SN74BCT244DBRE4 [TI]
OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS; 八路缓冲器/驱动器，具有三态输出
| 型号： | SN74BCT244DBRE4 |
| 厂家： | 
TEXAS INSTRUMENTS |
| 描述： | OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS |
| 文件： | 总17页 (文件大小：547K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SN54BCT244, SN74BCT244
OCTAL BUFFERS/DRIVERS
WITH 3-STATE OUTPUTS
SCBS006E – OCTOBER 1987 – REVISED APRIL 1994
SN54BCT244 . . . J OR W PACKAGE
SN74BCT244 . . . DB OR DW OR N PACKAGE
(TOP VIEW)
• State-of-the-Art BiCMOS Design
Significantly Reduces I
CCZ
• P-N-P Inputs Reduce DC Loading
• ESD Protection Exceeds 2000 V
1OE
1A1
2Y4
1A2
2Y3
1A3
2Y2
1A4
2Y1
GND
V
CC
1
2
3
4
5
6
7
8
9
10
20
19
18
17
16
15
14
Per MIL-STD-883C, Method 3015
2OE
1Y1
2A4
1Y2
2A3
1Y3
• 3-State Outputs Drive Bus Lines or Buffer
Memory Address Registers
• Package Options Include Plastic
Small-Outline (DW) and Shrink
Small-Outline (DB) Packages, Ceramic Chip
Carriers (FK) and Flatpacks (W), and
Standard Plastic and Ceramic 300-mil DIPs
(J, N)
13 2A2
12 1Y4
11
2A1
description
SN54BCT244 . . . FK PACKAGE
(TOP VIEW)
These octal buffers and line drivers are designed
specifically to improve both the performance and
density of 3-state memory address drivers, clock
drivers, and bus-oriented receivers and
transmitters. Taken together with the ′BCT240
and ′BCT241, these devices provide the choice of
selected combinations of inverting and
noninverting outputs, symmetrical OE (active-low
output-enable) inputs, and complementary OE
and OE inputs.
3
2
1
20 19
18
1Y1
2A4
1Y2
2A3
1Y3
1A2
2Y3
1A3
2Y2
1A4
4
5
6
7
8
17
16
15
14
9 10 11 12 13
The ′BCT244 is organized as two 4-bit buffers/line
drivers with separate output-enable (OE) inputs.
When OE is low, the device passes data from the
A inputs to the Y outputs. When OE is high, the
outputs are in the high-impedance state.
The SN54BCT244 is characterized for operation
over the full military temperature range of –55°C
to 125°C. The SN74BCT244 is characterized for
operation from 0°C to 70°C.
FUNCTION TABLE
(each buffer)
INPUTS
OUTPUT
Y
H
L
OE
A
H
L
L
L
H
X
Z
Copyright 1994, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
2–1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN54BCT244, SN74BCT244
OCTAL BUFFERS/DRIVERS
WITH 3-STATE OUTPUTS
SCBS006E – OCTOBER 1987 – REVISED APRIL 1994
†
logic symbol
logic diagram (positive logic)
1
1OE
1
1OE
EN
2
18
16
14
12
2
4
6
8
18
16
14
12
1Y1
1Y2
1Y3
1A1
1A1
1A2
1A3
1A4
1Y1
1Y2
1Y3
1Y4
4
1A2
6
1A3
19
EN
2OE
8
1Y4
1A4
11
13
15
17
9
7
5
3
2A1
2A2
2A3
2A4
2Y1
2Y2
2Y3
2Y4
19
2OE
11
9
7
5
3
2Y1
2Y2
2A1
†
This symbol is in accordance with ANSI/IEEE Std 91-1984
and IEC Publication 617-12.
13
2A2
15
2Y3
2Y4
2A3
17
2A4
‡
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage range, V
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.5 V to 7 V
CC
Input voltage range, V (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.5 V to 7 V
I
Voltage range applied to any output in the disabled or power-off state, V . . . . . . . . . . . . . . . – 0.5 V to 5.5 V
O
Voltage range applied to any output in the high state, V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.5 V to V
O
CC
Current into any output in the low state: SN54BCT244 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 mA
SN74BCT244 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 mA
Operating free-air temperature range: SN54BCT244 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 55°C to 125°C
SN74BCT244 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C
Storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 65°C to 150°C
‡
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTE 1: The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
2–2
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN54BCT244, SN74BCT244
OCTAL BUFFERS/DRIVERS
WITH 3-STATE OUTPUTS
SCBS006E – OCTOBER 1987 – REVISED APRIL 1994
recommended operating conditions
SN54BCT244
SN74BCT244
MIN NOM MAX
UNIT
MIN NOM
MAX
V
V
V
Supply voltage
4.5
2
5
5.5
4.5
2
5
5.5
V
V
CC
IH
IL
High-level input voltage
Low-level input voltage
Input clamp current
0.8
–18
–12
48
0.8
–18
–15
64
V
I
I
I
mA
mA
mA
°C
IK
High-level output current
Low-level output current
Operating free-air temperature
OH
OL
T
A
–55
125
0
70
electrical characteristics over recommended operating free-air temperature range (unless
otherwise noted)
SN54BCT244
SN74BCT244
PARAMETER
TEST CONDITIONS
UNIT
†
†
MIN TYP
MAX
MIN TYP
MAX
V
V
V
= 4.5 V,
= 4.5 V
I = –18 mA
–1.2
–1.2
V
IK
CC
I
I
I
I
I
I
= –3 mA
= –12 mA
= –15 mA
= 48 mA
= 64 mA
2.4
2
3.3
3.2
2.4
2
3.3
3.1
OH
OH
OH
OL
OL
V
OH
V
CC
0.38
0.55
V
V
CC
= 4.5 V
V
OL
0.42
0.55
0.1
20
I
I
I
I
I
I
I
I
I
V
CC
V
CC
V
CC
V
CC
V
CC
V
CC
V
CC
V
CC
V
CC
= 5.5 V,
= 5.5 V,
= 5.5 V,
= 5.5 V,
= 5.5 V,
= 5.5 V,
= 5.5 V,
= 5.5 V,
= 5.5 V,
= 5 V.
