SN74S241 [TI]
OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS; 八路缓冲器并用3态输出线路驱动器型号: | SN74S241 |
厂家: | TEXAS INSTRUMENTS |
描述: | OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS |
文件: | 总16页 (文件大小:247K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SN54LS240, SN54LS241, SN54LS244, SN54S240, SN54S241, SN54S244
SN74LS240, SN74LS241, SN74LS244, SN74S240, SN74S241, SN74S244
OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS
SDLS144B – APRIL 1985 – REVISED FEBRUARY 2002
SN54LS’, SN54S’ . . . J OR W PACKAGE
3-State Outputs Drive Bus Lines or Buffer
Memory Address Registers
SN74LS240, SN74LS244 . . . DB, DW, N, OR NS PACKAGE
SN74LS241 . . . DW, N, OR NS PACKAGE
SN74S’ . . . DW OR N PACKAGE
PNP Inputs Reduce DC Loading
(TOP VIEW)
Hysteresis at Inputs Improves Noise
Margins
1G
1A1
2Y4
1A2
2Y3
1A3
2Y2
1A4
2Y1
GND
V
CC
2G/2G
1
2
3
4
5
6
7
8
9
10
20
19
18
17
16
15
14
†
description
1Y1
2A4
1Y2
2A3
These octal buffers and line drivers are designed
specifically to improve both the performance and
density of three-state memory address drivers,
clock drivers, and bus-oriented receivers and
transmitters. The designer has a choice of
selected combinations of inverting and
noninverting outputs, symmetrical, active-low
output-control (G) inputs, and complementary
output-control (G and G) inputs. These devices
featurehighfan-out, improvedfan-in, and400-mV
noise margin. The SN74LS’ and SN74S’ devices
can be used to drive terminated lines down to
133 Ω.
1Y3
13 2A2
12 1Y4
11
2A1
†
2G for ’LS241 and ’S241 or 2G for all other drivers.
SN54LS’, SN54S’ . . . FK PACKAGE
(TOP VIEW)
3
2
1
20 19
18
1Y1
2A4
1Y2
2A3
1Y3
1A2
2Y3
1A3
2Y2
1A4
4
5
6
7
8
17
16
15
14
9 10 11 12 13
†
2G for ’LS241 and ’S241 or 2G for all other drivers.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright 2002, Texas Instruments Incorporated
On products compliant to MIL-PRF-38535, all parameters are tested
unless otherwise noted. On all other products, production
processing does not necessarily include testing of all parameters.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN54LS240, SN54LS241, SN54LS244, SN54S240, SN54S241, SN54S244
SN74LS240, SN74LS241, SN74LS244, SN74S240, SN74S241, SN74S244
OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS
SDLS144B – APRIL 1985 – REVISED FEBRUARY 2002
ORDERING INFORMATION
ORDERABLE
PART NUMBER
TOP-SIDE
MARKING
†
PACKAGE
T
A
SN74LS240N
SN74LS240N
SN74LS241N
SN74LS244N
SN74S240N
SN74S241N
SN74S244N
SN74LS241N
SN74LS244N
SN74S240N
SN74S241N
SN74S244N
PDIP – N
Tube
Tube
SN74LS240DW
SN74LS240DWR
SN74LS241DW
SN74LS241DWR
SN74LS244DW
SN74LS244DWR
SN74S240DW
LS240
LS241
LS244
S240
Tape and reel
Tube
Tape and reel
Tube
0°C to 70°C
Tape and reel
Tube
SOIC – DW
Tape and reel
Tube
SN74S240DWR
SN74S241DW
S241
Tape and reel
Tube
SN74S241DWR
SN74S244DW
S244
Tape and reel
SN74S244DWR
SN74LS240NSR
SN74LS241NSR
SN74LS244NSR
SN74LS240DBR
SN74LS244DBR
74LS240
74LS241
74LS244
LS240
SOP – NS
Tube
SSOP – DB
Tape and reel
LS244
†
Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
2
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN54LS240, SN54LS241, SN54LS244, SN54S240, SN54S241, SN54S244
SN74LS240, SN74LS241, SN74LS244, SN74S240, SN74S241, SN74S244
OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS
