SN54AHC244 [TI]
OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS; 八路缓冲器/驱动器，具有三态输出
| 型号： | SN54AHC244 |
| 厂家： | 
TEXAS INSTRUMENTS |
| 描述： | OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS |
| 文件： | 总18页 (文件大小：567K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SN54AHC244, SN74AHC244
OCTAL BUFFERS/DRIVERS
WITH 3-STATE OUTPUTS
SCLS226J – OCTOBER 1995 – REVISED JULY 2003
SN54AHC244 . . . J OR W PACKAGE
SN74AHC244 . . . DB, DGV, DW, N, NS, OR PW PACKAGE
(TOP VIEW)
Operating Range 2-V to 5.5-V V
CC
Latch-Up Performance Exceeds 250 mA Per
JESD 17
1OE
1A1
2Y4
1A2
2Y3
1A3
2Y2
1A4
2Y1
GND
V
CC
2OE
1
2
3
4
5
6
7
8
9
10
20
19
description/ordering information
18 1Y1
These octal buffers/drivers are designed
specifically to improve the performance and
density of 3-state memory-address drivers, clock
drivers, and bus-oriented receivers and
transmitters.
17
16
15
14
13
12
11
2A4
1Y2
2A3
1Y3
2A2
1Y4
2A1
The ’AHC244 devices are organized as two 4-bit
buffers/line drivers with separate output-enable
(OE) inputs. When OE is low, the device passes
data from the A inputs to the Y outputs. When OE
is high, the outputs are in the high-impedance
state.
SN54AHC244 . . . FK PACKAGE
(TOP VIEW)
To ensure the high-impedance state during power
up or power down, OE should be tied to V
CC
3
2
1 20 19
18
through a pullup resistor; the minimum value of
the resistor is determined by the current-sinking
capability of the driver.
1Y1
2A4
1Y2
2A3
1Y3
1A2
2Y3
1A3
2Y2
1A4
4
5
6
7
8
17
16
15
14
9 10 11 12 13
ORDERING INFORMATION
ORDERABLE
PART NUMBER
TOP-SIDE
MARKING
†
PACKAGE
T
A
PDIP – N
Tube
SN74AHC244N
SN74AHC244N
Tube
SN74AHC244DW
SN74AHC244DWR
SN74AHC244NSR
SN74AHC244DBR
SN74AHC244PW
SN74AHC244PWR
SOIC – DW
AHC244
Tape and reel
Tape and reel
Tape and reel
Tube
SOP – NS
AHC244
HA244
–40°C to 85°C
SSOP – DB
TSSOP – PW
HA244
Tape and reel
Tape and reel
Tube
TVSOP – DGV
CDIP – J
SN74AHC244DGVR
SNJ54AHC244J
HA244
SNJ54AHC244J
–55°C to 125°C
CFP – W
Tube
SNJ54AHC244W
SNJ54AHC244FK
SNJ54AHC244W
SNJ54AHC244FK
LCCC – FK
Tube
†
Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines
are available at www.ti.com/sc/package.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright 2003, Texas Instruments Incorporated
On products compliant to MIL-PRF-38535, all parameters are tested
unless otherwise noted. On all other products, production
processing does not necessarily include testing of all parameters.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN54AHC244, SN74AHC244
OCTAL BUFFERS/DRIVERS
WITH 3-STATE OUTPUTS
SCLS226J – OCTOBER 1995 – REVISED JULY 2003
FUNCTION TABLE
(each 4-bit buffer/driver)
INPUTS
OUTPUT
Y
OE
A
H
L
L
L
H
L
H
X
Z
logic diagram (positive logic)
1
19
1OE
2OE
2A1
2
18
11
13
15
17
9
7
5
3
1A1
1Y1
1Y2
1Y3
1Y4
2Y1
2Y2
2Y3
2Y4
4
16
14
12
1A2
2A2
2A3
2A4
6
1A3
8
1A4
†
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage range, V
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to 7 V
CC
Input voltage range, V (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to 7 V
I
Output voltage range, V (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to V
+ 0.5 V
O
CC
Input clamp current, I (V < 0) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –20 mA
IK
I
Output clamp current, I
(V < 0 or V > V ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 mA
OK
O O CC
Continuous output current, I (V = 0 to V ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±25 mA
Continuous current through V
Package thermal impedance, θ (see Note 2): DB package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70°C/W
