SN75119 [TI]
DIFFERENTIAL LINE TRANSCEIVERS; 差分线路收发器型号: | SN75119 |
厂家: | TEXAS INSTRUMENTS |
描述: | DIFFERENTIAL LINE TRANSCEIVERS |
文件: | 总15页 (文件大小:240K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SN55116, SN75116, SN75117, SN75118, SN75119
DIFFERENTIAL LINE TRANSCEIVERS
SLLS073D – MAY 1976 – REVISED MAY 1998
features common to all types
additional features of the SN55116/SN75116
Single 5-V Supply
Choice of Ceramic or Plastic Packages
Independent Driver and Receiver
3-State Driver Output Circuitry
TTL-Compatible Driver Inputs
TTL-Compatible Receiver Output
Differential Line Operation
Choice of Open-Collector or Totem-Pole
Outputs on Both Driver and Receiver
Dual Data Inputs on Driver
Optional Line-Termination Resistor in
Receiver
Receiver Output Strobe (SN55116,
SN75116, SN75117) or Enable (SN75118,
SN75119)
±15-V Receiver Common-Mode Capability
Designed for Party-Line (Data-Bus)
Applications
Receiver Frequency-Response Control
additional features of the SN75117
Driver Output Internally Connected to
Receiver Input
The SN75118 is an SN75116 With 3-State Receiver Output Circuitry
The SN75119 is an SN75117 With 3-State Receiver Output Circuitry
description
These integrated circuits are designed for use in interfacing between TTL-type digital systems and differential
data-transmission lines. They are especially useful for party-line (data-bus) applications. Each of these circuit
types combine in one package a 3-state differential line driver and a differential-input line receiver, both of which
operate from a single 5-V power supply. The driver inputs and the receiver outputs are TTL compatible. The
driver employed is similar to the SN55113 and SN75113 3-state line drivers, and the receiver is similar to the
SN55115 and SN75115 line receivers.
The SN55116, SN75116, and SN75118 offer all the features of the SN55113 and SN75113 drivers and the
SN55115 and SN75115 receivers combined. The driver performs the dual input AND and NAND functions when
enabledorpresentsahighimpedancetotheloadwheninthedisabledstate. Thedriveroutputstagesaresimilar
to TTL totem-pole outputs, but have the current-sinking portion separated from the current-sourcing portion and
both are brought out to adjacent package terminals. This feature allows the user the option of using the driver
in the open-collector output configuration, or, by connecting the adjacent source and sink terminals together,
of using the driver in the normal totem-pole output configuration.
The receiver portion of the SN55116, SN75116, and SN75118 features a differential-input circuit having a
common-mode voltage range of ±15 V. An internal 130-Ω equivalent resistor also is provided, which optionally
can be used to terminate the transmission line. A frequency-response control terminal allows the user to reduce
the speed of the receiver or to improve differential noise immunity. The receivers of the SN55116 and SN75116
have an output strobe and a split totem-pole output. The receiver of the SN75118 has an output-enable for the
3-state split totem-pole output. The receiver section of either circuit is independent of the driver section except
for the V
and ground terminals.
CC
The SN75117 and SN75119 provide the basic driver and receiver functions of the SN55116, SN75116, and
SN75118, but use a package that is only half as large. The SN75117 and SN75119 are intended primarily for
party-line or bus-organized systems because the driver outputs are internally connected to the receiver inputs.
The driver has a single data input and a single enable input. The SN75117 receiver has an output strobe, while
the SN75119 receiver has a 3-state output enable. However, these devices do not provide output connection
options, line-termination resistors, or receiver frequency-response controls.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright 1998, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN55116, SN75116, SN75117, SN75118, SN75119
DIFFERENTIAL LINE TRANSCEIVERS
SLLS073D – MAY 1976 – REVISED MAY 1998
description (continued)
The SN55116 is characterized for operation over the full military temperature range of –55°C to 125°C. The
SN75116, SN75117, SN75118, and SN75119 are characterized for operation from 0°C to 70°C.
