OPA2244PAG4 [TI]
MicroPower Single-Supply Operational Amplifier MicroAmplifier™ Series 8-PDIP;
| 型号： | OPA2244PAG4 |
| 厂家： | 
TEXAS INSTRUMENTS |
| 描述： | MicroPower Single-Supply Operational Amplifier MicroAmplifier™ Series 8-PDIP 放大器 光电二极管 |
| 文件： | 总21页 (文件大小：659K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
®
OPA244
OPA2244
OPA244
OPA2244
OPA4244
OPA244
®
OPA4244
OPA2244
MicroPower, Single-Supply
OPERATIONAL AMPLIFIERS
™
MicroAmplifier Series
FEATURES
DESCRIPTION
The OPA244 (single), OPA2244 (dual), and OPA4244 (quad)
op amps are designed for very low quiescent current
(50µA/channel), yet achieve excellent bandwidth. Ideal for
battery powered and portable instrumentation, all versions are
offered in micro packages for space-limited applications.
The dual and quad versions feature completely independent
circuitry for lowest crosstalk and freedom from interaction, even
when overdriven or overloaded.
● MicroSIZE PACKAGES
OPA244 (Single): SOT-23-5
OPA2244 (Dual): MSOP-8
OPA4244 (Quad): TSSOP-14
● MicroPOWER: IQ = 50µA/channel
● SINGLE SUPPLY OPERATION
● WIDE BANDWIDTH: 430kHz
The OPA244 series is easy to use and free from phase
inversion and overload problems found in some other op amps.
These amplifiers are stable in unity gain and excellent perfor-
mance is maintained as they swing to their specified limits.
They can be operated from single (+2.2V to +36V) or dual
supplies (±1.1V to ±18V). The input common-mode voltage
range includes ground—ideal for many single supply applica-
tions. All versions have similar performance. However, there
are some differences, such as common-mode rejection. All
versions are interchangeable in most applications.
● WIDE SUPPLY RANGE:
Single Supply: 2.2V to 36V
Dual Supply: ±1.1V to ±18V
APPLICATIONS
● BATTERY POWERED SYSTEMS
● PORTABLE EQUIPMENT
● PCMCIA CARDS
All versions are offered in miniature, surface-mount packages.
OPA244 (single version) comes in the tiny 5-lead SOT-23-5
surface mount, SO-8 surface mount, and 8-pin DIP. OPA2244
(dual version) is available in the MSOP-8 surface mount,
SO-8 surface-mount, and 8-pin DIP. The OPA4244 (quad)
comes in the TSSOP-14 surface mount. They are fully specified
from –40°C to +85°C and operate from –55°C to +125°C.
A SPICE Macromodel is available for design analysis.
● BATTERY PACKS AND POWER SUPPLIES
● CONSUMER PRODUCTS
OPA244
Out
V–
1
2
3
5
4
V+
+In
–In
OPA4244
SOT-23-5
Output A
–Input A
+Input A
+V
1
2
3
4
5
6
7
14 Output D
13 –Input D
12 +Input D
11 –V
OPA2244
OPA244
NC
NC
–In
+In
V–
1
2
3
4
8
Out A
1
8
7
6
5
V+
A
V+
7
6
5
–In A
+In A
V–
2
3
4
Out B
–In B
+In B
+Input B
–Input B
Output B
10 +Input C
B
Output
NC
9
8
–Input C
Output C
8-Pin DIP, SO-8
8-Pin DIP, SO-8, MSOP-8
TSSOP-14
International Airport Industrial Park • Mailing Address: PO Box 11400, Tucson, AZ 85734 • Street Address: 6730 S. Tucson Blvd., Tucson, AZ 85706 • Tel: (520) 746-1111
Twx: 910-952-1111 • Internet: http://www.burr-brown.com/ • Cable: BBRCORP • Telex: 066-6491 • FAX: (520) 889-1510 • Immediate Product Info: (800) 548-6132
© 1999 Burr-Brown Corporation
PDS-1437C
Printed in U.S.A. December, 1999
SBOS088
SPECIFICATIONS: VS = +2.6V to +36V
Boldface limits apply over the specified temperature range, TA = –40°C to +85°C
At TA = +25°C, RL = 20kΩ connected to ground, unless otherwise noted.