SDLS144B – APRIL 1985 – REVISED FEBRUARY 2002
ORDERING INFORMATION (CONTINUED)
ORDERABLE
PART NUMBER
TOP-SIDE
MARKING
†
PACKAGE
T
A
SN54LS240J
SN54LS240J
SNJ54LS240J
SN54LS241J
SNJ54LS241J
SN54LS244J
SNJ54LS244J
SN54S240J
SNJ54LS240J
SN54LS241J
SNJ54LS241J
SN54LS244J
SNJ54LS244J
SN54S240J
CDIP – J
Tube
SNJ54S240J
SN54S241J
SNJ54S240J
SN54S241J
SNJ54S241J
SN54S244J
SNJ54S241J
SN54S244J
SNJ54S244J
SNJ54LS240W
SNJ54LS241W
SNJ54LS244W
SNJ54S240W
SNJ54S241W
SNJ54S244W
SNJ54LS240FK
SNJ54LS241FK
SNJ54LS244FK
SNJ54S240FK
SNJ54S241FK
SNJ54S244FK
SNJ54S244J
SNJ54LS240W
SNJ54LS241W
SNJ54LS244W
SNJ54S240W
SNJ54S241W
SNJ54S244W
SNJ54LS240FK
SNJ54LS241FK
SNJ54LS244FK
SNJ54S240FK
SNJ54S241FK
SNJ54S244FK
–55°C to 125°C
CFP – W
Tube
Tube
LCCC – FK
†
Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
3
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN54LS240, SN54LS241, SN54LS244, SN54S240, SN54S241, SN54S244
SN74LS240, SN74LS241, SN74LS244, SN74S240, SN74S241, SN74S244
OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS
SDLS144B – APRIL 1985 – REVISED FEBRUARY 2002
schematics of inputs and outputs
’S240, ’S241, ’S244
EQUIVALENT OF EACH INPUT
’LS240, ’LS241, ’LS244
EQUIVALENT OF EACH INPUT
V
CC
V
CC
Req
9 kΩ NOM
Input
Input
G and G inputs: R = 2 kΩ NOM
eq
A inputs: R = 2.8 kΩ NOM
eq
TYPICAL OF ALL OUTPUTS
V
CC
R
Output
GND
’LS240. ’LS241, ’LS244: R = 50 Ω NOM
’S240, ‘S241, S244: R = 25 Ω NOM
4
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN54LS240, SN54LS241, SN54LS244, SN54S240, SN54S241, SN54S244
SN74LS240, SN74LS241, SN74LS244, SN74S240, SN74S241, SN74S244
OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS
SDLS144B – APRIL 1985 – REVISED FEBRUARY 2002
logic diagram
’LS240, ’S240
’LS241, ’S241
1
1G
1
1G
18
16
14
12
2
4
1Y1
1Y2
1A1
1A2
1A3
18
16
14
12
2
4
6
8
1Y1
1Y2
1A1
1A2
1A3
6
1Y3
1Y4
1Y3
1Y4
8
1A4
2G
1A4
2G
19
19
9
7
5
3
9
11
13
15
17
11
13
15
17
2Y1
2A1
2A2
2A3
2A4
2Y1
2Y2
2A1
2A2
2A3
2A4
7
5
3
2Y2
2Y3
2Y4
2Y3
2Y4
’LS244, ’S244
1
1G
18
2
4
6
8
1Y1
1A1
1A2
1A3
16
14
12
1Y2
1Y3
1Y4
1A4
19
2G
9
7
5
3
11
13
15
17
2Y1
2A1
2A2
2A3
2A4
2Y2
2Y3
2Y4
Pin numbers shown are for DB, DW, J, N, NS, and W packages.
5
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN54LS240, SN54LS241, SN54LS244, SN54S240, SN54S241, SN54S244
SN74LS240, SN74LS241, SN74LS244, SN74S240, SN74S241, SN74S244
OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS
SDLS144B – APRIL 1985 – REVISED FEBRUARY 2002
†
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage, V
(see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V
CC
Input voltage, V : ’LS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V
I
’S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 V
Off-state output voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 V
Package thermal impedance, θ (see Note 2): DB package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70°C/W
JA
DW package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58°C/W
N package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69°C/W
NS package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60°C/W
Storage temperature range, T
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to 150°C
stg
†
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. Voltage values are with respect to network ground terminal.
