SN54HC595_09 [TI]
8-BIT SHIFT REGISTERS WITH 3-STATE OUTPUT REGISTERS; 8位移位寄存器具有三态输出寄存器
| 型号： | SN54HC595_09 |
| 厂家： | 
TEXAS INSTRUMENTS |
| 描述： | 8-BIT SHIFT REGISTERS WITH 3-STATE OUTPUT REGISTERS |
| 文件： | 总25页 (文件大小：846K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SN54HC595
SN74HC595
www.ti.com
SCLS041H –DECEMBER 1982–REVISED NOVEMBER 2009
8-BIT SHIFT REGISTERS WITH 3-STATE OUTPUT REGISTERS
Check for Samples: SN54HC595 SN74HC595
1
FEATURES
SN54HC595...J OR W PACKAGE
SN74HC595...D, DB, DW, N, NS, OR PW PACKAGE
(TOP VIEW)
•
•
•
8-Bit Serial-In, Parallel-Out Shift
Wide Operating Voltage Range of 2 V to 6 V
High-Current 3-State Outputs Can Drive Up To
15 LSTTL Loads
Q
Q
V
CC
1
2
3
4
5
6
7
8
16
15
14
13
B
Q
C
D
A
•
•
•
•
•
Low Power Consumption: 80-μA (Max) ICC
tpd = 13 ns (Typ)
Q
SER
OE
Q
E
Q
Q
12 RCLK
F
±6-mA Output Drive at 5 V
11
10
9
SRCLK
SRCLR
G
Low Input Current: 1 μA (Max)
Shift Register Has Direct Clear
Q
H
GND
Q ′
H
DESCRIPTION
SN54HC595...FK PACKAGE
(TOP VIEW)
The 'HC595 devices contain an 8-bit serial-in,
parallel-out shift register that feeds an 8-bit D-type
storage register. The storage register has parallel
3-state outputs. Separate clocks are provided for both
the shift and storage register. The shift register has a
direct overriding clear (SRCLR) input, serial (SER)
input, and serial outputs for cascading. When the
output-enable (OE) input is high, the outputs are in
the high-impedance state.
3
2
1
2 0 1 9
18
SER
OE
Q
4
5
6
7
8
D
Q
17
16
E
NC
NC
15 RCLK
Q
F
14
9 10 11 12 1 3
Both the shift register clock (SRCLK) and storage
register clock (RCLK) are positive-edge triggered. If
both clocks are connected together, the shift register
always is one clock pulse ahead of the storage
register.
SRCLK
Q
G
NC – No internal connection
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Copyright © 1982–2009, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
SN54HC595
SN74HC595
SCLS041H –DECEMBER 1982–REVISED NOVEMBER 2009
www.ti.com
ORDERING INFORMATION(1)
(2)
TA
PACKAGE
ORDERABLE PART NUMBER
TOP-SIDE MARKING
SN74HC595N
PDIP − N
SOIC − D
Tube of 25
Tube of 40
Reel of 2500
Reel of 250
Tube of 40
Reel of 2000
Reel of 2000
Reel of 2000
Tube of 90
Reel of 2000
Tube of 25
Tube of 150
Tube of 55
SN74HC595N
SN74HC595D
SN74HC595DR
SN74HC595DT
HC595
SN74HC595DW
SN74HC595DWR
SN74HC595NSR
SN74HC595DBR
SN74HC595PW
SN74HC595PWR
SNJ54HC595J
–40°C to 85°C
SOIC − DW
HC595
SOP − NS
HC595
HC595
SSOP − DB
TSSOP – PW
HC595
CDIP − J
CFP − W
LCCC − FK
SNJ54HC595J
SNJ54HC595W
SNJ54HC595FK
–55°C to 125°C
SNJ54HC595W
SNJ54HC595FK
(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
web site at www.ti.com.
(2) Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.
Table 1. FUNCTION TABLE
INPUTS
FUNCTION
SER
X
SRCLK
SRCLR
RCLK
OE
H
X
X
X
X
X
L
X
X
X
Outputs QA−QH are disabled.