OPA244NA, PA, UA
PARAMETER
CONDITION
MIN
TYP(1)
MAX
UNITS
OFFSET VOLTAGE
Input Offset Voltage
TA = –40°C to 85°C
vs Temperature
vs Power Supply
TA = –40°C to 85°C
VOS
VS = ±7.5V, VCM = 0
±0.7
±1.5
±2
mV
mV
µV/°C
µV/V
µV/V
dVOS/dT
PSRR
TA = –40°C to 85°C
VS = +2.6V to +36V
VS = +2.6V to +36V
±4
5
50
50
INPUT BIAS CURRENT
Input Bias Current
Input Offset Current
IB
IOS
VCM = VS/2
VCM = VS/2
–10
±1
–25
±10
nA
nA
NOISE
Input Voltage Noise, f = 0.1kHz to 10kHz
Input Voltage Noise Density, f = 1kHz
Current Noise Density, f = 1kHz
0.4
22
40
µVp-p
nV/√Hz
fA/√Hz
en
in
INPUT VOLTAGE RANGE
Common-Mode Voltage Range
VCM
0
(V+) – 0.9
V
Common-Mode Rejection
TA = –40°C to 85°C
CMRR
VS = ±18V, VCM = –18V to +17.1V
VS = ±18V, VCM = –18V to +17.1V
84
84
98
dB
dB
INPUT IMPEDANCE
Differential
Common-Mode
106 || 2
109 || 2
Ω || pF
Ω || pF
OPEN-LOOP GAIN
Open-Loop Voltage Gain
TA = –40°C to 85°C
AOL
VO = 0.5V to (V+) – 0.9
VO = 0.5V to (V+) – 0.9
86
86
106
dB
dB
FREQUENCY RESPONSE
Gain-Bandwidth Product
Slew Rate
Settling Time 0.01%
Overload Recovery Time
GBW
SR
430
–0.1/+0.16
150
kHz
V/µs
µs
G = 1
10V Step
VIN • Gain = VS
8
µs
OUTPUT
Voltage Output, Positive
TA = –40°C to 85°C
Voltage Output, Negative
TA = –40°C to 85°C
Voltage Output, Positive
TA = –40°C to 85°C
Voltage Output, Negative
TA = –40°C to 85°C
Short-Circuit Current
Capacitive Load Drive
VO
A
A
A
A
OL ≥ 80dB, RL = 20kΩ to VS/2
OL ≥ 80dB, RL = 20kΩ to VS/2
OL ≥ 80dB, RL = 20kΩ to VS/2
OL ≥ 80dB, RL = 20kΩ to VS/2
(V+) – 0.9
(V+) – 0.9
0.5
(V+) – 0.75
(V+) – 0.75
0.2
V
V
V
V
V
V
V
V
mA
0.5
0.2
A
A
A
A
OL ≥ 80dB, RL = 20kΩ to Ground
OL ≥ 80dB, RL = 20kΩ to Ground
OL ≥ 80dB, RL = 20kΩ to Ground
OL ≥ 80dB, RL = 20kΩ to Ground
(V+) – 0.75
(V+) – 0.75
0.1
0.1
ISC
CLOAD
–25/+12
See Typical Curve
POWER SUPPLY
Specified Voltage Range
Minimum Operating Voltage
Quiescent Current
VS
IQ
TA = –40°C to 85°C
+2.6
+36
V
V
µA
µA
+2.2
50
IO = 0
IO = 0
60
70
TA = –40°C to 85°C
TEMPERATURE RANGE
Specified Range
Operating Range
Storage Range
–40
–55
–65
85
125
150
°C
°C
°C
Thermal Resistance
SOT-23-5 Surface-Mount
SO-8 Surface-Mount
8-Pin DIP
θJA
200
150
100
°C/W
°C/W
°C/W
NOTE: (1) VS = +15V.
The information provided herein is believed to be reliable; however, BURR-BROWN assumes no responsibility for inaccuracies or omissions. BURR-BROWN assumes
no responsibility for the use of this information, and all use of such information shall be entirely at the user’s own risk. Prices and specifications are subject to change
without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. BURR-BROWN does not authorize or warrant
any BURR-BROWN product for use in life support devices and/or systems.
®
2
OPA244, 2244, 4244
SPECIFICATIONS: VS = +2.6V to +36V
Boldface limits apply over the specified temperature range, TA = –40°C to +85°C
At TA = +25°C, RL = 20kΩ connected to ground, unless otherwise noted.
