SN74LVC861APWG4 [TI]
LVC/LCX/Z SERIES, 10-BIT TRANSCEIVER, TRUE OUTPUT, PDSO24, GREEN, PLASTIC, TSSOP-24;型号: | SN74LVC861APWG4 |
厂家: | TEXAS INSTRUMENTS |
描述: | LVC/LCX/Z SERIES, 10-BIT TRANSCEIVER, TRUE OUTPUT, PDSO24, GREEN, PLASTIC, TSSOP-24 光电二极管 输出元件 逻辑集成电路 |
文件: | 总16页 (文件大小:627K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SN74LVC861A
10-BIT BUS TRANSCEIVER
WITH 3-STATE OUTPUTS
www.ti.com
SCAS309I–MARCH 1993–REVISED FEBRUARY 2005
FEATURES
DB, DGV, DW, NS, OR PW PACKAGE
(TOP VIEW)
•
•
•
•
Operates From 1.65 V to 3.6 V
Inputs Accept Voltages to 5.5 V
Max tpd of 6.4 ns at 3.3 V
1
24
23
22
21
20
19
18
17
16
15
14
13
OEBA
A1
V
CC
2
B1
Typical VOLP (Output Ground Bounce)
3
A2
B2
<0.8 V at VCC = 3.3 V, TA = 25°C
4
A3
B3
•
•
Typical VOHV (Output VOH Undershoot)
>2 V at VCC = 3.3 V, TA = 25°C
5
A4
B4
6
A5
B5
7
Supports Mixed-Mode Signal Operation on
All Ports (5-V Input/Output Voltage With
A6
B6
8
A7
B7
3.3-V VCC
)
9
A8
B8
10
11
12
A9
A10
GND
B9
B10
OEAB
•
•
•
Ioff Supports Partial-Power-Down Mode
Operation
Latch-Up Performance Exceeds 250 mA Per
JESD 17
ESD Protection Exceeds JESD 22
– 2000-V Human-Body Model (A114-A)
– 200-V Machine Model (A115-A)
– 1000-V Charged-Device Model (C101)
DESCRIPTION/ORDERING INFORMATION
This 10-bit bus transceiver is designed for 1.65-V to 3.6-V VCC operation.
The SN74LVC861A is designed for asynchronous communication between data buses. The control-function
implementation allows for maximum flexibility in timing.
This device allows data transmission from the A bus to the B bus or from the B bus to the A bus, depending on
the logic levels at the output-enable (OEAB and OEBA) inputs.
Inputs can be driven from either 3.3-V or 5-V devices. This feature allows the use of this device as a translator in
a mixed 3.3-V/5-V system environment.
To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup
resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs,
preventing damaging current backflow through the device when it is powered down.
ORDERING INFORMATION
TA
PACKAGE(1)
ORDERABLE PART NUMBER
SN74LVC861ADW
TOP-SIDE MARKING
LVC861A
Tube of 25
SOIC – DW
Reel of 2000
Reel of 2000
Reel of 2000
Tube of 60
SN74LVC861ADWR
SN74LVC861ANSR
SN74LVC861ADBR
SN74LVC861APW
SOP – NS
LVC861A
LC861A
SSOP – DB
–40°C to 85°C
TSSOP – PW
Reel of 2000
Reel of 250
Reel of 2000
SN74LVC861APWR
SN74LVC861APWT
SN74LVC861ADGVR
LC861A
TVSOP – DGV
LC861A
(1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Copyright © 1993–2005, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
SN74LVC861A
10-BIT BUS TRANSCEIVER
WITH 3-STATE OUTPUTS
www.ti.com
SCAS309I–MARCH 1993–REVISED FEBRUARY 2005
FUNCTION TABLE
INPUTS
OPERATION
OEAB
OEBA
L
H
H
H
L
A data to B bus
B data to A bus
Isolation
H
Latch A and B
(A = B)
L
L
LOGIC DIAGRAM (POSITIVE LOGIC)
1
OEBA
OEAB
13
2
23
A1
B1
To Nine Other Channels
2
SN74LVC861A
10-BIT BUS TRANSCEIVER
WITH 3-STATE OUTPUTS
www.ti.com
SCAS309I–MARCH 1993–REVISED FEBRUARY 2005
Absolute Maximum Ratings(1)
over operating free-air temperature range (unless otherwise noted)
MIN
–0.5
–0.5
–0.5
MAX
6.5
UNIT
V
VCC
VI
Supply voltage range
Input voltage range(2)
Voltage range applied to any output in the high-impedance or power-off state(2)(3)
6.5
V
VO
VO
IIK
6.5
V
Voltage range applied to any output in the high or low state
–0.5 VCC + 0.5
V
Input clamp current
VI < 0
–50
–50
±50
±100
63
mA
mA
mA
mA
IOK
IO
Output clamp current
VO < 0
Continuous output current
Continuous current through VCC or GND
DB package
DGV package
DW package
NS package
PW package
86
θJA
Package thermal impedance(4)
46
°C/W
°C
65
88
Tstg
Storage temperature range
–65
150
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) The input negative-voltage and output voltage ratings may be exceeded if the input and output current ratings are observed.
