SN74LV125ATPWTG4 [TI]
QUADRUPLE BUS BUFFER GATE WITH 3-STATE OUTPUTS; 四路总线缓冲器闸具有三态输出型号: | SN74LV125ATPWTG4 |
厂家: | TEXAS INSTRUMENTS |
描述: | QUADRUPLE BUS BUFFER GATE WITH 3-STATE OUTPUTS |
文件: | 总19页 (文件大小:861K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SN74LV125AT
QUADRUPLE BUS BUFFER GATE
WITH 3-STATE OUTPUTS
www.ti.com
SCES629A–MAY 2005–REVISED AUGUST 2005
FEATURES
•
•
•
•
Inputs Are TTL-Voltage Compatible
4.5-V to 5.5-V VCC Operation
Typical tpd of 3.8 ns at 5 V
•
•
•
Ioff Supports Partial-Power-Down Mode
Operation
Latch-Up Performance Exceeds 250 mA Per
JESD 17
Typical VOLP (Output Ground Bounce)
<0.8 V at VCC = 5 V, TA = 25°C
ESD Protection Exceeds JESD 22
– 2000-V Human-Body Model (A114-A)
– 200-V Machine Model (A115-A)
•
•
Typical VOHV (Output VOH Undershoot)
>2.3 V at VCC = 5 V, TA = 25°C
Support Mixed-Mode Voltage Operation on All
Ports
– 1000-V Charged-Device Model (C101)
XXXX
XXXX
RGY PACKAGE
(TOP VIEW)
D, DB, NS, OR PW PACKAGE
(TOP VIEW)
1OE
1A
V
CC
1
2
3
4
5
6
7
14
13
12
11
1
14
4OE
4A
1A
1Y
13 4OE
1Y
2
3
4
5
6
12
11
10
9
4A
2OE
2A
4Y
2OE
2A
4Y
3OE
3A
10 3OE
9
8
2Y
3A
3Y
2Y
GND
7
8
DESCRIPTION/ORDERING INFORMATION
The SN74LV125AT is a quadruple bus buffer gate. This device features independent line drivers with 3-state
outputs. Each output is disabled when the associated output-enable (OE) input is high.
To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup
resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs,
preventing damaging current backflow through the device when it is powered down.
ORDERING INFORMATION
TA
PACKAGE(1)
ORDERABLE PART NUMBER
SN74LV125ATRGYR
SN74LV125ATD
TOP-SIDE MARKING
VV125
QFN – RGY
SOIC – D
Reel of 1000
Tube of 50
Reel of 2500
Tube of 50
Reel of 2000
Tube of 80
Reel of 2000
Tube of 90
Reel of 2000
Reel of 250
SN74LV125ATDR
SN74LV125ATNS
SOP – NS
SN74LV125ATNSR
SN74LV125ATDB
–40°C to 85°C
LV125AT
SSOP – DB
SN74LV125ATDBR
SN74LV125ATPW
SN74LV125ATPWR
SN74LV125ATPWT
TSSOP – PW
(1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Copyright © 2005, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
SN74LV125AT
QUADRUPLE BUS BUFFER GATE
WITH 3-STATE OUTPUTS
www.ti.com
SCES629A–MAY 2005–REVISED AUGUST 2005
FUNCTION TABLE
(EACH BUFFER)
INPUTS
OUTPUT
Y
OE
L
A
H
L
H
L
L
H
X
Z
LOGIC DIAGRAM (POSITIVE LOGIC)
10
1
3OE
1OE
9
8
2
3
6
3A
3Y
4Y
1A
1Y
2Y
13
12
4
4OE
4A
2OE
11
5
2A
Absolute Maximum Ratings(1)
over operating free-air temperature range (unless otherwise noted)
MIN
–0.5
–0.5
–0.5
–0.5
MAX
UNIT
VCC
VI
Supply voltage range
Input voltage range(2)
Voltage range applied to any output in the high-impedance or power-off state(2)
Output voltage range(2)(3)
7
V
7
7
V
VO
VO
IIK
V
VCC + 0.5
–20
±50
±35
±70
86
V
Input clamp current
VI < 0
mA
mA
mA
mA
IOK
IO
Output clamp current
VO < 0 or VO > VCC
VO = 0 to VCC
Continuous output current
Continuous current through VCC or GND
D package(4)
DB package(4)
NS package(4)
PW package(4)
RGY package(5)
96
θJA
Package thermal impedance
76
°C/W
113
47
Tstg
Storage temperature range
–65
150
°C
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
(3) This value is limited to 5.5 V maximum.
