SN74HC04DBRE4 [TI]
HEX INVERTERS; 六路反向器型号: | SN74HC04DBRE4 |
厂家: | TEXAS INSTRUMENTS |
描述: | HEX INVERTERS |
文件: | 总21页 (文件大小:1163K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SN54HC04, SN74HC04
www.ti.com
SCLS078E –DECEMBER 1982–REVISED OCTOBER 2010
HEX INVERTERS
Check for Samples: SN54HC04, SN74HC04
1
FEATURES
•
•
•
•
•
•
Wide Operating Voltage Range of 2 V to 6 V
Outputs Can Drive Up To 10 LSTTL Loads
Low Power Consumption, 20-mA Max ICC
Typical tpd = 8 ns
±4-mA Output Drive at 5 V
Low Input Current of 1 mA Max
SN54HC04...FK PACKAGE
(TOP VIEW)
SN54HC04...J OR W PACKAGE
SN74HC04...D, DB, N, NS, OR PW PACKAGE
(TOP VIEW)
3
2
1
20 19
VCC
1
2
3
4
5
6
7
14
13
12
11
10
9
1A
1Y
18
17
16
15
14
6Y
NC
5A
NC
5Y
4
5
6
7
8
2A
NC
2Y
6A
6Y
5A
5Y
4A
4Y
2A
2Y
NC
3A
3A
3Y
9
10 11 12 13
8
GND
NC – No internal connection
DESCRIPTION/ORDERING INFORMATION
The ’HC04 devices contain six independent inverters. They perform the Boolean function Y = A in positive logic.
ORDERING INFORMATION
TA
PACKAGE(1)
ODERABLE PART NUMBER
TOP-SIDE MARKING
SN74HC04N
PDIP – N
SOIC – D
Reel of 1000
SN74HC04N
Reel of 1000
Reel of 2500
Tube of 250
SN74HC04DE4
SN74HC04DRG3
SN74HC04DT
HC04
SN74HC04NSR
SN74HC04NSRG4
SN74HC04DBR
SN74HC04DBRE4
SN74HC04PW
SOP – NS
Reel of 2000
Reel of 2000
HC04
HC04
–40°C to 85°C
SSOP – DB
Tube of 90
TSSOP – PW
Reel of 2000
Tube of 250
Reel of 1000
Reel of 900
Reel of 2200
SN74HC04PWR
SN74HC04PWT
SNJ54HC04J
HC04
CDIP – J
CFP – W
LCCC –FK
–55°C to 125°C
SNJ54HC04W
SNJ54HC04FK
(1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Copyright © 1982–2010, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
SN54HC04, SN74HC04
SCLS078E –DECEMBER 1982–REVISED OCTOBER 2010
www.ti.com
Table 1. FUNCTION TABLE
(EACH INVERTER)
INPUT
A
OUTPUT
Y
H
L
L
H
LOGIC DIAGRAM (POSITIVE LOGIC)
A
Y
Absolute Maximum Ratings(1)
over operating free-air temperature range (unless otherwise noted)
MIN
MAX
7
UNIT
V
VCC Supply voltage range
–0.5
IIK
IOK
IO
Input clamp current(2)
Output clamp current(2)
VI < 0 or VI > VCC
VO < 0
±20
±20
±25
±50
86
mA
mA
mA
mA
Continuous output current
Continuous current through VCCor GND
VO = 0 to VCC
D package
N package
NS package
PW package
80
qJA
Package thermal impedance(3)
°C/W
°C
76
113
150
Tstg
Storage temperature range
–60
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) The input and output negative-voltage ratings may be exceeded if the input and output clamp-current ratings are observed.
(3) The package thermal impedance is calculated in accordance with JESD 51-7.
