MM5452VX/NOPB [TI]
液晶显示驱动器(LCD 驱动器) | FN | 44 | -40 to 85;型号: | MM5452VX/NOPB |
厂家: | TEXAS INSTRUMENTS |
描述: | 液晶显示驱动器(LCD 驱动器) | FN | 44 | -40 to 85 驱动 CD 输入元件 接口集成电路 显示驱动器 |
文件: | 总16页 (文件大小:1300K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MM5452, MM5453
www.ti.com
SNLS367C –FEBRUARY 1995–REVISED MARCH 2013
MM5452/MM5453 Liquid Crystal Display Drivers
Check for Samples: MM5452, MM5453
1
FEATURES
DESCRIPTION
The MM5452 is a monolithic integrated circuit utilizing
CMOS metal gate, low threshold enhancement mode
devices. It is available in a 40-pin PDIP package. The
chip can drive up to 32 segments of LCD and can be
paralleled to increase this number. The chip is
capable of driving a 4½-digit 7-segment display with
minimal interface between the display and the data
source.
2
•
•
•
•
•
•
•
•
Serial Data Input
No Load Signal Required
DATA ENABLE (MM5452)
Wide Power Supply Operation
TTL Compatibility
32 or 33 Outputs
Alphanumeric and Bar Graph Capability
Cascaded Operation Capability
The MM5452 stores display data in latches after it is
clocked in, and holds the data until new display data
is received.
APPLICATIONS
•
•
•
COPS™ or Microprocessor Displays
Industrial Control Indicator
Digital Clock, Thermometer, Counter,
Voltmeter
•
•
Instrumentation Readouts
Remote Displays
Block Diagram
Figure 1.
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 1995–2013, Texas Instruments Incorporated
MM5452, MM5453
SNLS367C –FEBRUARY 1995–REVISED MARCH 2013
www.ti.com
(1)(2)
Absolute Maximum Ratings
Voltage at Any Pin, Referenced to Gnd
-0.3V to +10V
-65°C to +150°C
350mW
Storage Temperature
Power Dissipation at 25°C
Power Dissipation at 70°C
Junction Temperature
300mW
+150°C
Lead Temperature
(Soldering, 10s)
300°C
(1) “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be ensured. They are not meant to imply
that the devices should be operated at these limits. The table of “Electrical Characteristics” specifies conditions of device operation.
(2) If Military/Aerospace specified devices are required, please contact the TI Sales Office/Distributors for availability and specifications.
Recommended Operating Conditions
VDD
3V to 10V
Operating Temperature
−40°C to 85°C
Electrical Characteristics
TA within operating range, VDD = 3.0V to 10V, VSS = 0V unless otherwise specified.
Parameter
Supply Voltage, VDD
Conditions
Min
Typ
Max
Units
3
10
V
Average Supply Current, IDD
All Outputs Open, Clock=Gnd,
Data=Gnd,OSC=Gnd, BP_IN @ 32Hz
VDD= 5V
10
40
µA
µA
V
VDD= 10V
Input Logical '0' Voltage, VIL
Input Logical '1' Voltage, VIH
VDD= 3V
0.4
0.8
0.8
VDD= 5V
V
VDD= 10V
V
VDD= 3V
2.0
2.0
8.0
-20
20
V
VDD= 5V
V
VDD= 10V
V
Segment Sink Current, IOL
VDD= 3V, VOUT= 0.3V
VDD= 3V, VOUT= 2.7V
-40
40
µA
µA
µA
Segment Source Current, IOH
Backplane Out Sink Current, IOL VDD= 3V, VOUT= 0.3V
-320
-500
Backplane Out Source Current, VDD= 3V, VOUT= 2.7V
IOH
320
500
µA
(1)
Segment Output Offset Voltage Segment Load = 250pF
+/-50
+/-50
mV
mV
Hz
(1)
Backplane Output Offset Voltage Backplane Load = 8750pF
Backplane Out Frequency
ROSC_IN= 50kΩ, COSC_IN= 0.01µF
75
(2)
(1) (3)
Clock Input Frequency, fCLOCK
VDD= 3V
500
750
1.0
60
kHz
kHz
MHz
%
(1)
VDD= 5V
(1)
VDD= 10V
Clock Input Duty Cycle(2)
Data Input Set-Up Time, tDS
Data Input Hold Time, tDH
DataEnable Set-up Time, tDES
40
300
300
100
ns
ns
ns
(1) This parameter is ensured (but not production tested) over the operating temperature range and the operating supply voltage range. Not
to be used in Q.A. testing.
