SN75478PE4 [TI]

Dual Peripheral Drivers 8-PDIP 0 to 70;
SN75478PE4
型号: SN75478PE4
厂家: TEXAS INSTRUMENTS    TEXAS INSTRUMENTS
描述:

Dual Peripheral Drivers 8-PDIP 0 to 70

驱动 光电二极管 接口集成电路 驱动器
文件: 总14页 (文件大小:403K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
SN75476 THRU SN75478  
DUAL PERIPHERAL DRIVERS  
SLRS025A – DECEMBER 1976 – REVISED NOVEMBER 1995  
D OR P PACKAGE  
(TOP VIEW)  
Characterized for Use to 300 mA  
No Output Latch-Up at 55 V (After  
Conducting 300 mA)  
S
1A  
V
CC  
2A  
1
2
3
4
8
7
6
5
High-Voltage Outputs (100 V Typ)  
1Y  
2Y  
Output Clamp Diodes for Transient  
Suppression (300 mA, 70 V)  
GND  
CLAMP  
TTL- or MOS-Compatible Diode-Clamped  
Inputs  
Function Tables  
pnp Transistor Inputs Reduce Input Current  
Standard Supply Voltage  
SN75476  
(each AND driver)  
Suitable for Hammer-Driver Applications  
Plastic DIP (P) With Copper-Lead Frame  
Provides Cooler Operation and Improved  
Reliability  
INPUTS  
OUTPUT  
Y
A
S
H
L
X
H
X
L
H
L
L
description  
SN75477  
(each NAND driver)  
The SN75476 through SN75478 are dual  
peripheraldriversdesignedforuseinsystemsthat  
require high current, high voltage, and fast  
switching times. The SN75476, SN75477, and  
SN75478 provide AND, NAND, and OR drivers  
respectively. These devices have diode-clamped  
inputs as well as high-current, high-voltage clamp  
diodes on the outputs for inductive transient  
protection.  
INPUTS  
OUTPUT  
Y
A
S
H
L
X
H
X
L
L
H
H
SN75478  
(each OR driver)  
INPUTS  
OUTPUT  
Y
The SN75476, SN75477, and SN75478 drivers  
are characterized for operation from 0°C to 70°C.  
A
S
H
X
L
X
H
L
H
H
L
schematics of inputs and outputs  
H = high level, L = low level  
X = irrelevant  
EQUIVALENT  
OF EACH INPUT  
TYPICAL  
OF ALL OUTPUTS  
CLAMP  
V
CC  
Output  
Input  
GND  
Copyright 1995, Texas Instruments Incorporated  
PRODUCTION DATA information is current as of publication date.  
Products conform to specifications per the terms of Texas Instruments  
standard warranty. Production processing does not necessarily include  
testing of all parameters.  
1
POST OFFICE BOX 655303 DALLAS, TEXAS 75265  
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251–1443  
SN75476 THRU SN75478  
DUAL PERIPHERAL DRIVERS  
SLRS025A – DECEMBER 1976 – REVISED NOVEMBER 1995  
logic symbols  
logic diagrams (positive logic)  
SN75476  
3
6
SN75476  
2
1Y  
2Y  
2
1
7
3
1A  
&
1A  
S
1Y  
1
CLAMP  
S
6
5
2Y  
7
2A  
CLAMP  
2A  
5
4
CLAMP  
GND  
Positive Logic: Y = AS or A+S  
SN75477  
3
6
SN75477  
&
2
1Y  
2Y  
2
1
7
3
1A  
1A  
S
1Y  
1
CLAMP  
S
6
5
2Y  
7
2A  
CLAMP  
2A  
5
4
CLAMP  
GND  
Positive Logic: Y = AS or A+S  
SN75478  
3
6
SN75478  
2
1Y  
2Y  
2
1
7
3
1A  
1  
1A  
S
1Y  
1
CLAMP  
S
6
5
2Y  
7
2A  
CLAMP  
2A  
5
4
CLAMP  
GND  
Positive Logic: Y = A+S or A S  
These symbols are in accordance with ANSI/IEEE Std 91-1984  
and IEC publication 617-12.  