Recommended Operating Conditions(1)
SN54HC04
SN74HC04
UNIT
MIN
2
NOM
MAX
MIN
2
NOM
MAX
VCC Supply voltage
5
6
5
6
V
VCC = 2 V
VCC = 4.5 V
VCC = 6 V
VCC = 2 V
VCC = 4.5 V
VCC = 6 V
1.5
3.15
4.2
1.5
3.15
4.2
VIH
High-level input voltage
V
V
0.5
1.35
1.8
0.5
1.35
1.8
VIL
Low-level input voltage
VI
Input voltage
0
0
VCC
VCC
1000
500
400
125
0
0
VCC
VCC
1000
500
400
85
V
V
VO
Output voltage
VCC = 2 V
VCC = 4.5 V
VCC = 6 V
Δt/Δv Input transition rise or fall rate
ns
°C
TA
Operating free-air temperature
–55
–40
(1) All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
2
Submit Documentation Feedback
Copyright © 1982–2010, Texas Instruments Incorporated
Product Folder Link(s): SN54HC04, SN74HC04
SN54HC04, SN74HC04
www.ti.com
SCLS078E –DECEMBER 1982–REVISED OCTOBER 2010
Electrical Characteristics
over operating free-air temperature range (unless otherwise noted)
TA = 25°C
SN54HC04
SN74HC04
MIN MAX
1.9
PARAMETER
TEST CONDITIONS
VCC
UNIT
MIN
TYP
MAX
MIN
1.9
4.4
5.9
3.7
5.2
MAX
2 V
4.5 V
6 V
1.9 1.998
4.4 4.499
5.9 5.999
IOH = –20 mA
4.4
VI = VIH or
VOH
5.9
V
VIL
IOH = –4 mA
4.5 V
6 V
3.98
5.48
4.3
5.8
3.84
IOH = –5.2 mA
5.34
2 V
0.002
0.001
0.001
0.17
0.1
0.1
0.1
0.1
0.1
IOL = 20 mA
4.5 V
6 V
0.1
0.1
VI = VIH or
VIL
VOL
0.1
0.1
V
IOL = 4 mA
4.5 V
6 V
0.26
0.26
±100
2
0.4
0.33
0.33
±1000
20
IOL = 5.2 mA
0.15
0.4
II
VI = VCC or 0
6 V
±0.1
±1000
40
nA
mA
pF
ICC
Ci
VI = VCC or 0, IO = 0
6 V
2 V to 6 V
3
10
10
10
Switching Characteristics
over operating free-air temperature range, CL = 50 pF (unless otherwise noted) (see Figure 1)
TA = 25°C
SN54HC04
SN74HC04
MIN MAX
120
FROM
(INPUT)
TO
(OUTPUT)
PARAMETER
VCC
UNIT
MIN
TYP
45
9
MAX
95
MIN MAX
2 V
4.5 V
6 V
125
29
tpd
A
Y
Y
19
24
20
95
19
16
ns
8
16
25
2 V
38
8
75
110
22
tt
4.5 V
6 V
15
ns
6
13
19
Operating Characteristics
TA = 25°C
PARAMETER
TEST CONDITIONS
TYP
UNIT
pF
Cpd
Power dissipation capacitance per inverter
No load
20
Copyright © 1982–2010, Texas Instruments Incorporated
Submit Documentation Feedback
3
Product Folder Link(s): SN54HC04, SN74HC04
SN54HC04, SN74HC04
SCLS078E –DECEMBER 1982–REVISED OCTOBER 2010
www.ti.com
PARAMETER MEASURMENT INFORMATION
VCC
0 V
Test
Point
Input
From Output
Under Test
50%
50%
CL = 50 pF
(see Note A)
tPHL
tPLH
VOH
90%
90%
In-Phase
Output
50%
10%
50%
10%
LOAD CIRCUIT
VOL
tr
tf
VCC
0 V
tPHL
90%
tPLH
90%
90%
50%
10%
50%
10%
VOH
VOL
Input
90%
Out-of-Phase
Output
50%
10%
50%
10%
tr
tf
tf
tr
VOLTAGE WAVEFORMS
INPUT RISE AND FALL TIMES
VOLTAGE WAVEFORMS
PROPAGATION DELAY AND OUTPUT TRANSITION TIMES
NOTES: A. CL includes probe and test-fixture capacitance.