(4) The package thermal impedance is calculated in accordance with JESD 51-7.
(5) The package thermal impedance is calculated in accordance with JESD 51-5.
2
SN74LV125AT
QUADRUPLE BUS BUFFER GATE
WITH 3-STATE OUTPUTS
www.ti.com
SCES629A–MAY 2005–REVISED AUGUST 2005
Recommended Operating Conditions(1)
MIN
4.5
2
MAX
UNIT
VCC
VIH
VIL
VI
Supply voltage
5.5
V
V
V
V
High-level input voltage
Low-level input voltage
Input voltage
VCC = 4.5 V to 5.5 V
VCC = 4.5 V to 5.5 V
0.8
5.5
VCC
5.5
–16
16
0
0
0
High or low state
3-state
VO
Output voltage
V
IOH
IOL
High-level output current
VCC = 4.5 V to 5.5 V
VCC = 4.5 V to 5.5 V
VCC = 4.5 V to 5.5 V
mA
mA
ns/V
°C
Low-level output current
∆t/∆v
TA
Input transition rise or fall rate
Operating free-air temperature
20
–40
125
(1) All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
Electrical Characteristics
over recommended operating free-air temperature range (unless otherwise noted)
TA = –40°C
to 85°C
TA = –40°C
to 125°C
TA = 25°C
TYP MAX
PARAMETER
TEST CONDITIONS
IOH = –50 µA
VCC
UNIT
MIN
4.4
MIN MAX
MIN MAX
4.5 V
4.5 V
4.5
4.4
3.8
0.1
0.55
±1
4.4
3.8
0.1
0.55
±1
VOH
V
V
IOH = –16 mA
3.8
IOL = 50 µA
4.5 V
0
0.1
0.55
±0.1
±0.25
2
VOL
IOL = 16 mA
4.5 V
II
VI = 5.5 V or GND
VO = VCC or GND
VI = VCC or GND, IO = 0
0 to 5.5 V
5.5 V
µA
µA
µA
IOZ
ICC
±2.5
20
±2.5
20
5.5 V
One input at 3.4 V,
Other inputs at VCC or GND
(1)
∆ICC
5.5 V
0
1.35
0.5
1.5
5
1.5
5
mA
Ioff
Ci
VI or VO = 0 to 5.5 V
VI = VCC or GND
µA
2
pF
(1) This is the increase in supply current for each input at one of the specified TTL voltage levels, rather than 0 V or VCC
.
Switching Characteristics
over recommended operating free-air temperature range, VCC = 5 V ± 0.5 V (unless otherwise noted) (see Figure 1)
TA = –40°C
to 85°C
TA = –40°C
to 125°C
TA = 25°C
MIN TYP MAX
FROM
(INPUT)
TO
(OUTPUT)
LOAD
CAPACITANCE
PARAMETER
UNIT
MIN MAX
MIN MAX
tpd
ten
A
Y
Y
Y
Y
Y
Y
CL = 15 pF
CL = 15 pF
CL = 15 pF
CL = 50 pF
CL = 50 pF
CL = 50 pF
CL = 50 pF
1.9
2
3.8
3.6
3.2
5.3
5.1
6.1
5.5
5.1
6.8
7.5
7.1
8.8
1
1
1
1
1
1
1
6.5
6
1
1
1
1
1
1
8.5
7.5
10
ns
ns
ns
ns
ns
ns
ns
OE
OE
A
tdis
tpd
1.5
2.9
2.8
2.8
8
8.5
8
10.5
9.5
10
ten
OE
OE
tdis
tsk(o)
10
1
1
3
SN74LV125AT
QUADRUPLE BUS BUFFER GATE
WITH 3-STATE OUTPUTS
www.ti.com
SCES629A–MAY 2005–REVISED AUGUST 2005
Noise Characteristics(1)
VCC = 5 V, CL = 50 pF, TA = 25°C
MIN
TYP
1.1
–0.3
3
MAX
1.5
UNIT
VOL(P)
VOL(V)
VOH(V)
VIH(D)
VIL(D)
Quiet output, maximum dynamic VOL
Quiet output, minimum dynamic VOL
Quiet output, minimum dynamic VOH
High-level dynamic input voltage
Low-level dynamic input voltage
V
–0.8
V
V
V
V
2
0.8
(1) Characteristics are for surface-mount packages only.