O
O
CC
CC
or GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±50 mA
JA
DGV package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92°C/W
DW package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58°C/W
N package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69°C/W
NS package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60°C/W
PW package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83°C/W
Storage temperature range, T
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to 150°C
stg
†
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
2. The package thermal impedance is calculated in accordance with JESD 51-7.
2
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN54AHC244, SN74AHC244
OCTAL BUFFERS/DRIVERS
WITH 3-STATE OUTPUTS
SCLS226J – OCTOBER 1995 – REVISED JULY 2003
recommended operating conditions (see Note 3)
SN54AHC244 SN74AHC244
UNIT
MIN
MAX
MIN
MAX
V
V
Supply voltage
2
5.5
2
5.5
V
V
CC
V
CC
V
CC
V
CC
V
CC
V
CC
V
CC
= 2 V
1.5
2.1
3.85
1.5
2.1
3.85
High-level input voltage
= 3 V
IH
= 5.5 V
= 2 V
0.5
0.9
0.5
0.9
V
IL
Low-level input voltage
= 3 V
V
= 5.5 V
1.65
5.5
1.65
5.5
V
V
Input voltage
0
0
0
0
V
V
I
Output voltage
V
V
CC
O
CC
V
CC
V
CC
V
CC
V
CC
V
CC
V
CC
V
CC
V
CC
= 2 V
–50
–4
–8
50
4
–50
–4
–8
50
4
A
I
High-level output current
Low-level output current
= 3.3 V ± 0.3 V
= 5 V ± 0.5 V
= 2 V
OH
OL
mA
A
I
= 3.3 V ± 0.3 V
= 5 V ± 0.5 V
= 3.3 V ± 0.3 V
= 5 V ± 0.5 V
mA
8
8
100
20
125
100
20
85
∆t/∆v
Input transition rise or fall rate
Operating free-air temperature
ns/V
T
–55
–40
°C
A
NOTE 3: All unused inputs of the device must be held at V
or GND to ensure proper device operation. Refer to the TI application report,
CC
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
electrical characteristics over recommended operating free-air temperature range (unless
otherwise noted)
T
A
= 25°C
TYP
2
SN54AHC244 SN74AHC244
PARAMETER
TEST CONDITIONS
V
UNIT
CC
MIN
1.9
MAX
MIN
1.9
MAX
MIN
1.9
MAX
2 V
3 V
I
= –50
A
2.9
3
2.9
2.9
OH
4.5 V
3 V
4.4
4.5
4.4
4.4
V
V
V
OH
OL
2.58
3.94
2.48
3.8
2.48
3.8
I
I
= –4 mA
OH
4.5 V
2 V
= –8 mA
OH
0.1
0.1
0.1
0.1
0.1
0.5
0.5
±1*
0.1
0.1
I
= 50
A
3 V
OL
4.5 V
3 V
0.1
0.1
V
0.36
0.36
±0.1
0.44
0.44
±1
I
I
= 4 mA
= 8 mA
OL
4.5 V
0 V to 5.5 V
OL
I
I
I
V = 5.5 V or GND
A
A
I
I
V
= V
or GND,
O
I
CC
V (OE) = V or V
IH
5.5 V
±0.25
±2.5
±2.5
OZ
IL
V = V
or GND,
or GND
I = 0
O
5.5 V
5 V
4
40
40
10
A
pF
pF
CC
I
CC
CC
C
C
V = V
2
10
i
I
V
= V or GND
CC
5 V
3.5
o
O
* On products compliant to MIL-PRF-38535, this parameter is not production tested at V
CC
= 0 V.
