SN74AHC574DWG4 [TI]
OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH 3-STATE OUTPUTS; 八路边沿触发D型触发器具有三态输出
| 型号： | SN74AHC574DWG4 |
| 厂家： | 
TEXAS INSTRUMENTS |
| 描述： | OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH 3-STATE OUTPUTS |
| 文件： | 总21页 (文件大小：627K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SN54AHC574, SN74AHC574
OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS
WITH 3-STATE OUTPUTS
SCLS244I – OCTOBER 1995 – REVISED JULY 2003
Operating Range 2-V to 5.5-V V
ESD Protection Exceeds JESD 22
– 2000-V Human-Body Model (A114-A)
– 200-V Machine Model (A115-A)
CC
3-State Outputs Drive Bus Lines Directly
Latch-Up Performance Exceeds 250 mA Per
JESD 17
– 1000-V Charged-Device Model (C101)
SN54AHC574 . . . J OR W PACKAGE
SN74AHC574 . . . DB, DGV, DW, N, NS, OR PW PACKAGE
(TOP VIEW)
SN54AHC574 . . . FK PACKAGE
(TOP VIEW)
OE
1D
2D
3D
4D
5D
6D
7D
8D
V
CC
1
2
3
4
5
6
7
8
9
20
19
18
17
16
15
14
13
12
1Q
2Q
3Q
4Q
5Q
6Q
7Q
8Q
3
2
1
20 19
18
2Q
3Q
4Q
5Q
6Q
3D
4D
5D
6D
7D
4
5
6
7
8
17
16
15
14
9 10 11 12 13
GND 10
11 CLK
description/ordering information
The ’AHC574 devices are octal edge-triggered D-type flip-flops that feature 3-state outputs designed
specifically for driving highly capacitive or relatively low-impedance loads. These devices are particularly
suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers.
On the positive transition of the clock (CLK) input, the Q outputs are set to the logic levels of the data (D) inputs.
A buffered output-enable (OE) input places the eight outputs in either a normal logic state (high or low) or the
high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly.
The high-impedance state and the increased drive provide the capability to drive bus lines without interface or
pullup components.
ORDERING INFORMATION
ORDERABLE
PART NUMBER
TOP-SIDE
MARKING
†
PACKAGE
T
A
PDIP – N
Tube
SN74AHC574N
SN74AHC574N
Tube
SN74AHC574DW
SN74AHC574DWR
SN74AHC574NSR
SN74AHC574DBR
SN74AHC574PW
SN74AHC574PWR
SN74AHC574DGVR
SNJ54AHC574J
SOIC – DW
AHC574
Tape and reel
Tape and reel
Tape and reel
Tube
SOP – NS
AHC574
HA574
–40°C to 85°C
SSOP – DB
TSSOP – PW
HA574
Tape and reel
Tape and reel
Tube
TVSOP – DGV
CDIP – J
HA574
SNJ54AHC574J
SNJ54AHC574W
SNJ54AHC574FK
–55°C to 125°C
CFP – W
Tube
SNJ54AHC574W
SNJ54AHC574FK
LCCC – FK
Tube
†
Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines
are available at www.ti.com/sc/package.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright 2003, Texas Instruments Incorporated
On products compliant to MIL-PRF-38535, all parameters are tested
unless otherwise noted. On all other products, production
processing does not necessarily include testing of all parameters.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN54AHC574, SN74AHC574
OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS
WITH 3-STATE OUTPUTS
SCLS244I – OCTOBER 1995 – REVISED JULY 2003
description/ordering information (continued)
OE does not affect internal operations of the flip-flop. Old data can be retained or new data can be entered while
the outputs are in the high-impedance state.
To ensure the high-impedance state during power up or power down, OE should be tied to V through a pullup
CC
resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
FUNCTION TABLE
(each flip-flop)
INPUTS
OUTPUT
Q
OE
L
CLK
D
H
L
↑
↑
H
L
L
L
H or L
X
X
X
Q
0
H
Z
logic diagram (positive logic)
1
OE
11
CLK
C1
19
1Q
2
1D
1D
To Seven Other Channels
†
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage range, V
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to 7 V
CC
Input voltage range, V (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to 7 V
I
Output voltage range, V (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to V
+ 0.5 V
O
CC
Input clamp current, I (V < 0) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –20 mA
IK
I
Output clamp current, I
(V < 0 or V > V ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 mA
OK
O O CC
Continuous output current, I (V = 0 to V ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±25 mA
Continuous current through V
Package thermal impedance, θ (see Note 2): DB package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70°C/W