OPA2244EA, PA, UA
PARAMETER
CONDITION
MIN
TYP(1)
MAX
UNITS
OFFSET VOLTAGE
Input Offset Voltage
TA = –40°C to 85°C
vs Temperature
vs Power Supply
TA = –40°C to 85°C
Channel Separation
VOS
VS = ±7.5V, VCM = 0
±0.7
±1.5
±2
mV
mV
µV/°C
µV/V
µV/V
dB
dVOS/dT
PSRR
TA = –40°C to 85°C
VS = +2.6V to +36V
VS = +2.6V to +36V
±4
5
50
50
140
INPUT BIAS CURRENT
Input Bias Current
Input Offset Current
IB
IOS
VCM = VS/2
VCM = VS/2
–10
±1
–25
±10
nA
nA
NOISE
Input Voltage Noise, f = 0.1kHz to 10kHz
Input Voltage Noise Density, f = 1kHz
Current Noise Density, f = 1kHz
0.4
22
40
µVp-p
nV/√Hz
fA/√Hz
en
in
INPUT VOLTAGE RANGE
Common-Mode Voltage Range
VCM
0
(V+) – 0.9
V
Common-Mode Rejection
TA = –40°C to 85°C
CMRR
VS = ±18V, VCM = –18V to +17.1V
VS = ±18V, VCM = –18V to +17.1V
72
72
98
dB
dB
INPUT IMPEDANCE
Differential
Common-Mode
106 || 2
109 || 2
Ω || pF
Ω || pF
OPEN-LOOP GAIN
Open-Loop Voltage Gain
TA = –40°C to 85°C
AOL
VO = 0.5V to (V+) – 0.9
VO = 0.5V to (V+) – 0.9
86
86
106
dB
dB
FREQUENCY RESPONSE
Gain-Bandwidth Product
Slew Rate
Settling Time 0.01%
Overload Recovery Time
GBW
SR
430
–0.1/+0.16
150
kHz
V/µs
µs
G = 1
10V Step
VIN • Gain = VS
8
µs
OUTPUT
Voltage Output, Positive
TA = –40°C to 85°C
Voltage Output, Negative
TA = –40°C to 85°C
Voltage Output, Positive
TA = –40°C to 85°C
Voltage Output, Negative
TA = –40°C to 85°C
Short-Circuit Current
Capacitive Load Drive
VO
A
A
A
A
OL ≥ 80dB, RL = 20kΩ to VS/2
OL ≥ 80dB, RL = 20kΩ to VS/2
OL ≥ 80dB, RL = 20kΩ to VS/2
OL ≥ 80dB, RL = 20kΩ to VS/2
(V+) – 0.9
(V+) – 0.9
0.5
(V+) – 0.75
(V+) – 0.75
0.2
V
V
V
V
V
V
V
V
mA
0.5
0.2
AOL ≥ 80dB, RL = 20kΩ to Ground
AOL ≥ 80dB, RL = 20kΩ to Ground
AOL ≥ 80dB, RL = 20kΩ to Ground
AOL ≥ 80dB, RL = 20kΩ to Ground
(V+) – 0.75
(V+) – 0.75
0.1
0.1
ISC
CLOAD
–25/+12
See Typical Curve
POWER SUPPLY
Specified Voltage Range
Minimum Operating Voltage
Quiescent Current (per amplifier)
TA = –40°C to 85°C
VS
IQ
TA = –40°C to 85°C
+2.6
+36
V
V
µA
µA
+2.2
40
IO = 0
IO = 0
50
63
TEMPERATURE RANGE
Specified Range
Operating Range
Storage Range
–40
–55
–65
85
125
150
°C
°C
°C
Thermal Resistance
MSOP-8 Surface-Mount
SO-8 Surface-Mount
8-Pin DIP
θJA
200
150
100
°C/W
°C/W
°C/W
NOTE: (1) VS = +15V.
®
3
OPA244, 2244, 4244
SPECIFICATIONS: VS = +2.6V to +36V
Boldface limits apply over the specified temperature range, TA = –40°C to +85°C
At TA = +25°C, RL = 20kΩ connected to ground, unless otherwise noted.
