DC accuracy traditionally associated with
chopper-stabilized amplifiers without the major drawbacks produced by chopping. The LMP201X continuously
monitors the input offset and corrects this error. The conventional chopping process produces many mixing
products, both sums and differences, between the chopping frequency and the incoming signal frequency. This
mixing causes large amounts of distortion, particularly when the signal frequency approaches the chopping
frequency. Even without an incoming signal, the chopper harmonics mix with each other to produce even more
trash. If this sounds unlikely or difficult to understand, look at the plot (Figure 32), of the output of a typical
(MAX432) chopper-stabilized op amp. This is the output when there is no incoming signal, just the amplifier in a
gain of -10 with the input grounded. The chopper is operating at about 150 Hz; the rest is mixing products. Add
an input signal and the noise gets much worse. Compare this plot with Figure 33 of the LMP201X. This data was
taken under the exact same conditions. The auto-zero action is visible at about 30 kHz but note the absence of
mixing products at other frequencies. As a result, the LMP201X has very low distortion of 0.02% and very low
mixing products.
Figure 32. The Output of a Chopper Stabilized Op Amp (MAX432)
10000
V
= 5V
S
1000
100
10
0.1
1M
1k
10k 100k
1
10
100
FREQUENCY (Hz)
Figure 33. The Output of the LMP2011/LMP2012
Copyright © 2004–2013, Texas Instruments Incorporated
Submit Documentation Feedback
11
Product Folder Links: LMP2011 LMP2012
LMP2011, LMP2012
SNOSA71K –OCTOBER 2004–REVISED MARCH 2013
www.ti.com
INPUT CURRENTS
The LMP201X's input currents are different than standard bipolar or CMOS input currents in that it appears as a
current flowing in one input and out the other. Under most operating conditions, these currents are in the
picoamp level and will have little or no effect in most circuits. These currents tend to increase slightly when the
common-mode voltage is near the minus supply. (See the typical curves.) At high temperatures such as 85°C,
the input currents become larger, 0.5 nA typical, and are both positive except when the VCM is near V−. If
operation is expected at low common-mode voltages and high temperature, do not add resistance in series with
the inputs to balance the impedances. Doing this can cause an increase in offset voltage. A small resistance
such as 1 kΩ can provide some protection against very large transients or overloads, and will not increase the
offset significantly.
PRECISION STRAIN-GAUGE AMPLIFIER
This Strain-Gauge amplifier (Figure 34) provides high gain (1006 or ~60 dB) with very low offset and drift. Using
the resistors' tolerances as shown, the worst case CMRR will be greater than 108 dB. The CMRR is directly
related to the resistor mismatch. The rejection of common-mode error, at the output, is independent of the
differential gain, which is set by R3. The CMRR is further improved, if the resistor ratio matching is improved, by
specifying tighter-tolerance resistors, or by trimming.
5V
+
V
OUT
-
+
-
R1
R2
2k, 1%
R2
R1
10k, 0.1%
10k, 0.1%
2k, 1%
R3
20W
Figure 34. Precision Strain Gauge Amplifier
Extending Supply Voltages and Output Swing by Using a Composite Amplifier Configuration:
In cases where substantially higher output swing is required with higher supply voltages, arrangements like the
ones shown in Figure 35 and Figure 36 could be used. These configurations utilize the excellent DC performance
of the LMP201X while at the same time allow the superior voltage and frequency capabilities of the LM6171 to
set the dynamic performance of the overall amplifier. For example, it is possible to achieve ±12V output swing
with 300 MHz of overall GBW (AV = 100) while keeping the worst case output shift due to VOS less than 4 mV.
The LMP201X output voltage is kept at about mid-point of its overall supply voltage, and its input common mode
voltage range allows the V- terminal to be grounded in one case (Figure 35, inverting operation) and tied to a
small non-critical negative bias in another (Figure 36, non-inverting operation). Higher closed-loop gains are also
possible with a corresponding reduction in realizable bandwidth. Table 1 shows some other closed loop gain
possibilities along with the measured performance in each case.
