OPA349SA3KG4 [TI]
1A, Rail-to-Rail I/O CMOS OPERATIONAL AMPLIFIERS;
| 型号： | OPA349SA3KG4 |
| 厂家： | 
TEXAS INSTRUMENTS |
| 描述： | 1A, Rail-to-Rail I/O CMOS OPERATIONAL AMPLIFIERS 放大器 |
| 文件： | 总23页 (文件大小：1140K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
OPA349
OPA2349
OPA349
O
P
A
2
34
9
SBOS121B – JUNE 2000 – REVISED JANUARY 2004
1µA, Rail-to-Rail I/O CMOS
OPERATIONAL AMPLIFIERS
DESCRIPTION
FEATURES
The OPA349 and OPA2349 are ultra-low power operational
amplifiers that provide 70kHz bandwidth with only 1µA quies-
cent current. These rail-to-rail input and output amplifiers are
specifically designed for battery-powered applications. The
input common-mode voltage range extends 200mV beyond
the power-supply rails and the output swings to within 350mV
of the rails, maintaining wide dynamic range. Unlike some
micropower op amps, these parts are unity-gain stable and
require no external compensation to achieve wide band-
width. The OPA349 features a low input bias current that
allows the use of large source and feedback resistors.
● LOW SUPPLY CURRENT: 1µA
● GAIN-BANDWIDTH: 70kHz
● UNITY-GAIN STABLE
● LOW INPUT BIAS CURRENT: 10pA (max)
● WIDE SUPPLY RANGE: 1.8V to 5.5V
● INPUT RANGE: 200mV Beyond Rails
● OUTPUT SWINGS TO 350mV OF RAILS
● OUTPUT DRIVE CURRENT: 8mA
● OPEN-LOOP GAIN: 90dB
● MicroPACKAGES: SC70, SOT23-5, SOT23-8
The OPA349 can be operated with power supplies from 1.8V
to 5.5V with little change in performance, ensuring continuing
superior performance even in low battery situations.
APPLICATIONS
● BATTERY PACKS AND POWER SUPPLIES
● PORTABLE PHONES, PAGERS, AND CAMERAS
● SOLAR-POWERED SYSTEMS
● SMOKE, GAS, AND FIRE DETECTION SYSTEMS
● REMOTE SENSORS
● PCMCIA CARDS
● DRIVING ANALOG-TO-DIGITAL (A/D) CONVERTERS
● MicroPOWER FILTERS
The OPA349 comes in miniature SOT23-5, SC70, and SO-8
surface-mount packages. The OPA2349 dual is available in
SOT23-8, and SO-8 surface-mount packages. These tiny
packages are ideal for use in high-density applications, such
as PCMCIA cards, battery packs, and portable instruments.
The OPA349 is specified for 0°C to +70°C. The OPA2349 is
specified for –40°C to +70°C.
OPEN-LOOP GAIN AND PHASE vs FREQUENCY
100
OPAx349 RELATED PRODUCTS
90
80
70
60
50
40
30
20
10
0
0
FEATURES
PRODUCT
Gain
1µA, 5.5kHz, Rail-To-Rail
1µA, 5.5kHz, Rail-To-Rail
TLV240x
TLV224x
TLV238x
TLV27Lx
TLV276x
OPAx347
OPAx348
45
90
135
180
Phase
7µA, 160kHz, Rail-To-Rail, 2.7V to 16V Supply
7µA, 160kHz, Rail-To-Rail, Micro Power
20µA, 500kHz, Rail-To-Rail, 1.8V Micro Power
20µA, 350kHz, Rail-To-Rail, Micro Power
45µA, 1MHz, Rail-To-Rail, 2.1V to 5.5V Supply
0.1
1
10
100
1k
10k
100k
1M
Frequency (Hz)
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright © 2000-2004, Texas Instruments Incorporated
www.ti.com
ABSOLUTE MAXIMUM RATINGS(1)
ELECTROSTATIC
DISCHARGE SENSITIVITY
Supply Voltage, V+ to V– ................................................................... 5.5V
Signal Input Terminals, Voltage(2) .................. (V–) – 0.5V to (V+) + 0.5V
Current(2) .................................................... 10mA
This integrated circuit can be damaged by ESD. Texas Instru-
ments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling
and installation procedures can cause damage.