(3) The value of VCC is provided in the recommended operating conditions table.
(4) The package thermal impedance is calculated in accordance with JESD 51-7.
Recommended Operating Conditions(1)
MIN
MAX UNIT
Operating
1.65
3.6
V
VCC
Supply voltage
Data retention only
VCC = 1.65 V to 1.95 V
VCC = 2.3 V to 2.7 V
VCC = 2.7 V to 3.6 V
VCC = 1.65 V to 1.95 V
VCC = 2.3 V to 2.7 V
VCC = 2.7 V to 3.6 V
1.5
0.65 × VCC
VIH
High-level input voltage
1.7
2
V
0.35 × VCC
0.7
VIL
Low-level input voltage
V
0.8
5.5
VCC
5.5
–4
VI
Input voltage
0
0
0
V
V
High or low state
3-state
VO
Output voltage
VCC = 1.65 V
VCC = 2.3 V
VCC = 2.7 V
VCC = 3 V
–8
IOH
High-level output current
Low-level output current
mA
mA
–12
–24
4
VCC = 1.65 V
VCC = 2.3 V
VCC = 2.7 V
VCC = 3 V
8
IOL
12
24
∆t/∆v
Input transition rise or fall rate
Operating free-air temperature
10
ns/V
TA
–40
85
°C
(1) All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
3
SN74LVC861A
10-BIT BUS TRANSCEIVER
WITH 3-STATE OUTPUTS
www.ti.com
SCAS309I–MARCH 1993–REVISED FEBRUARY 2005
Electrical Characteristics
over recommended operating free-air temperature range (unless otherwise noted)
PARAMETER
TEST CONDITIONS
VCC
MIN TYP(1) MAX UNIT
IOH = –100 µA
IOH = –4 mA
IOH = –8 mA
1.65 V to 3.6 V VCC – 0.2
1.65 V
2.3 V
2.7 V
3 V
1.2
1.7
2.2
2.4
2.2
VOH
V
IOH = –12 mA
IOH = –24 mA
IOL = 100 µA
IOL = 4 mA
3 V
1.65 V to 3.6 V
1.65 V
2.3 V
2.7 V
3 V
0.2
0.45
0.7
VOL
IOL = 8 mA
V
IOL = 12 mA
IOL = 24 mA
0.4
0.55
±5
II
Control inputs VI = 0 to 5.5 V
VI or VO = 5.5 V
3.6 V
0
µA
µA
µA
Ioff
±10
±10
10
(2)
IOZ
VO = 0 to 5.5 V
3.6 V
VI = VCC or GND
3.6 V ≤ VI ≤ 5.5 V(3)
ICC
IO = 0
3.6 V
µA
10
∆ICC
Ci
One input at VCC – 0.6 V, Other inputs at VCC or GND
Control inputs VI = VCC or GND
A or B ports VO = VCC or GND
2.7 V to 3.6 V
3.3 V
500
µA
pF
pF
5
7
Cio
3.3 V
(1) All typical values are at VCC = 3.3 V, TA = 25°C.
(2) For I/O ports, the parameter IOZ includes the input leakage current.
