SN74ALS1002AJ [TI]
IC IC,LOGIC GATE,QUAD 2-INPUT NOR,ALS-TTL,DIP,14PIN,CERAMIC, Gate;
| 型号： | SN74ALS1002AJ |
| 厂家： | 
TEXAS INSTRUMENTS |
| 描述： | IC IC,LOGIC GATE,QUAD 2-INPUT NOR,ALS-TTL,DIP,14PIN,CERAMIC, Gate 栅极 触发器 逻辑集成电路 光电二极管 输入元件 |
| 文件： | 总7页 (文件大小：251K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
ꢀꢁ ꢂꢃ ꢄꢅ ꢀ ꢆꢇ ꢇ ꢈ ꢄꢉ ꢊꢀ ꢁꢋ ꢃ ꢄꢅ ꢀꢆ ꢇꢇ ꢈꢄ
ꢌ ꢍꢄꢎꢏ ꢍꢐꢅ ꢑꢊ ꢈꢒꢓ ꢁꢐꢍ ꢔ ꢊꢐꢕ ꢀ ꢓꢔ ꢓꢖꢑ ꢒꢁꢕ ꢏꢊ ꢗꢍ ꢘꢘꢑ ꢏ ꢀ
ꢙ
ꢙ
SDAS238 − D2661, DECEMBER 1983 − REVISED MAY 1986
• Quad Versions of ’ALS805A
• Buffer Version of ’ALS02
SN54ALS1002A . . . J PACKAGE
SN74ALS1002A . . . D OR N PACKAGE
(TOP VIEW)
• Package Options Include Plastic Small
Outline Packages, Ceramic Chip Carriers,
and Standard Plastic and Ceramic 300-mil
DIPs
1Y
1A
1B
2Y
2A
V
1
2
3
4
5
6
7
14
13
12
11
10
9
CC
4Y
4B
4A
3Y
3B
3A
• Dependable Texas Instruments Quality and
Reliability
2B
GND
description
8
These devices contain four independent 2-input
NOR buffers. They perform the Boolean functions
Y = A + B or Y = A•B in positive logic.
SN54ALS1002A . . . FK PACKAGE
(TOP VIEW)
The SN54ALS1002A is characterized for opera-
tion over the full military temperature range of
−55°C to 125°C. The SN74ALS1002A is
characterized for operation from 0°C to 70°C.
3
2
1
20 19
18
4B
NC
4A
NC
3Y
1B
NC
2Y
4
5
6
7
8
17
16
15
14
FUNCTION TABLE
(each gate)
NC
2A
INPUTS
OUTPUT
9 10 11 12 13
A
H
X
L
B
X
H
L
Y
L
L
NC − No internal connection
H
logic symbol†
logic diagram (positive logic)
2
≥1
1A
1B
1A
1
1Y
2Y
3Y
4Y
1Y
3
1B
5
2A
2B
4
10
13
2A
2Y
3Y
4Y
6
2B
8
3A
3A
3B
9
3B
11
4A
4A
4B
12
4B
†
This symbol is in accordance with ANSI/IEEE Std 91-1984 and
IEC Publication 617-12.
Pin numbers shown are for D, J, and N packages.