Output Short Circuit(3) .............................................................. Continuous
Operating Temperature, OPA2349 ................................–55°C to +125°C
Operating Temperature, OPA349 ........................................0°C to +85°C
Storage Temperature .....................................................–65°C to +150°C
Junction Temperature ...................................................................... 150°C
Lead Temperature (soldering, 3s) ................................................... 300°C
ESD damage can range from subtle performance degrada-
tion to complete device failure. Precision integrated circuits
may be more susceptible to damage because very small
parametric changes could cause the device not to meet its
published specifications.
NOTES: (1) Stresses above these ratings may cause permanent damage.
Exposure to absolute maximum conditions for extended periods may de-
grade device reliability. These are stress ratings only, and functional opera-
tion of the device at these, or any other conditions beyond those specified,
is not implied. (2) Input terminals are diode-clamped to the power-supply
rails. Input signals that can swing more than 0.5V beyond the supply rails
should be current-limited to 10mA or less. (3) Short-circuit to ground, one
amplifier per package.
PACKAGE/ORDERING INFORMATION(1)
PACKAGE
DESIGNATOR(1)
PACKAGE
MARKING
ORDERING
NUMBER
TRANSPORT
MEDIA, QUANTITY
PRODUCT
PACKAGE
Single
OPA349NA
SOT23-5
DBV
"
D
A49
"
OPA349UA
OPA349NA/250
OPA349NA/3K
OPA349UA
Tape and Reel, 250
Tape and Reel, 3000
Rails, 100
"
"
OPA349UA
SO-8
"
"
SC70-5
"
"
"
S49
"
OPA349UA/2K5
OPA349SA/250
OPA349SA/3K
Tape and Reel, 2500
Tape and Reel, 250
Tape and Reel, 3000
OPA349SA
DCK
"
"
Dual
OPA2349EA
SOT23-8
DCN
C49
"
OPA2349UA
OPA2349EA/250
OPA2349EA/3K
OPA2349UA
Tape and Reel, 250
Tape and Reel, 3000
Rails, 100
"
"
SO-8
"
"
D
"
OPA2349UA
"
"
OPA2349UA/2K5
Tape and Reel, 2500
NOTE: (1) For the most current package and ordering information, see the Package Option Addendum located at the end of this data sheet.
PIN CONFIGURATIONS
OPA349
Out
V–
1
2
3
5
4
V+
OPA2349
OPA349
NC(1)
V+
Out A
–In A
+In A
V–
1
2
3
4
8
7
6
5
NC(1)
–In
1
2
3
4
8
7
6
5
V+
+In
–In
Out B
–In B
+In B
Out
+In
SOT23-5
NC(1)
V–
OPA349
+In
1
2
3
5
4
V+
SOT23-8, SO-8
SO-8
V–
NOTE: (1) NC indicates no internal connection.
–In
Out
SC70-5
OPA349, 2349
2
SBOS121B
www.ti.com
ELECTRICAL CHARACTERISTICS (Single): VS = +1.8V to +5.5V
Boldface limits apply over the specified temperature range, TA = 0°C to +70°C.
At TA = +25°C, and RL = 1MΩ connected to VS/2, unless otherwise noted.
OPA349
PARAMETER
CONDITION
MIN
TYP(1)
MAX
UNITS
OFFSET VOLTAGE
Input Offset Voltage
Over Temperature
Drift
vs Power-Supply Rejection Ratio
Over Temperature
VOS
VS = 5V, VCM = 2.5V
±2
±2
±15
350
±10
±13
mV
mV
µV/°C
µV/V
µV/V
dVOS /dT
PSRR
VS = 1.8V to 5.5V, VCM = (V–) + 0.3V
1000
3000
INPUT VOLTAGE RANGE
Common-Mode Voltage Range
Common-Mode Rejection Ratio
Over Temperature
VCM
CMRR
(V–) – 0.2
(V+) + 0.2
V
V
V
S = +5V, –0.2V < VCM < 5.2V
S = +5V, –0.2V < VCM < 3.5V
48
46
52
50
60
72
dB
dB
dB
dB
Over Temperature
INPUT BIAS CURRENT
Input Bias Current
Input Offset Current
IB
IOS
±0.5
±1
±10
±10
pA
pA
INPUT IMPEDANCE
Differential
Common-Mode
1013 || 2
1013 || 4
Ω || pF
Ω || pF
NOISE
Input Voltage Noise, f = 0.1Hz to 10Hz