O
O
CC
CC
or GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±75 mA
JA
DGV package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92°C/W
DW package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58°C/W
N package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69°C/W
NS package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60°C/W
PW package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83°C/W
Storage temperature range, T
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to 150°C
stg
†
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
2. The package thermal impedance is calculated in accordance with JESD 51-7.
2
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN54AHC574, SN74AHC574
OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS
WITH 3-STATE OUTPUTS
SCLS244I – OCTOBER 1995 – REVISED JULY 2003
recommended operating conditions (see Note 3)
SN54AHC574 SN74AHC574
UNIT
MIN
MAX
MIN
MAX
V
V
Supply voltage
2
5.5
2
5.5
V
V
CC
V
CC
V
CC
V
CC
V
CC
V
CC
V
CC
= 2 V
1.5
2.1
3.85
1.5
2.1
3.85
High-level input voltage
= 3 V
IH
= 5.5 V
= 2 V
0.5
0.9
0.5
0.9
V
IL
Low-level input voltage
= 3 V
V
= 5.5 V
1.65
5.5
1.65
5.5
V
V
Input voltage
0
0
0
0
V
V
I
Output voltage
V
V
CC
O
CC
V
CC
V
CC
V
CC
V
CC
V
CC
V
CC
V
CC
V
CC
= 2 V
–50
–4
–8
50
4
–50
–4
–8
50
4
A
I
High-level output current
Low-level output current
= 3.3 V ± 0.3 V
= 5 V ± 0.5 V
= 2 V
OH
OL
mA
A
I
= 3.3 V ± 0.3 V
= 5 V ± 0.5 V
= 3.3 V ± 0.3 V
= 5 V ± 0.5 V
mA
8
8
100
20
125
100
20
85
∆t/∆v
Input transition rise or fall rate
Operating free-air temperature
ns/V
T
–55
–40
°C
A
NOTE 3: All unused inputs of the device must be held at V
or GND to ensure proper device operation. Refer to the TI application report,
CC
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
electrical characteristics over recommended operating free-air temperature range (unless
otherwise noted)
T
A
= 25°C
TYP
2
SN54AHC574 SN74AHC574
PARAMETER
TEST CONDITIONS
V
UNIT
CC
MIN
1.9
MAX
MIN
1.9
MAX
MIN
1.9
MAX
2 V
3 V
I
= –50
A
2.9
3
2.9
2.9
OH
4.5 V
3 V
4.4
4.5
4.4
4.4
V
V
OH
OL
2.58
3.94
2.48
3.8
2.48
3.8
I
I
= –4 mA
OH
4.5 V
2 V
= –8 mA
OH
0.1
0.1
0.1
0.1
0.1
0.5
0.5
±1*
±2.5
40
0.1
0.1
I
= 50
A
3 V
OL
4.5 V
3 V
0.1
0.1
V
V
0.36
0.36
±0.1
±0.25
4
0.44
0.44
±1
I
I
= 4 mA
= 8 mA
OL
4.5 V
0 V to 5.5 V
5.5 V
5.5 V
5 V
OL
I
I
I
V = 5.5 V or GND
A
A
I
I
V
= V or GND
CC
±2.5
40
OZ
CC
O
V = V
or GND,
or GND
I = 0
O
A
I
CC
CC
C
C
V = V
3
3
10
10
pF
pF
i
I
V
= V or GND
CC
5 V
o
O
* On products compliant to MIL-PRF-38535, this parameter is not production tested at V
CC
= 0 V.
