SN74ALVC126DGVRG4 [TI]
ALVC/VCX/A SERIES, QUAD 1-BIT DRIVER, TRUE OUTPUT, PDSO14, GREEN, PLASTIC, TVSOP-14;型号: | SN74ALVC126DGVRG4 |
厂家: | TEXAS INSTRUMENTS |
描述: | ALVC/VCX/A SERIES, QUAD 1-BIT DRIVER, TRUE OUTPUT, PDSO14, GREEN, PLASTIC, TVSOP-14 驱动 光电二极管 输出元件 逻辑集成电路 电视 |
文件: | 总15页 (文件大小:645K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SN74ALVC126
QUADRUPLE BUS BUFFER GATE
WITH 3-STATE OUTPUTS
www.ti.com
SCES111J–JULY 1997–REVISED OCTOBER 2004
FEATURES
D, DGV, NS, OR PW PACKAGE
(TOP VIEW)
•
•
•
•
Operates From 1.65 V to 3.6 V
Max tpd of 3.1 ns at 3.3 V
1OE
1A
V
CC
1
2
3
4
5
6
7
14
13
±24-mA Output Drive at 3.3 V
4OE
Latch-Up Performance Exceeds 250 mA Per
JESD 17
1Y
12 4A
11 4Y
2OE
2A
•
ESD Performance Tested Per JESD 22
– 2000-V Human-Body Model (A114-A)
– 200-V Machine Model (A115-A)
10
9
3OE
3A
2Y
8
GND
3Y
– 1000-V Charged-Device Model (C101)
DESCRIPTION/ORDERING INFORMATION
This quadruple bus buffer gate is designed for 1.65-V to 3.6-V VCC operation.
The SN74ALVC126 features independent line drivers with 3-state outputs. Each output is disabled when the
associated output-enable (OE) input is low.
To ensure the high-impedance state during power up or power down, OE should be tied to GND through a
pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.
ORDERING INFORMATION
TA
PACKAGE(1)
ORDERABLE PART NUMBER
SN74ALVC126D
TOP-SIDE MARKING
ALVC126
Tube
SOIC – D
Tape and reel
SN74ALVC126DR
-40°C to 85°C
SOP – NS
Tape and reel
Tape and reel
Tape and reel
SN74ALVC126NSR
SN74ALVC126PWR
SN74ALVC126DGVR
ALVC126
VA126
TSSOP – PW
TVSOP – DGV
VA126
(1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
FUNCTION TABLE
(each buffer)
INPUTS
OUTPUT
Y
OE
H
A
H
L
H
L
H
L
X
Z
LOGIC DIAGRAM (POSITIVE LOGIC)
1
2
10
1OE
1A
3OE
3
6
9
8
1Y
2Y
3A
3Y
4Y
4
5
13
12
2OE
2A
4OE
4A
11
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Copyright © 1997–2004, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
SN74ALVC126
QUADRUPLE BUS BUFFER GATE
WITH 3-STATE OUTPUTS
www.ti.com
SCES111J–JULY 1997–REVISED OCTOBER 2004
ABSOLUTE MAXIMUM RATINGS(1)
over operating free-air temperature range (unless otherwise noted)
MIN
-0.5
-0.5
-0.5
MAX
4.6
UNIT
VCC
VI
Supply voltage range
Input voltage range(2)
Output voltage range(2)(3)
V
4.6
VCC + 0.5
-50
V
VO
IIK
V
Input clamp current
VI < 0
mA
mA
mA
mA
IOK
IO
Output clamp current
VO < 0
-50
Continuous output current
Continuous current through VCC or GND
±50
±100
86
D package
DGV package
NS package
PW package
127
θJA
Package thermal impedance(4)
°C/W
°C
76
113
Tstg
Storage temperature range
-65
150
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) The input negative-voltage and output voltage ratings may be exceeded if the input and output current ratings are observed.
(3) This value is limited to 4.6 V maximum.
(4) The package thermal impedance is calculated in accordance with JESD 51-7.