Input Voltage Noise Density, f = 1kHz
Current Noise Density, f = 1kHz
8
300
4
µVp-p
nV/√Hz
fA/√Hz
en
in
OPEN-LOOP GAIN
Open-Loop Voltage Gain
Over Temperature
Open-Loop Voltage Gain
Over Temperature
AOL
RL = 1MΩ, VS = +5.5V, +0.3V < VO < +5.2V
74
72
74
60
90
90
dB
dB
dB
dB
AOL RL = 10kΩ, VS = +5.5V, +0.35V < VO < +5.15V
OUTPUT
Voltage Output Swing from Rail
Over Temperature
RL = 1MΩ, VS = +5.5V, AOL > 74dB
RL = 10kΩ, VS = +5.5V, AOL > 74dB
300
300
350
350
mV
mV
mV
mV
mA
mA
Over Temperature
Output Current
Short-Circuit Current
Capacitive Load Drive
±8
±10
ISC
CLOAD
See Typical Characteristics
FREQUENCY RESPONSE
Gain-Bandwidth Product
Slew Rate
Settling Time, 0.1%
0.01%
CL = 10pF
G = +1
VS = +5V, G = +1
VS = 5V, 1V Step
VS = 5V, 1V Step
VIN • Gain = VS
GBW
SR
tS
70
0.02
65
80
5
kHz
V/µs
µs
µs
µs
Overload Recovery Time
POWER SUPPLY
Specified Voltage Range
Quiescent Current (per amplifier)
Over Temperature
VS
IQ
+1.8
+5.5
2
10
V
µA
µA
IO = 0
1
TEMPERATURE RANGE
Specified Range
Operating Range
0
0
–65
+70
+85
+150
°C
°C
°C
Storage Range
Thermal Resistance
SOT23-5 Surface-Mount
SO-8 Surface-Mount
SC70-5 Surface-Mount
θJA
200
150
250
°C/W
°C/W
°C/W
NOTE: (1) Refer to Typical Characteristic curves.
OPA349, 2349
3
SBOS121B
www.ti.com
ELECTRICAL CHARACTERISTICS (Dual): VS = +1.8V to +5.5V
Boldface limits apply over the specified temperature range, TA = –40°C to +70°C.
At TA = +25°C, and RL = 1MΩ connected to VS/2, unless otherwise noted.
OPA2349
PARAMETER
CONDITION
MIN
TYP(1)
MAX
UNITS
OFFSET VOLTAGE
Input Offset Voltage
Over Temperature
Drift
vs Power Supply
Over Temperature
Channel Separation, dc
VOS
VS = 5V, VCM = 2.5V
±2
±2
±15
350
±10
±13
mV
mV
dVOS /dT
PSRR
µV/°C
µV/V
µV/V
µV/V
dB
VS = 1.8V to 5.5V, VCM = (V–) + 0.3V
1000
3000
RL = 100kΩ
f = 1kHz
10
66(1)
INPUT VOLTAGE RANGE
Common-Mode Voltage Range
Common-Mode Rejection Ratio
Over Temperature
VCM
CMRR
(V–) – 0.2
(V+) + 0.2
V
V
V
S = +5V, –0.2V < VCM < 5.2V
S = +5V, –0.2V < VCM < 3.5V
48
46
52
50
60
72
dB
dB
dB
dB
Over Temperature
INPUT BIAS CURRENT
Input Bias Current
Input Offset Current
IB
IOS
±0.5
±1
±10
±10
pA
pA
INPUT IMPEDANCE
Differential
Common-Mode
1013 || 2
1013 || 4
Ω || pF
Ω || pF
NOISE
Input Voltage Noise, f = 0.1Hz to 10Hz
Input Voltage Noise Density, f = 1kHz
Current Noise Density, f = 1kHz
8
300
4
µVp-p
nV/√Hz
fA/√Hz
en
in
OPEN-LOOP GAIN
Open-Loop Voltage Gain
Over Temperature
Open-Loop Voltage Gain
Over Temperature
AOL
RL = 1MΩ, VS = +5.5V, +0.3V < VO < +5.2V
74
72
74
60
90
90
dB
dB
dB
dB
AOL RL = 10kΩ, VS = +5.5V, +0.35V < VO < +5.15V
OUTPUT
Voltage Output Swing from Rail
Over Temperature
RL = 1MΩ, VS = +5.5V, AOL > 74dB
RL = 10kΩ, VS = +5.5V, AOL > 74dB
150
200
300
300
350
350
mV
mV
mV
mV
mA
mA
Over Temperature
Output Current
Short-Circuit Current
±8
±10
ISC
FREQUENCY RESPONSE
Gain-Bandwidth Product
Slew Rate
Settling Time, 0.1%
0.01%
CL = 10pF
G = +1
VS = +5V, G = +1
VS = 5V, 1V Step
VS = 5V, 1V Step
VIN • Gain = VS
GBW
SR
tS
70
0.02
65
80
5
kHz
V/µs
µs
µs
µs
Overload Recovery Time
POWER SUPPLY
Specified Voltage Range
Quiescent Current (per amplifier)
Over Temperature
VS
IQ
+1.8
+5.5
2
10
V
µA
µA
IO = 0
1
TEMPERATURE RANGE
Specified Range
Operating Range
–40
–40
–65
+70
+85
+150
°C
°C
°C
Storage Range
Thermal Resistance
SOT23-8 Surface-Mount
SO-8 Surface-Mount
θJA
200
150
°C/W
°C/W
NOTE: (1) Refer to Typical Characteristic curves.