Outputs QA−QH are enabled.
Shift register is cleared.
X
L
X
X
First stage of the shift register goes low.
Other stages store the data of previous stage, respectively.
L
↑
H
X
X
First stage of the shift register goes high.
Other stages store the data of previous stage, respectively.
H
X
↑
H
X
X
X
X
X
↑
Shift-register data is stored in the storage register.
2
Submit Documentation Feedback
Copyright © 1982–2009, Texas Instruments Incorporated
Product Folder Link(s): SN54HC595 SN74HC595
SN54HC595
SN74HC595
www.ti.com
SCLS041H –DECEMBER 1982–REVISED NOVEMBER 2009
LOGIC DIAGRAM (POSITIVE LOGIC)
13
12
OE
RCLK
10
11
14
SRCLR
SRCLK
SER
1D
C1
3R
C3
15
Q
A
R
3S
2S
2R
3R
1
Q
C2
C3
B
R
3S
2S
2R
3R
2
C2
C3
Q
C
R
3S
2S
2R
3R
3
Q
C2
C3
D
R
3S
2S
2R
3R
4
Q
Q
Q
C2
C3
E
R
3S
2S
2R
3R
5
C2
C3
F
R
3S
2S
2R
3R
6
C2
C3
G
R
3S
2S
2R
3R
7
9
Q
Q
C2
C3
3S
H
R
H′
Pin numbers shown are for the D, DB, DW, J, N, NS, PW, and W packages.
Copyright © 1982–2009, Texas Instruments Incorporated
Submit Documentation Feedback
3
Product Folder Link(s): SN54HC595 SN74HC595
SN54HC595
SN74HC595
SCLS041H –DECEMBER 1982–REVISED NOVEMBER 2009
www.ti.com
TIMING DIAGRAM
SRCLK
SER
RCLK
SRCLR
OE
Q
A
Q
B
Q
C
Q
D
Q
E
Q
F
Q
G
Q
H
Q
H’
NOTE:
implies that the output is in 3-State mode.
4
Submit Documentation Feedback
Copyright © 1982–2009, Texas Instruments Incorporated
Product Folder Link(s): SN54HC595 SN74HC595
SN54HC595
SN74HC595
www.ti.com
SCLS041H –DECEMBER 1982–REVISED NOVEMBER 2009
ABSOLUTE MAXIMUM RATINGS(1)
over operating free-air temperature range (unless otherwise noted)
VCC
Supply voltage range
Input clamp current(2)
Output clamp current
−0.5 V to 7 V
IIK
VI < 0 or VI > VCC
±20 mA
±20 mA
(2)
IOK
IO
VO < 0 or VO > VCC
VO = 0 to VCC
Continuous output current
±35 mA
Continuous current through VCC or GND
±70 mA
D package
73°C/W
DB package
DW package
N package
82°C/W
57°C/W
θJA
Package thermal impedance(3)
67°C/W
NS package
PW package
64°C/W
108°C/W
−65°C to 150°C
Tstg
Storage temperature range
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating
conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
(3) The package thermal impedance is calculated in accordance with JESD 51-7.
RECOMMENDED OPERATING CONDITIONS(1)
SN54HC595
SN74HC595
UNIT
MIN
NOM
MAX
MIN
NOM
MAX
VCC
Supply voltage
2
1.5
5
6
2
1.5
5
6
V
VCC = 2 V
VCC = 4.5 V
VCC = 6 V
VCC = 2 V
VCC = 4.5 V
VCC = 6 V
VIH
High-level input voltage
3.15
4.2
3.15
4.2
V
V
0.5
1.35
1.8
0.5
1.35
1.8
VIL
Low-level input voltage
VI
Input voltage
0
0
VCC
VCC
1000
500
400
125
0
0
VCC
VCC
1000
500
400
85
V
V
VO
Output voltage
VCC = 2 V
VCC = 4.5 V
VCC = 6 V
Δt/Δv Input transition rise/fall time(2)
ns
°C
TA
Operating free-air temperature
–55
–40
(1) All unused inputs of the device must be held at VCC or GND to ensure proper device operation. See the TI application report,
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
(2) If this device is used in the threshold region (from VILmax = 0.5 V to VIHmin = 1.5 V), there is a potential to go into the wrong state from
induced grounding, causing double clocking. Operating with the inputs at tt = 1000 ns and VCC = 2 V does not damage the device;
however, functionally, the CLK inputs are not ensured while in the shift, count, or toggle operating modes.