Operating Characteristics
VCC = 5 V, TA - 25°C
PARAMETER
TEST CONDITIONS
TYP UNIT
16 pF
Cpd
Power dissipation capacitance
Outputs enabled
CL = 50 pF, f = 10 MHz
4
SN74LV125AT
QUADRUPLE BUS BUFFER GATE
WITH 3-STATE OUTPUTS
www.ti.com
SCES629A–MAY 2005–REVISED AUGUST 2005
PARAMETER MEASUREMENT INFORMATION
V
CC
S1
Open
GND
R
L
= 1 kΩ
TEST
/t
S1
From Output
Under Test
Test
Point
From Output
Under Test
t
t
Open
PLH PHL
C
L
C
L
t
/t
V
CC
PLZ PZL
(see Note A)
(see Note A)
/t
GND
PHZ PZH
Open Drain
V
CC
LOAD CIRCUIT FOR
LOAD CIRCUIT FOR
TOTEM-POLE OUTPUTS
3-STATE AND OPEN-DRAIN OUTPUTS
3 V
0 V
1.5 V
Timing Input
t
w
t
h
3 V
t
su
3 V
0 V
1.5 V
1.5 V
Input
Input
1.5 V
1.5 V
Data Input
0 V
VOLTAGE WAVEFORMS
PULSE DURATION
VOLTAGE WAVEFORMS
SETUP AND HOLD TIMES
3 V
0 V
3 V
Output
Control
1.5 V
1.5 V
1.5 V
1.5 V
0 V
t
t
PZL
PLZ
t
t
t
PHL
PLH
Output
Waveform 1
≈V
V
CC
OH
In-Phase
Output
50% V
50% V
50% V
CC
50% V
CC
CC
V
S1 at V
CC
V
V
+ 0.3 V
OL
V
OL
OL
(see Note B)
t
t
t
PZH
PHZ
PHL
PLH
Output
Waveform 2
S1 at GND
V
OH
V
OH
Out-of-Phase
Output
− 0.3 V
OH
50% V
50% V
CC
CC
CC
V
≈0 V
(see Note B)
OL
VOLTAGE WAVEFORMS
PROPAGATION DELAY TIMES
INVERTING AND NONINVERTING OUTPUTS
VOLTAGE WAVEFORMS
ENABLE AND DISABLE TIMES
LOW- AND HIGH-LEVEL ENABLING
NOTES: A. C includes probe and jig capacitance.
L
B. Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control.
C. All input pulses are supplied by generators having the following characteristics: PRR ≤ 1 MHz, Z = 50 Ω, t ≤ 3 ns, t ≤ 3 ns.
O
r
f
D. The outputs are measured one at a time, with one input transition per measurement.
E.
F.
G.
t
t
t
and t
and t
and t
are the same as t
.
dis
.
PLZ
PZL
PHL
PHZ
are the same as t
PZH
en
are the same as t .
PLH pd
H. All parameters and waveforms are not applicable to all devices.
Figure 1. Load Circuits and Voltage Waveforms
5
PACKAGE OPTION ADDENDUM
www.ti.com
8-Dec-2009
PACKAGING INFORMATION
Orderable Device
SN74LV125ATD
Status (1)
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
Package Package
Pins Package Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
Qty
Type
Drawing
SOIC
D
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
50 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SN74LV125ATDB
SSOP
SSOP
SSOP
SSOP
SSOP
SSOP
SOIC
SOIC
SOIC
SOIC
SOIC
SO
DB
DB
DB
DB
DB
DB
D
80 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SN74LV125ATDBE4
SN74LV125ATDBG4
SN74LV125ATDBR
SN74LV125ATDBRE4
SN74LV125ATDBRG4
SN74LV125ATDE4
SN74LV125ATDG4
SN74LV125ATDR
80 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
80 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
50 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
D
50 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
D
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SN74LV125ATDRE4
SN74LV125ATDRG4
SN74LV125ATNS
D
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
D
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
NS
NS
NS
NS
NS
NS
PW
PW
PW
PW
PW
PW
PW
50 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SN74LV125ATNSE4
SN74LV125ATNSG4
SN74LV125ATNSR
SN74LV125ATNSRE4
SN74LV125ATNSRG4
SN74LV125ATPW
SO
50 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SO
50 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SO
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SO
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SO
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
TSSOP
TSSOP
TSSOP
TSSOP
TSSOP
TSSOP
TSSOP
90 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SN74LV125ATPWE4