OPA349, 2349
4
SBOS121B
www.ti.com
TYPICAL CHARACTERISTICS
At TA = +25°C, VS = +5V, and RL = 1MΩ connected to VS/2, unless otherwise noted.
OPEN-LOOP GAIN vs TEMPERATURE
OPEN-LOOP GAIN AND PHASE vs FREQUENCY
100
100
95
90
85
80
75
70
65
60
90
80
70
60
50
40
30
20
10
0
0
Gain
RL = 1MΩ
45
90
135
180
Single version operation
below 0°C is not recommended.
RL = 10kΩ
Phase
0.1
1
10
100
1k
10k
100k
1M
–75
–50
–25
0
25
50
75 85
75 85
75 85
Frequency (Hz)
Temperature (°C)
COMMON-MODE REJECTION RATIO
vs TEMPERATURE
COMMON-MODE REJECTION RATIO vs FREQUENCY
80
70
60
50
40
30
20
10
0
80
75
70
65
60
55
50
–0.2V < VCM < 3.5V
Single version operation
below 0°C is not recommended.
–0.2V < VCM < 5.2V
10
100
1k
10k
100k
–75
–50
–25
0
25
50
Frequency (Hz)
Temperature (°C)
POWER-SUPPLY REJECTION RATIO
vs TEMPERATURE
POWER-SUPPLY REJECTION RATIO vs FREQUENCY
100
90
80
70
60
50
40
30
20
10
0
80
70
60
50
40
+PSRR
–PSRR
Single version operation
below 0°C is not recommended.
10
100
1k
Frequency (Hz)
10k
100k
–75
–50
–25
0
25
50
Temperature (°C)
OPA349, 2349
5
SBOS121B
www.ti.com
TYPICAL CHARACTERISTICS (Cont.)
At TA = +25°C, VS = +5V, and RL = 1MΩ connected to VS/2, unless otherwise noted.
QUIESCENT AND SHORT-CIRCUIT
vs SUPPLY VOLTAGE
QUIESCENT CURRENT vs TEMPERATURE
3.0
1.4
1.2
1.0
0.8
0.6
0.4
12
10
8
ISC at –40°C
(dual version only)
2.5
2.0
ISC at 25°C
OPA2349
1.5
1.0
6
IQ
I
SC at 125°C
OPA349
4
0.5
0.0
2
–75
–50
–25
0
25
50
75 85
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
Temperature (°C)
Supply Voltage (V)
SHORT-CIRCUIT CURRENT vs TEMPERATURE
VS = +5.5V
INPUT BIAS CURRENT vs TEMPERATURE
15
10k
1k
10
5
VS = +2.5V
100
10
0
VS = +1.8V
–5
–10
–15
Single version operation
below 0°C is not recommended.
VS = +2.5V
Single version operation
below 0°C is not recommended.
1
VS = +5.5V
0.1
–55
–35
–15
0 5
25
45
65
85
85
75
–75
–50
–25
0
25
50
Temperature (°C)
Temperature (°C)
INPUT VOLTAGE NOISE DENSITY
CHANNEL SEPARATION vs FREQUENCY
1000
100
90
80
70
60
50
40
30
20
10
0
400
100
10
100
1k
10k
10
100
1k
10k
100k
Frequency (Hz)
Frequency (Hz)
OPA349, 2349
6
SBOS121B
www.ti.com
TYPICAL CHARACTERISTICS (Cont.)