Copyright © 1982–2009, Texas Instruments Incorporated
Submit Documentation Feedback
5
Product Folder Link(s): SN54HC595 SN74HC595
SN54HC595
SN74HC595
SCLS041H –DECEMBER 1982–REVISED NOVEMBER 2009
www.ti.com
ELECTRICAL CHARACTERISTICS
over recommended operating free-air temperature range (unless otherwise noted)
TA = 25°C
SN54HC595
SN74HC595
PARAMETER
TEST CONDITIONS
VCC
UNIT
MIN
TYP
MAX
MIN
1.9
4.4
5.9
3.7
3.7
5.2
5.2
MAX
MIN
1.9
MAX
2 V
4.5 V
6 V
1.9 1.998
4.4 4.499
5.9 5.999
IOH = −20 μA
4.4
5.9
VOH
VI = VIH or VIL
QH′, IOH = −4 mA
3.98
4.3
4.3
3.84
3.84
5.34
5.34
V
4.5 V
6 V
QA−QH, IOH = −6 mA
QH′, IOH = −5.2 mA
QA−QH, IOH = −7.8 mA
3.98
5.48
5.48
5.8
5.8
2 V
4.5 V
6 V
0.002
0.001
0.001
0.17
0.17
0.15
0.15
±0.1
±0.01
0.1
0.1
0.1
0.1
0.1
0.1
IOL = 20 μA
0.1
0.1
0.1
VOL
VI = VIH or VIL
QH′, IOL = 4 mA
0.26
0.26
0.26
0.26
±100
±0.5
8
0.4
0.33
0.33
0.33
0.33
±1000
±5
V
4.5 V
6 V
QA−QH, IOL = 6 mA
QH′, IOL = 5.2 mA
QA−QH, IOL = 7.8 mA
0.4
0.4
0.4
II
VI = VCC or 0
6 V
6 V
6 V
±1000
±10
160
nA
µA
µA
IOZ
ICC
VO = VCC or 0, QA−QH
VI = VCC or 0, IO = 0
80
2 V
to 6 V
Ci
3
10
10
10
pF
6
Submit Documentation Feedback
Copyright © 1982–2009, Texas Instruments Incorporated
Product Folder Link(s): SN54HC595 SN74HC595
SN54HC595
SN74HC595
www.ti.com
SCLS041H –DECEMBER 1982–REVISED NOVEMBER 2009
TIMING REQUIREMENTS
over operating free-air temperature range (unless otherwise noted)
TA = 25°C
SN54HC595
SN74HC595
VCC
UNIT
MIN
MAX
MIN
MAX
MIN
MAX
2 V
4.5 V
6 V
6
31
36
4.2
21
25
5
fclock
Clock frequency
Pulse duration
25 MHz
29
2 V
80
16
14
80
16
14
100
20
17
75
15
13
50
10
9
120
24
20
120
24
20
150
30
25
113
23
19
75
15
13
75
15
13
0
100
20
17
100
20
17
125
25
21
94
19
16
65
13
11
60
12
11
0
SRCLK or RCLK high or low
SRCLR low
4.5 V
6 V
tw
ns
2 V
4.5 V
6 V
2 V
SER before SRCLK↑
4.5 V
6 V
2 V
SRCLK↑ before RCLK↑(1)
SRCLR low before RCLK↑
SRCLR high (inactive) before SRCLK↑
4.5 V
6 V
tsu
Setup time
ns
2 V
4.5 V
6 V
2 V
50
10
9
4.5 V
6 V
2 V
0
th
Hold time, SER after SRCLK↑
4.5 V
6 V
0
0
0
ns
0
0
0
(1) This setup time allows the storage register to receive stable data from the shift register. The clocks can be tied together, in which case
the shift register is one clock pulse ahead of the storage register.