OPA4244EA
PARAMETER
CONDITION
MIN
TYP(1)
MAX
UNITS
OFFSET VOLTAGE
Input Offset Voltage
TA = –40°C to 85°C
vs Temperature
vs Power Supply
TA = –40°C to 85°C
Channel Separation
VOS
VS = ±7.5V, VCM = 0
±0.7
±1.5
±2
mV
mV
µV/°C
µV/V
µV/V
dB
dVOS/dT
PSRR
TA = –40°C to 85°C
VS = +2.6V to +36V
VS = +2.6V to +36V
±4
5
50
50
140
INPUT BIAS CURRENT
Input Bias Current
Input Offset Current
IB
IOS
VCM = VS/2
VCM = VS/2
–10
±1
–25
±10
nA
nA
NOISE
Input Voltage Noise, f = 0.1kHz to 10kHz
Input Voltage Noise Density, f = 1kHz
Current Noise Density, f = 1kHz
0.4
22
40
µVp-p
nV/√Hz
fA/√Hz
en
in
INPUT VOLTAGE RANGE
Common-Mode Voltage Range
VCM
0
(V+) – 0.9
V
Common-Mode Rejection
TA = –40°C to 85°C
CMRR
VS = ±18V, VCM = –18V to +17.1V
VS = ±18V, VCM = –18V to +17.1V
82
82
104
dB
dB
INPUT IMPEDANCE
Differential
Common-Mode
106 || 2
109 || 2
Ω || pF
Ω || pF
OPEN-LOOP GAIN
Open-Loop Voltage Gain
TA = –40°C to 85°C
AOL
VO = 0.5V to (V+) – 0.9
VO = 0.5V to (V+) – 0.9
86
86
106
dB
dB
FREQUENCY RESPONSE
Gain-Bandwidth Product
Slew Rate
Settling Time 0.01%
Overload Recovery Time
GBW
SR
430
–0.1/+0.16
150
kHz
V/µs
µs
G = 1
10V Step
VIN • Gain = VS
8
µs
OUTPUT
Voltage Output, Positive
TA = –40°C to 85°C
Voltage Output, Negative
TA = –40°C to 85°C
Voltage Output, Positive
TA = –40°C to 85°C
Voltage Output, Negative
TA = –40°C to 85°C
Short-Circuit Current
Capacitive Load Drive
VO
A
A
A
A
OL ≥ 80dB, RL = 20kΩ to VS/2
OL ≥ 80dB, RL = 20kΩ to VS/2
OL ≥ 80dB, RL = 20kΩ to VS/2
OL ≥ 80dB, RL = 20kΩ to VS/2
(V+) – 0.9
(V+) – 0.9
0.5
(V+) – 0.75
(V+) – 0.75
0.2
V
V
V
V
V
V
V
V
mA
0.5
0.2
AOL ≥ 80dB, RL = 20kΩ to Ground
AOL ≥ 80dB, RL = 20kΩ to Ground
AOL ≥ 80dB, RL = 20kΩ to Ground
AOL ≥ 80dB, RL = 20kΩ to Ground
(V+) – 0.75
(V+) – 0.75
0.1
0.1
ISC
CLOAD
–25/+12
See Typical Curve
POWER SUPPLY
Specified Voltage Range
Minimum Operating Voltage
Quiescent Current (per amplifier)
TA = –40°C to 85°C
VS
IQ
TA = –40°C to 85°C
+2.6
+36
V
V
µA
µA
+2.2
40
IO = 0
IO = 0
60
70
TEMPERATURE RANGE
Specified Range
Operating Range
–40
–55
–65
85
125
150
°C
°C
°C
Storage Range
Thermal Resistance
TSSOP-14 Surface Mount
θJA
100
°C/W
NOTE: (1) VS = +15V.
®
4
OPA244, 2244, 4244
ABSOLUTE MAXIMUM RATINGS(1)
ELECTROSTATIC
DISCHARGE SENSITIVITY
This integrated circuit can be damaged by ESD. Burr-Brown
recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling
and installation procedures can cause damage.
Supply Voltage, V+ to V– .................................................................... 36V
Input Voltage Range(2) ................................... (V–) – 0.3V to (V+) + 0.3V
Input Current(2) ................................................................................. 10mA
Output Short-Circuit(3) .............................................................. Continuous
Operating Temperature .................................................. –55°C to +125°C
Storage Temperature .....................................................–65°C to +150°C
Junction Temperature ...................................................................... 150°C
Lead Temperature (soldering, 10s)................................................. 300°C
ESD Capability ................................................................................ 2000V
ESD damage can range from subtle performance degrada-
tion to complete device failure. Precision integrated circuits
may be more susceptible to damage because very small
parametric changes could cause the device not to meet its
published specifications.
NOTES: (1) Stresses above these ratings may cause permanent damage.
Exposure to absolute maximum conditions for extended periods may de-
grade device reliability. (2) Inputs are diode-clamped to the supply rails and
should be current-limited to 10mA or less if input voltages can exceed rails
by more than 0.3V. (3) Short-circuit to ground, one amplifier per package.