At TA = +25°C, VS = +5V, and RL = 1MΩ connected to VS/2, unless otherwise noted.
OFFSET VOLTAGE DRIFT
PRODUCTION DISTRIBUTION
OUTPUT VOLTAGE vs OUTPUT CURRENT
(V+)
(V+) – 1
(V+) – 2
(V–) + 2
(V–) + 1
(V–)
–40°C
(dual version
only)
125°C
25°C
0
1
2
3
4
5
6
7
8
9
10
–30 –25 –20 –15 –10 –5
0
5
10 15 20 25 30 35 40
Output Current (mA)
Offset Voltage Drift (µV/°C)
LARGE-SIGNAL STEP RESPONSE
G = 1, RL = 1MΩ
MAXIMUM OUTPUT VOLTAGE vs FREQUENCY
VS = +5.5V
6
5
4
3
2
1
0
VS = +5V
VS = +2.5V
VS = +1.8V
100
1k
10k
100k
100µs/div
Frequency (Hz)
SMALL-SIGNAL STEP RESPONSE
SMALL-SIGNAL STEP RESPONSE
G = 1, RL = 1MΩ, CL = 500pF
G = 1, RL = 1MΩ, CL = 20pF
100µs/div
40µs/div
OPA349, 2349
7
SBOS121B
www.ti.com
TYPICAL CHARACTERISTICS (Cont.)
At TA = +25°C, VS = +5V, and RL = 1MΩ connected to VS/2, unless otherwise noted.
SMALL-SIGNAL OVERSHOOT vs LOAD CAPACITANCE
(SOT23, SO-8)
SMALL-SIGNAL OVERSHOOT vs LOAD CAPACITANCE
(SC70)
100
90
80
70
60
50
40
30
20
10
0
100
90
80
70
60
G = −1V/V
G = +1V/V
50
G = −1V/V, RL = 1MΩ
40
30
G = +1V/V, RL = 1MΩ
20
10
0
10
100
1k
10
100
1k
Load Capacitance (pF)
Load Capacitance (pF)
OPA349, 2349
8
SBOS121B
www.ti.com
biased with a voltage divider. Resistor values must be very
large to minimize current. The large feedback resistor value
reacts with input capacitance and stray capacitance to pro-
duce a pole in the feedback network. A feedback capacitor
may be required to assure stability and limit overshoot or
gain peaking. Check circuit performance carefully to assure
that biasing and feedback techniques meet signal and quies-
cent current requirements.
APPLICATIONS INFORMATION
The OPA349 series op amps are unity-gain stable and can
operate on a single supply, making them highly versatile and
easy to use. Power-supply pins should be bypassed with
0.01µF ceramic capacitors.
The OPA349 series op amps are fully specified and tested
from +1.8V to +5.5V. Parameters that vary significantly with
operating voltages or temperature are shown in the Typical
Characteristic curves.
RAIL-TO-RAIL INPUT
The input common-mode voltage range of the OPA349 series
extends 200mV beyond the supply rails. This is achieved with a
complementary input stage—an N-channel input differential pair
inparallelwithaP-channeldifferentialpair(asshowninFigure2).
TheN-channelpairisactiveforinputvoltagesclosetothepositive
rail, typically (V+) – 1.3V to 200mV above the positive supply,
while the P-channel pair is on for inputs from 200mV below the
negative supply to approximately (V+) – 1.3V. There is a small
transitionregion,typically(V+)–1.5Vto(V+)–1.1V,inwhichboth
pairs are on. This 400mV transition region can vary 300mV with
processvariation.Thus,thetransitionregion(bothstageson)can
range from (V+) – 1.8V to (V+) – 1.4V on the low end, up to
(V+) – 1.2V to (V+) – 0.8V on the high end. Within the 400mV
transition region PSRR, CMRR, offset voltage, offset drift, and
THDmaybedegradedcomparedtooperationoutsidethisregion.
For more information on designing with rail-to-rail input op amps,
see Figure 3, Design Optimization with Rail-to-Rail Input Op
Amps.
The ultra-low quiescent current of the OPA349 requires
careful application circuit techniques to achieve low overall
current consumption. Figure 1 shows an ac-coupled amplifier
+1.8V to 5.5V
CF
CF may be required
for best stability or to
3pF
reduce frequency
peaking—see text.