3
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN54AHC244, SN74AHC244
OCTAL BUFFERS/DRIVERS
WITH 3-STATE OUTPUTS
SCLS226J – OCTOBER 1995 – REVISED JULY 2003
switching characteristics over recommended operating free-air temperature range,
V
= 3.3 V ± 0.3 V (unless otherwise noted) (see Figure 1)
CC
T
A
= 25°C
TYP
SN54AHC244 SN74AHC244
FROM
(INPUT)
TO
(OUTPUT)
LOAD
CAPACITANCE
PARAMETER
UNIT
ns
MIN
MAX
8.4*
8.4*
MIN
1*
MAX
10*
MIN
1
MAX
10
t
t
t
t
t
t
t
t
t
t
t
t
t
5.8*
PLH
PHL
PZH
PZL
PHZ
PLZ
PLH
PHL
PZH
PZL
PHZ
PLZ
sk(o)
A
Y
Y
Y
Y
Y
Y
C
C
C
C
C
= 15 pF
= 15 pF
= 15 pF
= 50 pF
= 50 pF
L
L
L
L
L
5.8*
1*
10*
1
10
6.6* 10.6*
6.6* 10.6*
1* 12.5*
1* 12.5*
1
12.5
12.5
11
ns
OE
OE
A
1
5*
5*
9.7*
9.7*
11.9
11.9
14.1
14.1
14
1*
1*
1
11*
11*
13.5
13.5
16
1
ns
1
11
8.3
1
13.5
13.5
16
ns
8.3
1
1
9.1
1
1
ns
OE
OE
9.1
1
16
1
16
10.3
10.3
1
16
1
16
C
C
= 50 pF
= 50 pF
ns
ns
L
L
14
1
16
1
16
1.5**
1.5
On products compliant to MIL-PRF-38535, this parameter is not production tested.
On products compliant to MIL-PRF-38535, this parameter does not apply.
switching characteristics over recommended operating free-air temperature range,
V
= 5 V ± 0.5 V (unless otherwise noted) (see Figure 1)
CC
T
A
= 25°C
TYP
3.9*
3.9*
4.7*
4.7*
5*
SN54AHC244 SN74AHC244
FROM
(INPUT)
TO
(OUTPUT)
LOAD
CAPACITANCE
PARAMETER
UNIT
ns
MIN
MAX
5.5*
5.5*
7.3*
7.3*
7.2*
7.2*
7.5
MIN
1*
1*
1*
1*
1*
1*
1
MAX
6.5*
6.5*
8.5*
8.5*
8.5*
8.5*
8.5
MIN
1
MAX
6.5
t
t
t
t
t
t
t
t
t
t
t
t
t
PLH
PHL
PZH
PZL
PHZ
PLZ
PLH
PHL
PZH
PZL
PHZ
PLZ
sk(o)
A
Y
Y
Y
Y
Y
Y
C
C
C
C
C
= 15 pF
= 15 pF
= 15 pF
= 50 pF
= 50 pF
L
L
L
L
L
1
6.5
1
8.5
ns
OE
OE
A
1
8.5
1
8.5
ns
5*
1
8.5
5.4
1
8.5
ns
5.4
7.5
1
8.5
1
8.5
6.2
9.3
1
10.5
10.5
10.5
10.5
1
10.5
10.5
10.5
10.5
1
ns
OE
OE
6.2
9.3
1
1
6.7
9.2
1
1
C
C
= 50 pF
= 50 pF
ns
ns
L
L
6.7
9.2
1
1
1**
On products compliant to MIL-PRF-38535, this parameter is not production tested.
On products compliant to MIL-PRF-38535, this parameter does not apply.