2. The package thermal impedance is calculated in accordance with JESD 51-7.
recommended operating conditions
SN54LS’
MIN NOM
SN74LS’
UNIT
MAX
MIN NOM
MAX
V
V
V
Supply voltage (see Note 1)
High-level input voltage
Low-level input voltage
4.5
2
5
5.5
4.75
2
5
5.25
V
V
CC
IH
0.7
–12
12
0.8
–15
24
V
IL
I
High-level output current
Low-level output current
Operating free-air temperature
mA
mA
°C
OH
OL
I
T
A
–55
125
0
70
NOTE 1: Voltage values are with respect to network ground terminal.
6
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN54LS240, SN54LS241, SN54LS244, SN54S240, SN54S241, SN54S244
SN74LS240, SN74LS241, SN74LS244, SN74S240, SN74S241, SN74S244
OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS
SDLS144B – APRIL 1985 – REVISED FEBRUARY 2002
electrical characteristics over recommended operating free-air temperature range (unless
otherwise noted)
SN54LS’
SN74LS’
†
PARAMETER
UNIT
TEST CONDITIONS
‡
‡
MIN TYP
MAX
MIN TYP
MAX
V
V
V
V
= MIN,
= MIN
I = –18 mA
–1.5
–1.5
V
V
IK
Hysteresis
(V – V
CC
I
0.2
2.4
2
0.4
3.4
0.2
2.4
2
0.4
3.4
CC
)
T–
T+
= MIN,
= –3 mA
V
V
= 2 V,
= 2 V,
V
= MAX,
= 0.5 V,
CC
OH
IH
IL
I
V
V
V
OH
OL
V
= MIN,
= MAX
V
IL
CC
OH
IH
I
I
I
= 12 mA
= 24 mA
0.4
0.4
0.5
V
V
= MIN,
= MAX
V
IH
= 2 V,
OL
CC
IL
V
OL
V
V
= MAX,
= MAX
CC
IL
I
I
V
V
= 2 V,
= 2 V,
V
= 2.7 V
= 0.4 V
20
20
µA
µA
OZH
IH
O
O
V
V
= MAX,
= MAX
CC
IL
V
–20
–20
OZL
IH
I
I
I
I
V
V
V
V
= MAX,
= MAX,
= MAX,
= MAX,
V = 7 V
0.1
20
0.1
20
mA
µA
I
CC
CC
CC
CC
I
V = 2.7 V
I
IH
IL
V
IL
= 0.4 V
–0.2
–225
27
–0.2
–225
27
mA
mA
§
–40
–40
OS
Outputs high
Outputs low
All
17
26
27
29
32
17
26
27
29
32
’LS240
44
44
V
CC
= MAX,
I
’LS241, ’LS244
’LS240
46
46
mA
CC
Output open
50
50
Outputs disabled
’LS241, ’LS244
54
54
†
‡
§
For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions.
All typical values are at V = 5 V, T = 25°C.
Not more than one output should be shorted at a time, and duration of the short-circuit should not exceed one second.
CC
A
switching characteristics, V
= 5 V, T = 25°C (see Figure 1)
CC
A
’LS240
TYP
9
’LS241, ’LS244
PARAMETER
TEST CONDITIONS
MIN
UNIT
ns
MAX
14
MIN
TYP
12
MAX
t
t
t
t
t
t
18
18
30
23
20
25
PLH
PHL
PZL
PZH
PLZ
PHZ
R
R
R
= 667 Ω,
= 667 Ω,
= 667 Ω,
C
C
= 45 pF
= 45 pF
= 5 pF
L
L
L
L
L
12
18
12
20
30
20
ns
15
23
15
10
20
10
ns
C
L
15
25
15
7
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN54LS240, SN54LS241, SN54LS244, SN54S240, SN54S241, SN54S244
SN74LS240, SN74LS241, SN74LS244, SN74S240, SN74S241, SN74S244
OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS
SDLS144B – APRIL 1985 – REVISED FEBRUARY 2002
recommended operating conditions
SN54S’
SN74S’
UNIT
MIN NOM
MAX
MIN NOM
MAX
V
V
V
Supply voltage (see Note 1)
High-level input voltage
4.5
2
5
5.5
4.75
2
5
5.25
V
V
CC
IH
Low-level input voltage
0.8
–12
48
0.8
–15
64
V
IL
I
High-level output current
mA
mA
kΩ
°C
OH
OL
I
Low-level output current
External resistance between any input and V
or ground
40
40
CC
T
A
Operating free-air temperature (see Note 3)
–55
125
0
70
NOTES: 1. Voltage values are with respect to network ground terminal.