B. Phase relationships between waveforms were chosen arbitrarily. All input pulses are supplied by generators having the following
characteristics: PRR ≤ 1 MHz, ZO = 50 Ω, tr = 6 ns, tf = 6 ns.
C. The outputs are measured one at a time with one input transition per measurement.
D. tPLH and tPHL are the same as tpd.
Figure 1. Load Circuit and Voltage Waveforms
4
Submit Documentation Feedback
Copyright © 1982–2010, Texas Instruments Incorporated
Product Folder Link(s): SN54HC04, SN74HC04
PACKAGE OPTION ADDENDUM
www.ti.com
24-Jan-2013
PACKAGING INFORMATION
Orderable Device
Status Package Type Package Pins Package Qty
Eco Plan Lead/Ball Finish
MSL Peak Temp
Op Temp (°C)
Top-Side Markings
Samples
Drawing
(1)
(2)
(3)
(4)
5962-8409801VCA
ACTIVE
CDIP
CFP
J
14
14
20
1
1
1
TBD
TBD
TBD
A42
A42
N / A for Pkg Type
N / A for Pkg Type
Call TI
-55 to 125 5962-8409801VC
A
SNV54HC04J
5962-8409801VDA
84098012A
ACTIVE
ACTIVE
W
-55 to 125 5962-8409801VD
A
SNV54HC04W
LCCC
FK
Call TI
-55 to 125 84098012A
SNJ54HC
04FK
8409801CA
ACTIVE
ACTIVE
ACTIVE
ACTIVE
NRND
CDIP
CFP
J
W
FK
J
14
14
20
14
14
20
14
14
1
1
1
1
1
1
1
1
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
Call TI
Call TI
Call TI
-55 to 125 8409801CA
SNJ54HC04J
8409801DA
Call TI
-55 to 125 8409801DA
SNJ54HC04W
JM38510/65701B2A
JM38510/65701BCA
JM38510/65701BDA
M38510/65701B2A
M38510/65701BCA
M38510/65701BDA
LCCC
CDIP
CFP
POST-PLATE
A42
N / A for Pkg Type
N / A for Pkg Type
N / A for Pkg Type
N / A for Pkg Type
N / A for Pkg Type
N / A for Pkg Type
-55 to 125 JM38510/
65701B2A
-55 to 125 JM38510/
65701BCA
W
FK
J
A42
-55 to 125 JM38510/
65701BDA
ACTIVE
ACTIVE
NRND
LCCC
CDIP
CFP
POST-PLATE
A42
-55 to 125 JM38510/
65701B2A
-55 to 125 JM38510/
65701BCA
W
A42
-55 to 125 JM38510/
65701BDA
SN54HC04J
SN74HC04D
ACTIVE
ACTIVE
CDIP
SOIC
J
14
14
1
A42
N / A for Pkg Type
-55 to 125 SN54HC04J
D
50
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
-40 to 85
-40 to 85
-40 to 85
HC04
HC04
HC04
HC04
SN74HC04DBR
SN74HC04DBRE4
SN74HC04DBRG4
ACTIVE
ACTIVE
ACTIVE
SSOP
SSOP
SSOP
DB
DB
DB
14
14
14
2000
2000
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
CU NIPDAU
CU NIPDAU
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Green (RoHS
& no Sb/Br)
Green (RoHS
& no Sb/Br)
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
24-Jan-2013
Orderable Device
Status Package Type Package Pins Package Qty
Eco Plan Lead/Ball Finish
MSL Peak Temp
Op Temp (°C)
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
Top-Side Markings
Samples
Drawing
(1)
(2)
(3)
(4)
SN74HC04DE4
SN74HC04DG4
SN74HC04DR
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