2
POST OFFICE BOX 655303 DALLAS, TEXAS 75265  
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251–1443  
SN75476 THRU SN75478  
DUAL PERIPHERAL DRIVERS  
SLRS025A – DECEMBER 1976 – REVISED NOVEMBER 1995  
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)  
Supply voltage, V  
(see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V  
CC  
Input voltage, V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 V  
I
Continuous output current (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 mA  
Peak output current: t 10 ms, duty cycle 50% . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500 mA  
w
t
30 ns, duty cycle 0.002% . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 A  
w
OK  
Output clamp current, I  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 mA  
Continuous total power dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table  
Operating free-air temperature range, T  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C  
A
Storage temperature range, T  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65°C to 150°C  
stg  
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C  
NOTES: 1. Voltage values are with respect to network GND.  
2. Both halves of this dual circuit may conduct rated current simultaneously; however, power dissipation averaged over a short time  
interval must fall within the continuous power dissipation ratings.  
DISSIPATION RATING TABLE  
T
25°C  
DERATING FACTOR  
T = 70°C  
A
POWER RATING  
A
PACKAGE  
POWER RATING  
ABOVE T = 25°C  
A
D
P
725 mW  
5.8 mW/°C  
8.0 mW/°C  
464 mW  
1000 mW  
640 mW  
recommended operating conditions  
MIN NOM  
4.5  
MAX  
UNIT  
V
Supply voltage, V  
CC  
5
5.5  
High-level input voltage, V  
IH  
2
V
Low-level input voltage, V  
0.8  
70  
V
IL  
Operating free-air temperature, T  
0
°C  
A
3
POST OFFICE BOX 655303 DALLAS, TEXAS 75265  
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251–1443  
SN75476 THRU SN75478  
DUAL PERIPHERAL DRIVERS  
SLRS025A – DECEMBER 1976 – REVISED NOVEMBER 1995  
electrical characteristics over recommended operating free-air temperature range  
PARAMETER  
Input clamp voltage  
TEST CONDITIONS  
MIN TYP  
MAX  
1.5  
0.3  
UNIT  
V
IK  
I = –12 mA  
0.95  
0.16  
0.22  
0.33  
100  
V
I
I
I
I
I
I
I
= 100 mA  
= 175 mA  
= 300 mA  
= 100 µA  
OL  
OL  
OL  
OH  
V
V
V
= 4.5 V,  
= 2 V,  
= 0.8 V  
CC  
IH  
IL  
V
OL  
Low-level output voltage  
0.5  
V
0.6  
V
V
V
Output breakdown voltage  
Output clamp reverse voltage  
Output clamp forward voltage  
V
V
V
= 4.5 V,  
= 4.5 V,  
= 4.5 V,  
= 4.5 V,  
70  
70  
V
V
V
O(BR)  
CC  
CC  
CC  
CC  
= 100 µA  
100  
R(K)  
R
F
= 300 mA  
0.8  
1.15  
1.6  
100  
10  
F(K)  
V
V
V
V
= 2 V,  
IH  
I
I
I
High-level output current  
High-level input current  
Low-level input current  
1
µA  
µA  
µA  
OH  
= 0.8 V,  
= 70 V  
IL  
OH  
V
= 5.5 V,  
V = 5.5 V  
I
0.01  
IH  
IL  
CC  
A input  
80 110  
V
= 5.5 V,  
V = 0.8 V  
I
CC  
S input  
160 220  
SN75476  
SN75477  
SN75478  
SN75476  
SN75477  
SN75478  
V = 5 V  
10  
10  
10  
54  
54  
54  
17  
17  
17  
75  
75  
75  
I
I
Supply current, outputs high  
Supply current, outputs low  
V
V
= 5.5 V  
= 5.5 V  
V = 0  
I
mA  
mA  
CCH  
CC  
V = 5 V  
I
V = 0  
I
I
V = 5 V  
I
CCL  
CC  
V = 0  
I
All typical values are at V  
= 5 V, T = 25°C.  