ꢐꢏ ꢕ ꢎꢍ ꢚ ꢔꢓ ꢕꢁ ꢎ ꢄꢔꢄ ꢛꢜ ꢝ ꢞꢟ ꢠꢡ ꢢꢛꢞ ꢜ ꢛꢣ ꢤꢥ ꢟ ꢟ ꢦꢜꢢ ꢡꢣ ꢞꢝ ꢧꢥꢨ ꢩꢛꢤ ꢡꢢ ꢛꢞꢜ ꢪꢡ ꢢꢦ ꢫ
ꢐꢟ ꢞ ꢪꢥꢤ ꢢ ꢣ ꢤ ꢞꢜ ꢝꢞ ꢟ ꢠ ꢢ ꢞ ꢣ ꢧꢦ ꢤ ꢛꢝ ꢛꢤꢡ ꢢꢛ ꢞꢜꢣ ꢧꢦ ꢟ ꢢꢬ ꢦ ꢢꢦ ꢟ ꢠꢣ ꢞꢝ ꢔꢦꢭ ꢡꢣ ꢓꢜꢣ ꢢꢟ ꢥꢠ ꢦꢜꢢ ꢣ
ꢣ ꢢ ꢡ ꢜꢪ ꢡ ꢟꢪ ꢮ ꢡ ꢟꢟ ꢡ ꢜ ꢢꢯꢫ ꢐꢟ ꢞ ꢪꢥꢤ ꢢꢛꢞꢜ ꢧꢟ ꢞꢤ ꢦꢣ ꢣꢛ ꢜꢰ ꢪꢞꢦ ꢣ ꢜꢞꢢ ꢜꢦ ꢤꢦ ꢣꢣ ꢡꢟ ꢛꢩ ꢯ ꢛꢜꢤ ꢩꢥꢪ ꢦ
ꢢ ꢦ ꢣ ꢢꢛ ꢜꢰ ꢞꢝ ꢡ ꢩꢩ ꢧꢡ ꢟ ꢡ ꢠ ꢦ ꢢ ꢦ ꢟ ꢣ ꢫ
Copyright 1986, Texas Instruments Incorporated
5BASIC
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
POST OFFICE BOX 1443 • HOUSTON, TEXAS 77001
ꢀꢁ ꢂ ꢃꢄ ꢅ ꢀꢆ ꢇ ꢇꢈ ꢄꢉ ꢊ ꢀꢁꢋ ꢃ ꢄꢅ ꢀ ꢆ ꢇ ꢇ ꢈ ꢄ
ꢌꢍ ꢄ ꢎꢏ ꢍ ꢐꢅꢑ ꢊ ꢈ ꢒꢓ ꢁꢐ ꢍꢔ ꢊ ꢐ ꢕ ꢀꢓ ꢔ ꢓꢖ ꢑꢒ ꢁꢕꢏꢊ ꢗꢍꢘ ꢘꢑ ꢏꢀ
ꢙ ꢙ
ꢙ
SDAS238 − D2661, DECEMBER 1983 − REVISED MAY 1986
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage, V
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V
CC
Input voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V
Operating free-air temperature range: SN54ALS1002A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −55°C to 125°C
SN74ALS1002A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C
Storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C
recommended operating conditions
SN54ALS1002A
MIN NOM MAX
SN74ALS1002A
MIN NOM MAX
UNIT
V
V
V
Supply voltage
4.5
2
5
5.5
4.5
2
5
5.5
V
V
CC
IH
High-level input voltage
Low-level input voltage
High-level output current
Low-level output current
Operating free-air temperature
0.7
−1
0.8
−2.6
24
V
IL
I
I
mA
mA
°C
OH
12
OL
T
A
−55
125
0
70
electrical characteristics over recommended operating-free-air temperature range (unless
otherwise noted)
SN54ALS1002A
SN74ALS1002A
PARAMETER
TEST CONDITIONS
UNIT
†
†
MIN TYP
MAX
MIN TYP
MAX
V
V
CC
V
CC
V
CC
V
CC
V
CC
V
CC
V
CC
V
CC
V
CC
V
CC
V
CC
V
CC
= 4.5 V,
= 4.5 V to 5.5 V,
= 4.5 V,
= 4.5 V,
= 4.5 V,
= 4.5 V,
= 5.5 V,
= 5.5 V,
= 5.5 V,
= 5.5 V,
= 5.5 V,
= 5.5 V,
I = −18 mA
−1.5
−1.5
V
IK
I
I
I
I
I
I
= −0.4 mA
= −1 mA
= −2.6 mA
= 12 mA
V
CC
−2
V
CC
−2
OH
OH
OH
OL
OL
V
OH
2.4
3.3
V
2.4
3.2
0.25
0.35
0.25
0.4
0.4
0.5
V
OL
V
= 24 mA
I
I
I
I
I
I
V = 7 V
I
V = 2.7 V
I
V = 0.4 V
I
0.1
20
0.1
mA
µA
I
20
IH
IL
−0.1
−112
2.8
−0.1
−112
2.8
mA
mA
mA
mA
†
V
O
= 2.25 V
−30
−30
O
V = 0 V
I
V = 4.5 V
I
1.7
5.6
1.7
5.6
CCH
CCL
9
9
†
‡
All typical values are at V
= 5 V, T = 25°C.
A
CC
The output conditions have been chosen to produce a current that closely approximates one half of the true short-circuit output current, I
.