Copyright © 1982–2009, Texas Instruments Incorporated
Submit Documentation Feedback
7
Product Folder Link(s): SN54HC595 SN74HC595
SN54HC595
SN74HC595
SCLS041H –DECEMBER 1982–REVISED NOVEMBER 2009
www.ti.com
SWITCHING CHARACTERISTICS
over recommended operating free-air temperature range, CL = 50 pF (unless otherwise noted)
TA = 25°C
TYP
26
38
42
50
17
14
50
17
14
51
18
15
40
15
13
42
23
20
28
8
SN54HC595
SN74HC595
FROM
(INPUT)
TO
(OUTPUT)
PARAMETER
VCC
UNIT
MIN
6
MAX
MIN
4.2
21
MAX
MIN
5
MAX
2 V
4.5 V
6 V
fmax
31
36
25
29
MHz
25
2 V
160
32
240
48
200
40
SRCLK
RCLK
SRCLR
OE
QH′
4.5 V
6 V
27
41
34
tpd
ns
2 V
150
30
225
45
187
37
QA−QH
4.5 V
6 V
26
38
32
2 V
175
35
261
52
219
44
tPHL
QH′
4.5 V
6 V
ns
ns
ns
30
44
37
2 V
150
30
255
45
187
37
ten
QA−QH
QA−QH
QA−QH
QH′
4.5 V
6 V
26
38
32
2 V
200
40
300
60
250
50
tdis
OE
4.5 V
6 V
34
51
43
2 V
60
90
75
4.5 V
6 V
12
18
15
6
10
15
13
tt
ns
2 V
28
8
75
110
22
95
4.5 V
6 V
15
19
6
13
19
16
SWITCHING CHARACTERISTICS
over recommended operating free-air temperature range, CL = 150 pF (unless otherwise noted)
TA = 25°C
SN54HC595
SN74HC595
MIN MAX
FROM
(INPUT)
TO
(OUTPUT)
PARAMETER
VCC
UNIT
MIN
TYP
60
22
19
70
23
19
45
17
13
MAX
200
40
MIN
MAX
300
60
2 V
4.5 V
6 V
250
50
tpd
RCLK
OE
QA−QH
QA−QH
QA−QH
ns
34
51
43
2 V
200
40
298
60
250
50
ten
4.5 V
6 V
ns
ns
34
51
43
2 V
210
42
315
63
265
53
tt
4.5 V
6 V
36
53
45
OPERATING CHARACTERISTICS
TA = 25°C
PARAMETER
TEST CONDITIONS
No load
TYP UNIT
400 pF
Cpd
Power dissipation capacitance
8
Submit Documentation Feedback
Copyright © 1982–2009, Texas Instruments Incorporated
Product Folder Link(s): SN54HC595 SN74HC595
SN54HC595
SN74HC595
www.ti.com
SCLS041H –DECEMBER 1982–REVISED NOVEMBER 2009
PARAMETER MEASUREMENT INFORMATION
V
CC
PARAMETER
R
C
L
S1
S2
L
50 pF
or
150 pF
t
Open
Closed
Closed
Open
S1
S2
PZH
Test
Point
t
1 kΩ
1 kΩ
en
R
t
L
PZL
From Output
Under Test
t
Open
Closed
Open
PHZ
C
(see Note A)
L
t
50 pF
dis
t
Closed
PLZ
50 pF
or
150 pF
t
or t
Open
Open
pd
t
LOAD CIRCUIT
V
CC
Reference
Input
50%
V
CC
0 V
V
High-Level
Pulse
50%
50%
t
t
h
su
0 V
V
CC
t
Data
Input
w
90%
t
90%
50%
10%
50%
10%
CC
Low-Level
Pulse
0 V
50%
50%
t
f
r
0 V
VOLTAGE WAVEFORMS
SETUP AND HOLD AND INPUT RISE AND FALL TIMES
VOLTAGE WAVEFORMS
PULSE DURATIONS
Output
V
CC
V
CC
Control
(Low-Level
Enabling)
Input
50%
50%
t
50%
50%
0 V
V
0 V
t
PLH
PHL
t
t
PLZ
PZL
OH
≈V
CC
50%
≈V
Output
Waveform 1
(See Note B)
In-Phase
Output
CC
90%
t
90%
50%
10%
50%
10%
10%
t
V
OL
V
OL
t
r
f
f
t
t
t
PLH
PZH
PHZ
PHL
90%
V
V
OH
V
Output
Waveform 2
(See Note B)
OH
90%
t
90%
Out-of-
Phase
Output
50%
10%
50%
10%
50%
≈0 V
OL
t
r
VOLTAGE WAVEFORMS
ENABLE AND DISABLE TIMES FOR 3-STATE OUTPUTS
VOLTAGE WAVEFORMS