A
CC  
switching characteristics, V  
= 5 V, T = 25°C  
A
CC  
PARAMETER  
TEST CONDITIONS  
MIN  
TYP  
200  
200  
50  
MAX  
350  
350  
125  
125  
UNIT  
ns  
t
t
t
t
Propagation delay time, low-to-high-level output  
Propagation delay time, high-to-low-level output  
Transition time, low-to-high-level output  
PLH  
PHL  
TLH  
THL  
ns  
C
= 15 pF,  
R
= 100 ,  
L
L
See Figure 1  
ns  
Transition time, high-to-low-level output  
90  
ns  
V
= 55 V,  
I
O
300 mA,  
S
V
OH  
High-level output voltage after switching  
V
S
18  
mV  
See Figure 2  
4
POST OFFICE BOX 655303 DALLAS, TEXAS 75265  
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251–1443  
SN75476 THRU SN75478  
DUAL PERIPHERAL DRIVERS  
SLRS025A – DECEMBER 1976 – REVISED NOVEMBER 1995  
PARAMETER MEASUREMENT INFORMATION  
V
CC  
30 V  
Input  
2.4 V  
SN75476  
SN75477  
R
= 100 Ω  
L
A/S  
Output  
Circuit  
Under  
Test  
Pulse  
S/A  
Generator  
(see Note A)  
C
= 15 pF  
L
(see Note B)  
SN75478  
0.4 V  
Open  
TEST CIRCUIT  
5 ns  
10 ns  
3 V  
2.7 V  
1.5 V  
2.7 V  
1.5 V  
SN75446  
SN75448  
Input  
Input  
0.7 V  
0.7 V  
2.7 V  
0 V  
3 V  
5 µs  
5 ns  
10 ns  
2.7 V  
SN75447  
1.5 V  
1.5 V  
0.7 V  
0.7 V  
0 V  
t
t
PLH  
PHL  
V
OH  
OL  
90%  
90%  
Output  
50%  
10%  
50%  
10%  
V
t
t
TLH  
THL  
VOLTAGE WAVEFORMS  
NOTES: A. The pulse generator has the following characteristics: PRR = 100 kHz, Z = 50 .  
O
B.  
C includes probe and jig capacitance.  
L
Figure 1. Test Circuit and Voltage Waveforms, Switching Characteristics  
5
POST OFFICE BOX 655303 DALLAS, TEXAS 75265  
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251–1443  
SN75476 THRU SN75478  
DUAL PERIPHERAL DRIVERS  
SLRS025A – DECEMBER 1976 – REVISED NOVEMBER 1995  
PARAMETER MEASUREMENT INFORMATION  
V
S
= 55 V  
2.4 V  
5 V  
Input  
2 mH  
SN75476  
SN75477  
180 Ω  
Pulse  
Generator  
(see Note A)  
A
S
Circuit  
Under  
Test  
Output  
C
= 15 pF  
L
(see Note B)  
GND  
SN75478  
0.4 V  
TEST CIRCUIT  
5 ns  
10 ns  
3 V  
90%  
1.5 V  
90%  
1.5 V  
SN75476  
SN75478  
Input  
Input  
10%  
10%  
0 V  
3 V  
40 µs  
5 ns  
90%  
1.5 V  
10 ns  
90%  
SN75477  
1.5 V  
10%  
10%  
0 V  
V
V
OH  
Output  
OL  
VOLTAGE WAVEFORMS  
NOTES: A. The pulse generator has the following characteristics: PRR = 12.5 kHz, Z = 50 .  
O
B.  
C includes probe and jig capacitance.  
L
Figure 2. Latch-Up Test Circuit and Voltage Waveforms  
6
POST OFFICE BOX 655303 DALLAS, TEXAS 75265  
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251–1443  
IMPORTANT NOTICE  
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements,  
improvements, and other changes to its products and services at any time and to discontinue any product or service without notice.  