PACKAGE/ORDERING INFORMATION
PACKAGE
DRAWING
NUMBER
SPECIFIED
TEMPERATURE
RANGE
PACKAGE
MARKING
ORDERING
NUMBER(1)
TRANSPORT
MEDIA
PRODUCT
PACKAGE
Single
OPA244NA
SOT-23-5 Surface-Mount
331
"
006
182
"
–40°C to +85°C
A44
"
OPA244PA
OPA244UA
"
OPA244NA/250
OPA244NA/3K
OPA244PA
OPA244UA
OPA244UA/2K5
Tape and Reel
Tape and Reel
Rails
Rails
Tape and Reel
"
OPA244PA
OPA244UA
"
"
"
8-Pin DIP
–40°C to +85°C
–40°C to +85°C
"
SO-8 Surface-Mount
"
Dual
OPA2244EA
MSOP-8 Surface-Mount
337
"
006
182
"
–40°C to +85°C
A44
"
OPA2244PA
OPA2244UA
"
OPA2244EA/250
OPA2244EA/2K5
OPA2244PA
OPA2244UA
OPA2244UA/2K5
Tape and Reel
Tape and Reel
Rails
Rails
Tape and Reel
"
"
"
OPA2244PA
OPA2244UA
"
8-Pin DIP
–40°C to +85°C
–40°C to +85°C
"
SO-8 Surface-Mount
"
Quad
OPA4244EA
TSSOP-14 Surface-Mount
357
"
–40°C to +85°C
OPA4244EA
OPA4244EA/250
OPA4244EA/2K5
Tape and Reel
Tape and Reel
"
"
"
"
NOTE: (1) Products followed by a slash (/) are only available in Tape and Reel in the quantities indicated (e.g., /250 indicates 250 devices per reel). Ordering 3000
pieces of “OPA244NA/3K” will get a single 3000 piece Tape and Reel.
®
5
OPA244, 2244, 4244
TYPICAL PERFORMANCE CURVES
At TA = 25°C, VS = +15V, and RL = 20kΩ connected to Ground, unless otherwise noted.
CHANNEL SEPARATION
OPEN-LOOP GAIN AND PHASE vs FREQUENCY
160
150
140
130
120
110
100
90
180
160
140
120
100
80
0
–20
All Models
–40
–60
Phase
–80
OPA244
OPA2244
–100
–120
–140
–160
–180
–200
OPA4244
60
Gain
40
20
80
0
70
–20
60
1
10
100
1k
Frequency (Hz)
10k
100k
1M
1
10
100
1k
10k
100k
Frequency (Hz)
POWER SUPPLY AND COMMON-MODE REJECTION vs FREQUENCY
110
100
90
120
OPA4244
110
100
90
OPA244
80
OPA2244
80
70
60
50
40
30
CMRR
CMRR
70
60
50
PSRR
40
PSRR
30
1
10
100
1k
Frequency (Hz)
10k
100k
1M
10
100
1k
10k
100k
1M
Frequency (Hz)
OPEN-LOOP GAIN vs LOAD RESISTANCE
VO = ±5V
OUTPUT VOLTAGE SWING vs OUTPUT CURRENT
RL to VS/2
15
14
13
12
11
10
120
110
100
90
25°C
125°C
–55°C
–10
–11
–12
–13
–14
–15
–55°C
125°C
80
70
25°C
60
1
10
100
0
±2
±4
±6
±8
±10
±12
±14
Load (kΩ)
Output Current (mA)
®
6
OPA244, 2244, 4244
TYPICAL PERFORMANCE CURVES (Cont.)
At TA = 25°C, VS = +15V, and RL = 20kΩ connected to Ground, unless otherwise noted.
INPUT BIAS CURRENT
vs INPUT COMMON-MODE VOLTAGE
INPUT BIAS CURRENT vs TEMPERATURE
–12
–10
–8
–12
–11
–10
–9
–IB
+IB
–8
–6
–7
–4
–6
–2
–5
–15
–75
0
–10
–5
0
5
10
15
125
36
–75
–50
–25
0
25
50
75
100
125
Common-Mode Voltage (V)
Temperature (°C)
AOL, CMRR, PSRR vs TEMPERATURE
SLEW RATE vs TEMPERATURE
+SR
0.20
0.18
0.16
0.14
0.12
0.10
0.08
0.06
0.04
0.02
0.00
125
120
115
110
105
100
95
PSRR
CMRR
–SR
VS = ±7.5, RL = 20kΩ,
CL = 100pF, Gain = +1
AOL
90
85
80
–75
–25
75
125
175
25
–50
–25
0
25
50
75
100
Temperature(°C)
Temperature (°C)
COMMON-MODE REJECTION
vs SUPPY VOLTAGE
QUIESCENT CURRENT AND SHORT-CIRCUIT
vs SUPPLY VOLTAGE
120
100
80
60
40
20
0
52
48
44
40
36
32
28
24
35
30
25
20
15
10
5
IQ
–ISC
+ISC
0
4
8
12
16
20
24
28
32
0
4
8
12
16
20
24
28
32
36
Suppy Voltage (V)
Supply Voltage (V)
®
7
OPA244, 2244, 4244
TYPICAL PERFORMANCE CURVES (Cont.)
At TA = 25°C, VS = +15V, and RL = 20kΩ connected to Ground, unless otherwise noted.