(2) Clock input rise time (tr) and fall time (tf) must not exceed 300ns
(3) AC input waveform for test purposes: tr≤ 20ns, tf≤ 20ns, fCLOCK= 500kHz, Duty Cycle = 50% ±10%
2
Submit Documentation Feedback
Copyright © 1995–2013, Texas Instruments Incorporated
Product Folder Links: MM5452 MM5453
MM5452, MM5453
www.ti.com
SNLS367C –FEBRUARY 1995–REVISED MARCH 2013
Connection Diagram
Figure 2. Top View
See Package Number NFJ0040A
Figure 3. Top View
See Package Number NFJ0040A
Figure 4. Top View
See Package Number FN0044A
Figure 5. Top View
See Package Number FN0044A
Copyright © 1995–2013, Texas Instruments Incorporated
Submit Documentation Feedback
3
Product Folder Links: MM5452 MM5453
MM5452, MM5453
SNLS367C –FEBRUARY 1995–REVISED MARCH 2013
www.ti.com
FUNCTIONAL DESCRIPTION
The MM5452 is specifically designed to operate 4½-digit 7-segment displays with minimal interface with the
display and the data source. Serial data transfer from the data source to the display driver is accomplished with 2
signals, serial data and clock. Since the MM5452 does not contain a character generator, the formatting of the
segment information must be done prior to inputting the data to the MM5452. Using a format of a leading “1”
followed by the 32 data bits allows data transfer without an additional load signal. The 32 data bits are latched
after the 36th clock is complete, thus providing non-multiplexed, direct drive to the display. Outputs change only if
the serial data bits differ from the previous time.
A block diagram is shown in Figure 1. For the MM5452 a DATA ENABLE is used instead of the 33rd output. If
the DATA ENABLE signal is not required, the 33rd output can be brought out. This is the MM5453 device.
Figure 7 shows the input data format. A start bit of logical “1” precedes the 32 bits of data. At the 36th clock a
LOAD signal is generated synchronously with the high state of the clock, which loads the 32 bits of the shift
registers into the latches. At the low state of the clock a RESET signal is generated which clears all the shift
registers for the next set of data. The shift registers are static master-slave configuration. There is no clear for
the master portion of the first shift register, thus allowing continuous operation.
If the clock is not continuous, there must be at least a complete set of 36 clocks otherwise the shift registers will
not load and clear.
Bit 1 is the first bit following the start bit and it will appear on device pin 18 of the MM5452N and MM5453N, and
on device pin 20 of the MM5452V and MM5453V.
Figure 6 shows the timing relationships between data, clock and DATA ENABLE.
Figure 6. Timing Diagram
Figure 7. Input Data Format
Figure 8 shows a typical application. Note how the input data maps to the output pins and the display. The
MM5452 and MM5453 do not have format restrictions, as all outputs are controllable. The application assumes a
specific display pinout. Different display/driver connection patterns will, of course, yield a different input data
format.
4
Submit Documentation Feedback
Copyright © 1995–2013, Texas Instruments Incorporated
Product Folder Links: MM5452 MM5453
MM5452, MM5453
www.ti.com
SNLS367C –FEBRUARY 1995–REVISED MARCH 2013
Consult LCD manufacturer’s data sheet for specific pinouts.
Figure 8. Typical 4½-Digit Display Application
Copyright © 1995–2013, Texas Instruments Incorporated
Submit Documentation Feedback
5
Product Folder Links: MM5452 MM5453
MM5452, MM5453
SNLS367C –FEBRUARY 1995–REVISED MARCH 2013
www.ti.com
*The minimum recommended value for R for the oscillator input is 9 kΩ. An RC time constant of approximately 4.91 ×
10−4 should produce a backplane frequency between 30 Hz and 150 Hz.
Figure 9. Parallel Backplane Outputs
Figure 10. External Backplane Clock
Figure 11 shows a four wire remote display that takes advantage of the device’s serial input to move many bits of
display information on a few wires.