R1
10M
R3
2M
R5
10M
G = 11
VOUT
10nF
OPA349
R2
R4
10M
2M
FIGURE 1. AC-Coupled Amplifier.
V+
Reference
Current
VIN
+
VIN
–
VBIAS1
Class AB
Control
VO
Circuitry
VBIAS2
V–
(Ground)
FIGURE 2. Simplified Schematic.
OPA349, 2349
9
SBOS121B
www.ti.com
DESIGN OPTIMIZATION WITH RAIL-TO-RAIL INPUT OP AMPS
In most applications, operation is within the range of only one
wide input swing is required. A design option would be to
configure the op amp as a unity-gain inverter as shown below
andholdthenoninvertinginputatasetcommon-modevoltage
outside the transition region. This can be accomplished with a
voltage divider from the supply. The voltage divider should be
designed such that the biasing point for the noninverting input
is outside the transition region.
differential pair. However, some applications can subject the
amplifier to a common-mode signal in the transition region.
Under this condition, the inherent mismatch between the two
differential pairs may lead to degradation of the CMRR and
THD. The unity-gain buffer configuration is the most problem-
atic—itwilltraversethroughthetransitionregionifasufficiently
R
R
VOUT
VIN
VCM
FIGURE 3. Design Optimization.
COMMON-MODE REJECTION
Figure 4a). Similarly, loads that can cause current to flow out
of the output pin when the output voltage is near V– can
cause oscillations. The op amp will recover to normal opera-
tion a few microseconds after the output is driven positively
out of the rail.
TheCMRRfortheOPA349is specifiedintwowayssothebest
match for a given application may be used. First, the CMRR of
the device in the common-mode range below the transition
region (VCM < (V+) – 1.5V) is given. This specification is the
best indicator of the capability of the device when the applica-
tion requires use of one of the differential input pairs. Second,
the CMRR at VS = 5V over the entire common-mode range is
specified.
Some op amp applications can produce this condition even
without a load connected to V–. The integrator in Figure 4b
shows an example of this effect. Assume that the output
ramps negatively, and saturates near 0V. Any negative-
going step at VIN will produce a positive output current pulse
through R1 and C1. This may incite the oscillation. Diode D1
prevents the input step from pulling output current when the
output is saturated at the rail, thus preventing the oscillation.
OUTPUT DRIVEN TO V– RAIL
Loads that connect to single-supply ground (or the V– supply
pin) can cause the OPA349 or OPA2349 to oscillate if the
output voltage is driven into the negative rail (as shown in
V+
a)
b)
R1
C1
V+
1MΩ
1nF
VIN
0V
D1
1N4148
2V
0V
VO
OPA349
OPA349
(No Load)
VIN
RL
1V
0V
FIGURE 4. Output Driven to Negative Rail.
OPA349, 2349
10
SBOS121B
www.ti.com
PACKAGE OPTION ADDENDUM
www.ti.com
24-Jan-2013
PACKAGING INFORMATION
Orderable Device
OPA2349EA/250
OPA2349EA/3K
OPA2349UA
Status Package Type Package Pins Package Qty
Eco Plan Lead/Ball Finish
MSL Peak Temp
Op Temp (°C)
Top-Side Markings
Samples
Drawing
(1)
(2)
(3)
(4)
ACTIVE
SOT-23
SOT-23
SOIC
DCN
8
8
8
8
8
8
5
5
5
5
5
5
5
5
8
8
8
250
3000
75
Green (RoHS
& no Sb/Br)
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
Level-2-260C-1 YEAR
Level-2-260C-1 YEAR
Level-2-260C-1 YEAR
Level-2-260C-1 YEAR
Level-2-260C-1 YEAR
Level-2-260C-1 YEAR
Level-2-260C-1 YEAR
Level-2-260C-1 YEAR
Level-2-260C-1 YEAR
Level-2-260C-1 YEAR
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-2-260C-1 YEAR
Level-2-260C-1 YEAR
Level-2-260C-1 YEAR