SN55116 . . . J PACKAGE
SN75116 . . . D OR N PACKAGE
(TOP VIEW)
SN75118 . . . D OR N PACKAGE
(TOP VIEW)
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
9
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
9
DZP
DZS
DYS
DYP
RA
V
CC
DB
DA
DE
RYP
RYS
RE
V
DB
DA
DE
RYP
RYS
RS
DZP
DZS
DYS
DYP
RA
CC
R
R
T
T
RB
GND
RB
GND
RTC
RTC
SN55116 . . . FK PACKAGE
(TOP VIEW)
SN75117 . . . D OR P PACKAGE
(TOP VIEW)
DI
B
A
V
CC
1
2
3
4
8
7
6
5
DE
RY
RS
3
2
1
20 19
18
DA
DYS
DYP
NC
4
5
6
7
8
GND
DE
17
16
15
14
NC
SN75119 . . . D OR P PACKAGE
(TOP VIEW)
RYP
RYS
RA
R
T
9 10 11 12 13
DI
B
A
V
CC
1
2
3
4
8
7
6
5
DE
RY
RE
GND
NC – No internal connection
Function Tables
’116, SN75118
DRIVER
SN75117, SN75119
DRIVER
INPUTS
INPUTS
DI DE
OUTPUTS
OUTPUTS
DE
DA
DB
DY
DZ
A
B
L
H
H
H
X
L
X
H
X
X
L
Z
L
L
Z
H
H
L
H
L
X
H
H
L
H
L
Z
L
H
Z
H
H
SN75117, SN75119
RECEIVER
’116, SN75118
RECEIVER
INPUTS
OUTPUT RY
OUTPUTS RY
DIFF
INPUT
RS/RE
A
B
RS/RE SN75117 SN75119
’116
SN75118
H
L
X
L
H
X
H
H
L
H
L
H
H
L
Z
L
H
H
X
L
H
H
H
L
Z
H
L
H = high level (V ≥ V min or V more positive than V
IH ID
max), L = low level (V ≤ V max or V more negative than V max),
IL ID TL
I
TH
I
X = irrelevant, Z = high impedance (off)
2
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN55116, SN75116, SN75117, SN75118, SN75119
DIFFERENTIAL LINE TRANSCEIVERS
SLLS073D – MAY 1976 – REVISED MAY 1998
†
logic diagram (positive logic)
logic symbol
‡
’116
‡
’116 and SN75118
&
4
3
1
2
DYP
DYS
DZP
DZS
13
13
DE
DE
EN
14
4
3
DA
DYP (pullup)
DYS (sink)
15
DB
14
15
DA
DB
7
&
RB
5
1
2
RA
12
11
DZP (pullup)
DZS (sink)
RYP
RYS
6
R
T
R
T
RS
10
9
RTC
RESP
‡
’116 Receiver
7
‡
SN75118
RB
RA
12
5
RYP (pullup)
&
4
3
1
2
11
DYP
DYS
DZP
DZS
6
RYS (sink)
13
R
T
DE
EN
9
14
DA
RTC
RS
15
10
DB
7
RB
5
‡
SN75118 Receiver
RA
6
12
11
RYP
RYS
10
R
T
R
T
RE
10
7
5
6
9
12
11
RE
9
EN
RYP (pullup)
RYS (sink)
RB
RA
RTC
RESP
R
T
‡
SN75117
RTC
7
DE
1
3
EN
A
2
‡
SN75117 Driver and Receiver
DI
B
5
7
1
5
RS
RS
DE
DI
&
6
6
RY
RY
3
A
2
‡
SN75119
BUS
B
7
DE
1
3
2
EN
EN
A
B
DI
‡
SN75119 Driver and Receiver
5
7
1
5
RE
RE
DE
DI
6
RY
6
RY
3
A
2
BUS
B
†
‡
These symbols are in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12.
Pin numbers shown for the SN55116 and SN75116 are for the D, J, and N packages, those shown for the SN75118 are for the D and Npackages,
and those shown for SN75117 and SN75119 are for the D and P packages.