3. An SN54S241J operating at free-air temperature above 116°C requires a heat sink that provides a thermal resistance from case
to free air, R , of not more that 40°C/W.
CA
θ
electrical characteristics over recommended operating free-air temperature range (unless
otherwise noted)
SN54S’
SN74S’
†
PARAMETER
UNIT
TEST CONDITIONS
‡
‡
MIN TYP
MAX
MIN TYP
MAX
V
V
V
V
= MIN,
= MIN
I = –18 mA
–1.2
–1.2
V
V
IK
Hysteresis
(V – V
CC
I
0.2
0.4
3.4
0.2
2.7
2.4
2
0.4
3.4
CC
)
T–
T+
= MIN
= –1 mA
V
IH
V
IH
V
IH
V
IH
V
IH
V
IH
= 2 V,
= 2 V,
= 2 V,
= 2 V,
= 2 V,
= 2 V,
V
= 0.8 V,
= 0.8 V,
= 0.5 V,
= 0.8 V,
CC
OH
IL
IL
IL
IL
I
V
= MIN,
= –3 mA
V
V
V
CC
OH
2.4
2
V
OH
V
I
V
= MIN,
= MAX
CC
OH
I
V
= MIN,
= MAX
CC
V
OL
0.55
50
0.55
50
V
I
OL
V
V
= MAX,
= 0.8 V
CC
IL
I
I
V
V
= 2.4 V
= 0.5 V
µA
µA
OZH
O
V
V
= MAX,
= 0.8 V
CC
IL
–50
–50
OZL
O
I
I
V
= MAX,
= MAX,
V = 5.5 V
1
50
1
50
mA
µA
I
CC
CC
I
V
V = 2.7 V
I
IH
Any A
Any G
–400
–2
–400
–2
µA
I
V
= MAX,
= MAX
V = 0.5 V
I
IL
CC
CC
mA
mA
§
I
V
–50
–225
123
147
145
170
145
170
–50
–225
135
160
150
180
150
180
OS
’S240
80
95
80
95
Outputs high
Outputs low
’S241,’S244
’S240
100
120
100
120
100
120
100
120
V
CC
= MAX,
I
mA
CC
Output open
’S241, ’S244
’S240
Outputs disabled
’S241, ’S244
†
‡
§
For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions.
All typical values are at V = 5 V, T = 25°C.
Not more than one output should be shorted at a time, and duration of the short-circuit should not exceed one second.
CC
A
8
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN54LS240, SN54LS241, SN54LS244, SN54S240, SN54S241, SN54S244
SN74LS240, SN74LS241, SN74LS244, SN74S240, SN74S241, SN74S244
OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS
SDLS144B – APRIL 1985 – REVISED FEBRUARY 2002
switching characteristics, V
= 5 V, T = 25°C (see Figure 2)
CC
A
’S240
TYP
4.5
4.5
10
’S241, ’S244
PARAMETER
TEST CONDITIONS
MIN
UNIT
ns
MAX
7
MIN
TYP
6
MAX
9
t
t
t
t
t
t
PLH
PHL
PZL
PZH
PLZ
PHZ
R
R
R
= 90 Ω,
= 90 Ω,
= 90 Ω,
C
C
= 50 pF
= 50 pF
= 5 pF
L
L
L
L
L
7
6
9
15
10
15
9
10
8
15
12
15
9
ns
6.5
10
10
6
ns
C
L
6
9
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN54LS240, SN54LS241, SN54LS244, SN54S240, SN54S241, SN54S244
SN74LS240, SN74LS241, SN74LS244, SN74S240, SN74S241, SN74S244
OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS
SDLS144B – APRIL 1985 – REVISED FEBRUARY 2002
PARAMETER MEASUREMENT INFORMATION
SERIES 54LS/74LS DEVICES
V
CC
Test
Point
R
L
Test
Point
S1
V
CC
From Output
Under Test
V
CC
(see Note B)
R
L
C
L
(see Note A)
From Output
Under Test
5 kΩ
R
L
(see Note B)
From Output
Under Test
C
Test
Point
C
L
(see Note A)
L
(see Note A)
S2
LOAD CIRCUIT
LOAD CIRCUIT
LOAD CIRCUIT
FOR 2-STATE TOTEM-POLE OUTPUTS
FOR OPEN-COLLECTOR OUTPUTS