3
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN54AHC574, SN74AHC574
OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS
WITH 3-STATE OUTPUTS
SCLS244I – OCTOBER 1995 – REVISED JULY 2003
timing requirements over recommended operating free-air temperature range,
V
= 3.3 V ± 0.3 V (unless otherwise noted) (see Figure 1)
CC
T
= 25°C
SN54AHC574 SN74AHC574
A
UNIT
MIN
5
MAX
MIN
5
MAX
MIN
5
MAX
t
w
t
su
t
h
Pulse duration, CLK high or low
Setup time, data before CLK↑
Hold time, data after CLK↑
ns
ns
ns
3.5
1.5
3.5
1.5
3.5
1.5
timing requirements over recommended operating free-air temperature range,
V
= 5 V ± 0.5 V (unless otherwise noted) (see Figure 1)
CC
T
= 25°C
SN54AHC574 SN74AHC574
A
UNIT
MIN
5
MAX
MIN
5
MAX
MIN
5
MAX
t
w
t
su
t
h
Pulse duration, CLK high or low
Setup time, data before CLK↑
Hold time, data after CLK↑
ns
ns
ns
3
3
3
1.5
1.5
1.5
switching characteristics over recommended operating free-air temperature range,
V
= 3.3 V ± 0.3 V (unless otherwise noted) (see Figure 1)
CC
T
A
= 25°C
TYP
125*
75
SN54AHC574 SN74AHC574
FROM
(INPUT)
TO
(OUTPUT)
LOAD
CAPACITANCE
PARAMETER
UNIT
MHz
ns
MIN
80*
50
MAX
MIN
65*
45
MAX
MIN
65
45
1
MAX
C
C
= 15 pF
= 50 pF
L
L
f
max
t
t
t
t
t
t
t
t
t
t
t
t
t
8.5* 13.2*
8.5* 13.2*
8.2* 12.8*
8.2* 12.8*
1* 15.5*
1* 15.5*
15.5
15.5
15
PLH
PHL
PZH
PZL
PHZ
PLZ
PLH
PHL
PZH
PZL
PHZ
PLZ
sk(o)
CLK
Q
Q
Q
Q
Q
Q
C
C
C
C
C
= 15 pF
= 15 pF
= 15 pF
= 50 pF
= 50 pF
L
L
L
L
L
1
1*
1*
1*
1*
1
15*
15*
15*
15*
19
1
ns
OE
OE
1
15
8.5*
8.5*
11
13*
13*
1
15
ns
1
15
16.7
16.7
16.3
16.3
15
1
19
CLK
ns
11
1
19
1
19
10.7
10.7
11
1
18.5
18.5
17
1
18.5
18.5
17
ns
OE
OE
1
1
1
1
C
C
= 50 pF
= 50 pF
ns
ns
L
L
11
15
1
17
1
17
1.5**
1.5
On products compliant to MIL-PRF-38535, this parameter is not production tested.
On products compliant to MIL-PRF-38535, this parameter does not apply.
4
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN54AHC574, SN74AHC574
OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS
WITH 3-STATE OUTPUTS
SCLS244I – OCTOBER 1995 – REVISED JULY 2003
switching characteristics over recommended operating free-air temperature range,
V
= 5 V ± 0.5 V (unless otherwise noted) (see Figure 1)
CC
T
A
= 25°C
TYP
180*
115
5.6*
5.6*
5.9*
5.9*
5.5*
5.5*
7.1
SN54AHC574 SN74AHC574
FROM
(INPUT)
TO
(OUTPUT)
LOAD
CAPACITANCE
PARAMETER
UNIT
MHz
ns
MIN
130*
85
MAX
MIN
110*
75
MAX
MIN
110
75
1
MAX
C
C
= 15 pF
= 50 pF
L
L
f
max
t
t
t
t
t
t
t
t
t
t
t
t
t
8.6*
8.6*
9*
1*
10*
10*
10
10
PLH
PHL
PZH
PZL
PHZ
PLZ
PLH
PHL
PZH
PZL
PHZ
PLZ
sk(o)
CLK
Q
Q
Q
Q
Q
Q
C
C
C
C
C
= 15 pF
= 15 pF
= 15 pF
= 50 pF
= 50 pF
L
L
L
L
L
1*
1
1* 10.5*
1* 10.5*
1* 10.5*
1* 10.5*
1
10.5
10.5
10.5
10.5
12
ns
OE
OE
9*
1
9*
1
ns
9*
1
10.6
10.6
11
1
1
1
1
1
1
12
12
1
CLK
ns
7.1
1
12
7.4
12.5
12.5
11.5
11.5
1
12.5
12.5
11.5
11.5
1
ns
OE
OE
7.4
11
1
7.1
10.1
10.1
1**
1
C
C
= 50 pF
= 50 pF
ns
ns
L
L
7.1
1
On products compliant to MIL-PRF-38535, this parameter is not production tested.