Customers should obtain the latest relevant information before placing orders and should verify that such information is current and  
complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.  
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s  
standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this  
warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily  
performed.  
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and  
applications using TI components. To minimize the risks associated with customer products and applications, customers should  
provide adequate design and operating safeguards.  
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask  
work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services  
are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such  
products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under  
the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI.  
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is  
accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an  
unfair and deceptive business practice. TI is not responsible or liable for such altered documentation.  
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service  
voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business  
practice. TI is not responsible or liable for any such statements.  
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would  
reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement  
specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications  
of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related  
requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any  
applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its  
representatives against any damages arising out of the use of TI products in such safety-critical applications.  
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are  
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military  
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is  
solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in  
connection with such use.  
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products  
are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any  
non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements.  
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:  
Products  
Amplifiers  
Data Converters  
DSP  
Applications  
Audio  
amplifier.ti.com  
dataconverter.ti.com  
dsp.ti.com  
www.ti.com/audio  
Automotive  
Broadband  
Digital Control  
Military  
www.ti.com/automotive  
www.ti.com/broadband  
www.ti.com/digitalcontrol  
www.ti.com/military  
Interface  
interface.ti.com  
logic.ti.com  
Logic  
Power Mgmt  
Microcontrollers  
power.ti.com  
Optical Networking  
Security  
www.ti.com/opticalnetwork  
www.ti.com/security  
microcontroller.ti.com  
www.ti.com/lpw  
Low Power  
Wireless  
Telephony  
www.ti.com/telephony  
Video & Imaging  
Wireless  
www.ti.com/video  
www.ti.com/wireless  
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265  
Copyright © 2007, Texas Instruments Incorporated  
PACKAGE OPTION ADDENDUM  
www.ti.com  
18-Sep-2008  
PACKAGING INFORMATION  
Orderable Device  
Status (1)  
Package Package  
Pins Package Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)  
Qty  
Type  
SOIC  
SOIC  
PDIP  
SOIC  
Drawing  
SN75476D  
SN75476DR  
SN75476P  
SN75477D  
OBSOLETE  
OBSOLETE  
OBSOLETE  
ACTIVE  
D
D
P
D
8
8
8
8
TBD  
TBD  
TBD  
Call TI  
Call TI  
Call TI  
Call TI  
Call TI  
Call TI  
75 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM  
no Sb/Br)  
SN75477DE4  
SN75477DG4  
SN75477DR  
SN75477DRE4  
SN75477DRG4  
SN75477P  
ACTIVE  
ACTIVE  
ACTIVE  
ACTIVE  
ACTIVE  
ACTIVE  
ACTIVE  
SOIC  
SOIC  
SOIC  
SOIC  
SOIC  
PDIP  
PDIP  
D
D
D
D
D
P
P
8
8
8
8
8
8
8
75 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM  
no Sb/Br)  
75 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM  
no Sb/Br)  
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM  
no Sb/Br)  
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM  
no Sb/Br)  
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM  
no Sb/Br)  
50  
Pb-Free  
(RoHS)  
CU NIPDAU N / A for Pkg Type  
SN75477PE4  
50  
Pb-Free  
(RoHS)  
CU NIPDAU N / A for Pkg Type  
SN75478D  
SN75478P  
OBSOLETE  
ACTIVE  
SOIC  
PDIP  
D
P
8
8
TBD  
Call TI  
Call TI  
50  
50  
Pb-Free  
(RoHS)  
CU NIPDAU N / A for Pkg Type  
SN75478PE4  
ACTIVE  
PDIP  
P
8
Pb-Free  
(RoHS)  
CU NIPDAU N / A for Pkg Type  
(1) The marketing status values are defined as follows:  
ACTIVE: Product device recommended for new designs.  
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.  
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in  
a new design.  
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.  
OBSOLETE: TI has discontinued the production of the device.  
(2)  
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check  
http://www.ti.com/productcontent for the latest availability information and additional product content details.  
TBD: The Pb-Free/Green conversion plan has not been defined.  