(3) This applies in the disabled state only.
Switching Characteristics
over recommended operating free-air temperature range (unless otherwise noted) (see Figure 1)
VCC = 1.8 V
± 0.15 V
VCC = 2.5 V
± 0.2 V
VCC = 3.3 V
± 0.3 V
VCC = 2.7 V
FROM
(INPUT)
TO
(OUTPUT)
PARAMETER
UNIT
MIN
MAX
MIN
MAX
MIN
MAX
6.8
MIN
1.3
1
MAX
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
tpd
ten
A or B
B or A
A or B
A or B
6.4
7
ns
ns
ns
ns
(1)
(1)
(1)
(1)
OEAB or OEBA
OEAB or OEBA
8.2
6.6
tdis
1.7
5.9
1
tsk(o)
(1) This information was not available at the time of publication.
Operating Characteristics
TA = 25°C
VCC = 1.8 V VCC = 2.5 V VCC = 3.3 V
PARAMETER
TEST CONDITIONS
UNIT
TYP
TYP
TYP
29
5
(1)
(1)
Outputs enabled
Outputs disabled
Power dissipation capacitance
per transceiver
Cpd
f = 10 MHz
pF
(1)
(1)
(1) This information was not available at the time of publication.
4
SN74LVC861A
10-BIT BUS TRANSCEIVER
WITH 3-STATE OUTPUTS
www.ti.com
SCAS309I–MARCH 1993–REVISED FEBRUARY 2005
PARAMETER MEASUREMENT INFORMATION
V
LOAD
S1
Open
R
L
From Output
Under Test
TEST
/t
S1
GND
t
t
Open
PLH PHL
C
L
t
/t
V
R
L
PLZ PZL
LOAD
GND
(see Note A)
/t
PHZ PZH
LOAD CIRCUIT
INPUTS
V
CC
V
M
V
LOAD
C
L
R
L
V
∆
V
I
t /t
r f
1.8 V ± 0.15 V
2.5 V ± 0.2 V
2.7 V
V
V
2.7 V
2.7 V
≤2 ns
≤2 ns
≤2.5 ns
≤2.5 ns
V
/2
/2
2 × V
2 × V
6 V
6 V
30 pF
30 pF
50 pF
50 pF
1 kΩ
500 Ω
500 Ω
500 Ω
0.15 V
0.15 V
0.3 V
CC
CC
CC
V
CC
CC
CC
1.5 V
1.5 V
3.3 V ± 0.3 V
0.3 V
V
I
Timing Input
Data Input
V
M
0 V
t
w
t
t
h
su
V
I
V
I
Input
V
M
V
M
V
M
V
M
0 V
0 V
VOLTAGE WAVEFORMS
PULSE DURATION
VOLTAGE WAVEFORMS
SETUP AND HOLD TIMES
V
I
V
I
Output
Control
V
M
V
M
Input
V
M
V
M
0 V
0 V
t
t
t
t
t
PHL
PZL
PLZ
PLH
Output
Waveform 1
V
V
OH
V
V
/2
LOAD
V
V
V
M
M
Output
V
V
M
S1 at V
LOAD
V
OL
+ V
∆
OL
(see Note B)
OL
t
PHL
PLH
t
t
PHZ
PZH
Output
Waveform 2
S1 at GND
V
V
OH
V
OH
V
− V
∆
V
M
OH
M
Output
M
≈0 V
OL
(see Note B)
VOLTAGE WAVEFORMS
PROPAGATION DELAY TIMES
INVERTING AND NONINVERTING OUTPUTS
VOLTAGE WAVEFORMS
ENABLE AND DISABLE TIMES
LOW- AND HIGH-LEVEL ENABLING
NOTES: A. C includes probe and jig capacitance.
L
B. Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control.
C. All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, Z = 50 Ω.
O
D. The outputs are measured one at a time, with one transition per measurement.
E.
F.
G.
t
t
t
and t
and t
and t
are the same as t
.
dis
.
PLZ
PZL
PLH
PHZ
are the same as t
PZH
en
are the same as t .