RECOMMENDED OPERATING CONDITIONS(1)
MIN
MAX
UNIT
VCC
Supply voltage
1.65
3.6
V
VCC = 1.65 V to 1.95 V
VCC = 2.3 V to 2.7 V
VCC = 2.7 V to 3.6 V
VCC = 1.65 V to 1.95 V
VCC = 2.3 V to 2.7 V
VCC = 2.7 V to 3.6 V
0.65 × VCC
VIH
High-level input voltage
1.7
2
V
V
0.35 × VCC
VIL
Low-level input voltage
0.7
0.8
3.6
VCC
-4
VI
Input voltage
0
0
V
V
VO
Output voltage
VCC = 1.65 V
VCC = 2.3 V
VCC = 2.7 V
VCC = 3 V
-12
-12
-24
4
IOH
High-level output current
Low-level output current
mA
mA
VCC = 1.65 V
VCC = 2.3 V
VCC = 2.7 V
VCC = 3 V
12
12
24
5
IOL
∆t/∆v
Input transition rise or fall rate
Operating free-air temperature
ns/V
TA
-40
85
°C
(1) All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
2
SN74ALVC126
QUADRUPLE BUS BUFFER GATE
WITH 3-STATE OUTPUTS
www.ti.com
SCES111J–JULY 1997–REVISED OCTOBER 2004
ELECTRICAL CHARACTERISTICS
over recommended operating free-air temperature range (unless otherwise noted)
PARAMETER
TEST CONDITIONS
VCC
1.65 V to 3.6 V VCC - 0.2
MIN TYP(1)
MAX
UNIT
IOH = -100 µA
IOH = -4 mA
IOH = -6 mA
1.65 V
2.3 V
1.2
2
VOH
2.3 V
1.7
2.2
2.4
2
V
IOH = -12 mA
2.7 V
3 V
IOH = -24 mA
IOL = 100 µA
IOL = 4 mA
IOL = 6 mA
3 V
1.65 V to 3.6 V
1.65 V
2.3 V
0.2
0.45
0.4
VOL
V
2.3 V
0.7
IOL = 12 mA
2.7 V
0.4
IOL = 24 mA
3 V
0.55
±5
II
VI = VCC or GND
VO = VCC or GND
VI = VCC or GND,
3.6 V
µA
µA
µA
µA
IOZ
ICC
3.6 V
±10
10
IO = 0
3.6 V
∆ICC
One input at VCC - 0.6 V,
Other inputs at VCC or GND
3 V to 3.6 V
750
Control inputs
Data inputs
Outputs
3.5
3.5
5.5
Ci
VI = VCC or GND
3.3 V
3.3 V
pF
pF
Co
VO = VCC or GND
(1) All typical values are at VCC = 3.3 V, TA = 25°C.
SWITCHING CHARACTERISTICS
over recommended operating free-air temperature range (unless otherwise noted) (see Figure 1)
VCC = 1.8 V
± 0.15 V
VCC = 2.5 V
± 0.2 V
VCC = 3.3 V
± 0.3 V
VCC = 2.7 V
FROM
(INPUT)
TO
(OUTPUT)
PARAMETER
UNIT
MIN
1.3
1
MAX
MIN
1
MAX
MIN
MAX
MIN
1.1
1
MAX
tpd
ten
tdis
A
Y
Y
Y
5.6
5.9
5.6
3.4
3.8
3.3
3.4
3.8
4.4
3.1
3.3
3.7
ns
ns
ns
OE
OE
1
1.8
1
1
OPERATING CHARACTERISTICS
TA = 25°C
VCC = 1.8 V
VCC = 2.5 V
VCC = 3.3 V
TEST
CONDITIONS
PARAMETER
UNIT
TYP
15
2
TYP
17
2
TYP
19
3
Outputs enabled
Outputs disabled
Power dissipation
capacitance per gate
Cpd
CL = 0, f = 10 MHz
pF
3
SN74ALVC126
QUADRUPLE BUS BUFFER GATE
WITH 3-STATE OUTPUTS
www.ti.com
SCES111J–JULY 1997–REVISED OCTOBER 2004
PARAMETER MEASUREMENT INFORMATION
V
LOAD
S1
Open
R
L
From Output
Under Test
TEST
S1
GND
t
Open
V
LOAD
GND
pd
/t
/t
C
t
t
L
PLZ PZL
R
L
(see Note A)
PHZ PZH
LOAD CIRCUIT
INPUT
V
CC
V
M
V
LOAD
C
L
R
L
V
∆
V
I
t /t
r f
1.8 V ± 0.15 V
2.5 V ± 0.2 V
2.7 V
V
V
2.7 V
2.7 V
V
/2
/2
2 × V
2 × V
6 V
6 V
1 kΩ
500 Ω
500 Ω
500 Ω
0.15 V
0.15 V
0.3 V
≤2 ns
≤2 ns
≤2.5 ns
≤2.5 ns
30 pF
30 pF
50 pF
50 pF
CC
CC
CC
V
CC
CC
CC
1.5 V
1.5 V
3.3 V ± 0.3 V
0.3 V
t
w
V
I
V
I
V
M
V
M
Input
Timing
Input
V
M
0 V
0 V
VOLTAGE WAVEFORMS
PULSE DURATION
t
su
t
h
V
I
Output
Control
(low-level
enabling)
Data
Input
V
I
V
V
M
M
V
M
V
M
0 V
0 V
VOLTAGE WAVEFORMS
SETUP AND HOLD TIMES
t
t
PLZ
PZL
Output
Waveform 1
S1 at V
LOAD
(see Note B)
V
V
/2
LOAD
V
I
V
M
Input
V
M
V
M
V + V
∆
OL
0 V
OL
t
t
PZH
PHZ
t
t
PHL
PLH
Output
Waveform 2
S1 at GND
V
OH
V
V
OH
V
OH
− V
∆
V
M
Output
V
M
V
M
0 V
OL
(see Note B)
VOLTAGE WAVEFORMS
PROPAGATION DELAY TIMES
VOLTAGE WAVEFORMS
ENABLE AND DISABLE TIMES
NOTES: A. C includes probe and jig capacitance.