4
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN54AHC244, SN74AHC244
OCTAL BUFFERS/DRIVERS
WITH 3-STATE OUTPUTS
SCLS226J – OCTOBER 1995 – REVISED JULY 2003
noise characteristics, V
= 5 V, C = 50 pF, T = 25°C (see Note 4)
CC
L
A
SN74AHC244
UNIT
PARAMETER
MIN
TYP
MAX
V
V
V
V
V
Quiet output, maximum dynamic V
0.5
V
V
V
V
V
OL(P)
OL(V)
OH(V)
IH(D)
IL(D)
OL
Quiet output, minimum dynamic V
Quiet output, minimum dynamic V
High-level dynamic input voltage
Low-level dynamic input voltage
–0.2
4.8
OL
OH
3.5
1.5
NOTE 4: Characteristics are for surface-mount packages only.
operating characteristics, V
= 5 V, T = 25°C
A
CC
PARAMETER
TEST CONDITIONS
No load, f = 1 MHz
TYP
UNIT
C
Power dissipation capacitance
8.6
pF
pd
5
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN54AHC244, SN74AHC244
OCTAL BUFFERS/DRIVERS
WITH 3-STATE OUTPUTS
SCLS226J – OCTOBER 1995 – REVISED JULY 2003
PARAMETER MEASUREMENT INFORMATION
V
CC
Open
GND
S1
R
= 1 kΩ
L
TEST
S1
From Output
Under Test
Test
Point
From Output
Under Test
t
t
/t
Open
PLH PHL
/t
C
C
L
t
V
CC
L
PLZ PZL
/t
(see Note A)
(see Note A)
GND
PHZ PZH
Open Drain
V
CC
LOAD CIRCUIT FOR
LOAD CIRCUIT FOR
TOTEM-POLE OUTPUTS
3-STATE AND OPEN-DRAIN OUTPUTS
V
CC
50% V
CC
Timing Input
0 V
t
w
t
h
t
su
V
CC
V
CC
50% V
50% V
CC
Input
CC
50% V
50% V
CC
Data Input
CC
0 V
0 V
VOLTAGE WAVEFORMS
PULSE DURATION
VOLTAGE WAVEFORMS
SETUP AND HOLD TIMES
V
V
CC
CC
Output
Control
50% V
50% V
50% V
50% V
t
Input
CC
CC
CC
CC
0 V
0 V
t
t
t
t
PZL
PLZ
PLH
PHL
Output
Waveform 1
V
OH
≈V
CC
In-Phase
Output
50% V
50% V
CC
50% V
CC
CC
V
S1 at V
(see Note B)
V
OL
+ 0.3 V
CC
V
OL
OL
t
t
t
PHL
PLH
PZH
PHZ
Output
Waveform 2
S1 at GND
V
V
OH
OH
Out-of-Phase
Output
V
OH
– 0.3 V
50% V
50% V
50% V
CC
CC
CC
V
≈0 V
(see Note B)
OL
VOLTAGE WAVEFORMS
PROPAGATION DELAY TIMES
INVERTING AND NONINVERTING OUTPUTS
VOLTAGE WAVEFORMS
ENABLE AND DISABLE TIMES
LOW- AND HIGH-LEVEL ENABLING
NOTES: A. includes probe and jig capacitance.
C
L
B. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control.
C. All input pulses are supplied by generators having the following characteristics: PRR ≤ 1 MHz, Z = 50 Ω, t ≤ 3 ns, t ≤ 3 ns.