FOR 3-STATE OUTPUTS
3 V
High-Level
Timing
Input
1.3 V
1.3 V
1.3 V
1.3 V
Pulse
0 V
t
t
h
w
t
su
3 V
0 V
Low-Level
Pulse
Data
Input
1.3 V
1.3 V
1.3 V
VOLTAGE WAVEFORMS
PULSE DURATIONS
VOLTAGE WAVEFORMS
SETUP AND HOLD TIMES
Output
3 V
0 V
Control
(low-level
enabling)
1.3 V
1.3 V
3 V
0 V
Input
1.3 V
1.3 V
t
t
PLZ
PZL
t
t
PHL
PLH
Waveform 1
(see Notes C
and D)
≈1.5 V
In-Phase
Output
(see Note D)
1.3 V
V
V
OH
V
OL
+ 0.3 V
1.3 V
1.3 V
1.3 V
V
OL
t
PHZ
OL
t
PZH
t
t
PLH
PHL
V
OH
Waveform 2
(see Notes C
and D)
V
OH
– 0.3 V
Out-of-Phase
Output
(see Note D)
V
V
OH
1.3 V
1.3 V
≈1.5 V
OL
VOLTAGE WAVEFORMS
PROPAGATION DELAY TIMES
VOLTAGE WAVEFORMS
ENABLE AND DISABLE TIMES, 3-STATE OUTPUTS
NOTES: A.
C
includes probe and jig capacitance.
L
B. All diodes are 1N3064 or equivalent.
C. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control.
D. S1 and S2 are closed for t
, t
, t
, and t
; S1 is open and S2 is closed for t
PLZ PZH
; S1 is closed and S2 is open for t .
PLH PHL PHZ
PZL
E. Phase relationships between inputs and outputs have been chosen arbitrarily for these examples.
F. All input pulses are supplied by generators having the following characteristics: PRR ≤ 1 MHz, Z ≈ 50 Ω, t ≤ 15 ns, t ≤ 6 ns.
O
r
f
G. The outputs are measured one at a time with one input transition per measurement.
Figure 1. Load Circuits and Voltage Waveforms
10
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN54LS240, SN54LS241, SN54LS244, SN54S240, SN54S241, SN54S244
SN74LS240, SN74LS241, SN74LS244, SN74S240, SN74S241, SN74S244
OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS
SDLS144B – APRIL 1985 – REVISED FEBRUARY 2002
PARAMETER MEASUREMENT INFORMATION
SERIES 54S/74S DEVICES
V
CC
Test
Point
R
L
Test
Point
S1
V
CC
From Output
Under Test
V
CC
(see Note B)
R
L
C
L
(see Note A)
From Output
Under Test
1 kΩ
R
L
(see Note B)
From Output
Under Test
C
Test
Point
C
L
(see Note A)
L
(see Note A)
S2
LOAD CIRCUIT
LOAD CIRCUIT
LOAD CIRCUIT
FOR 2-STATE TOTEM-POLE OUTPUTS
FOR OPEN-COLLECTOR OUTPUTS
FOR 3-STATE OUTPUTS
3 V
High-Level
Timing
Input
1.5 V
1.5 V
1.5 V
1.5 V
Pulse
0 V
t
t
h
w
t
su
3 V
0 V
Low-Level
Pulse
Data
Input
1.5 V
1.5 V
1.5 V
VOLTAGE WAVEFORMS
PULSE DURATIONS
VOLTAGE WAVEFORMS
SETUP AND HOLD TIMES
3 V
0 V
Output
Control
(low-level
enabling)
1.5 V
1.5 V
3 V
0 V
Input
1.5 V
1.5 V
t
t
PLZ
PZL
t
t
PHL
PLH
Waveform 1
(see Notes C
and D)
≈1.5 V
In-Phase
1.5 V
V
OH
Output
(see Note D)
V
OL
+ 0.5 V
1.5 V
1.5 V
1.5 V
V
OL
V
OL
t
t
PZH
PHZ
t
t
PLH
PHL
V
OH
Waveform 2
(see Notes C
and D)
V
OH
– 0.5 V
Out-of-Phase
Output
V
V
OH
1.5 V
1.5 V
≈1.5 V
(see Note D)
OL
VOLTAGE WAVEFORMS
PROPAGATION DELAY TIMES
VOLTAGE WAVEFORMS
ENABLE AND DISABLE TIMES, 3-STATE OUTPUTS
NOTES: A.