C49
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
DCN
D
Green (RoHS
& no Sb/Br)
C49
Green (RoHS
& no Sb/Br)
OPA
2349UA
OPA2349UA/2K5
OPA2349UA/2K5G4
OPA2349UAG4
OPA349NA/250
OPA349NA/250G4
OPA349NA/3K
SOIC
D
2500
2500
75
Green (RoHS
& no Sb/Br)
OPA
2349UA
SOIC
D
Green (RoHS
& no Sb/Br)
OPA
2349UA
SOIC
D
Green (RoHS
& no Sb/Br)
OPA
2349UA
SOT-23
SOT-23
SOT-23
SOT-23
SC70
DBV
DBV
DBV
DBV
DCK
DCK
DCK
DCK
D
250
Green (RoHS
& no Sb/Br)
A49
A49
A49
A49
S49
S49
S49
S49
250
Green (RoHS
& no Sb/Br)
3000
3000
250
Green (RoHS
& no Sb/Br)
OPA349NA/3KG4
OPA349SA/250
OPA349SA/250G4
OPA349SA/3K
Green (RoHS
& no Sb/Br)
Green (RoHS
& no Sb/Br)
SC70
250
Green (RoHS
& no Sb/Br)
SC70
3000
3000
75
Green (RoHS
& no Sb/Br)
OPA349SA/3KG4
OPA349UA
SC70
Green (RoHS
& no Sb/Br)
SOIC
Green (RoHS
& no Sb/Br)
OPA
349UA
OPA349UA/2K5
OPA349UA/2K5G4
SOIC
D
2500
2500
Green (RoHS
& no Sb/Br)
OPA
349UA
SOIC
D
Green (RoHS
& no Sb/Br)
OPA
349UA
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
24-Jan-2013
Orderable Device
OPA349UAG4
Status Package Type Package Pins Package Qty
Eco Plan Lead/Ball Finish
MSL Peak Temp
Op Temp (°C)
Top-Side Markings
Samples
Drawing
(1)
(2)
(3)
(4)
ACTIVE
SOIC
D
8
75
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
OPA
349UA
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4) Only one of markings shown within the brackets will appear on the physical device.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com
8-Apr-2013
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
B0
K0
P1
W
Pin1
Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant
(mm) W1 (mm)
OPA2349EA/250
OPA2349EA/3K
OPA349SA/250
OPA349SA/3K
OPA349UA/2K5
SOT-23
SOT-23
SC70
DCN
DCN
DCK
DCK
D
8
8
5
5
8
250
3000
250
180.0
180.0
179.0
179.0
330.0
8.4
8.4
3.2
3.2
2.2
2.2
6.4
3.1
3.1
2.5
2.5
5.2
1.39
1.39
1.2
4.0
4.0
4.0
4.0
8.0
8.0
8.0
Q3
Q3
Q3
Q3
Q1
8.4
8.0
SC70
3000
2500
8.4
1.2
8.0
SOIC
12.4
2.1
12.0
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
8-Apr-2013
*All dimensions are nominal
Device
Package Type Package Drawing Pins
SPQ
Length (mm) Width (mm) Height (mm)
OPA2349EA/250
OPA2349EA/3K
OPA349SA/250
OPA349SA/3K
OPA349UA/2K5
SOT-23
SOT-23
SC70
DCN
DCN
DCK
DCK
D
8
8
5
5
8
250
3000
250
210.0
210.0
203.0
203.0
367.0
185.0
185.0
203.0
203.0
367.0
35.0
35.0
35.0
35.0
35.0
SC70
3000
2500
SOIC
Pack Materials-Page 2
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.
Products
Applications
Audio
www.ti.com/audio
amplifier.ti.com
dataconverter.ti.com
www.dlp.com
Automotive and Transportation www.ti.com/automotive
Communications and Telecom www.ti.com/communications
Amplifiers
Data Converters
DLP® Products
DSP
Computers and Peripherals
Consumer Electronics
Energy and Lighting
Industrial
www.ti.com/computers
www.ti.com/consumer-apps
www.ti.com/energy
dsp.ti.com
Clocks and Timers
Interface
www.ti.com/clocks
interface.ti.com
logic.ti.com
www.ti.com/industrial
www.ti.com/medical
Medical
Logic
Security
www.ti.com/security
Power Mgmt
Microcontrollers
RFID
power.ti.com
Space, Avionics and Defense
Video and Imaging
www.ti.com/space-avionics-defense
www.ti.com/video
microcontroller.ti.com
www.ti-rfid.com
www.ti.com/omap
OMAP Applications Processors
Wireless Connectivity
TI E2E Community
e2e.ti.com
www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2013, Texas Instruments Incorporated
相关型号：
OPA349UA/2K5
Single, 5.5-V, 70-kHz, low quiescent current (1-μA), RRIO operational amplifier | D | 8 | -40 to 85
TI
©2020 ICPDF网 联系我们和版权申明