3
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN55116, SN75116, SN75117, SN75118, SN75119
DIFFERENTIAL LINE TRANSCEIVERS
SLLS073D – MAY 1976 – REVISED MAY 1998
schematics of inputs and outputs
EQUIVALENT OF
EACH DRIVER INPUT
AND EACH RE AND RS INPUT
EQUIVALENT OF
EACH RECEIVER INPUT
(EXCLUDING ENABLES AND STROBES)
TYPICAL OF ALL OUTPUTS
V
CC
V
CC
V
CC
1 pF NOM
4 kΩ
NOM
Input
7 kΩ
NOM
8 kΩ
NOM
Input
R
Pullup
output
†
Sink
output
†
130 Ω
NOM
Driver output R = 9 Ω NOM
Receiver output R = 20 Ω NOM
†
On SN75117 and SN75119, common outputs
replace the separate pullup and sink outputs.
‡
absolute maximum ratings over operating free-air temperature (unless otherwise noted)
Supply voltage, V
(see Notes 1 and 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V
CC
Input voltage, V : DA, DB, DE, DI, RE, and RS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 V
I
RA, RB, R for ’116, SN75118 only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±25 V
T
A and B for SN75117, SN75119 only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 to 6 V
Off-state voltage applied to open-collector outputs: ’116, SN75118 only . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 V
Continuous total power dissipation (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table
Storage temperature range, T
Case temperature for 60 seconds, T : FK package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to 150°C
stg
C
Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds: J package . . . . . . . . . . . . . . . . . . . . . 300°C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: D, N, or P package . . . . . . . . . . . . . 260°C
‡
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltage values are with respect to the network ground terminal.
2. In the FK and J packages, the SN55116 chip is alloy mounted. The SN75116, SN75117, SN75118, and SN75119 chips are glass
mounted.
4
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN55116, SN75116, SN75117, SN75118, SN75119
DIFFERENTIAL LINE TRANSCEIVERS
SLLS073D – MAY 1976 – REVISED MAY 1998
DISSIPATION RATING TABLE
DERATING FACTOR
T
≤ 25°C
T
A
= 70°C
T = 125°C
A
POWER RATING
A
PACKAGE
POWER RATING
ABOVE T = 25°C
POWER RATING
A
D (8 pin)
725 mW
5.8 mW/°C
7.6 mW/°C
11.0 mW/°C
11.0 mW/°C
9.2 mW/°C
8.0 mW/°C
464 mW
—
—
D (16 pin)
950 mW
608 mW
FK
J
1375 mW
1375 mW
1150 mW
1000 mW
880 mW
275 mW
275 mW
—
880 mW
N
P
736 mW
640 mW
—
recommended operating conditions
SN75116, SN75117,
SN75118, SN75119
SN55116
PARAMETER
UNIT
MIN NOM
MAX
MIN NOM
MAX
Supply voltage, V
4.5
2
5
5.5
4.5
2
5
5.5
V
V
V
CC
High-level input voltage, V
IH
All inputs except differential
inputs
Low-level input voltage, V
0.8
–40
–5
40
0.8
–40
–5
40
IL
Drivers
High-level output current, I
mA
mA
V
OH
Receivers
Drivers