QUIESCENT AND SHORT-CIRCUIT CURRENT vs TEMPERATURE
65
60
55
50
45
40
35
30
25
±40
60
55
50
45
40
35
30
20
–30
–25
–20
–15
+15
+10
+5
OPA244
OPA4244
±35
±30
±25
±20
±15
±10
±5
OPA2244
–ISC
–ISC
IQ
IQ
+ISC
+ISC
0
0
–75
–50
–25
0
25
50
75
100
125
–75
–50
–25
0
25
50
75
100
125
Temperature (°C)
Temperature (°C)
INPUT VOLTAGE AND CURRENT NOISE
SPECTRAL DENSITY vs FREQUENCY
MAXIMUM OUTPUT VOLTAGE vs FREQUENCY
VS = 36V
1000
100
10
1000
100
10
40
35
30
25
20
15
10
5
Current Noise
VS =15V
Voltage Noise
VS = 2.7V
1
1
0
1
10
100
1k
10k
100k
100
1k
10k
100k
1M
Frequency(Hz)
Frequency (Hz)
SMALL SIGNAL OVERSHOOT vs LOAD CAPACITANCE
60
50
40
30
20
10
0
70%
OPA4244
OPA244
OPA2244
60%
G = +1
G = –2
50%
40%
30%
20%
10%
0%
G = –1
G = +1, RL = ∞
G = +3
G = +1, RL = 20kΩ
G = +2, RL = 20kΩ
G = +3, RL = 20kΩ
10
100
1k
10k
100
1k
10k
Load Capacitance (pF)
Load Capacitance (pF)
®
8
OPA244, 2244, 4244
TYPICAL PERFORMANCE CURVES (Cont.)
At TA = 25°C, VS = +15V, and RL = 20kΩ connected to Ground, unless otherwise noted.
LARGE-SIGNAL STEP RESPONSE, G = 1, CL = 100pF
OPA244
OPA4244
OPA2244
50µs/div
25µs/div
SMALL-SIGNAL STEP RESPONSE, G = 1, CL = 100pF
OPA244
OPA4244
OPA2244
10µs/div
10µs/div
OFFSET VOLTAGE PRODUCTION DISTRIBUTION
12
10
8
30
25
20
15
10
5
OPA244
OPA4244
OPA2244
6
4
2
0
0
Offset Voltage (µV)
Offset Voltage (µV)
®
9
OPA244, 2244, 4244
TYPICAL PERFORMANCE CURVES (Cont.)
At TA = 25°C, VS = +15V, and RL = 20kΩ connected to Ground, unless otherwise noted.
OFFSET VOLTAGE PRODUCTION DISTRIBUTION
35
30
25
20
15
10
5
70
60
50
40
30
20
10
0
OPA244
OPA4244
OPA2244
0
0
1
2
3
4
5
6
7
8
9
10
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5 5.0 5.5
VOS Drift (µV/°C)
VOS Drift (µV/°C)
®
10
OPA244, 2244, 4244
This allows a designer to have the same assured perfor-
mance at any supply voltage within this range. In addition,
many key parameters are guaranteed over the specified
temperature range, –40°C to +85°C. Most behavior remains
unchanged throughout the full operating voltage range. Pa-
rameters which vary significantly with operating voltage or
temperature are shown in typical performance curves.
APPLICATIONS INFORMATION
The OPA244 is unity-gain stable and suitable for a wide
range of general purpose applications. Power supply pins
should be bypassed with 0.01µF ceramic capacitors.
OPERATING VOLTAGE
The OPA244 can operate from single supply (+2.2V to
+36V) or dual supplies (±1.1 to ±18V) with excellent
performance. Unlike most op amps which are specified at
only one supply voltage, the OPA244 is specified for real
world applications; a single set of specifications applies
throughout the +2.6V to +36V (±1.3 to ±18V) supply range.
Useful information on solder pad design for printed circuit
boards can be found in Burr-Brown's Application Bulletin
AB-132B, “Solder Pad Recommendations for Surface-
Mount Devices,” easily found at Burr-Brown's web site
(http://www.burr-brown.com).
RH
10Ω
To Load
R5
383kΩ
IH
R3
38.3kΩ
High-Side
Current Sense
R1
V+
38.3kΩ
–In
+In
Out
A1
OPA244
VO = 10 • IH • RH
V+ for A1, A2
V–
R4
20kΩ
R2
19.1kΩ
+
R
2 and R4 divide down the
2.2V to 36V
(±1.1V to ±18V)
R8
100kΩ
common-mode input to A1.
V– for A1, A2
V+
–In
A2
OPA244
Out
VO = 10 • IL • RL
+In
Low-Side
Current Sense
V–
R7
9.09kΩ
Common-mode range of A2
extends to V– for low-side sensing.