V = 7 V
I
0.1
20
mA
µA
I
V = 2.7 V
I
IH
V = 0.5 V
I
–1
–1
mA
µA
IL
V
O
V
O
V
O
= 2.7 V
= 0.5 V
= 0
50
50
OZH
–50
–50
–225
40
µA
OZL
‡
–100
–225 –100
mA
mA
mA
mA
OS
Outputs open
Outputs open
Outputs open
23
53
4
40
80
10
23
53
4
CCH
CCL
CCZ
80
10
†
‡
All typical values are at V
CC
Not more than one output should be tested at a time, and the duration of the test should not exceed one second.
2–3
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN54BCT244, SN74BCT244
OCTAL BUFFERS/DRIVERS
WITH 3-STATE OUTPUTS
SCBS006E – OCTOBER 1987 – REVISED APRIL 1994
switching characteristics (see Note 2)
V
C
= 5 V,
= 50 pF,
V
= 4.5 V to 5.5 V,
C = 50 pF,
L
CC
L
CC
R1 = 500 Ω,
R2 = 500 Ω,
T
A
R1 = 500 Ω,
R2 = 500 Ω,
†
T = MIN to MAX
A
FROM
(INPUT)
TO
(OUTPUT)
PARAMETER
UNIT
= 25°C
′BCT244
TYP
2.5
SN54BCT244 SN74BCT244
MIN
1.2
1.7
2
MAX
4.4
5
MIN
0.9
1.4
2
MAX
5.3
6
MIN
0.9
1.4
2
MAX
5
t
t
t
t
t
t
PLH
PHL
PZH
PZL
PHZ
PLZ
A
Y
Y
Y
ns
ns
ns
3.2
5.5
8.7
8.9
7.7
8.9
5.7
7.8
8.1
6.7
7.6
9
OE
OE
2
5.9
2
9.4
8
2
2
5.4
2
2
2
6.1
2
9.8
2
†
For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions.
NOTE 2: Load circuits and voltage waveforms are shown in Section 1.
2–4
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
PACKAGE OPTION ADDENDUM
www.ti.com
4-Jun-2007
PACKAGING INFORMATION
Orderable Device
Status (1)
Package Package
Pins Package Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
Qty
Type
LCCC
CDIP
CFP
Drawing
5962-9062501M2A
5962-9062501MRA
5962-9062501MSA
SN74BCT244DBLE
SN74BCT244DBR
ACTIVE
ACTIVE
FK
J
20
20
20
20
20
1
1
1
TBD
TBD
TBD
TBD
POST-PLATE N / A for Pkg Type
A42 SNPB
A42
N / A for Pkg Type
N / A for Pkg Type
Call TI
ACTIVE
W
OBSOLETE
ACTIVE
SSOP
SSOP
DB
DB
Call TI
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SN74BCT244DBRE4
SN74BCT244DBRG4
SN74BCT244DW
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
SSOP
SSOP
SOIC
SOIC
SOIC
SOIC
SOIC
SOIC
PDIP
PDIP
SO
DB
DB
DW
DW
DW
DW
DW
DW
N
20
20
20
20
20
20
20
20
20
20
20
20
20
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
25 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SN74BCT244DWE4
SN74BCT244DWG4
SN74BCT244DWR
SN74BCT244DWRE4
SN74BCT244DWRG4
SN74BCT244N
25 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
25 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
20
Pb-Free
(RoHS)
CU NIPDAU N / A for Pkg Type
SN74BCT244NE4
SN74BCT244NSR
SN74BCT244NSRE4
SN74BCT244NSRG4
N
20
Pb-Free
(RoHS)
CU NIPDAU N / A for Pkg Type
NS
NS
NS
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SO
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SO
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SNJ54BCT244FK
SNJ54BCT244J
SNJ54BCT244W
ACTIVE
ACTIVE
ACTIVE
LCCC
CDIP
CFP
FK
J
20
20
20
1
1
1
TBD
TBD
TBD
POST-PLATE N / A for Pkg Type
A42 SNPB
A42
N / A for Pkg Type
N / A for Pkg Type
W
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
4-Jun-2007
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com
16-Jul-2007
TAPE AND REEL INFORMATION
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
16-Jul-2007
Device
Package Pins
Site
Reel
Reel
A0 (mm)
B0 (mm)
K0 (mm)
P1
W
Pin1
Diameter Width
(mm) (mm) Quadrant
(mm)
330
(mm)
16
SN74BCT244DBR
SN74BCT244DWR
SN74BCT244NSR
DB
DW
NS
20
20
20
MLA
MLA
MLA
8.2
10.8
8.2
7.5
2.5
2.7
2.5
12
12
12
16
24
24
Q1
Q1
Q1
330
24
13.0
13.0
330
24
TAPE AND REEL BOX INFORMATION
Device
Package
Pins
Site
Length (mm) Width (mm) Height (mm)
SN74BCT244DBR
SN74BCT244DWR
SN74BCT244NSR
DB
DW
NS
20
20
20
MLA
MLA
MLA
346.0
333.2
333.2
346.0
333.2
333.2
33.0
31.75
31.75
Pack Materials-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com
16-Jul-2007
Pack Materials-Page 3
MECHANICAL DATA
MLCC006B – OCTOBER 1996
FK (S-CQCC-N**)
LEADLESS CERAMIC CHIP CARRIER
28 TERMINAL SHOWN
A
B
NO. OF
TERMINALS
**
18 17 16 15 14 13 12
MIN
MAX
MIN
MAX
0.342
(8,69)
0.358
(9,09)
0.307