USING AN EXTERNAL CLOCK
The MM5452/MM5453 LCD Drivers can be used with an externally supplied clock, provided it has a duty cycle of
50%. Deviations from a 50% duty cycle result in an offset voltage on the LCD. In Figure 10, a flip-flop is used to
assure a 50% duty cycle. The oscillator input is grounded to prevent oscillation and reduce current consumptions
in the chips. The oscillator is not used.
Using an external clock allows synchronizing the display drive with AC power, internal clocks, or DVM integration
time to reduce interference from the display.
Figure 12 is a general block diagram that shows how the device’s serial input can be used to advantage in an
analog display. The analog voltage input is compared with a staircase voltage generated by a counter and a
digital-to-analog converter or resistor array. The result of this comparison is clocked into the MM5452, MM5453.
The next clock pulse increments the staircase and clocks the new data in.
6
Submit Documentation Feedback
Copyright © 1995–2013, Texas Instruments Incorporated
Product Folder Links: MM5452 MM5453
MM5452, MM5453
www.ti.com
SNLS367C –FEBRUARY 1995–REVISED MARCH 2013
With a buffer amplifier, the same staircase waveform can be used for many displays. The digital-to-analog
converter need not be linear; logarithmic or other non-linear functions can be displayed by using weighted
resistors or special DACs. This system can be used for status indicators, spectrum analyzers, audio level and
power meters, tuning indicators, and other applications.
Figure 11. Four Wire Remote Display
Data is high until staircase > input
Figure 12. Analog Display
Copyright © 1995–2013, Texas Instruments Incorporated
Submit Documentation Feedback
7
Product Folder Links: MM5452 MM5453
MM5452, MM5453
SNLS367C –FEBRUARY 1995–REVISED MARCH 2013
www.ti.com
REVISION HISTORY
Changes from Revision B (March 2013) to Revision C
Page
•
Changed layout of National Data Sheet to TI format ............................................................................................................ 7
8
Submit Documentation Feedback
Copyright © 1995–2013, Texas Instruments Incorporated
Product Folder Links: MM5452 MM5453
PACKAGE OPTION ADDENDUM
www.ti.com
10-Dec-2020
PACKAGING INFORMATION
Orderable Device
Status Package Type Package Pins Package
Eco Plan
Lead finish/
Ball material
MSL Peak Temp
Op Temp (°C)
Device Marking
Samples
Drawing
Qty
(1)
(2)
(3)
(4/5)
(6)
MM5452V/NOPB
MM5452VX/NOPB
MM5453V/NOPB
MM5453VX/NOPB
ACTIVE
ACTIVE
ACTIVE
ACTIVE
PLCC
PLCC
PLCC
PLCC
FN
FN
FN
FN
44
44
44
44
25
500
25
RoHS & Green
RoHS & Green
RoHS & Green
RoHS & Green
SN
Level-3-245C-168 HR
Level-3-245C-168 HR
Level-3-245C-168 HR
Level-3-245C-168 HR
-40 to 85
-40 to 85
-40 to 85
-40 to 85
MM5452V
SN
SN
SN
MM5452V
MM5453V
MM5453V
500
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance
do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may
reference these types of products as "Pb-Free".
RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.
Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of <=1000ppm threshold. Antimony trioxide based
flame retardants must also meet the <=1000ppm threshold requirement.
(3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.
(5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.
(6)
Lead finish/Ball material - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead finish/Ball material values may wrap to two
lines if the finish value exceeds the maximum column width.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
10-Dec-2020
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com
5-Jan-2022
TUBE
*All dimensions are nominal
Device
Package Name Package Type
Pins
SPQ
L (mm)
W (mm)
T (µm)
B (mm)
MM5452V/NOPB
MM5453V/NOPB
FN
FN
PLCC
PLCC
44
44
25
25
466
466
21
21
8001
8001
15.74
15.74
Pack Materials-Page 1
PACKAGE OUTLINE
FN0044A
PLCC - 4.57 mm max height
SCALE 0.800
PLASTIC CHIP CARRIER
.180 MAX
[4.57]
B
.650-.656
[16.51-16.66]
NOTE 3
.020 MIN
[0.51]
A
(.008)
[0.2]
6
1 44
40
7
39
PIN 1 ID
(OPTIONAL)
.650-.656
[16.51-16.66]
NOTE 3
.582-.638
[14.79-16.20]
17
29
18
28
.090-.120 TYP
[2.29-3.04]
44X .026-.032
[0.66-0.81]
C
SEATING PLANE
.004 [0.1] C
44X .013-.021
[0.33-0.53]
40X .050
[1.27]
.007 [0.18]
C A B
.685-.695
[17.40-17.65]
TYP
4215154/A 04/2017
NOTES:
1. All linear dimensions are in inches. Any dimensions in brackets are in millimeters. Any dimensions in parenthesis are for reference only.