SOIC
SOIC
SOIC
SOIC
SOIC
SOIC
SOIC
SOIC
SOIC
PDIP
D
D
D
D
D
D
D
D
D
N
14
14
14
14
14
14
14
14
14
14
50
50
Green (RoHS
& no Sb/Br)
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU SN
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
N / A for Pkg Type
HC04
Green (RoHS
& no Sb/Br)
HC04
2500
2500
2500
2500
250
250
250
25
Green (RoHS
& no Sb/Br)
HC04
SN74HC04DRE4
SN74HC04DRG3
SN74HC04DRG4
SN74HC04DT
Green (RoHS
& no Sb/Br)
HC04
Green (RoHS
& no Sb/Br)
HC04
Green (RoHS
& no Sb/Br)
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
HC04
Green (RoHS
& no Sb/Br)
HC04
SN74HC04DTE4
SN74HC04DTG4
SN74HC04N
Green (RoHS
& no Sb/Br)
HC04
Green (RoHS
& no Sb/Br)
HC04
Pb-Free
(RoHS)
SN74HC04N
SN74HC04N3
OBSOLETE
ACTIVE
PDIP
PDIP
N
N
14
14
TBD
Call TI
Call TI
-40 to 85
-40 to 85
SN74HC04NE4
25
2000
2000
90
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
SN74HC04N
HC04
SN74HC04NSR
SN74HC04NSRG4
SN74HC04PW
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
SO
NS
NS
14
14
14
14
14
Green (RoHS
& no Sb/Br)
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
SO
Green (RoHS
& no Sb/Br)
HC04
TSSOP
TSSOP
TSSOP
PW
PW
PW
Green (RoHS
& no Sb/Br)
HC04
SN74HC04PWE4
SN74HC04PWG4
90
Green (RoHS
& no Sb/Br)
HC04
90
Green (RoHS
& no Sb/Br)
HC04
SN74HC04PWLE
SN74HC04PWR
OBSOLETE
ACTIVE
TSSOP
TSSOP
PW
PW
14
14
TBD
Call TI
Call TI
-40 to 85
-40 to 85
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
HC04
Addendum-Page 2
PACKAGE OPTION ADDENDUM
www.ti.com
24-Jan-2013
Orderable Device
Status Package Type Package Pins Package Qty
Eco Plan Lead/Ball Finish
MSL Peak Temp
Op Temp (°C)
Top-Side Markings
Samples
Drawing
(1)
(2)
(3)
(4)
SN74HC04PWRE4
SN74HC04PWRG4
SN74HC04PWT
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
TSSOP
TSSOP
TSSOP
TSSOP
TSSOP
LCCC
PW
PW
PW
PW
PW
FK
14
14
14
14
14
20
2000
2000
250
250
250
1
Green (RoHS
& no Sb/Br)
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
POST-PLATE
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
N / A for Pkg Type
-40 to 85 HC04
Green (RoHS
& no Sb/Br)
-40 to 85
HC04
HC04
HC04
HC04
Green (RoHS
& no Sb/Br)
-40 to 85
SN74HC04PWTE4
SN74HC04PWTG4
SNJ54HC04FK
Green (RoHS
& no Sb/Br)
-40 to 85
Green (RoHS
& no Sb/Br)
-40 to 85
TBD
-55 to 125 84098012A
SNJ54HC
04FK
SNJ54HC04J
SNJ54HC04W
ACTIVE
ACTIVE
CDIP
CFP
J
14
14
1
1
TBD
TBD
A42
A42
N / A for Pkg Type
N / A for Pkg Type
-55 to 125 8409801CA
SNJ54HC04J
W
-55 to 125 8409801DA
SNJ54HC04W
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4) Only one of markings shown within the brackets will appear on the physical device.