O
r
f
D. The outputs are measured one at a time with one input transition per measurement.
E. All parameters and waveforms are not applicable to all devices.
Figure 1. Load Circuit and Voltage Waveforms
6
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
PACKAGE OPTION ADDENDUM
www.ti.com
28-Feb-2005
PACKAGING INFORMATION
Orderable Device
Status (1)
Package Package
Pins Package Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
Qty
Type
LCCC
CDIP
CFP
Drawing
5962-9678201Q2A
5962-9678201QRA
5962-9678201QSA
5962-9678201SA
5962-9678201VRA
5962-9678201VSA
SN74AHC244DBLE
SN74AHC244DBR
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
OBSOLETE
ACTIVE
FK
J
20
20
20
20
20
20
20
20
1
1
1
None
None
None
None
None
None
None
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Level-NC-NC-NC
Level-NC-NC-NC
Level-NC-NC-NC
Call TI
W
W
J
CFP
CDIP
CFP
1
1
Level-NC-NC-NC
Level-NC-NC-NC
Call TI
W
DB
DB
SSOP
SSOP
2000
2000
25
Pb-Free
(RoHS)
CU NIPDAU Level-2-260C-1 YEAR/
Level-1-235C-UNLIM
SN74AHC244DGVR
SN74AHC244DW
SN74AHC244DWR
SN74AHC244N
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
TVSOP
SOIC
SOIC
PDIP
DGV
DW
DW
N
20
20
20
20
20
20
Pb-Free
(RoHS)
CU NIPDAU Level-1-250C-UNLIM
Pb-Free
(RoHS)
CU NIPDAU Level-2-250C-1 YEAR/
Level-1-235C-UNLIM
2000
20
Pb-Free
(RoHS)
CU NIPDAU Level-2-250C-1 YEAR/
Level-1-235C-UNLIM
Pb-Free
(RoHS)
CU NIPDAU Level-NC-NC-NC
SN74AHC244NSR
SN74AHC244PW
SO
NS
2000
70
Pb-Free
(RoHS)
CU NIPDAU Level-2-260C-1 YEAR/
Level-1-235C-UNLIM
TSSOP
PW
Pb-Free
(RoHS)
CU NIPDAU Level-1-250C-UNLIM
SN74AHC244PWLE
SN74AHC244PWR
OBSOLETE TSSOP
PW
PW
20
20
None
Call TI
Call TI
ACTIVE
TSSOP
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SNJ54AHC244FK
SNJ54AHC244J
SNJ54AHC244W
ACTIVE
ACTIVE
ACTIVE
LCCC
CDIP
CFP
FK
J
20
20
20
1
1
1
None
None
None
Call TI
Call TI
Call TI
Level-NC-NC-NC
Level-NC-NC-NC
Level-NC-NC-NC
W
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - May not be currently available - please check http://www.ti.com/productcontent for the latest availability information and additional
product content details.
None: Not yet available Lead (Pb-Free).
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Green (RoHS & no Sb/Br): TI defines "Green" to mean "Pb-Free" and in addition, uses package materials that do not contain halogens,
including bromine (Br) or antimony (Sb) above 0.1% of total product weight.
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDECindustry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
28-Feb-2005
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 2
MECHANICAL DATA
MLCC006B – OCTOBER 1996
FK (S-CQCC-N**)
LEADLESS CERAMIC CHIP CARRIER
28 TERMINAL SHOWN
A
B
NO. OF
TERMINALS
**
18 17 16 15 14 13 12
MIN
MAX
MIN
MAX
0.342
(8,69)
0.358
(9,09)
0.307
(7,80)
0.358
(9,09)
19
20
11
10
9
20
28
44
52
68
84
0.442
(11,23)
0.458
(11,63)
0.406
(10,31)
0.458
(11,63)
21
B SQ
22
0.640
(16,26)
0.660
(16,76)
0.495
(12,58)
0.560
(14,22)
8
A SQ
23
0.739
(18,78)
0.761
(19,32)
0.495
(12,58)
0.560
(14,22)
7
24
25
6
0.938
(23,83)
0.962
(24,43)
0.850
(21,6)
0.858
(21,8)
5
1.141
(28,99)
1.165
(29,59)
1.047
(26,6)
1.063
(27,0)
26 27 28
1
2
3
4
0.080 (2,03)
0.064 (1,63)
0.020 (0,51)
0.010 (0,25)
0.020 (0,51)
0.010 (0,25)
0.055 (1,40)
0.045 (1,14)
0.045 (1,14)
0.035 (0,89)
0.045 (1,14)
0.035 (0,89)
0.028 (0,71)
0.022 (0,54)
0.050 (1,27)
4040140/D 10/96
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. This package can be hermetically sealed with a metal lid.