Controlling dimensions are in inches. Dimensioning and tolerancing per ASME Y14.5M.
2. This drawing is subject to change without notice.
3. Dimension does not include mold protrusion. Maximum allowable mold protrusion .01 in [0.25 mm] per side.
4. Reference JEDEC registration MS-018.
www.ti.com
EXAMPLE BOARD LAYOUT
FN0044A
PLCC - 4.57 mm max height
PLASTIC CHIP CARRIER
SYMM
44X (.093 )
[2.35]
44
40
6
1
7
39
44X (.030 )
[0.75]
SYMM
(.64
)
[16.2]
40X (.050 )
[1.27]
29
17
(R.002 ) TYP
[0.05]
18
28
(.64
)
[16.2]
LAND PATTERN EXAMPLE
EXPOSED METAL SHOWN
SCALE:4X
.002 MIN
[0.05]
ALL AROUND
.002 MAX
[0.05]
ALL AROUND
EXPOSED METAL
EXPOSED METAL
METAL UNDER
SOLDER MASK
SOLDER MASK
OPENING
METAL
SOLDER MASK
OPENING
NON SOLDER MASK
DEFINED
SOLDER MASK
DEFINED
(PREFERRED)
SOLDER MASK DETAILS
4215154/A 04/2017
NOTES: (continued)
5. Publication IPC-7351 may have alternate designs.
6. Solder mask tolerances between and around signal pads can vary based on board fabrication site.
www.ti.com
EXAMPLE STENCIL DESIGN
FN0044A
PLCC - 4.57 mm max height
PLASTIC CHIP CARRIER
SYMM
44X (.093 )
[2.35]
6
44
40
1
7
39
44X (.030 )
[0.75]
SYMM
(.64
)
[16.2]
40X (.050 )
[1.27]
29
17
(R.002 ) TYP
[0.05]
18
28
(.64
)
[16.2]
SOLDER PASTE EXAMPLE
BASED ON 0.125 mm THICK STENCIL
SCALE:4X
4215154/A 04/2017
NOTES: (continued)
7. Laser cutting apertures with trapezoidal walls and rounded corners may offer better paste release. IPC-7525 may have alternate
design recommendations.
8. Board assembly site may have different recommendations for stencil design.
www.ti.com
IMPORTANT NOTICE AND DISCLAIMER
TI PROVIDES TECHNICAL AND RELIABILITY DATA (INCLUDING DATA SHEETS), DESIGN RESOURCES (INCLUDING REFERENCE
DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS”
AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY
IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD
PARTY INTELLECTUAL PROPERTY RIGHTS.
These resources are intended for skilled developers designing with TI products. You are solely responsible for (1) selecting the appropriate
TI products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable
standards, and any other safety, security, regulatory or other requirements.
These resources are subject to change without notice. TI grants you permission to use these resources only for development of an
application that uses the TI products described in the resource. Other reproduction and display of these resources is prohibited. No license
is granted to any other TI intellectual property right or to any third party intellectual property right. TI disclaims responsibility for, and you
will fully indemnify TI and its representatives against, any claims, damages, costs, losses, and liabilities arising out of your use of these
resources.
TI’s products are provided subject to TI’s Terms of Sale or other applicable terms available either on ti.com or provided in conjunction with
such TI products. TI’s provision of these resources does not expand or otherwise alter TI’s applicable warranties or warranty disclaimers for
TI products.
TI objects to and rejects any additional or different terms you may have proposed. IMPORTANT NOTICE
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2022, Texas Instruments Incorporated
相关型号:
©2020 ICPDF网 联系我们和版权申明