(7,80)
0.358
(9,09)
19
20
11
10
9
20
28
44
52
68
84
0.442
(11,23)
0.458
(11,63)
0.406
(10,31)
0.458
(11,63)
21
B SQ
22
0.640
(16,26)
0.660
(16,76)
0.495
(12,58)
0.560
(14,22)
8
A SQ
23
0.739
(18,78)
0.761
(19,32)
0.495
(12,58)
0.560
(14,22)
7
24
25
6
0.938
(23,83)
0.962
(24,43)
0.850
(21,6)
0.858
(21,8)
5
1.141
(28,99)
1.165
(29,59)
1.047
(26,6)
1.063
(27,0)
26 27 28
1
2
3
4
0.080 (2,03)
0.064 (1,63)
0.020 (0,51)
0.010 (0,25)
0.020 (0,51)
0.010 (0,25)
0.055 (1,40)
0.045 (1,14)
0.045 (1,14)
0.035 (0,89)
0.045 (1,14)
0.035 (0,89)
0.028 (0,71)
0.022 (0,54)
0.050 (1,27)
4040140/D 10/96
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. This package can be hermetically sealed with a metal lid.
D. The terminals are gold plated.
E. Falls within JEDEC MS-004
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MECHANICAL DATA
MSSO002E – JANUARY 1995 – REVISED DECEMBER 2001
DB (R-PDSO-G**)
PLASTIC SMALL-OUTLINE
28 PINS SHOWN
0,38
0,22
0,65
28
M
0,15
15
0,25
0,09
5,60
5,00
8,20
7,40
Gage Plane
1
14
0,25
A
0°–ā8°
0,95
0,55
Seating Plane
0,10
2,00 MAX
0,05 MIN
PINS **
14
16
20
24
28
30
38
DIM
6,50
5,90
6,50
5,90
7,50
8,50
7,90
10,50
9,90
10,50 12,90
A MAX
A MIN
6,90
9,90
12,30
4040065 /E 12/01
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion not to exceed 0,15.
D. Falls within JEDEC MO-150
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements,
improvements, and other changes to its products and services at any time and to discontinue any product or service without notice.
Customers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s
standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this
warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily
performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should
provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask
work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services
are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such
products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under
the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is
accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an
unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties
may be subject to additional restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service
voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business
practice. TI is not responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would
reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement
specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications
of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related
requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any
applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its
representatives against any damages arising out of the use of TI products in such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is
solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in
connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products
are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any
non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Amplifiers
Data Converters
DSP
Applications
Audio
amplifier.ti.com
dataconverter.ti.com
dsp.ti.com
www.ti.com/audio
Automotive
Broadband
Digital Control
Military
www.ti.com/automotive
www.ti.com/broadband
www.ti.com/digitalcontrol
www.ti.com/military
Interface
interface.ti.com
logic.ti.com
Logic
Power Mgmt
Microcontrollers
RFID
power.ti.com
Optical Networking
Security
www.ti.com/opticalnetwork
www.ti.com/security
www.ti.com/telephony
www.ti.com/video
microcontroller.ti.com
www.ti-rfid.com
www.ti.com/lpw
Telephony
Low Power
Wireless
Video & Imaging
Wireless
www.ti.com/wireless
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2007, Texas Instruments Incorporated
相关型号：
©2020 ICPDF网 联系我们和版权申明