Addendum-Page 3
PACKAGE OPTION ADDENDUM
www.ti.com
24-Jan-2013
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
OTHER QUALIFIED VERSIONS OF SN54HC04, SN54HC04-SP, SN74HC04 :
Catalog: SN74HC04, SN54HC04
•
Automotive: SN74HC04-Q1, SN74HC04-Q1
•
Military: SN54HC04
•
Space: SN54HC04-SP
•
NOTE: Qualified Version Definitions:
Catalog - TI's standard catalog product
•
Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects
•
Military - QML certified for Military and Defense Applications
•
Space - Radiation tolerant, ceramic packaging and qualified for use in Space-based application
•
Addendum-Page 4
PACKAGE MATERIALS INFORMATION
www.ti.com
8-Apr-2013
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
B0
K0
P1
W
Pin1
Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant
(mm) W1 (mm)
SN74HC04DBR
SN74HC04DR
SSOP
SOIC
DB
D
14
14
14
14
14
14
14
14
2000
2500
2500
2500
2500
250
330.0
330.0
330.0
330.0
330.0
330.0
330.0
330.0
16.4
16.4
16.4
16.4
16.4
16.4
12.4
12.4
8.2
6.5
6.5
6.5
6.5
6.5
6.9
6.9
6.6
9.0
9.0
9.0
9.0
9.0
5.6
5.6
2.5
2.1
2.1
2.1
2.1
2.1
1.6
1.6
12.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
16.0
16.0
16.0
16.0
16.0
16.0
12.0
12.0
Q1
Q1
Q1
Q1
Q1
Q1
Q1
Q1
SN74HC04DR
SOIC
D
SN74HC04DRG4
SN74HC04DRG4
SN74HC04DT
SOIC
D
SOIC
D
SOIC
D
SN74HC04PWR
SN74HC04PWT
TSSOP
TSSOP
PW
PW
2000
250
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
8-Apr-2013
*All dimensions are nominal
Device
Package Type Package Drawing Pins
SPQ
Length (mm) Width (mm) Height (mm)
SN74HC04DBR
SN74HC04DR
SSOP
SOIC
DB
D
14
14
14
14
14
14
14
14
2000
2500
2500
2500
2500
250
367.0
367.0
333.2
367.0
333.2
367.0
367.0
367.0
367.0
367.0
345.9
367.0
345.9
367.0
367.0
367.0
38.0
38.0
28.6
38.0
28.6
38.0
35.0
35.0
SN74HC04DR
SOIC
D
SN74HC04DRG4
SN74HC04DRG4
SN74HC04DT
SOIC
D
SOIC
D
SOIC
D
SN74HC04PWR
SN74HC04PWT
TSSOP
TSSOP
PW
PW
2000
250
Pack Materials-Page 2
MECHANICAL DATA
MSSO002E – JANUARY 1995 – REVISED DECEMBER 2001
DB (R-PDSO-G**)
PLASTIC SMALL-OUTLINE
28 PINS SHOWN
0,38
0,22
0,65
28
M
0,15
15
0,25
0,09
5,60
5,00
8,20
7,40
Gage Plane
1
14
0,25
A
0°–ā8°
0,95
0,55
Seating Plane
0,10
2,00 MAX
0,05 MIN
PINS **
14
16
20
24
28
30
38
DIM
6,50
5,90
6,50
5,90
7,50
8,50
7,90
10,50
9,90
10,50 12,90
A MAX
A MIN
6,90
9,90
12,30
4040065 /E 12/01
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion not to exceed 0,15.
D. Falls within JEDEC MO-150
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.
Products
Applications
Audio
www.ti.com/audio
amplifier.ti.com
dataconverter.ti.com
www.dlp.com
Automotive and Transportation www.ti.com/automotive
Communications and Telecom www.ti.com/communications
Amplifiers
Data Converters
DLP® Products
DSP
Computers and Peripherals
Consumer Electronics
Energy and Lighting
Industrial
www.ti.com/computers
www.ti.com/consumer-apps
www.ti.com/energy
dsp.ti.com
Clocks and Timers
Interface
www.ti.com/clocks
interface.ti.com
logic.ti.com
www.ti.com/industrial
www.ti.com/medical
Medical
Logic
Security
www.ti.com/security
Power Mgmt
Microcontrollers
RFID
power.ti.com
Space, Avionics and Defense
Video and Imaging
www.ti.com/space-avionics-defense
www.ti.com/video
microcontroller.ti.com
www.ti-rfid.com
www.ti.com/omap
OMAP Applications Processors
Wireless Connectivity
TI E2E Community
e2e.ti.com
www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2013, Texas Instruments Incorporated
相关型号:
©2020 ICPDF网 联系我们和版权申明