OS
switching characteristics (see Note 1)
V
= 5 V,
= 50 pF,
= 500 Ω,
= 25°C
V
= 4.5 V to 5.5 V,
CC
CC
C
R
C
= 50 pF,
L
L
L
FROM
TO
R
= 500 Ω,
L
PARAMETER
UNIT
(INPUT)
(OUTPUT)
T
A
T
= MIN to MAX
A
’ALS1002A
SN54ALS1002A
SN74ALS1002A
TYP
4
MIN
MAX
10
MIN
2
MAX
t
t
A or B
A or B
Y
Y
2
2
8
7
ns
ns
PLH
4
10
2
PHL
NOTE 1: Load circuit and voltage waveforms are shown in Section 1.
2
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
POST OFFICE BOX 1443 • HOUSTON, TEXAS 77001
PACKAGE OPTION ADDENDUM
www.ti.com
9-Oct-2007
PACKAGING INFORMATION
Orderable Device
Status (1)
Package Package
Pins Package Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
Qty
Type
LCCC
CDIP
CDIP
PDIP
PDIP
Drawing
JM38510/38402B2A
JM38510/38402BCA
JM38510/38402BCA
SN74ALS1002AN
SN74ALS1002AN
ACTIVE
ACTIVE
FK
J
20
14
14
14
14
1
1
1
TBD
TBD
TBD
TBD
TBD
POST-PLATE N / A for Pkg Type
A42 SNPB
A42 SNPB
Call TI
N / A for Pkg Type
N / A for Pkg Type
Call TI
ACTIVE
J
OBSOLETE
OBSOLETE
N
N
Call TI
Call TI
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 1
MECHANICAL DATA
MLCC006B – OCTOBER 1996
FK (S-CQCC-N**)
LEADLESS CERAMIC CHIP CARRIER
28 TERMINAL SHOWN
A
B
NO. OF
TERMINALS
**
18 17 16 15 14 13 12
MIN
MAX
MIN
MAX
0.342
(8,69)
0.358
(9,09)
0.307
(7,80)
0.358
(9,09)
19
20
11
10
9
20
28
44
52
68
84
0.442
(11,23)
0.458
(11,63)
0.406
(10,31)
0.458
(11,63)
21
B SQ
22
0.640
(16,26)
0.660
(16,76)
0.495
(12,58)
0.560
(14,22)
8
A SQ
23
0.739
(18,78)
0.761
(19,32)
0.495
(12,58)
0.560
(14,22)
7
24
25
6
0.938
(23,83)
0.962
(24,43)
0.850
(21,6)
0.858
(21,8)
5
1.141
(28,99)
1.165
(29,59)
1.047
(26,6)
1.063
(27,0)
26 27 28
1
2
3
4
0.080 (2,03)
0.064 (1,63)
0.020 (0,51)
0.010 (0,25)
0.020 (0,51)
0.010 (0,25)
0.055 (1,40)
0.045 (1,14)
0.045 (1,14)
0.035 (0,89)
0.045 (1,14)
0.035 (0,89)
0.028 (0,71)
0.022 (0,54)
0.050 (1,27)
4040140/D 10/96
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. This package can be hermetically sealed with a metal lid.
D. The terminals are gold plated.
E. Falls within JEDEC MS-004
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Applications
Audio
Automotive
Broadband
Digital Control
Medical
Amplifiers
Data Converters
DSP
Clocks and Timers
Interface
amplifier.ti.com
dataconverter.ti.com
dsp.ti.com
www.ti.com/clocks
interface.ti.com
logic.ti.com
www.ti.com/audio
www.ti.com/automotive
www.ti.com/broadband
www.ti.com/digitalcontrol
www.ti.com/medical
www.ti.com/military
Logic
Military
Power Mgmt
Microcontrollers
RFID
power.ti.com
microcontroller.ti.com
www.ti-rfid.com
Optical Networking
Security
Telephony
Video & Imaging
Wireless
www.ti.com/opticalnetwork
www.ti.com/security
www.ti.com/telephony
www.ti.com/video
RF/IF and ZigBee® Solutions www.ti.com/lprf
www.ti.com/wireless
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright 2008, Texas Instruments Incorporated
相关型号：
©2020 ICPDF网 联系我们和版权申明