R6
10kΩ
RL
10Ω
Optional for IB Cancellation
(R7 = R6 II R8)
To Load
IL
NOTE: Low and high-side sensing circuits can be used independently.
FIGURE 1. Low and High-Side Battery Current Sensing.
®
11
OPA244, 2244, 4244
PACKAGE OPTION ADDENDUM
www.ti.com
7-Jul-2009
PACKAGING INFORMATION
Orderable Device
OPA2244EA/250
OPA2244EA/250G4
OPA2244EA/2K5
OPA2244EA/2K5G4
OPA2244PA
Status (1)
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
Package Package
Pins Package Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
Qty
Type
Drawing
MSOP
DGK
8
250 Green (RoHS & CU NIPDAU Level-2-260C-1 YEAR
no Sb/Br)
MSOP
MSOP
MSOP
PDIP
DGK
DGK
DGK
P
8
250 Green (RoHS & CU NIPDAU Level-2-260C-1 YEAR
no Sb/Br)
8
2500 Green (RoHS & CU NIPDAU Level-2-260C-1 YEAR
no Sb/Br)
8
2500 Green (RoHS & CU NIPDAU Level-2-260C-1 YEAR
no Sb/Br)
8
50 Green (RoHS & CU NIPDAU N / A for Pkg Type
no Sb/Br)
OPA2244PAG4
OPA2244UA
PDIP
P
8
50 Green (RoHS & CU NIPDAU N / A for Pkg Type
no Sb/Br)
SOIC
D
8
75 Green (RoHS & CU NIPDAU Level-3-260C-168 HR
no Sb/Br)
OPA2244UA/2K5
OPA2244UA/2K5G4
OPA2244UAG4
OPA244NA/250
OPA244NA/250G4
OPA244NA/3K
SOIC
D
8
2500 Green (RoHS & CU NIPDAU Level-3-260C-168 HR
no Sb/Br)
SOIC
D
8
2500 Green (RoHS & CU NIPDAU Level-3-260C-168 HR
no Sb/Br)
SOIC
D
8
75 Green (RoHS & CU NIPDAU Level-3-260C-168 HR
no Sb/Br)
SOT-23
SOT-23
SOT-23
SOT-23
PDIP
DBV
DBV
DBV
DBV
P
5
250 Green (RoHS & CU NIPDAU Level-2-260C-1 YEAR
no Sb/Br)
5
250 Green (RoHS & CU NIPDAU Level-2-260C-1 YEAR
no Sb/Br)
5
3000 Green (RoHS & CU NIPDAU Level-2-260C-1 YEAR
no Sb/Br)
OPA244NA/3KG4
OPA244PA
5
3000 Green (RoHS & CU NIPDAU Level-2-260C-1 YEAR
no Sb/Br)
8
50 Green (RoHS & CU NIPDAU N / A for Pkg Type
no Sb/Br)
OPA244PAG4
PDIP
P
8
50 Green (RoHS & CU NIPDAU N / A for Pkg Type
no Sb/Br)
OPA244UA
SOIC
D
8
75 Green (RoHS & CU NIPDAU Level-3-260C-168 HR
no Sb/Br)
OPA244UA/2K5
OPA244UA/2K5E4
OPA244UAE4
SOIC
D
8
2500 Green (RoHS & CU NIPDAU Level-3-260C-168 HR
no Sb/Br)
SOIC
D
8
2500 Green (RoHS & CU NIPDAU Level-3-260C-168 HR
no Sb/Br)
SOIC
D
8
75 Green (RoHS & CU NIPDAU Level-3-260C-168 HR
no Sb/Br)
OPA4244EA/250
OPA4244EA/250E4
OPA4244EA/2K5
OPA4244EA/2K5E4
TSSOP
TSSOP
TSSOP
TSSOP
PW
PW
PW
PW
14
14
14
14
250 Green (RoHS & CU NIPDAU Level-3-260C-168 HR
no Sb/Br)
250 Green (RoHS & CU NIPDAU Level-3-260C-168 HR
no Sb/Br)
2500 Green (RoHS & CU NIPDAU Level-3-260C-168 HR
no Sb/Br)
2500 Green (RoHS & CU NIPDAU Level-3-260C-168 HR
no Sb/Br)
(1) The marketing status values are defined as follows:
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
7-Jul-2009
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com
7-Jul-2009
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0 (mm)
B0 (mm)
K0 (mm)
P1
W
Pin1
Diameter Width
(mm) W1 (mm)
(mm) (mm) Quadrant
OPA2244EA/250
OPA2244EA/2K5
OPA2244UA/2K5
OPA244NA/250
OPA244NA/3K
MSOP
MSOP
SOIC
DGK
DGK
D
8
8
250
2500
2500
250
180.0
330.0
330.0
180.0