D. The terminals are gold plated.
E. Falls within JEDEC MS-004
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MECHANICAL DATA
MPDS006C – FEBRUARY 1996 – REVISED AUGUST 2000
DGV (R-PDSO-G**)
PLASTIC SMALL-OUTLINE
24 PINS SHOWN
0,23
0,13
M
0,07
0,40
24
13
0,16 NOM
4,50
4,30
6,60
6,20
Gage Plane
0,25
0°–ā8°
0,75
1
12
0,50
A
Seating Plane
0,08
0,15
0,05
1,20 MAX
PINS **
14
16
20
24
38
48
56
DIM
A MAX
A MIN
3,70
3,50
3,70
3,50
5,10
4,90
5,10
4,90
7,90
7,70
9,80
9,60
11,40
11,20
4073251/E 08/00
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion, not to exceed 0,15 per side.
D. Falls within JEDEC: 24/48 Pins – MO-153
14/16/20/56 Pins – MO-194
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MECHANICAL DATA
MSSO002E – JANUARY 1995 – REVISED DECEMBER 2001
DB (R-PDSO-G**)
PLASTIC SMALL-OUTLINE
28 PINS SHOWN
0,38
0,22
0,65
28
M
0,15
15
0,25
0,09
5,60
5,00
8,20
7,40
Gage Plane
1
14
0,25
A
0°–ā8°
0,95
0,55
Seating Plane
0,10
2,00 MAX
0,05 MIN
PINS **
14
16
20
24
28
30
38
DIM
6,50
5,90
6,50
5,90
7,50
8,50
7,90
10,50
9,90
10,50 12,90
A MAX
A MIN
6,90
9,90
12,30
4040065 /E 12/01
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion not to exceed 0,15.
D. Falls within JEDEC MO-150
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MECHANICAL DATA
MTSS001C – JANUARY 1995 – REVISED FEBRUARY 1999
PW (R-PDSO-G**)
PLASTIC SMALL-OUTLINE PACKAGE
14 PINS SHOWN
0,30
0,19
M
0,10
0,65
14
8
0,15 NOM
4,50
4,30
6,60
6,20
Gage Plane
0,25
1
7
0°–8°
A
0,75
0,50
Seating Plane
0,10
0,15
0,05
1,20 MAX
PINS **
8
14
16
20
24
28
DIM
3,10
2,90
5,10
4,90
5,10
4,90
6,60
6,40
7,90
9,80
9,60
A MAX
A MIN
7,70
4040064/F 01/97
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion not to exceed 0,15.
D. Falls within JEDEC MO-153
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,
enhancements, improvements, and other changes to its products and services at any time and to discontinue
any product or service without notice. Customers should obtain the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to TI’s terms
and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI
deems necessary to support this warranty. Except where mandated by government requirements, testing of all
parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for
their products and applications using TI components. To minimize the risks associated with customer products
and applications, customers should provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,
copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process
in which TI products or services are used. Information published by TI regarding third-party products or services
does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.
Use of such information may require a license from a third party under the patents or other intellectual property
of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction
of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for
such altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that
product or service voids all express and any implied warranties for the associated TI product or service and
is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Following are URLs where you can obtain information on other Texas Instruments products and application
solutions:
Products
Applications
Audio
Amplifiers
amplifier.ti.com
www.ti.com/audio
Data Converters
dataconverter.ti.com
Automotive
www.ti.com/automotive
DSP
dsp.ti.com
Broadband
Digital Control
Military
www.ti.com/broadband
www.ti.com/digitalcontrol
www.ti.com/military
Interface
Logic
interface.ti.com
logic.ti.com
Power Mgmt
Microcontrollers
power.ti.com
Optical Networking
Security
www.ti.com/opticalnetwork
www.ti.com/security
www.ti.com/telephony
www.ti.com/video
microcontroller.ti.com
Telephony
Video & Imaging
Wireless
www.ti.com/wireless
Mailing Address:
Texas Instruments
Post Office Box 655303 Dallas, Texas 75265
Copyright 2005, Texas Instruments Incorporated
相关型号：
©2020 ICPDF网 联系我们和版权申明