12
Submit Documentation Feedback
Copyright © 2004–2013, Texas Instruments Incorporated
Product Folder Links: LMP2011 LMP2012
LMP2011, LMP2012
www.ti.com
SNOSA71K –OCTOBER 2004–REVISED MARCH 2013
Figure 35. Composite Amplifier Configuration
Table 1. Composite Amplifier Measured Performance
AV
R1
R2
C2
BW
SR
en p-p
(Ω)
(Ω)
(pF)
(MHz)
(V/μs)
(mVPP
)
50
100
100
500
1000
200
100
1k
10k
10k
8
3.3
2.5
178
174
170
96
37
10
70
100k
100k
100k
0.67
1.75
2.2
3.1
70
200
100
1.4
250
400
0.98
64
In terms of the measured output peak-to-peak noise, the following relationship holds between output noise
voltage, en p-p, for different closed-loop gain, AV, settings, where −3 dB Bandwidth is BW:
(1)
C2
R2
R7, 3.9k
+15V
1N4731A
(4.3V)
D1
C4
0.01
mF
R1
2
3
7
-
3
7
LMP201X
U1
+
Output
6
6
LM6171
U2
+
4
-15V
Input
2
-
4
R6
(-0.7V)
10k
+15V
(+2.5V)
R5, 1M
R3
C5
0.01 mF
20k
C3
0.01 mF
D2
1N4148
R4
3.9k
Figure 36. Composite Amplifier Configuration
Copyright © 2004–2013, Texas Instruments Incorporated
Submit Documentation Feedback
13
Product Folder Links: LMP2011 LMP2012
LMP2011, LMP2012
SNOSA71K –OCTOBER 2004–REVISED MARCH 2013
www.ti.com
It should be kept in mind that in order to minimize the output noise voltage for a given closed-loop gain setting,
one could minimize the overall bandwidth. As can be seen from Equation 1 above, the output noise has a
square-root relationship to the Bandwidth.
In the case of the inverting configuration, it is also possible to increase the input impedance of the overall
amplifier, by raising the value of R1, without having to increase the feed-back resistor, R2, to impractical values,
by utilizing a "Tee" network as feedback. See the LMC6442 data sheet (Application Notes section) for more
details on this.
+5V
430W
(0V to 5V Range)
+Input
+5V
+V
REF
+2.5V
-
ADC1203X
LMP201X
+
-V
REF
LM9140-2.5
-Input
V
IN
GND
1M
Figure 37. AC Coupled ADC Driver
LMP201X AS ADC INPUT AMPLIFIER
The LMP201X is a great choice for an amplifier stage immediately before the input of an ADC (Analog-to-Digital
Converter), whether AC or DC coupled. See Figure 37 and Figure 38. This is because of the following important
characteristics:
A)
Very low offset voltage and offset voltage drift over time and temperature allow a high closed-loop gain
setting without introducing any short-term or long-term errors. For example, when set to a closed-loop gain
of 100 as the analog input amplifier for a 12-bit A/D converter, the overall conversion error over full
operation temperature and 30 years life of the part (operating at 50°C) would be less than 5 LSBs.
B)
C)
Fast large-signal settling time to 0.01% of final value (1.4 μs) allows 12 bit accuracy at 100 KHZ or more
sampling rate
No flicker (1/f) noise means unsurpassed data accuracy over any measurement period of time, no matter
how long. Consider the following op amp performance, based on a typical low-noise, high-performance
commercially-available device, for comparison:
Op amp flatband noise = 8nV/√Hz
1/f corner frequency = 100 Hz
AV = 2000
Measurement time = 100 sec
Bandwidth = 2 Hz
This example will result in about 2.2 mVPP (1.9 LSB) of output noise contribution due to the op amp alone,
compared to about 594 μVPP (less than 0.5 LSB) when that op amp is replaced with the LMP201X which
has no 1/f contribution. If the measurement time is increased from 100 seconds to 1 hour, the
improvement realized by using the LMP201X would be a factor of about 4.8 times (2.86 mVPP compared
to 596 μV when LMP201X is used) mainly because the LMP201X accuracy is not compromised by
increasing the observation time.
D)
E)
Copper leadframe construction minimizes any thermocouple effects which would degrade low level/high
gain data conversion application accuracy (see discussion under The Benefits of the LMP201X section
above).
Rail-to-Rail output swing maximizes the ADC dynamic range in 5-Volt single-supply converter applications.
Below are some typical block diagrams showing the LMP201X used as an ADC amplifier (Figure 37 and
Figure 38).
14
Submit Documentation Feedback
Copyright © 2004–2013, Texas Instruments Incorporated
Product Folder Links: LMP2011 LMP2012
LMP2011, LMP2012
www.ti.com
SNOSA71K –OCTOBER 2004–REVISED MARCH 2013
Figure 38. DC Coupled ADC Driver
Copyright © 2004–2013, Texas Instruments Incorporated
Submit Documentation Feedback
15
Product Folder Links: LMP2011 LMP2012
LMP2011, LMP2012
SNOSA71K –OCTOBER 2004–REVISED MARCH 2013
www.ti.com
REVISION HISTORY
Changes from Revision J (March 2013) to Revision K
Page
•
Changed layout of National Data Sheet to TI format .......................................................................................................... 15
16
Submit Documentation Feedback
Copyright © 2004–2013, Texas Instruments Incorporated
Product Folder Links: LMP2011 LMP2012
PACKAGE OPTION ADDENDUM
www.ti.com
7-Oct-2013
PACKAGING INFORMATION
Orderable Device
LMP2011MA/NOPB
LMP2011MAX/NOPB
Status Package Type Package Pins Package
Eco Plan Lead/Ball Finish
MSL Peak Temp
Op Temp (°C)
-40 to 125
Device Marking
Samples
Drawing
Qty
(1)
(2)
(3)
(4/5)
ACTIVE
SOIC
SOIC
D
8
8
95
Green (RoHS
& no Sb/Br)
CU SN
CU SN
Level-1-260C-UNLIM
LMP20
11MA
ACTIVE
D
2500
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
-40 to 125
LMP20
11MA
LMP2011MF
ACTIVE
ACTIVE
SOT-23
SOT-23
DBV
DBV
5
5
1000
1000
TBD
Call TI
CU SN
Call TI
-40 to 125
-40 to 125
AN1A
LMP2011MF/NOPB
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
AN1A
LMP2011MFX/NOPB
LMP2012MA/NOPB
LMP2012MAX/NOPB
LMP2012MM/NOPB
LMP2012MMX/NOPB
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
SOT-23
SOIC
DBV
D
5
8
8
8
8
3000
95
Green (RoHS
& no Sb/Br)
CU SN
CU SN
CU SN
CU SN
CU SN
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
-40 to 125
-40 to 125
-40 to 125
-40 to 125
-40 to 125
AN1A
Green (RoHS
& no Sb/Br)
LMP20
12MA
SOIC
D
2500
1000
3500
Green (RoHS
& no Sb/Br)
LMP20
12MA
VSSOP
VSSOP
DGK
DGK
Green (RoHS
& no Sb/Br)
AP1A
Green (RoHS
& no Sb/Br)
AP1A
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
7-Oct-2013
(4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.