PHL pd
H. All parameters and waveforms are not applicable to all devices.
Figure 1. Load Circuit and Voltage Waveforms
5
PACKAGE OPTION ADDENDUM
www.ti.com
20-Aug-2011
PACKAGING INFORMATION
Status (1)
Eco Plan (2)
MSL Peak Temp (3)
Samples
Orderable Device
Package Type Package
Drawing
Pins
Package Qty
Lead/
Ball Finish
(Requires Login)
SN74LVC861ADBLE
SN74LVC861ADBR
OBSOLETE
ACTIVE
SSOP
SSOP
DB
DB
24
24
TBD
Call TI
Call TI
2000
2000
2000
2000
2000
2000
25
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
CU NIPDAU Level-1-260C-UNLIM
CU NIPDAU Level-1-260C-UNLIM
CU NIPDAU Level-1-260C-UNLIM
CU NIPDAU Level-1-260C-UNLIM
CU NIPDAU Level-1-260C-UNLIM
CU NIPDAU Level-1-260C-UNLIM
CU NIPDAU Level-1-260C-UNLIM
CU NIPDAU Level-1-260C-UNLIM
CU NIPDAU Level-1-260C-UNLIM
CU NIPDAU Level-1-260C-UNLIM
CU NIPDAU Level-1-260C-UNLIM
SN74LVC861ADBRE4
SN74LVC861ADBRG4
SN74LVC861ADGVR
SN74LVC861ADGVRE4
SN74LVC861ADGVRG4
SN74LVC861ADW
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
SSOP
SSOP
TVSOP
TVSOP
TVSOP
SOIC
DB
DB
24
24
24
24
24
24
24
24
24
24
24
Green (RoHS
& no Sb/Br)
Green (RoHS
& no Sb/Br)
DGV
DGV
DGV
DW
DW
DW
PW
Green (RoHS
& no Sb/Br)
Green (RoHS
& no Sb/Br)
Green (RoHS
& no Sb/Br)
Green (RoHS
& no Sb/Br)
SN74LVC861ADWE4
SN74LVC861ADWG4
SN74LVC861APW
SOIC
25
Green (RoHS
& no Sb/Br)
SOIC
25
Green (RoHS
& no Sb/Br)
TSSOP
TSSOP
TSSOP
60
Green (RoHS
& no Sb/Br)
SN74LVC861APWE4
SN74LVC861APWG4
PW
60
Green (RoHS
& no Sb/Br)
PW
60
Green (RoHS
& no Sb/Br)
SN74LVC861APWLE
SN74LVC861APWR
OBSOLETE
ACTIVE
TSSOP
TSSOP
PW
PW
24
24
TBD
Call TI
Call TI
2000
2000
2000
250
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
CU NIPDAU Level-1-260C-UNLIM
CU NIPDAU Level-1-260C-UNLIM
CU NIPDAU Level-1-260C-UNLIM
SN74LVC861APWRE4
SN74LVC861APWRG4
SN74LVC861APWT
ACTIVE
ACTIVE
ACTIVE
TSSOP
TSSOP
TSSOP
PW
PW
PW
24
24
24
Green (RoHS
& no Sb/Br)
Green (RoHS
& no Sb/Br)
Green (RoHS
& no Sb/Br)
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
20-Aug-2011
Status (1)
ACTIVE
ACTIVE
Eco Plan (2)
MSL Peak Temp (3)
Samples
Orderable Device
Package Type Package
Drawing
Pins
Package Qty
Lead/
Ball Finish
(Requires Login)
SN74LVC861APWTE4
SN74LVC861APWTG4
TSSOP
TSSOP
PW
PW
24
24
250
250
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com
14-Jul-2012
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
B0
K0
P1
W
Pin1
Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant
(mm) W1 (mm)
SN74LVC861ADBR
SN74LVC861ADGVR
SN74LVC861APWR
SN74LVC861APWT
SSOP
TVSOP
TSSOP
TSSOP
DB
DGV
PW
24
24
24
24
2000
2000
2000
250
330.0
330.0
330.0
330.0
16.4
12.4
16.4
16.4
8.2
6.9
8.8
5.6
8.3
8.3
2.5
1.6
1.6
1.6
12.0
8.0
8.0
8.0
16.0
12.0
16.0
16.0
Q1
Q1
Q1
Q1
6.95
6.95
PW
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
14-Jul-2012
*All dimensions are nominal
Device
Package Type Package Drawing Pins
SPQ
Length (mm) Width (mm) Height (mm)
SN74LVC861ADBR
SN74LVC861ADGVR