PROPAGATION DELAY AND OUTPUT TRANSITION TIMES
NOTES: A.
C includes probe and test-fixture capacitance.
L
B. Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control.
C. Phase relationships between waveforms were chosen arbitrarily. All input pulses are supplied by generators having the following
characteristics: PRR ≤ 1 MHz, Z = 50 Ω, t = 6 ns, t = 6 ns.
O
r
f
D. For clock inputs, f
is measured when the input duty cycle is 50%.
max
E. The outputs are measured one at a time, with one input transition per measurement.
F.
G.
H.
t
t
t
and t
and t
are the same as t
.
dis
PLZ
PZL
PLH
PHZ
PZH
are the same as t .
en
are the same as t .
and t
PHL
pd
Figure 1. Load Circuit and Voltage Waveforms
Copyright © 1982–2009, Texas Instruments Incorporated
Submit Documentation Feedback
9
Product Folder Link(s): SN54HC595 SN74HC595
PACKAGE OPTION ADDENDUM
www.ti.com
27-May-2010
PACKAGING INFORMATION
Status (1)
Eco Plan (2)
MSL Peak Temp (3)
Samples
Orderable Device
Package Type Package
Drawing
Pins
Package Qty
Lead/
Ball Finish
(Requires Login)
Purchase Samples
Purchase Samples
Purchase Samples
Purchase Samples
5962-86816012A
5962-8681601EA
5962-8681601VEA
5962-8681601VFA
SN54HC595J
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
LCCC
CDIP
CDIP
CFP
FK
J
20
16
16
16
16
1
1
1
1
1
TBD
TBD
TBD
TBD
TBD
POST-PLATE N / A for Pkg Type
A42
A42
A42
A42
N / A for Pkg Type
N / A for Pkg Type
N / A for Pkg Type
N / A for Pkg Type
J
W
J
CDIP
Contact TI Distributor
or Sales Office
SN74HC595D
SN74HC595DBR
SN74HC595DBRE4
SN74HC595DBRG4
SN74HC595DE4
SN74HC595DG4
SN74HC595DR
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
SOIC
SSOP
SSOP
SSOP
SOIC
SOIC
SOIC
SOIC
D
DB
DB
DB
D
16
16
16
16
16
16
16
16
40
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
CU NIPDAU Level-1-260C-UNLIM
CU NIPDAU Level-1-260C-UNLIM
CU NIPDAU Level-1-260C-UNLIM
CU NIPDAU Level-1-260C-UNLIM
CU NIPDAU Level-1-260C-UNLIM
CU NIPDAU Level-1-260C-UNLIM
CU NIPDAU Level-1-260C-UNLIM
Purchase Samples
Purchase Samples
Purchase Samples
Purchase Samples
Purchase Samples
Purchase Samples
2000
2000
2000
40
Green (RoHS
& no Sb/Br)
Green (RoHS
& no Sb/Br)
Green (RoHS
& no Sb/Br)
Green (RoHS
& no Sb/Br)
D
40
Green (RoHS
& no Sb/Br)
D
2500
2500
Green (RoHS
& no Sb/Br)
Contact TI Distributor
or Sales Office
SN74HC595DRE4
D
Green (RoHS
& no Sb/Br)
Contact TI Distributor
or Sales Office
SN74HC595DRG3
SN74HC595DRG4
PREVIEW
ACTIVE
SOIC
SOIC
D
D
16
16
2500
2500
TBD
Call TI
Call TI
Samples Not Available
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
CU NIPDAU Level-1-260C-UNLIM
CU NIPDAU Level-1-260C-UNLIM
CU NIPDAU Level-1-260C-UNLIM
CU NIPDAU Level-1-260C-UNLIM
Contact TI Distributor
or Sales Office