Low-level output current, I
OL
Receivers
15
15
’116, SN75118
SN75117, SN75119
’116, SN75118
SN75117, SN75119
±15
6
±15
6
Receiver input voltage, V
I
0
0
±15
6
±15
6
Common-mode receiver input voltage, V
V
ICR
0
0
0
Operating free-air temperature, T
–55
125
70
°C
A
5
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
electrical characteristics over recommended operating free-air temperature range (unless otherwise noted)
driver section
’116, SN75118
SN75117, SN75119
†
PARAMETER
Input clamp voltage
UNIT
TEST CONDITIONS
I = –12 mA
‡
‡
TYP
MIN
MAX
MIN TYP
MAX
V
IK
V
= MIN,
= MIN,
= 0.8 V,
= 2 V
–0.9
3.4
–1.5
–0.9
3.4
–1.5
V
CC
I
T
T
A
= 25°C (SN55116),
= 0°C to 70°C
A
I
I
= –10 mA
= –40 mA
2.4
2
2.4
2
OH
V
V
CC
IL
(SN75116, SN75117,
SN75118, SN75119)
3
1
3
V
OH
High-level output voltage
OH
V
I
IH
I
I
I
= –10 mA
= –40 mA
= 40 mA
2
2
T
= –55°C to 125°C
OH
OH
OL
A
(SN55116)
1.8
1.8
V
OL
V
OK
Low-level output voltage
Output clamp voltage
V
CC
V
CC
= MIN,
V
IH
= 2 V,
V = 0.8 V,
IL
DE at 0.8 V
0.4
–1.5
10
0.4
V
V
= MAX,
I
O
= –40 mA,
–1.5
T
A
= 25°C
V
V
= MAX,
= 12 V
SN55116
200
CC
O
I
Off-state open-collector output current
µA
O(off)
T
A
= MAX
SN75116,
SN75118
20
V
V
= MAX,
= MAX,
V
V
V
= 0 to V
= 0
DE at 0.8 V,
T = 25°C
A
SN55116
±10
–300
±150
CC
O
O
O
CC,
Off-state (high-impedance-state)
output current
CC
I
I
µA
OZ
= 0.4 V to V
CC
SN55116
DE at 0.8 V,
= MAX
SN75116,
SN75118
T
A
V
O
= 0 to V
±20
CC
Input current at maximum
V
CC
= MAX, V = 5.5 V
1
1
mA
I
I
input voltage
Driver or
enable input
I
IH
I
IL
High-level input current
Low-level input current
V
CC
V
CC
= MAX, V = 2.4 V
40
40
µA
I
= MAX, V = 0.4 V
–1.6
–1.6
mA
I
§
I
V
= MAX,
= MAX,
V
= 0,
T = 25°C
A
–40
–120
60
–40
42
–120
60
mA
mA
Short-circuit output current
OS
CC
CC
CC
O
Supply current (driver and receiver
combined)
I
V
T
A
= 25°C
42
†
All parameters with the exception of off-state open-collector output current are measured with the active pullup connected to the sink output. For conditions shown as MIN or MAX,
use the appropriate value specified under recommended operating conditions.
‡
§
All typical values are at V
= 5 V and T = 25°C.
CC
Not more than one output should be shorted at a time, and duration of the short circuit should not exceed one second.
A
SN55116, SN75116, SN75117, SN75118, SN75119
DIFFERENTIAL LINE TRANSCEIVERS
SLLS073D – MAY 1976 – REVISED MAY 1998
switching characteristics, V
driver section
= 5 V, C = 30 pF, T = 25°C
L A
CC
PARAMETER
TEST CONDITIONS
See Figure 13
MIN
TYP
14
12
8
MAX
30
UNIT
t
t
t
t
t
t
Propagation-delay time, low-to-high level output
Propagation-delay time, high-to-low level output
Output-enable time to high level
PLH
PHL
PZH
PZL
PHZ
PLZ
ns
30
R
R
R
R
= 180 Ω, See Figure 14
= 250 Ω, See Figure 15
= 180 Ω, See Figure 14
= 250 Ω, See Figure 15
20
ns
