RI-ANT-S02C-00 [TI]
ANTENNA-OTHER;
| 型号： | RI-ANT-S02C-00 |
| 厂家： | 
TEXAS INSTRUMENTS |
| 描述： | ANTENNA-OTHER 射频 微波 |
| 文件： | 总5页 (文件大小：256K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
RI-ANT-G01E, RI-ANT-G02E, RI-ANT-G04E
RI-ANT-S01C, RI-ANT-S02C, RI-ANT-P02A
www.ti.com
SCBS845–MARCH 2002
SERIES 2000 ANTENNAS
FEATURES
APPLICATIONS
•
•
•
•
•
Access Control
•
Best in Class Performance Through Patented
HDX Technology
Vehicle Identification
Container Tracking
Asset Management
Waste Management
•
Protection Class IP 65 and Higher (Exception:
RI-ANTG04E)
•
•
•
6 Form Factors available
Proven in Harsh Industrial Environments
Easy to Install and Use
DESCRIPTION
These antenna products connect to Radio Frequency Modules (RFM) and reader/writers to form the interface to
the low frequency (LF) 134.2 kHz Texas Instruments transponders. In combination with a reader/writer they
transmit energy and signals to the transponder and receive the response from the tag. There are three standard
gate antennas (small, medium and large), two standard stick antennas with 1 or 3 meter cable length and a stick
antenna specially designed for use with the Mini-RFM available for usage in low frequency systems. Each
antenna is capable of creating a specific size and shape of read zone to meet the requirements of the target
application. In general the gate antennas create a large read zone including greater read distance, while the
stick antennas provide a more focused read zone and an ability to discriminate between transponders.
The antennas are well suited for usage in a broad range of applications including, but not limited to, access
control, vehicle identification, container tracking, asset management and waste management applications.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Copyright © 2002, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
RI-ANT-G01E, RI-ANT-G02E, RI-ANT-G04E
RI-ANT-S01C, RI-ANT-S02C, RI-ANT-P02A
www.ti.com
SCBS845–MARCH 2002
GATE ANTENNAS – SPECIFICATIONS
ABSOLUTE MAXIMUM RATINGS
over operating free-air temperature range (unless otherwise noted)
RI-ANT-G01E
RI-ANT-G02E
–30 to +60
RI-ANT-G04E
–30 to +60
UNIT
°C
Operating Temperature
Storage Temperature
–30 to +60
–40 to +70
–40 to +70
–40 to +70
°C
OPERATING CHARACTERISTICS
over operating free-air temperature range (unless otherwise noted)
PART NUMBER
RI-ANT-G02E
PARAMETER
RI-ANT-G01E
UNIT
RI-ANT-G04E
Typically 26 µH @ 134.2
IP 44
Inductance
Typically 27 µH @ 134.2
Typically 27 µH @ 134.2
kHz
Protection Class
Vibration
IP 65
IP 65
Mil-Std-810E, Test 514.4 (Category 1, Procedure 1; Basic transportation)
UVSHIPS (UV Stabilized High Impact Polystyrol)
Case Material
1018 ± 5 × 518 ± 5 × 47 ±
5
Dimensions (mm)
715 ± 5 × 270 ± 3 × 25 ± 1
200 ± 3 × 200 ± 3 × 25 ± 1
Weight
Typically 745
1
Typically 425
1
Typically 2500
—
g
Cable Length
m
1/4 inch push-on
(automotive type)
Connection Terminals
Mounting
Spade/Tongue, stud hole 3.5 mm, width 7.5 mm
Use non-metallic clamps, standard screws and washers
through 6.5mm pre-drilled holes, so that the screw hole is
flush with the mounting. Mounting material is not supplied
with the antenna.
Suitable for pole or wall
2
Submit Documentation Feedback
RI-ANT-G01E, RI-ANT-G02E, RI-ANT-G04E
RI-ANT-S01C, RI-ANT-S02C, RI-ANT-P02A
www.ti.com
SCBS845–MARCH 2002
STICK ANTENNAS – SPECIFICATIONS
ABSOLUTE MAXIMUM RATINGS
over operating free-air temperature range (unless otherwise noted)
RI-ANT-P02A
(FOR RI-RFM-003B)
RI-ANT-S01C
RI-ANT-S02C
UNIT
Operating Temperature
Storage Temperature
–30 to +70
–40 to +85
–30 to +70
–40 to +85
–30 to +70
°C
°C
–40 to +85
OPERATING CHARACTERISTICS
over operating free-air temperature range (unless otherwise noted)
PART NUMBER
RI-ANT-S02C
PARAMETER
RI-ANT-S01C
UNIT
RI-ANT-P02A
(FOR RI-RFM-003B)
Inductance
Typically 27 µH @ 134.2
Typically 27 µH @ 134.2 Typically 116 µH @ 134.2
IP 66 IP 65
kHz
Protection Class
Vibration
IP 66
Mil-Std-810E, Test 514.4 (Category 1, Procedure 1; Basic transportation)
Glass reinforced epoxy (grey)
Case Material
Dimensions (mm)
Weight
140 ± 2 × 21 ± 2 (dia.)
140 ± 2 × 21 ± 2 (dia.)
Typically 185
3
133 ± 1 × 21.3 ± 1 (dia.)
Typically 105
0.1
Typically 134
1
g
Cable Length
m
Ring lugs:
Ring lugs:
Ring lugs:
Connection Terminals
Mounting
3.5 mm inside diameter
7.5 mm outside diameter
3.5 mm inside diameter 2.8 mm inside diameter
7.5 mm outside diameter 6.0 mm outside diameter
Use non-metal clamps. Mounting material is not supplied with the antenna.
Readout Pattern of Ferrite Rod (Stick) and Gate Antennas
Trp. 1 reading field
Trp. 2 reading field
Trp. 1
Trp. 1
Trp. 2
Trp. 2
Stick Antenna
Gate Antenna
3
Submit Documentation Feedback
PACKAGE OPTION ADDENDUM
www.ti.com
28-May-2009
PACKAGING INFORMATION
Orderable Device
Status (1)
Package Package
Type Drawing
Pins Package Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
Qty
RI-ANT-G01E-30
RI-ANT-G02E-30
RI-ANT-G04E
ACTIVE
ACTIVE
0
0
1
0
1
0
0
1
1
1
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
OBSOLETE
ACTIVE
RI-ANT-G04E-30
RI-ANT-P02A-00
RI-ANT-P02A-30
RI-ANT-S01C-30
RI-ANT-S02C-00
1
OBSOLETE
ACTIVE
1
1
ACTIVE
OBSOLETE
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 1
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Amplifiers
Applications
Audio
Automotive
Broadband
Digital Control
Medical
Military
Optical Networking
Security
amplifier.ti.com
dataconverter.ti.com
www.dlp.com
www.ti.com/audio
Data Converters
DLP® Products
DSP
Clocks and Timers
Interface
www.ti.com/automotive
www.ti.com/broadband
www.ti.com/digitalcontrol
www.ti.com/medical
www.ti.com/military
www.ti.com/opticalnetwork
www.ti.com/security
www.ti.com/telephony
www.ti.com/video
dsp.ti.com
www.ti.com/clocks
interface.ti.com
logic.ti.com
power.ti.com
microcontroller.ti.com
www.ti-rfid.com
Logic
Power Mgmt
Microcontrollers
RFID
Telephony
Video & Imaging
Wireless
RF/IF and ZigBee® Solutions www.ti.com/lprf
www.ti.com/wireless
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2009, Texas Instruments Incorporated
相关型号：
©2020 ICPDF网 联系我们和版权申明