SN74HC595DT
SN74HC595DTE4
SN74HC595DTG4
SN74HC595DW
ACTIVE
ACTIVE
ACTIVE
ACTIVE
SOIC
SOIC
SOIC
SOIC
D
D
16
16
16
16
250
250
250
40
Green (RoHS
& no Sb/Br)
Purchase Samples
Purchase Samples
Purchase Samples
Purchase Samples
Green (RoHS
& no Sb/Br)
D
Green (RoHS
& no Sb/Br)
DW
Green (RoHS
& no Sb/Br)
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
27-May-2010
Status (1)
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
Eco Plan (2)
MSL Peak Temp (3)
Samples
Orderable Device
Package Type Package
Drawing
Pins
Package Qty
Lead/
Ball Finish
(Requires Login)
SN74HC595DWE4
SN74HC595DWG4
SN74HC595DWR
SN74HC595DWRE4
SN74HC595DWRG4
SN74HC595N
SOIC
SOIC
SOIC
SOIC
SOIC
PDIP
DW
DW
DW
DW
DW
N
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
20
16
40
40
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
Purchase Samples
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
CU NIPDAU Level-1-260C-UNLIM
CU NIPDAU Level-1-260C-UNLIM
CU NIPDAU Level-1-260C-UNLIM
CU NIPDAU N / A for Pkg Type
CU NIPDAU N / A for Pkg Type
CU NIPDAU Level-1-260C-UNLIM
CU NIPDAU Level-1-260C-UNLIM
CU NIPDAU Level-1-260C-UNLIM
CU NIPDAU Level-1-260C-UNLIM
CU NIPDAU Level-1-260C-UNLIM
CU NIPDAU Level-1-260C-UNLIM
CU NIPDAU Level-1-260C-UNLIM
CU NIPDAU Level-1-260C-UNLIM
CU NIPDAU Level-1-260C-UNLIM
POST-PLATE N / A for Pkg Type
Purchase Samples
2000
2000
2000
25
Green (RoHS
& no Sb/Br)
Contact TI Distributor
or Sales Office
Green (RoHS
& no Sb/Br)
Contact TI Distributor
or Sales Office
Green (RoHS
& no Sb/Br)
Contact TI Distributor
or Sales Office
Pb-Free (RoHS)
Contact TI Distributor
or Sales Office
SN74HC595NE4
SN74HC595NSR
SN74HC595NSRE4
SN74HC595NSRG4
SN74HC595PW
PDIP
N
25
Pb-Free (RoHS)
Contact TI Distributor
or Sales Office
SO
NS
NS
NS
PW
PW
PW
PW
PW
PW
FK
2000
2000
2000
90
Green (RoHS
& no Sb/Br)
Purchase Samples
Purchase Samples
Purchase Samples
Purchase Samples
Purchase Samples
Purchase Samples
SO
Green (RoHS
& no Sb/Br)
SO
Green (RoHS
& no Sb/Br)
TSSOP
TSSOP
TSSOP
TSSOP
TSSOP
TSSOP
LCCC
CDIP
Green (RoHS
& no Sb/Br)
SN74HC595PWE4
SN74HC595PWG4
SN74HC595PWR
SN74HC595PWRE4
SN74HC595PWRG4
SNJ54HC595FK
90
Green (RoHS
& no Sb/Br)
90
Green (RoHS
& no Sb/Br)
2000
2000
2000
1
Green (RoHS
& no Sb/Br)
Contact TI Distributor
or Sales Office
Green (RoHS
& no Sb/Br)
Contact TI Distributor
or Sales Office
Green (RoHS
& no Sb/Br)
Contact TI Distributor
or Sales Office
TBD
Contact TI Distributor
or Sales Office
SNJ54HC595J
J
1
TBD
A42
N / A for Pkg Type
Contact TI Distributor
or Sales Office
Addendum-Page 2
PACKAGE OPTION ADDENDUM
www.ti.com
27-May-2010
Status (1)
Eco Plan (2)
MSL Peak Temp (3)
Samples
Orderable Device
Package Type Package
Drawing
Pins
Package Qty
Lead/