C
includes probe and jig capacitance.
L
B. All diodes are 1N3064 or equivalent.
C. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control.
D. S1 and S2 are closed for t
, t
, t
, and t
; S1 is open and S2 is closed for t
PLZ PZH
; S1 is closed and S2 is open for t .
PZL
PLH PHL PHZ
E. All input pulses are supplied by generators having the following characteristics: PRR ≤ 1 MHz, Z ≈ 50 Ω; t and t ≤ 7 ns for Series
O
r
f
54/74 devices and t and t ≤ 2.5 ns for Series 54S/74S devices.
r
f
F. The outputs are measured one at a time with one input transition per measurement.
Figure 2. Load Circuits and Voltage Waveforms
11
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN54LS240, SN54LS241, SN54LS244, SN54S240, SN54S241, SN54S244
SN74LS240, SN74LS241, SN74LS244, SN74S240, SN74S241, SN74S244
OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS
SDLS144B – APRIL 1985 – REVISED FEBRUARY 2002
APPLICATION INFORMATION
12
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
PACKAGE OPTION ADDENDUM
www.ti.com
28-Feb-2005
PACKAGING INFORMATION
Orderable Device
Status (1)
Package Package
Pins Package Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
Qty
Type
CDIP
CFP
Drawing
5962-7801201VRA
5962-7801201VSA
7705701RA
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
J
W
J
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
25
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Level-NC-NC-NC
Level-NC-NC-NC
Level-NC-NC-NC
Level-NC-NC-NC
Level-NC-NC-NC
Level-NC-NC-NC
Level-NC-NC-NC
Level-NC-NC-NC
Level-NC-NC-NC
Level-NC-NC-NC
Level-NC-NC-NC
Level-NC-NC-NC
Level-NC-NC-NC
Level-NC-NC-NC
Level-NC-NC-NC
Level-NC-NC-NC
Level-NC-NC-NC
Level-NC-NC-NC
Level-NC-NC-NC
Level-NC-NC-NC
Level-NC-NC-NC
Level-NC-NC-NC
Level-NC-NC-NC
Level-NC-NC-NC
CDIP
CFP
7705701SA
W
FK
J
78012012A
LCCC
CDIP
CFP
7801201RA
7801201SA
W
FK
J
JM38510/32401B2A
JM38510/32401BRA
JM38510/32401BSA
JM38510/32402B2A
JM38510/32402BRA
JM38510/32402BSA
JM38510/32403B2A
JM38510/32403BRA
JM38510/32403BSA
JM38510/32403SRA
JM38510/32403SSA
SN54LS240J
LCCC
CDIP
CFP
W
FK
J
LCCC
CDIP
CFP
W
FK
J
LCCC
CDIP
CFP
W
J
CDIP
CFP
W
J
CDIP
CDIP
CDIP
CDIP
CDIP
CDIP
SOIC
SN54LS241J
J
SN54LS244J
J
SN54S240J
J
SN54S241J
J
SN54S244J
J
SN74LS240DW
DW
Pb-Free
(RoHS)
CU NIPDAU Level-2-250C-1 YEAR/
Level-1-235C-UNLIM
SN74LS240DWR
ACTIVE
SOIC
DW
20
2000
20
Pb-Free
(RoHS)
CU NIPDAU Level-2-250C-1 YEAR/
Level-1-235C-UNLIM
SN74LS240J
SN74LS240N
OBSOLETE
ACTIVE
CDIP
PDIP
J
20
20
None
Call TI
Call TI
N
Pb-Free
(RoHS)
CU NIPDAU Level-NC-NC-NC
SN74LS240N3
OBSOLETE
ACTIVE
PDIP
SO
N
20
20
None
Call TI
Call TI
SN74LS240NSR
NS
2000
25
Pb-Free
(RoHS)
CU NIPDAU Level-2-260C-1 YEAR/
Level-1-235C-UNLIM
SN74LS241DW
ACTIVE
ACTIVE
SOIC
SOIC
DW
DW
20
20
Pb-Free
(RoHS)
CU NIPDAU Level-2-250C-1 YEAR/
Level-1-235C-UNLIM
SN74LS241DWR
2000
Pb-Free
(RoHS)
CU NIPDAU Level-2-250C-1 YEAR/
Level-1-235C-UNLIM
SN74LS241J
SN74LS241N
OBSOLETE
ACTIVE
CDIP
PDIP
J
20
20
None
Call TI
Call TI
N
20
Pb-Free
(RoHS)
CU NIPDAU Level-NC-NC-NC
SN74LS241N3
OBSOLETE
ACTIVE
PDIP
SO
N
20
20
None
Call TI
Call TI
SN74LS241NSR
NS