180.0
330.0
180.0
330.0
12.4
12.4
12.4
8.4
5.3
5.3
6.4
3.2
3.2
6.4
7.0
7.0
3.4
3.4
5.2
3.1
3.1
5.2
5.6
5.6
1.4
1.4
8.0
8.0
8.0
4.0
4.0
8.0
8.0
8.0
12.0
12.0
12.0
8.0
Q1
Q1
Q1
Q3
Q3
Q1
Q1
Q1
8
2.1
SOT-23
SOT-23
SOIC
DBV
DBV
D
5
1.39
1.39
2.1
5
3000
2500
250
8.4
8.0
OPA244UA/2K5
OPA4244EA/250
OPA4244EA/2K5
8
12.4
12.4
12.4
12.0
12.0
12.0
TSSOP
TSSOP
PW
PW
14
14
1.6
2500
1.6
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
7-Jul-2009
*All dimensions are nominal
Device
Package Type Package Drawing Pins
SPQ
Length (mm) Width (mm) Height (mm)
OPA2244EA/250
OPA2244EA/2K5
OPA2244UA/2K5
OPA244NA/250
OPA244NA/3K
MSOP
MSOP
SOIC
DGK
DGK
D
8
8
250
2500
2500
250
190.5
346.0
346.0
190.5
190.5
346.0
190.5
346.0
212.7
346.0
346.0
212.7
212.7
346.0
212.7
346.0
31.8
29.0
29.0
31.8
31.8
29.0
31.8
29.0
8
SOT-23
SOT-23
SOIC
DBV
DBV
D
5
5
3000
2500
250
OPA244UA/2K5
OPA4244EA/250
OPA4244EA/2K5
8
TSSOP
TSSOP
PW
PW
14
14
2500
Pack Materials-Page 2
MECHANICAL DATA
MTSS001C – JANUARY 1995 – REVISED FEBRUARY 1999
PW (R-PDSO-G**)
PLASTIC SMALL-OUTLINE PACKAGE
14 PINS SHOWN
0,30
0,19
M
0,10
0,65
14
8
0,15 NOM
4,50
4,30
6,60
6,20
Gage Plane
0,25
1
7
0°–8°
A
0,75
0,50
Seating Plane
0,10
0,15
0,05
1,20 MAX
PINS **
8
14
16
20
24
28
DIM
3,10
2,90
5,10
4,90
5,10
4,90
6,60
6,40
7,90
9,80
9,60
A MAX
A MIN
7,70
4040064/F 01/97
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion not to exceed 0,15.
D. Falls within JEDEC MO-153
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MECHANICAL DATA
MPDI001A – JANUARY 1995 – REVISED JUNE 1999
P (R-PDIP-T8)
PLASTIC DUAL-IN-LINE
0.400 (10,60)
0.355 (9,02)
8
5
0.260 (6,60)
0.240 (6,10)
1
4
0.070 (1,78) MAX
0.325 (8,26)
0.300 (7,62)
0.020 (0,51) MIN
0.015 (0,38)
Gage Plane
0.200 (5,08) MAX
Seating Plane
0.010 (0,25) NOM
0.125 (3,18) MIN
0.100 (2,54)
0.021 (0,53)
0.430 (10,92)
MAX
0.010 (0,25)
M
0.015 (0,38)
4040082/D 05/98
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. Falls within JEDEC MS-001
For the latest package information, go to http://www.ti.com/sc/docs/package/pkg_info.htm
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Amplifiers
Applications
Audio
Automotive
Broadband
Digital Control
Medical
Military
Optical Networking
Security
amplifier.ti.com
dataconverter.ti.com
www.dlp.com
www.ti.com/audio
Data Converters
DLP® Products
DSP
Clocks and Timers
Interface
www.ti.com/automotive
www.ti.com/broadband
www.ti.com/digitalcontrol
www.ti.com/medical
www.ti.com/military
www.ti.com/opticalnetwork
www.ti.com/security
www.ti.com/telephony
www.ti.com/video
dsp.ti.com
www.ti.com/clocks
interface.ti.com
logic.ti.com
power.ti.com
microcontroller.ti.com
www.ti-rfid.com
Logic
Power Mgmt
Microcontrollers
RFID
Telephony
Video & Imaging
Wireless
RF/IF and ZigBee® Solutions www.ti.com/lprf
www.ti.com/wireless
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2009, Texas Instruments Incorporated
相关型号：
©2020 ICPDF网 联系我们和版权申明