On products compliant to MIL-PRF-38535, this parameter does not apply.
noise characteristics, V
= 5 V, C = 50 pF, T = 25°C (see Note 4)
CC
L
A
SN74AHC574
PARAMETER
UNIT
MIN
MAX
0.8
V
V
V
V
V
Quiet output, maximum dynamic V
Quiet output, minimum dynamic V
V
V
V
V
V
OL(P)
OL(V)
OH(V)
IH(D)
IL(D)
OL
–0.8
OL
Quiet output, minimum dynamic V
High-level dynamic input voltage
Low-level dynamic input voltage
4.2
3.5
OH
1.5
NOTE 4: Characteristics are for surface-mount packages only.
operating characteristics, V
= 5 V, T = 25°C
A
CC
PARAMETER
TEST CONDITIONS
No load, f = 1 MHz
TYP
UNIT
C
Power dissipation capacitance
28
pF
pd
5
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN54AHC574, SN74AHC574
OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS
WITH 3-STATE OUTPUTS
SCLS244I – OCTOBER 1995 – REVISED JULY 2003
PARAMETER MEASUREMENT INFORMATION
V
CC
Open
GND
S1
R
= 1 kΩ
L
TEST
S1
From Output
Under Test
Test
Point
From Output
Under Test
t
t
/t
Open
PLH PHL
/t
C
C
L
t
V
CC
L
PLZ PZL
/t
(see Note A)
(see Note A)
GND
PHZ PZH
Open Drain
V
CC
LOAD CIRCUIT FOR
LOAD CIRCUIT FOR
TOTEM-POLE OUTPUTS
3-STATE AND OPEN-DRAIN OUTPUTS
V
CC
50% V
CC
Timing Input
0 V
t
w
t
h
t
su
V
CC
V
CC
50% V
50% V
CC
Input
CC
50% V
50% V
CC
Data Input
CC
0 V
0 V
VOLTAGE WAVEFORMS
PULSE DURATION
VOLTAGE WAVEFORMS
SETUP AND HOLD TIMES
V
V
CC
CC
Output
Control
50% V
50% V
50% V
50% V
t
Input
CC
CC
CC
CC
0 V
0 V
t
PZL
t
t
t
PLZ
PLH
PHL
Output
Waveform 1
V
OH
≈V
CC
In-Phase
Output
50% V
50% V
CC
50% V
CC
CC
V
S1 at V
(see Note B)
V
OL
+ 0.3 V
CC
V
OL
OL
t
t
t
PHL
PLH
PZH
PHZ
Output
Waveform 2
S1 at GND
V
V
OH
OH
Out-of-Phase
Output
V
OH
– 0.3 V
50% V
50% V
50% V
CC
CC
CC
V
≈0 V
(see Note B)
OL
VOLTAGE WAVEFORMS
PROPAGATION DELAY TIMES
INVERTING AND NONINVERTING OUTPUTS
VOLTAGE WAVEFORMS
ENABLE AND DISABLE TIMES
LOW- AND HIGH-LEVEL ENABLING
NOTES: A. includes probe and jig capacitance.
C
L
B. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control.
C. All input pulses are supplied by generators having the following characteristics: PRR ≤ 1 MHz, Z = 50 Ω, t ≤ 3 ns, t ≤ 3 ns.