ns
ns
ns
L
L
L
L
Output-enable time to low level
17
16
20
40
Output-disable time from high level
Output-disable time from low level
30
35
7
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
electrical characteristics over recommended operating free-air temperature range (unless otherwise noted)
receiver section
’116, SN75118
SN75117, SN75119
†
PARAMETER
UNIT
TEST CONDITIONS
‡
‡
MIN TYP
MAX
MIN TYP
MAX
V
= MIN, V
= 0,
CC
ICR
ICR
ICR
ICR
0.5
0.5
See Note 4
V
= 0.4 V,
I
I
= 15 mA,
= –5 mA,
O
OL
§
Positive-going threshold voltage
V
V
IT+
See Note 3
V
= 5 V,
V
= MAX,
= 0,
CC
See Note 5
1
1
V
= MIN, V
CC
See Note 4
¶
¶
–0.5
–0.5
V
O
= 2.4 V,
OL
§
Negative-going threshold voltage
V
V
V
V
V
V
IT–
See Note 3
V
= 5 V,
V
= MAX,
CC
See Note 5
¶
–1
¶
6
–1
15
to
–15
#
to
0
Input voltage range
V
CC
= 5 V,
V
= –1 V or 1 V, See Note 3
I
ID
V
V
= MIN,
= 0,
V
= –0.5 V,
CC
ICR
ID
See Notes 4 and 6
2.4
2.4
2.4
2.4
I
= –5 mA,
OH
High-level output voltage
OH
See Note 3
V
V
= 5 V,
= MAX,
V
= –1 V,
CC
ICR
ID
See Note 5
V
V
= MIN,
= 0,
V
= 0.5 V,
CC
ICR
ID
See Notes 4 and 7
0.4
0.4
0.4
0.4
I
= 15 mA,
OL
See Note 3
V
Low-level output voltage
Receiver input current
V
OL
V
V
= 5 V,
= MAX,
V
ID
= 1 V,
CC
ICR
See Note 5
V = 0,
I
Other input at 0 V
Other input at 2.4 V
Other input at 0.4 V
–0.5
–0.4
0.1
–0.9
–0.7
0.3
–0.5
–0.4
0.1
–1
–0.8
0.4
V
= MAX,
CC
See Note 3
I
I
V = 0.4 V,
I
mA
I(rec)
V = 2.4 V,
I
V
V
= MIN,
V
= –0.5 V,
CC
strobe
= MAX,
ID
Strobe
Enable
’116, SN75117
5
1
5
1
µA
Input current at maximum
input voltage
= 4.5 V
I
V
V = 5.5 V
I
SN75118, SN75119
mA
CC
†
Unless otherwise noted, V
= 2.4 V. All parameters, with the exception of off-state open-collector output current, are measured with the active pullup connected to the sink output.
strobe
For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions.
‡
§
¶
#
All typical values are at V
= 5 V, T = 25°C, and V = 0.
CC
A
IC
Differential voltages are at the B input terminal with respect to the A input terminal. Neither receiver input of the SN75117 or SN75119 should be taken negative with respect to GND.
The algebraic convention, where the less positive (more negative) limit is designated as minimum, is used in this data sheet for threshold voltages only.
Input voltage range is the voltage range that, if exceeded at either input, will cause the receiver to cease functioning properly.
NOTES: 3. Measurement of these characteristics on the SN75117 and SN75119 requires the driver to be disabled with the driver enable at 0.8 V.
4. This applies with the less positive receiver input grounded.
5. For ’116 and SN75118, this applies with the more positive receiver input at 15 V or the more negative receiver input at – 15 V. For SN75117 and SN75119, this applies
with the more positive receiver input at 6 V.