2000
Pb-Free
(RoHS)
CU NIPDAU Level-2-260C-1 YEAR/
Level-1-235C-UNLIM
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
28-Feb-2005
Orderable Device
SN74LS244DBR
SN74LS244DW
SN74LS244DWR
Status (1)
ACTIVE
ACTIVE
ACTIVE
Package Package
Pins Package Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
Qty
Type
Drawing
SSOP
DB
20
20
20
2000
Pb-Free
(RoHS)
CU NIPDAU Level-2-260C-1 YEAR/
Level-1-235C-UNLIM
SOIC
SOIC
DW
DW
25
Pb-Free
(RoHS)
CU NIPDAU Level-2-250C-1 YEAR/
Level-1-235C-UNLIM
2000
Pb-Free
(RoHS)
CU NIPDAU Level-2-250C-1 YEAR/
Level-1-235C-UNLIM
SN74LS244J
SN74LS244N
OBSOLETE
ACTIVE
CDIP
PDIP
J
20
20
None
Call TI
Call TI
N
20
Pb-Free
(RoHS)
CU NIPDAU Level-NC-NC-NC
SN74LS244N3
OBSOLETE
ACTIVE
PDIP
SO
N
20
20
None
Call TI
Call TI
SN74LS244NSR
NS
2000
25
Pb-Free
(RoHS)
CU NIPDAU Level-2-260C-1 YEAR/
Level-1-235C-UNLIM
SN74S240DW
SN74S240DWR
SN74S240N
ACTIVE
ACTIVE
ACTIVE
SOIC
SOIC
PDIP
DW
DW
N
20
20
20
Pb-Free
(RoHS)
CU NIPDAU Level-2-250C-1 YEAR/
Level-1-235C-UNLIM
2000
20
Pb-Free
(RoHS)
CU NIPDAU Level-2-250C-1 YEAR/
Level-1-235C-UNLIM
Pb-Free
(RoHS)
CU NIPDAU Level-NC-NC-NC
SN74S240N3
SN74S241DW
OBSOLETE
ACTIVE
PDIP
SOIC
N
20
20
None
Call TI
Call TI
DW
25
Pb-Free
(RoHS)
CU NIPDAU Level-2-250C-1 YEAR/
Level-1-235C-UNLIM
SN74S241DWR
ACTIVE
SOIC
DW
20
2000
Pb-Free
(RoHS)
CU NIPDAU Level-2-250C-1 YEAR/
Level-1-235C-UNLIM
SN74S241J
SN74S241N
OBSOLETE
ACTIVE
CDIP
PDIP
J
20
20
None
Call TI
Call TI
N
20
Pb-Free
(RoHS)
CU NIPDAU Level-NC-NC-NC
SN74S241N3
SN74S244DW
OBSOLETE
ACTIVE
PDIP
SOIC
N
20
20
None
Call TI
Call TI
DW
25
Pb-Free
(RoHS)
CU NIPDAU Level-2-250C-1 YEAR/
Level-1-235C-UNLIM
SN74S244DWR
ACTIVE
SOIC
DW
20
2000
Pb-Free
(RoHS)
CU NIPDAU Level-2-250C-1 YEAR/
Level-1-235C-UNLIM
SN74S244J
SN74S244N
OBSOLETE
ACTIVE
CDIP
PDIP
J
20
20
None
Call TI
Call TI
N
20
Pb-Free
(RoHS)
CU NIPDAU Level-NC-NC-NC
SN74S244N3
SNJ54LS240FK
SNJ54LS240J
SNJ54LS240W
SNJ54LS241FK
SNJ54LS241J
SNJ54LS241W
SNJ54LS244FK
SNJ54LS244J
SNJ54LS244W
SNJ54S240FK
SNJ54S240J
OBSOLETE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
PDIP
LCCC
CDIP
CFP
N
FK
J
20
20
20
20
20
20
20
20
20
20
20
20
20
20
None
None
None
None
None
None
None
None
None
None
None
None
None
None
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
1
1
1
1
1
1
1
1
1
1
1
1
1
Level-NC-NC-NC
Level-NC-NC-NC
Level-NC-NC-NC
Level-NC-NC-NC
Level-NC-NC-NC
Level-NC-NC-NC
Level-NC-NC-NC
Level-NC-NC-NC
Level-NC-NC-NC
Level-NC-NC-NC
Level-NC-NC-NC
Level-NC-NC-NC
Level-NC-NC-NC
W
FK
J
LCCC
CDIP
CFP
W
FK
J
LCCC
CDIP
CFP
W
FK
J
LCCC
CDIP
CFP
SNJ54S240W
SNJ54S241FK
W
FK
LCCC
Addendum-Page 2
PACKAGE OPTION ADDENDUM
www.ti.com
28-Feb-2005
Orderable Device
Status (1)
Package Package
Pins Package Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
Qty
Type
CDIP
CFP
Drawing
SNJ54S241J
SNJ54S241W
SNJ54S244FK
SNJ54S244J
SNJ54S244W
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
J
W
FK
J
20
20
20
20
20
1
1
1
1
1
None
None
None
None
None
Call TI
Call TI
Call TI
Call TI
Call TI
Level-NC-NC-NC
Level-NC-NC-NC
Level-NC-NC-NC
Level-NC-NC-NC
Level-NC-NC-NC
LCCC
CDIP
CFP
W