O
r
f
D. The outputs are measured one at a time with one input transition per measurement.
E. All parameters and waveforms are not applicable to all devices.
Figure 1. Load Circuit and Voltage Waveforms
6
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
PACKAGE OPTION ADDENDUM
www.ti.com
17-Aug-2007
PACKAGING INFORMATION
Orderable Device
Status (1)
Package Package
Pins Package Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
Qty
Type
LCCC
CDIP
CFP
Drawing
5962-9685401Q2A
5962-9685401QRA
5962-9685401QSA
SN74AHC574DBLE
SN74AHC574DBR
ACTIVE
ACTIVE
FK
J
20
20
20
20
20
1
1
1
TBD
TBD
TBD
TBD
POST-PLATE N / A for Pkg Type
Call TI
A42
N / A for Pkg Type
N / A for Pkg Type
Call TI
ACTIVE
W
OBSOLETE
ACTIVE
SSOP
SSOP
DB
DB
Call TI
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SN74AHC574DBRE4
SN74AHC574DBRG4
SN74AHC574DGVR
SN74AHC574DGVRE4
SN74AHC574DGVRG4
SN74AHC574DW
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
SSOP
SSOP
TVSOP
TVSOP
TVSOP
SOIC
SOIC
SOIC
SOIC
SOIC
SOIC
PDIP
DB
DB
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
DGV
DGV
DGV
DW
DW
DW
DW
DW
DW
N
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
25 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SN74AHC574DWE4
SN74AHC574DWG4
SN74AHC574DWR
SN74AHC574DWRE4
SN74AHC574DWRG4
SN74AHC574N
25 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
25 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
20
Pb-Free
(RoHS)
CU NIPDAU N / A for Pkg Type
SN74AHC574NE4
PDIP
N
20
Pb-Free
(RoHS)
CU NIPDAU N / A for Pkg Type
SN74AHC574NSR
SN74AHC574NSRE4
SN74AHC574NSRG4
SN74AHC574PW
SO
NS
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SO
NS
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SO
NS
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
TSSOP
TSSOP
TSSOP
PW
PW
PW
70 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SN74AHC574PWE4
SN74AHC574PWG4
70 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
70 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SN74AHC574PWLE
SN74AHC574PWR
OBSOLETE TSSOP
PW
PW
20
20
TBD
Call TI
Call TI
ACTIVE
TSSOP
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SN74AHC574PWRE4
ACTIVE
TSSOP
PW
20
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
17-Aug-2007
Orderable Device
Status (1)
Package Package
Pins Package Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
Qty
Type
Drawing
SN74AHC574PWRG4
ACTIVE
TSSOP
PW
20
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SNJ54AHC574FK
SNJ54AHC574J
SNJ54AHC574W
ACTIVE
ACTIVE
ACTIVE
LCCC
CDIP
CFP
FK
J
20
20
20
1
1
1
TBD
TBD
TBD
POST-PLATE N / A for Pkg Type
Call TI
A42
N / A for Pkg Type
N / A for Pkg Type
W
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com
16-Jul-2007
TAPE AND REEL INFORMATION
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
16-Jul-2007
Device
Package Pins
Site
Reel
Reel
A0 (mm)
B0 (mm)
K0 (mm)
P1
W
Pin1
Diameter Width
(mm) (mm) Quadrant
(mm)
330
330
330
330
330
(mm)
16
SN74AHC574DBR
SN74AHC574DGVR
SN74AHC574DWR
SN74AHC574NSR
SN74AHC574PWR
DB
DGV
DW
NS
20
20
20
20
20
MLA
MLA
MLA
MLA
MLA
8.2
7.0
7.5
5.6
2.5
1.6
2.7
2.5
1.6
12
8
16
12
24
24
16
Q1
Q1
Q1
Q1
Q1
12
24
10.8
8.2
13.0
13.0
7.1
12
12
8
24
PW
16
6.95
TAPE AND REEL BOX INFORMATION
Device
Package
Pins
Site
Length (mm) Width (mm) Height (mm)
SN74AHC574DBR
SN74AHC574DGVR
SN74AHC574DWR
SN74AHC574NSR
SN74AHC574PWR
DB
DGV
DW
NS
20
20
20
20
20
MLA
MLA
MLA
MLA
MLA
346.0
346.0
333.2
333.2
346.0
346.0
346.0
333.2
333.2
346.0
33.0
29.0
31.75
31.75
33.0
PW
Pack Materials-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com
16-Jul-2007
Pack Materials-Page 3
MECHANICAL DATA
MLCC006B – OCTOBER 1996
FK (S-CQCC-N**)
LEADLESS CERAMIC CHIP CARRIER
28 TERMINAL SHOWN
A
B
NO. OF
TERMINALS
**
18 17 16 15 14 13 12
MIN
MAX
MIN
MAX
0.342
(8,69)
0.358
(9,09)
0.307
(7,80)
0.358
(9,09)
19
20
11
10
9
20
28
44
52
68
84
0.442
(11,23)
0.458
(11,63)
0.406
(10,31)
0.458
(11,63)
21
B SQ
22
0.640
(16,26)
0.660
(16,76)
0.495
(12,58)
0.560
(14,22)
8
A SQ
23
0.739
(18,78)
0.761
(19,32)
0.495
(12,58)
0.560
(14,22)
7
24
25
6
0.938
(23,83)
0.962
(24,43)
0.850
(21,6)
0.858
(21,8)
5
1.141
(28,99)
1.165
(29,59)
1.047
(26,6)
1.063
(27,0)
26 27 28
1
2
3
4
0.080 (2,03)
0.064 (1,63)
0.020 (0,51)
0.010 (0,25)
0.020 (0,51)
0.010 (0,25)
0.055 (1,40)
0.045 (1,14)
0.045 (1,14)
0.035 (0,89)
0.045 (1,14)
0.035 (0,89)
0.028 (0,71)
0.022 (0,54)
0.050 (1,27)
4040140/D 10/96
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. This package can be hermetically sealed with a metal lid.