L
B. Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control.
C. All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, Z = 50 Ω.
O
D. The outputs are measured one at a time, with one transition per measurement.
E.
F.
G.
t
t
t
and t
and t
and t
are the same as t
.
dis
.
PLZ
PZL
PLH
PHZ
are the same as t
PZH
en
are the same as t .
PHL pd
H. All parameters and waveforms are not applicable to all devices.
Figure 1. Load Circuit and Voltage Waveforms
4
PACKAGE OPTION ADDENDUM
www.ti.com
4-Jun-2007
PACKAGING INFORMATION
Orderable Device
SN74ALVC126D
Status (1)
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
Package Package
Pins Package Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
Qty
Type
Drawing
SOIC
D
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
50 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SN74ALVC126DE4
SN74ALVC126DG4
SN74ALVC126DGVR
SN74ALVC126DGVRE4
SN74ALVC126DGVRG4
SN74ALVC126DR
SOIC
SOIC
TVSOP
TVSOP
TVSOP
SOIC
SOIC
SOIC
SO
D
D
50 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
50 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
DGV
DGV
DGV
D
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SN74ALVC126DRE4
SN74ALVC126DRG4
SN74ALVC126NSR
SN74ALVC126NSRE4
SN74ALVC126NSRG4
SN74ALVC126PWR
SN74ALVC126PWRE4
SN74ALVC126PWRG4
D
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
D
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
NS
NS
NS
PW
PW
PW
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SO
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SO
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
TSSOP
TSSOP
TSSOP
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
4-Jun-2007
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com
14-Jul-2012
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
B0
K0
P1
W
Pin1
Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant
(mm) W1 (mm)
SN74ALVC126DGVR
SN74ALVC126DR
SN74ALVC126NSR
SN74ALVC126PWR
TVSOP
SOIC
SO
DGV
D
14
14
14
14
2000
2500
2000
2000
330.0
330.0
330.0
330.0
12.4
16.4
16.4
12.4
6.8
6.5
8.2
6.9
4.0
9.0
1.6
2.1
2.5
1.6
8.0
8.0
12.0
16.0
16.0
12.0
Q1
Q1
Q1
Q1
NS
PW
10.5
5.6
12.0
8.0
TSSOP
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
14-Jul-2012
*All dimensions are nominal
Device
Package Type Package Drawing Pins
SPQ
Length (mm) Width (mm) Height (mm)
SN74ALVC126DGVR
SN74ALVC126DR
SN74ALVC126NSR
SN74ALVC126PWR
TVSOP
SOIC
SO
DGV
D
14
14
14
14
2000
2500
2000
2000
367.0
367.0
367.0
367.0
367.0
367.0
367.0
367.0
35.0
38.0
38.0
35.0
NS
PW
TSSOP
Pack Materials-Page 2
MECHANICAL DATA
MPDS006C – FEBRUARY 1996 – REVISED AUGUST 2000
DGV (R-PDSO-G**)
PLASTIC SMALL-OUTLINE
24 PINS SHOWN
0,23
0,13
M
0,07
0,40
24
13
0,16 NOM
4,50
4,30
6,60
6,20
Gage Plane
0,25
0°–ā8°
0,75
1
12
0,50
A
Seating Plane
0,08
0,15
0,05
1,20 MAX
PINS **
14
16
20
24
38
48
56
DIM
A MAX
A MIN
3,70
3,50
3,70
3,50
5,10
4,90
5,10
4,90
7,90
7,70
9,80
9,60
11,40
11,20
4073251/E 08/00
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion, not to exceed 0,15 per side.
D. Falls within JEDEC: 24/48 Pins – MO-153
14/16/20/56 Pins – MO-194
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46C and to discontinue any product or service per JESD48B. Buyers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All
semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale supplied at the time
of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which
have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such
components to meet such requirements.
Products
Audio
Applications
www.ti.com/audio
amplifier.ti.com
dataconverter.ti.com
www.dlp.com
Automotive and Transportation www.ti.com/automotive
Communications and Telecom www.ti.com/communications
Amplifiers
Data Converters
DLP® Products
DSP
Computers and Peripherals
Consumer Electronics
Energy and Lighting
Industrial
www.ti.com/computers
www.ti.com/consumer-apps
www.ti.com/energy
dsp.ti.com
Clocks and Timers
Interface
www.ti.com/clocks
interface.ti.com
logic.ti.com
www.ti.com/industrial
www.ti.com/medical
www.ti.com/security
Medical
Logic
Security
Power Mgmt
Microcontrollers
RFID
power.ti.com
Space, Avionics and Defense www.ti.com/space-avionics-defense
microcontroller.ti.com
www.ti-rfid.com
Video and Imaging
www.ti.com/video
OMAP Mobile Processors www.ti.com/omap
Wireless Connectivity www.ti.com/wirelessconnectivity
TI E2E Community
e2e.ti.com
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2012, Texas Instruments Incorporated
相关型号:
©2020 ICPDF网 联系我们和版权申明