SN74LVC861APWR
SN74LVC861APWT
SSOP
TVSOP
TSSOP
TSSOP
DB
DGV
PW
24
24
24
24
2000
2000
2000
250
367.0
367.0
367.0
367.0
367.0
367.0
367.0
367.0
38.0
35.0
38.0
38.0
PW
Pack Materials-Page 2
MECHANICAL DATA
MPDS006C – FEBRUARY 1996 – REVISED AUGUST 2000
DGV (R-PDSO-G**)
PLASTIC SMALL-OUTLINE
24 PINS SHOWN
0,23
0,13
M
0,07
0,40
24
13
0,16 NOM
4,50
4,30
6,60
6,20
Gage Plane
0,25
0°–ā8°
0,75
1
12
0,50
A
Seating Plane
0,08
0,15
0,05
1,20 MAX
PINS **
14
16
20
24
38
48
56
DIM
A MAX
A MIN
3,70
3,50
3,70
3,50
5,10
4,90
5,10
4,90
7,90
7,70
9,80
9,60
11,40
11,20
4073251/E 08/00
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion, not to exceed 0,15 per side.
D. Falls within JEDEC: 24/48 Pins – MO-153
14/16/20/56 Pins – MO-194
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MECHANICAL DATA
MSSO002E – JANUARY 1995 – REVISED DECEMBER 2001
DB (R-PDSO-G**)
PLASTIC SMALL-OUTLINE
28 PINS SHOWN
0,38
0,22
0,65
28
M
0,15
15
0,25
0,09
5,60
5,00
8,20
7,40
Gage Plane
1
14
0,25
A
0°–ā8°
0,95
0,55
Seating Plane
0,10
2,00 MAX
0,05 MIN
PINS **
14
16
20
24
28
30
38
DIM
6,50
5,90
6,50
5,90
7,50
8,50
7,90
10,50
9,90
10,50 12,90
A MAX
A MIN
6,90
9,90
12,30
4040065 /E 12/01
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion not to exceed 0,15.
D. Falls within JEDEC MO-150
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46C and to discontinue any product or service per JESD48B. Buyers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All
semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale supplied at the time
of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which
have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such
components to meet such requirements.
Products
Audio
Applications
www.ti.com/audio
amplifier.ti.com
dataconverter.ti.com
www.dlp.com
Automotive and Transportation www.ti.com/automotive
Communications and Telecom www.ti.com/communications
Amplifiers
Data Converters
DLP® Products
DSP
Computers and Peripherals
Consumer Electronics
Energy and Lighting
Industrial
www.ti.com/computers
www.ti.com/consumer-apps
www.ti.com/energy
dsp.ti.com
Clocks and Timers
Interface
www.ti.com/clocks
interface.ti.com
logic.ti.com
www.ti.com/industrial
www.ti.com/medical
www.ti.com/security
Medical
Logic
Security
Power Mgmt
Microcontrollers
RFID
power.ti.com
Space, Avionics and Defense www.ti.com/space-avionics-defense
microcontroller.ti.com
www.ti-rfid.com
Video and Imaging
www.ti.com/video
OMAP Mobile Processors www.ti.com/omap
Wireless Connectivity www.ti.com/wirelessconnectivity
TI E2E Community
e2e.ti.com
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2012, Texas Instruments Incorporated
相关型号:
SN74LVC861APWRG4
LVC/LCX/Z SERIES, 10-BIT TRANSCEIVER, TRUE OUTPUT, PDSO24, GREEN, PLASTIC, TSSOP-24
TI
SN74LVC861APWTG4
LVC/LCX/Z SERIES, 10-BIT TRANSCEIVER, TRUE OUTPUT, PDSO24, GREEN, PLASTIC, TSSOP-24
TI
©2020 ICPDF网 联系我们和版权申明