Ball Finish
(Requires Login)
SNJ54HC595W
OBSOLETE
16
TBD
Call TI
Call TI
Samples Not Available
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
OTHER QUALIFIED VERSIONS OF SN54HC595, SN54HC595-SP, SN74HC595 :
Catalog: SN74HC595, SN54HC595
•
Enhanced Product: SN74HC595-EP, SN74HC595-EP
•
Military: SN54HC595
•
Space: SN54HC595-SP
•
Addendum-Page 3
PACKAGE OPTION ADDENDUM
www.ti.com
27-May-2010
NOTE: Qualified Version Definitions:
Catalog - TI's standard catalog product
•
•
•
•
Enhanced Product - Supports Defense, Aerospace and Medical Applications
Military - QML certified for Military and Defense Applications
Space - Radiation tolerant, ceramic packaging and qualified for use in Space-based application
Addendum-Page 4
PACKAGE MATERIALS INFORMATION
www.ti.com
13-Oct-2009
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
B0
K0
P1
W
Pin1
Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant
(mm) W1 (mm)
SN74HC595DBR
SN74HC595DR
SN74HC595DR
SN74HC595DWR
SN74HC595NSR
SN74HC595PWR
SSOP
SOIC
SOIC
SOIC
SO
DB
D
16
16
16
16
16
16
2000
2500
2500
2000
2000
2000
330.0
330.0
330.0
330.0
330.0
330.0
16.4
16.4
16.4
16.4
16.4
12.4
8.2
6.5
6.5
6.6
2.5
2.1
2.1
2.7
2.5
1.6
12.0
8.0
16.0
16.0
16.0
16.0
16.0
12.0
Q1
Q1
Q1
Q1
Q1
Q1
10.3
10.3
D
8.0
DW
NS
PW
10.75 10.7
12.0
12.0
8.0
8.2
7.0
10.5
5.6
TSSOP
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
13-Oct-2009
*All dimensions are nominal
Device
Package Type Package Drawing Pins
SPQ
Length (mm) Width (mm) Height (mm)
SN74HC595DBR
SN74HC595DR
SN74HC595DR
SN74HC595DWR
SN74HC595NSR
SN74HC595PWR
SSOP
SOIC
SOIC
SOIC
SO
DB
D
16
16
16
16
16
16
2000
2500
2500
2000
2000
2000
346.0
333.2
346.0
346.0
346.0
346.0
346.0
345.9
346.0
346.0
346.0
346.0
33.0
28.6
33.0
33.0
33.0
29.0
D
DW
NS
PW
TSSOP
Pack Materials-Page 2
MECHANICAL DATA
MLCC006B – OCTOBER 1996
FK (S-CQCC-N**)
LEADLESS CERAMIC CHIP CARRIER
28 TERMINAL SHOWN
A
B
NO. OF
TERMINALS
**
18 17 16 15 14 13 12
MIN
MAX
MIN
MAX
0.342
(8,69)
0.358
(9,09)
0.307
(7,80)
0.358
(9,09)
19
20
11
10
9
20
28
44
52
68
84
0.442
(11,23)
0.458
(11,63)
0.406
(10,31)
0.458
(11,63)
21
B SQ
22
0.640
(16,26)
0.660
(16,76)
0.495
(12,58)
0.560
(14,22)
8
A SQ
23
0.739
(18,78)
0.761
(19,32)
0.495
(12,58)
0.560
(14,22)
7
24
25
6
0.938
(23,83)
0.962
(24,43)
0.850
(21,6)
0.858
(21,8)
5
1.141
(28,99)
1.165
(29,59)
1.047
(26,6)
1.063
(27,0)
26 27 28
1
2
3
4
0.080 (2,03)
0.064 (1,63)
0.020 (0,51)
0.010 (0,25)
0.020 (0,51)
0.010 (0,25)
0.055 (1,40)
0.045 (1,14)
0.045 (1,14)
0.035 (0,89)
0.045 (1,14)
0.035 (0,89)
0.028 (0,71)
0.022 (0,54)
0.050 (1,27)
4040140/D 10/96
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. This package can be hermetically sealed with a metal lid.