D. The terminals are gold plated.
E. Falls within JEDEC MS-004
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MECHANICAL DATA
MPDS006C – FEBRUARY 1996 – REVISED AUGUST 2000
DGV (R-PDSO-G**)
PLASTIC SMALL-OUTLINE
24 PINS SHOWN
0,23
0,13
M
0,07
0,40
24
13
0,16 NOM
4,50
4,30
6,60
6,20
Gage Plane
0,25
0°–ā8°
0,75
1
12
0,50
A
Seating Plane
0,08
0,15
0,05
1,20 MAX
PINS **
14
16
20
24
38
48
56
DIM
A MAX
A MIN
3,70
3,50
3,70
3,50
5,10
4,90
5,10
4,90
7,90
7,70
9,80
9,60
11,40
11,20
4073251/E 08/00
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion, not to exceed 0,15 per side.
D. Falls within JEDEC: 24/48 Pins – MO-153
14/16/20/56 Pins – MO-194
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MECHANICAL DATA
MSSO002E – JANUARY 1995 – REVISED DECEMBER 2001
DB (R-PDSO-G**)
PLASTIC SMALL-OUTLINE
28 PINS SHOWN
0,38
0,22
0,65
28
M
0,15
15
0,25
0,09
5,60
5,00
8,20
7,40
Gage Plane
1
14
0,25
A
0°–ā8°
0,95
0,55
Seating Plane
0,10
2,00 MAX
0,05 MIN
PINS **
14
16
20
24
28
30
38
DIM
6,50
5,90
6,50
5,90
7,50
8,50
7,90
10,50
9,90
10,50 12,90
A MAX
A MIN
6,90
9,90
12,30
4040065 /E 12/01
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion not to exceed 0,15.
D. Falls within JEDEC MO-150
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MECHANICAL DATA
MTSS001C – JANUARY 1995 – REVISED FEBRUARY 1999
PW (R-PDSO-G**)
PLASTIC SMALL-OUTLINE PACKAGE
14 PINS SHOWN
0,30
0,19
M
0,10
0,65
14
8
0,15 NOM
4,50
4,30
6,60
6,20
Gage Plane
0,25
1
7
0°–8°
A
0,75
0,50
Seating Plane
0,10
0,15
0,05
1,20 MAX
PINS **
8
14
16
20
24
28
DIM
3,10
2,90
5,10
4,90
5,10
4,90
6,60
6,40
7,90
9,80
9,60
A MAX
A MIN
7,70
4040064/F 01/97
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion not to exceed 0,15.
D. Falls within JEDEC MO-153
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements,
improvements, and other changes to its products and services at any time and to discontinue any product or service without notice.
Customers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s
standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this
warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily
performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should
provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask
work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services
are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such
products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under
the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is
accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an
unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties
may be subject to additional restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service
voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business
practice. TI is not responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would
reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement
specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications
of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related
requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any
applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its
representatives against any damages arising out of the use of TI products in such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is
solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in
connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products
are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any
non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Amplifiers
Data Converters
DSP
Applications
Audio
amplifier.ti.com
dataconverter.ti.com
dsp.ti.com
www.ti.com/audio
Automotive
Broadband
Digital Control
Military
www.ti.com/automotive
www.ti.com/broadband
www.ti.com/digitalcontrol
www.ti.com/military
Interface
interface.ti.com
logic.ti.com
Logic
Power Mgmt
Microcontrollers
RFID
power.ti.com
Optical Networking
Security
www.ti.com/opticalnetwork
www.ti.com/security
www.ti.com/telephony
www.ti.com/video
microcontroller.ti.com
www.ti-rfid.com
www.ti.com/lpw
Telephony
Low Power
Wireless
Video & Imaging
Wireless
www.ti.com/wireless
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2007, Texas Instruments Incorporated
相关型号：
©2020 ICPDF网 联系我们和版权申明