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - May not be currently available - please check http://www.ti.com/productcontent for the latest availability information and additional
product content details.
None: Not yet available Lead (Pb-Free).
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Green (RoHS & no Sb/Br): TI defines "Green" to mean "Pb-Free" and in addition, uses package materials that do not contain halogens,
including bromine (Br) or antimony (Sb) above 0.1% of total product weight.
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDECindustry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 3
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,
enhancements, improvements, and other changes to its products and services at any time and to discontinue
any product or service without notice. Customers should obtain the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to TI’s terms
and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI
deems necessary to support this warranty. Except where mandated by government requirements, testing of all
parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for
their products and applications using TI components. To minimize the risks associated with customer products
and applications, customers should provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,
copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process
in which TI products or services are used. Information published by TI regarding third-party products or services
does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.
Use of such information may require a license from a third party under the patents or other intellectual property
of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction
of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for
such altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that
product or service voids all express and any implied warranties for the associated TI product or service and
is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Following are URLs where you can obtain information on other Texas Instruments products and application
solutions:
Products
Applications
Audio
Amplifiers
amplifier.ti.com
www.ti.com/audio
Data Converters
dataconverter.ti.com
Automotive
www.ti.com/automotive
DSP
dsp.ti.com
Broadband
Digital Control
Military
www.ti.com/broadband
www.ti.com/digitalcontrol
www.ti.com/military
Interface
Logic
interface.ti.com
logic.ti.com
Power Mgmt
Microcontrollers
power.ti.com
Optical Networking
Security
www.ti.com/opticalnetwork
www.ti.com/security
www.ti.com/telephony
www.ti.com/video
microcontroller.ti.com
Telephony
Video & Imaging
Wireless
www.ti.com/wireless
Mailing Address:
Texas Instruments
Post Office Box 655303 Dallas, Texas 75265
Copyright 2005, Texas Instruments Incorporated
相关型号:
SN74S241DWE4
Bus Driver, S Series, 2-Func, 4-Bit, True Output, TTL, PDSO20, GREEN, PLASTIC, SOIC-20
ROCHESTER
SN74S241DWRG4
Bus Driver, S Series, 2-Func, 4-Bit, True Output, TTL, PDSO20, GREEN, PLASTIC, SOIC-20
ROCHESTER
©2020 ICPDF网 联系我们和版权申明