(5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com
23-Sep-2013
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
B0
K0
P1
W
Pin1
Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant
(mm) W1 (mm)
LMP2011MAX/NOPB
LMP2011MF
SOIC
SOT-23
SOT-23
SOT-23
SOIC
D
8
5
5
5
8
8
8
2500
1000
1000
3000
2500
1000
3500
330.0
178.0
178.0
178.0
330.0
178.0
330.0
12.4
8.4
6.5
3.2
3.2
3.2
6.5
5.3
5.3
5.4
3.2
3.2
3.2
5.4
3.4
3.4
2.0
1.4
1.4
1.4
2.0
1.4
1.4
8.0
4.0
4.0
4.0
8.0
8.0
8.0
12.0
8.0
Q1
Q3
Q3
Q3
Q1
Q1
Q1
DBV
DBV
DBV
D
LMP2011MF/NOPB
LMP2011MFX/NOPB
LMP2012MAX/NOPB
LMP2012MM/NOPB
LMP2012MMX/NOPB
8.4
8.0
8.4
8.0
12.4
12.4
12.4
12.0
12.0
12.0
VSSOP
VSSOP
DGK
DGK
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
23-Sep-2013
*All dimensions are nominal
Device
Package Type Package Drawing Pins
SPQ
Length (mm) Width (mm) Height (mm)
LMP2011MAX/NOPB
LMP2011MF
SOIC
SOT-23
SOT-23
SOT-23
SOIC
D
8
5
5
5
8
8
8
2500
1000
1000
3000
2500
1000
3500
367.0
210.0
210.0
210.0
367.0
210.0
367.0
367.0
185.0
185.0
185.0
367.0
185.0
367.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
DBV
DBV
DBV
D
LMP2011MF/NOPB
LMP2011MFX/NOPB
LMP2012MAX/NOPB
LMP2012MM/NOPB
LMP2012MMX/NOPB
VSSOP
VSSOP
DGK
DGK
Pack Materials-Page 2
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.
Products
Applications
Audio
www.ti.com/audio
amplifier.ti.com
dataconverter.ti.com
www.dlp.com
Automotive and Transportation www.ti.com/automotive
Communications and Telecom www.ti.com/communications
Amplifiers
Data Converters
DLP® Products
DSP
Computers and Peripherals
Consumer Electronics
Energy and Lighting
Industrial
www.ti.com/computers
www.ti.com/consumer-apps
www.ti.com/energy
dsp.ti.com
Clocks and Timers
Interface
www.ti.com/clocks
interface.ti.com
logic.ti.com
www.ti.com/industrial
www.ti.com/medical
Medical
Logic
Security
www.ti.com/security
Power Mgmt
Microcontrollers
RFID
power.ti.com
Space, Avionics and Defense
Video and Imaging
www.ti.com/space-avionics-defense
www.ti.com/video
microcontroller.ti.com
www.ti-rfid.com
www.ti.com/omap
OMAP Applications Processors
Wireless Connectivity
TI E2E Community
e2e.ti.com
www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2013, Texas Instruments Incorporated
相关型号:
![](http://pdffile.icpdf.com/pdf2/p00268/img/page/LMP2011MAX-N_1612384_files/LMP2011MAX-N_1612384_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00268/img/page/LMP2011MAX-N_1612384_files/LMP2011MAX-N_1612384_2.jpg)
LMP2011MFX/NOPB
IC OP-AMP, 60 uV OFFSET-MAX, 3 MHz BAND WIDTH, PDSO5, ROHS COMPLIANT, SOT-23, 5 PIN, Operational Amplifier
NSC
©2020 ICPDF网 联系我们和版权申明