6. For SN55116, V = –1 V
ID
7. For SN55116, V = 1 V
ID
receiver section (continued)
’116, SN75118
SN75117, SN75119
†
PARAMETER
UNIT
TEST CONDITIONS
V = 2.4 V
‡
‡
MIN TYP
MAX
MIN TYP
MAX
I
I
High-level input current
Low-level input current
Enable
Strobe
Enable
V
= MAX,
= MAX,
SN75118, SN75119
’116, SN75117
40
40
µA
IH
CC
I
V
V
V
= 0.5 V,
CC
strobe
ID
See Notes 4 and 7
–2.4
–1.6
–2.4
–1.6
= 0.4 V,
mA
mA
µA
I
V
CC
= MAX,
V = 0.4 V
I
SN75118, SN75119
V
CC
= MAX,
V
= 0.5 V,
ID
See Notes 4 and 7
I
Response-time-control current (RTC)
Off-state open-collector output current
T
A
= 25°C
–1.2
(RTC)
O(off)
RC at 0 V,
T
= 25°C
= MAX
= 25°C
= MAX
1
10
200
20
A
V
V
V
= MAX,
= 12 V,
= – 1 V
CC
O
ID
I
SN55116
T
A
SN75116, SN75118
SN75118, SN75119
SN75118
T
A
±10
±20
±10
±20
V
V
= MAX,
CC
O
Off-state (high-impedance-state)
output current
I
µA
= 0 to V
,
CC
OZ
T
A
RE at 0.4 V
SN75119
R
Line-terminating resistance
V
= 5 V
T
A
= 25°C
77
167
–80
Ω
T
CC
V
V
= MAX,
= – 0.5 V,
V
= 0,
CC
ID
O
I
§
T
A
= 25°C
–15
–15
–80
60
mA
OS
Short-circuit output current
See Notes 4 and 6
V = 0.5 V,
ID
Short current (driver and
receiver combined)
V
CC
= MAX,
I
T
A
= 25°C
42
60
42
mA
CC
See Notes 4 and 7
†
Unlessotherwisenoted, V
=2.4V. Allparameters, withtheexceptionofoff-stateopen-collectoroutputcurrent, aremeasuredwiththeactivepullupconnectedtothesinkoutput.
strobe
For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions.
‡
§
All typical values are at V
Not more than one output should be shorted at a time.
= 5 V, T = 25°C, and V = 0.
CC
A
IC
NOTES: 4. This applies with the less positive receiver input grounded.
6. For SN55116, V = –1 V
ID
7. For SN55116, V = 1 V
ID
SN55116, SN75116, SN75117, SN75118, SN75119
DIFFERENTIAL LINE TRANSCEIVERS
SLLS073D – MAY 1976 – REVISED MAY 1998
switching characteristics, V
receiver section
= 5 V, C = 30 pF, T = 25°C
L A
CC
PARAMETER
TEST CONDITIONS
MIN
TYP
20
17
9
MAX
75
UNIT
ns
t
t
t
t
t
t
Propagation-delay time, low-to-high-level output
Propagation-delay time, high-to-low-level output
Output-enable time to high level
PLH
PHL
PZH
PZL
PHZ
PLZ
R
= 400 Ω,
See Figure 16
L
75
ns
R
R
R
R
= 480 Ω,
= 250 Ω,
= 480 Ω,
= 250 Ω,
See Figure 14
See Figure 15
See Figure 14
See Figure 15
20
ns
L
L
L
L
SN75118
and
SN75119
only
Output-enable time to low level
16
12
17
35
ns
Output-disable time from high level
Output-disable time from low level
30
ns
35
ns
11
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN55116, SN75116, SN75117, SN75118, SN75119
DIFFERENTIAL LINE TRANSCEIVERS
SLLS073D – MAY 1976 – REVISED MAY 1998
†
TYPICAL CHARACTERISTICS
DRIVER
OUTPUT VOLTAGE
vs
DRIVER
OUTPUT VOLTAGE
vs
INPUT VOLTAGE
INPUT VOLTAGE
6
5
4
3
2
1
0
6
5
4
3
2
1
0
No Load
V
= 5 V
CC
No Load
T
= 25°C
A
V
CC
V
CC
V
CC
= 5.5 V
= 5 V
= 4.5 V
T
= – 55°C
= 25°C
A
T
A
T
A
= 125°C
0
1
2
3
4
0
1
2
3
4
V – Input Voltage – V
I
V – Input Voltage – V
I
Figure 1
Figure 2
DRIVER
DRIVER
HIGH-LEVEL OUTPUT VOLTAGE
vs
LOW-LEVEL OUTPUT VOLTAGE
vs
HIGH-LEVEL OUTPUT CURRENT
LOW-LEVEL OUTPUT CURRENT
0.6
0.5
0.4
0.3
0.2
0.1
0
6
5
4
3
2
1
0
T
= 25°C
T
A
= 25°C
A
V
CC
= 4.5 V
V
CC
= 5.5 V
V
CC
= 5 V
V
CC
= 5.5 V
V
CC
= 4.5 V
0
20
40
50
80
100
120
0
–20
–40
–60
–80
–100
I
– Low-Level Output Current – mA
I
– High-Level Output Current – mA
OL
OH
Figure 3
Figure 4
†
Operation of the device at these or any other conditions beyond those indicated under ‘‘recommended operating conditions” is not implied.