D. The terminals are gold plated.
E. Falls within JEDEC MS-004
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MECHANICAL DATA
MSSO002E – JANUARY 1995 – REVISED DECEMBER 2001
DB (R-PDSO-G**)
PLASTIC SMALL-OUTLINE
28 PINS SHOWN
0,38
0,22
0,65
28
M
0,15
15
0,25
0,09
5,60
5,00
8,20
7,40
Gage Plane
1
14
0,25
A
0°–ā8°
0,95
0,55
Seating Plane
0,10
2,00 MAX
0,05 MIN
PINS **
14
16
20
24
28
30
38
DIM
6,50
5,90
6,50
5,90
7,50
8,50
7,90
10,50
9,90
10,50 12,90
A MAX
A MIN
6,90
9,90
12,30
4040065 /E 12/01
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion not to exceed 0,15.
D. Falls within JEDEC MO-150
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MECHANICAL DATA
MTSS001C – JANUARY 1995 – REVISED FEBRUARY 1999
PW (R-PDSO-G**)
PLASTIC SMALL-OUTLINE PACKAGE
14 PINS SHOWN
0,30
0,19
M
0,10
0,65
14
8
0,15 NOM
4,50
4,30
6,60
6,20
Gage Plane
0,25
1
7
0°–8°
A
0,75
0,50
Seating Plane
0,10
0,15
0,05
1,20 MAX
PINS **
8
14
16
20
24
28
DIM
3,10
2,90
5,10
4,90
5,10
4,90
6,60
6,40
7,90
9,80
9,60
A MAX
A MIN
7,70
4040064/F 01/97
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion not to exceed 0,15.
D. Falls within JEDEC MO-153
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Applications
Audio
Amplifiers
amplifier.ti.com
dataconverter.ti.com
www.dlp.com
www.ti.com/audio
Data Converters
DLP® Products
Automotive
www.ti.com/automotive
www.ti.com/communications
Communications and
Telecom
DSP
dsp.ti.com
Computers and
Peripherals
www.ti.com/computers
Clocks and Timers
Interface
www.ti.com/clocks
interface.ti.com
logic.ti.com
Consumer Electronics
Energy
www.ti.com/consumer-apps
www.ti.com/energy
Logic
Industrial
www.ti.com/industrial
Power Mgmt
Microcontrollers
RFID
power.ti.com
Medical
www.ti.com/medical
microcontroller.ti.com
www.ti-rfid.com
Security
www.ti.com/security
Space, Avionics &
Defense
www.ti.com/space-avionics-defense
RF/IF and ZigBee® Solutions www.ti.com/lprf
Video and Imaging
Wireless
www.ti.com/video
www.ti.com/wireless-apps
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2010, Texas Instruments Incorporated
相关型号：
©2020 ICPDF网 联系我们和版权申明