首页 > RI-ACC-008B

RI-ACC-008B

更新时间：2024-09-18 05:43:11

品牌：TI

描述：SERIES 2000 HIGH PERFORMANCE REMOTE ANTENNA RFM AND TUNING MODULE

PDF下载

中文翻译

PCB计价

概述
数据手册

如果您发现信息不准确，欢迎纠错

RI-ACC-008B 概述

SERIES 2000 HIGH PERFORMANCE REMOTE ANTENNA RFM AND TUNING MODULE 2000系列高性能远程天线RFM和调节模块

RI-ACC-008B 数据手册

通过下载RI-ACC-008B数据手册来全面了解它。这个PDF文档包含了所有必要的细节，如产品概述、功能特性、引脚定义、引脚排列图等信息。

PDF下载

RI-RFM-008B, RI-ACC-008B

www.ti.com

SCBS850–MARCH 2001

SERIES 2000 HIGH PERFORMANCE REMOTE ANTENNA RFM AND TUNING MODULE

FEATURES

APPLICATIONS

•

Access Control

•

Best in Class Performance Through Patented

HDX Technology

Vehicle Identification

Container Tracking

Asset Management

Waste Management

•

High Power Output

Extended Antenna Induction Range

Reader Antenna Distance Up to 120 Meters

Proven In Harsh Industrial Environments

Easy To Install And Use

DESCRIPTION

The Texas Instruments’ low-frequency (LF) reader provides all the functionality required to communicate with

Texas Instruments 134.2 kHz LF transponders which are available in a variety of form factors. The

RI-RFM-008B radio frequency power module is capable driving the RI-ACC-008B, which then forms the

resonant circuit with the antenna. The distance between the antenna - RI-ACC-008B combination and the reader

(RI-RFM-008B + control module) can be extended up to 120 meters when connected by a symmetrical twinax

cable.

The RI-ACC-008B radio frequency power module is capable driving a variety of antennas with extended

inductance ranges from 8µH to 80µH including TI standard antennas RI-ANT-G01E, RI-ANT-G02E,

RI-ANT-G04E gate antennas as well as RI-ANT-S01C and RI-ANT-S02C stick antennas. The RI-RFM-008 is

designed to be connected to control modules RI-CTL-MB2A (RS232 interface) or RI-CTL-MB6A (RS422/485

interface) which provide the interface to connect a host system, power supply connectors and additional I/O’s.

The RI-RFM-008B module in combination with a control module and the RI-ACC-008B is well suited for usage in

a broad range of applications including, but not limited to, access control, vehicle identification, container

tracking, asset management and waste management applications.

The Series 2000 High Performance Remote Antenna RFM together with the Antenna Tuning Module supports

the use of antennas installed at a distance of up to 120 meters. It is the interface between the 134.2 kHz

HDX/FSK transponder and the Data Processing Unit. It sends an energizing signal to the transponder,

modulates the RF signal to send data to the transponder, receives the identification signal and processes it for

digital decoding.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas

Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.

RI-RFM-008B, RI-ACC-008B

www.ti.com

SCBS850–MARCH 2001

ABSOLUTE MAXIMUM RATINGS⁽¹⁾

over operating free-air temperature range (unless otherwise noted)

RI-RFM-008B

RI-ACC-008B

–25 to +70

–40 to +85

UNIT

°C

Operating Temperature

Storage Temperature

–25 to +70

–40 to +85

°C

(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings

only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating

Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

RECOMMENDED OPERATING CONDITIONS

over operating free-air temperature range (unless otherwise noted)

RI-RFM-008B

RI-ACC-008B

Power Supply

7 to 24 Vdc, regulated

—

OPERATING CHARACTERISTICS

over operating free-air temperature range (unless otherwise noted)

PART NUMBER

PARAMETER

RI-RFM-008B

UNIT

RI-ACC-008B

Relative Humidity

< 97% non-condensing, IEC 68-2-30 Test Db, 21 cycles

RF Transmit Frequency

Transponder Types

Antenna Tuning Range

134.2

kHz

134.2 kHz HDX/FSK

Determined by the tuning-board

8 to 80 µH

Max. 280 / 400 Vpeak

(depending on the configured

inductance range)

Antenna Resonance Voltage

Max. 380 Vpeak

Dimensions (L × W × H)

Weight

(83 × 93 × 44) ± 1

(115 × 70 × 27) ± 1

160

162

Cable (RFM to tuning-board)

Symmetrical shielded cable (twin-ax)

Submit Documentation Feedback

PACKAGE OPTION ADDENDUM

www.ti.com

31-Jan-2007

PACKAGING INFORMATION

Orderable Device

Status ⁽¹⁾

Package Package

Type Drawing

Pins Package Eco Plan ⁽²⁾Lead/Ball Finish MSL Peak Temp ⁽³⁾

Qty

RI-RFM-008B-00

ACTIVE

TBD

Call TI

⁽¹⁾The marketing status values are defined as follows:

ACTIVE: Product device recommended for new designs.

LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.

NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in

a new design.

PREVIEW: Device has been announced but is not in production. Samples may or may not be available.

OBSOLETE: TI has discontinued the production of the device.

(2)

Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check

http://www.ti.com/productcontent for the latest availability information and additional product content details.

TBD: The Pb-Free/Green conversion plan has not been defined.

Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements

for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered

at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.

Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and

package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS

compatible) as defined above.

Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame

retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)

(3)

MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder

temperature.

Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is

provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the

accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take

reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on

incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited

information may not be available for release.

In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI

to Customer on an annual basis.

Addendum-Page 1

IMPORTANT NOTICE

Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,

enhancements, improvements, and other changes to its products and services at any time and to

discontinue any product or service without notice. Customers should obtain the latest relevant information

before placing orders and should verify that such information is current and complete. All products are sold

subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.

TI warrants performance of its hardware products to the specifications applicable at the time of sale in

accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent

TI deems necessary to support this warranty. Except where mandated by government requirements, testing

of all parameters of each product is not necessarily performed.

TI assumes no liability for applications assistance or customer product design. Customers are responsible

for their products and applications using TI components. To minimize the risks associated with customer

products and applications, customers should provide adequate design and operating safeguards.

TI does not warrant or represent that any license, either express or implied, is granted under any TI patent

right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine,

or process in which TI products or services are used. Information published by TI regarding third-party

products or services does not constitute a license from TI to use such products or services or a warranty or

endorsement thereof. Use of such information may require a license from a third party under the patents or

other intellectual property of the third party, or a license from TI under the patents or other intellectual

property of TI.

Reproduction of information in TI data books or data sheets is permissible only if reproduction is without

alteration and is accompanied by all associated warranties, conditions, limitations, and notices.

Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not

responsible or liable for such altered documentation.

Resale of TI products or services with statements different from or beyond the parameters stated by TI for

that product or service voids all express and any implied warranties for the associated TI product or service

and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.

Following are URLs where you can obtain information on other Texas Instruments products and application

solutions:

Products

Amplifiers

Data Converters

DSP

Interface

Applications

Audio

Automotive

Broadband

Digital Control

Military

amplifier.ti.com

dataconverter.ti.com

dsp.ti.com

interface.ti.com

logic.ti.com

www.ti.com/audio

www.ti.com/automotive

www.ti.com/broadband

www.ti.com/digitalcontrol

www.ti.com/military

Logic

Power Mgmt

Microcontrollers

Low Power Wireless

power.ti.com

microcontroller.ti.com

www.ti.com/lpw

Optical Networking

Security

Telephony

Video & Imaging

Wireless

www.ti.com/opticalnetwork

www.ti.com/security

www.ti.com/telephony

www.ti.com/video

www.ti.com/wireless

Mailing Address:

Texas Instruments

Post Office Box 655303 Dallas, Texas 75265

RI-ACC-008B 相关器件

型号	制造商	描述	价格	文档
RI-ACC-008B-00	TI	SERIES 2000 HIGH PERFORMANCE REMOTE ANTENNA RFM AND TUNING MODULE	获取价格
RI-ACC-008B-30	TI	HIGH PERFORMANCE LF RADIO FREQUENCY MODULE	获取价格
RI-ACC-SHT3-00	TI	TRANSPONDER SHEETING	获取价格
RI-ACC-T006-00	TI	TRANSPONDER HOUSING	获取价格
RI-ANT-G01E	TI	SERIES 2000 ANTENNAS	获取价格
RI-ANT-G01E-30	TI	ANTENNA-OTHER	获取价格
RI-ANT-G01E_16	TI	SERIES 2000 ANTENNAS	获取价格
RI-ANT-G02E	TI	SERIES 2000 ANTENNAS	获取价格
RI-ANT-G02E-30	TI	ANTENNA-OTHER	获取价格
RI-ANT-G04E	TI	SERIES 2000 ANTENNAS	获取价格