12
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN55116, SN75116, SN75117, SN75118, SN75119
DIFFERENTIAL LINE TRANSCEIVERS
SLLS073D – MAY 1976 – REVISED MAY 1998
†
TYPICAL CHARACTERISTICS
DRIVER
OUTPUT-ENABLE AND DISABLE TIME
vs
DRIVER
PROPAGATION-DELAY TIME
vs
FREE-AIR TEMPERATURE
FREE-AIR TEMPERATURE
30
25
20
18
16
14
12
10
8
V
C
= 5 V
V
= 5 V
CC
= 30 pF
CC
See Note A
L
See Figure 13
t
PLH
t
PLZ
20
15
t
PZL
t
PHL
t
PHZ
10
5
6
t
PZH
4
2
0
0
–75
0
25
50
75
100 125
–50 –25
–75
0
25
50
75
100 125
–50 –25
T
and t
– Free-Air Temperature – °C
: R = 480 Ω, see Figure 14. For t
PHZ L PZL
L
A
T
A
– Free-Air Temperature – °C
NOTE A: For t
PZH
and t
: R = 250 Ω, see Figure 15.
PLZ
Figure 5
Figure 6
RECEIVER
OUTPUT VOLTAGE
vs
RECEIVER
OUTPUT VOLTAGE
vs
DIFFERENTIAL INPUT VOLTAGE
DIFFERENTIAL INPUT VOLTAGE
6
5
4
3
2
1
6
5
4
3
2
1
V
V
= 5.5 V
= 5 V
CC
Load = 2 kΩ to V
V
= 5 V
CC
CC
Load = 2 kΩ to V
T
= 25°C
A
CC
CC
V
= 4.5 V
CC
T
A
= 125°C
T
A
= 25°C
T
A
= –55°C
0
–0.2
0
–0.2
–0.1
0
0.1
0.2
–0.1
0
0.1
0.2
V
ID
– Differential Input Voltage – V
V
ID
– Differential Input Voltage – V
Figure 7
Figure 8
†
Operation of the device at these or any other conditions beyond those indicated under ‘‘recommended operating conditions” is not implied.
13
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN55116, SN75116, SN75117, SN75118, SN75119
DIFFERENTIAL LINE TRANSCEIVERS
SLLS073D – MAY 1976 – REVISED MAY 1998
†
TYPICAL CHARACTERISTICS
RECEIVER
RECEIVER
PROPAGATION-DELAY TIME
vs
OUTPUT-ENABLE AND DISABLE TIME
vs
FREE-AIR TEMPERATURE
FREE-AIR TEMPERATURE
30
25
30
25
V
= 5 V
CC
See Note A
V
R
= 5 V
= 400 Ω
See Figure 16
CC
L
t
PLZ
t
PLH
20
15
20
15
t
PZL
t
PHL
t
PHZ
10
5
10
5
t
PZH
0
0
–75
–75
0
25
50
75
100 125
–50 –25
0
25
50
75
100 125
–50 –25
T
A
– Free-Air Temperature – °C
and t :R = 480 Ω, see Figure 14. For t
PHZ L PZL
: R = 250 Ω, see Figure 15.
T
A
– Free-Air Temperature – °C
NOTE A: For t
PZH
and t
PLZ
L
Figure 9
Figure 10
DRIVER AND RECEIVER
SUPPLY CURRENT
vs
DRIVER AND RECEIVER
SUPPLY CURRENT
vs
SUPPLY VOLTAGE
FREE-AIR TEMPERATURE
80
70
60
50
50
45
40
35
30
25
20
15
No Load
= 25°C
V
CC
= 5 V
T
A
40
30
20
10
10
5
0
–75
0
0
25
50
75
100 125
0
1
2
3
4
5
6
7
8
–50 –25
V
CC
– Supply Voltage – V
T
A
– Free-Air Temperature – °C
Figure 11
Figure 12
†
Operation of the device at these or any other conditions beyond those indicated under ‘‘recommended operating conditions” is not implied.