SN74LV125ATPWG4
SN74LV125ATPWR
SN74LV125ATPWRE4
SN74LV125ATPWRG4
SN74LV125ATPWT
90 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
90 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
8-Dec-2009
Orderable Device
Status (1)
ACTIVE
ACTIVE
ACTIVE
ACTIVE
Package Package
Pins Package Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
Qty
Type
Drawing
SN74LV125ATPWTE4
SN74LV125ATPWTG4
SN74LV125ATRGYR
SN74LV125ATRGYRG4
TSSOP
PW
14
14
14
14
250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
TSSOP
VQFN
VQFN
PW
RGY
RGY
250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
3000 Green (RoHS & CU NIPDAU Level-2-260C-1 YEAR
no Sb/Br)
3000 Green (RoHS & CU NIPDAU Level-2-260C-1 YEAR
no Sb/Br)
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com
14-Jul-2012
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
B0
K0
P1
W
Pin1
Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant
(mm) W1 (mm)
SN74LV125ATDBR
SN74LV125ATDR
SN74LV125ATNSR
SN74LV125ATPWR
SN74LV125ATPWT
SN74LV125ATRGYR
SSOP
SOIC
DB
D
14
14
14
14
14
14
2000
2500
2000
2000
250
330.0
330.0
330.0
330.0
330.0
330.0
16.4
16.4
16.4
12.4
12.4
12.4
8.2
6.5
8.2
6.9
6.9
3.75
6.6
9.0
2.5
2.1
2.5
1.6
1.6
1.15
12.0
8.0
16.0
16.0
16.0
12.0
12.0
12.0
Q1
Q1
Q1
Q1
Q1
Q1
SO
NS
10.5
5.6
12.0
8.0
TSSOP
TSSOP
VQFN
PW
PW
RGY
5.6
8.0
3000
3.75
8.0
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
14-Jul-2012
*All dimensions are nominal
Device
Package Type Package Drawing Pins
SPQ
Length (mm) Width (mm) Height (mm)
SN74LV125ATDBR
SN74LV125ATDR
SN74LV125ATNSR
SN74LV125ATPWR
SN74LV125ATPWT
SN74LV125ATRGYR
SSOP
SOIC
DB
D
14
14
14
14
14
14
2000
2500
2000
2000
250
367.0
367.0
367.0
367.0
367.0
367.0
367.0
367.0
367.0
367.0
367.0
367.0
38.0
38.0
38.0
35.0
35.0
35.0
SO
NS
TSSOP
TSSOP
VQFN
PW
PW
RGY
3000
Pack Materials-Page 2
MECHANICAL DATA
MSSO002E – JANUARY 1995 – REVISED DECEMBER 2001
DB (R-PDSO-G**)
PLASTIC SMALL-OUTLINE
28 PINS SHOWN
0,38
0,22
0,65
28
M
0,15
15
0,25
0,09
5,60
5,00
8,20
7,40
Gage Plane
1
14
0,25
A
0°–ā8°
0,95
0,55
Seating Plane
0,10
2,00 MAX
0,05 MIN
PINS **
14
16
20
24
28
30
38
DIM
6,50
5,90
6,50
5,90
7,50
8,50
7,90
10,50
9,90
10,50 12,90
A MAX
A MIN
6,90
9,90
12,30
4040065 /E 12/01
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion not to exceed 0,15.
D. Falls within JEDEC MO-150
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which
have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such
components to meet such requirements.
Products
Applications
Audio
www.ti.com/audio
amplifier.ti.com
dataconverter.ti.com
www.dlp.com
Automotive and Transportation www.ti.com/automotive
Communications and Telecom www.ti.com/communications
Amplifiers
Data Converters
DLP® Products
DSP
Computers and Peripherals
Consumer Electronics
Energy and Lighting
Industrial
www.ti.com/computers
www.ti.com/consumer-apps
www.ti.com/energy
dsp.ti.com
Clocks and Timers
Interface
www.ti.com/clocks
interface.ti.com
logic.ti.com
www.ti.com/industrial
www.ti.com/medical
Medical
Logic
Security
www.ti.com/security
Power Mgmt
Microcontrollers
RFID
power.ti.com
Space, Avionics and Defense
Video and Imaging
www.ti.com/space-avionics-defense
www.ti.com/video
microcontroller.ti.com
www.ti-rfid.com
www.ti.com/omap
OMAP Applications Processors
Wireless Connectivity
TI E2E Community
e2e.ti.com
www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2012, Texas Instruments Incorporated
相关型号:
SN74LV125DBR
LV/LV-A/LVX/H SERIES, QUAD 1-BIT DRIVER, TRUE OUTPUT, PDSO14, PLASTIC, SSOP-14
ROCHESTER
©2020 ICPDF网 联系我们和版权申明