14
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN55116, SN75116, SN75117, SN75118, SN75119
DIFFERENTIAL LINE TRANSCEIVERS
SLLS073D – MAY 1976 – REVISED MAY 1998
PARAMETER MEASUREMENT INFORMATION
From Output
Under Test
Test
Point
From Output
Under Test
Test
Point
C = 30 pF
L
(see Note A)
C
= 30 pF
R
= 180 Ω
L
L
(see Note A)
LOAD CIRCUIT
LOAD CIRCUIT
≤ 5 ns
≤ 5 ns
3 V
0 V
≤ 5 ns
≤ 5 ns
90%
1.5 V
90%
1.5 V
Input
10%
3 V
0 V
90%
1.5 V
90%
1.5 V
10%
Input
t
PHL
t
PLH
10%
10%
V
OH
t
PZH
NAND
Output
1.5 V
1.5 V
V
OH
V
V
OL
Output
1.5 V
t
t
t
PHL
PLH
0.5 V
OH
V
off
= 0 V
AND
Output
PHZ
1.5 V
1.5 V
V
OL
VOLTAGE WAVEFORMS
and t
VOLTAGE WAVEFORMS
and t (drivers only)
t
PZH
PHZ
t
PLH
PHL
Figure 13
Figure 14
5 V
5 V
Test
Point
R
= 250 Ω
L
R
= 400 Ω
L
From Output
Under Test
Test
Point
From Output
Under Test
C
= 30 pF
L
C
= 30 pF
See Note B
L
(see Note A)
(see Note A)
LOAD CIRCUIT
≤ 5 ns ≤ 5 ns
LOAD CIRCUIT
3 V
0 V
90%
1.5 V
90%
1.5 V
≤ 5 ns
≤ 5 ns
Input
V
10%
10%
B Input
(see Note C)
10%
H
90%
50%
90%
50%
t
PZL
See Note C
10%
V
L
t
t
PHL
PLH
t
PLZ
V
OH
V
= 5 V
off
0.5 V
1.5 V
1.5 V
1.5 V
Output
Output
V
OL
V
OL
VOLTAGE WAVEFORMS
and t
VOLTAGE WAVEFORMS
and t (receivers only)
t
PZL
PLZ
t
PLH
PHL
(SN75118 and SN75119 receivers only)
Figure 15
Figure 16
NOTES: A.
C includes probe and jig capacitance.
L
B. All diodes are 1N3064 or equivalent.
C. For ’116 and SN75118, V = 3 V, V = – 3 V, the A input is at 0 V.
H
L
For SN75117 and SN75119, V = 3 V, V = 0, the A input is at 1.5 V.
H
L
D. When testing the ’116 and SN75118 receiver sections, the response-time control and the termination resistor pins are left open.
15
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue
any product or service without notice, and advise customers to obtain the latest version of relevant information
to verify, before placing orders, that information being relied on is current and complete. All products are sold
subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those
pertaining to warranty, patent infringement, and limitation of liability.
TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent
TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily
performed, except those mandated by government requirements.
CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF
DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL
APPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR
WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER
CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO
BE FULLY AT THE CUSTOMER’S RISK.
In order to minimize risks associated with the customer’s applications, adequate design and operating
safeguards must be provided by the customer to minimize inherent or procedural hazards.
TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent
that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other
intellectual property right of TI covering or relating to any combination, machine, or process in which such
semiconductor products or services might be or are used. TI’s publication of information regarding any third
party’s products or services does not constitute TI’s approval, warranty or endorsement thereof.
Copyright 1998, Texas Instruments Incorporated
相关型号:
©2020 ICPDF网 联系我们和版权申明