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements  
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered  
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.  
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and  
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS  
compatible) as defined above.  
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame  
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)  
(3)  
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder  
temperature.  
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is  
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the  
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take  
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on  
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited  
Addendum-Page 1  
PACKAGE OPTION ADDENDUM  
www.ti.com  
18-Sep-2008  
information may not be available for release.  
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI  
to Customer on an annual basis.  
Addendum-Page 2  
PACKAGE MATERIALS INFORMATION  
www.ti.com  
19-Mar-2008  
TAPE AND REEL INFORMATION  
*All dimensions are nominal  
Device  
Package Package Pins  
Type Drawing  
SPQ  
Reel  
Reel  
A0 (mm)  
B0 (mm)  
K0 (mm)  
P1  
W
Pin1  
Diameter Width  
(mm) W1 (mm)  
(mm) (mm) Quadrant  
SN75477DR  
SOIC  
D
8
2500  
330.0  
12.4  
6.4  
5.2  
2.1  
8.0  
12.0  
Q1  
Pack Materials-Page 1  
PACKAGE MATERIALS INFORMATION  
www.ti.com  
19-Mar-2008  
*All dimensions are nominal  
Device  
Package Type Package Drawing Pins  
SOIC  
SPQ  
Length (mm) Width (mm) Height (mm)  
340.5 338.1 20.6  
SN75477DR  
D
8
2500  
Pack Materials-Page 2  
MECHANICAL DATA  
MPDI001A – JANUARY 1995 – REVISED JUNE 1999  
P (R-PDIP-T8)  
PLASTIC DUAL-IN-LINE  
0.400 (10,60)  
0.355 (9,02)  
8
5
0.260 (6,60)  
0.240 (6,10)  
1
4
0.070 (1,78) MAX  
0.325 (8,26)  
0.300 (7,62)  
0.020 (0,51) MIN  
0.015 (0,38)  
Gage Plane  
0.200 (5,08) MAX  
Seating Plane  
0.010 (0,25) NOM  
0.125 (3,18) MIN  
0.100 (2,54)  
0.021 (0,53)  
0.430 (10,92)  
MAX  
0.010 (0,25)  
M
0.015 (0,38)  
4040082/D 05/98  
NOTES: A. All linear dimensions are in inches (millimeters).  
B. This drawing is subject to change without notice.  
C. Falls within JEDEC MS-001  
For the latest package information, go to http://www.ti.com/sc/docs/package/pkg_info.htm  
POST OFFICE BOX 655303 DALLAS, TEXAS 75265  
IMPORTANT NOTICE  
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,  
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should  
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are  
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.  
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard  
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where  
mandated by government requirements, testing of all parameters of each product is not necessarily performed.  
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and  
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide  
adequate design and operating safeguards.  
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,  
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information  
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a  
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual  
property of the third party, or a license from TI under the patents or other intellectual property of TI.  
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied  
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive  
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional  
restrictions.  
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all  
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not  
responsible or liable for any such statements.  
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably  
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing  
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and  
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products  
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be  
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in  
such safety-critical applications.  
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are  
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military  
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at  
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.  
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are  
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated  
products in automotive applications, TI will not be responsible for any failure to meet such requirements.  
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:  
Products  
Amplifiers  
Applications  
Audio  
Automotive  
Broadband  
Digital Control  
Medical  
Military  
Optical Networking  
Security  
amplifier.ti.com  
dataconverter.ti.com  
www.dlp.com  
www.ti.com/audio  
Data Converters  
DLP® Products  
DSP  
Clocks and Timers  
Interface  
www.ti.com/automotive  
www.ti.com/broadband  
www.ti.com/digitalcontrol  
www.ti.com/medical  
www.ti.com/military  
www.ti.com/opticalnetwork  
www.ti.com/security  
www.ti.com/telephony  
www.ti.com/video  
dsp.ti.com  
www.ti.com/clocks  
interface.ti.com  
logic.ti.com  
power.ti.com  
microcontroller.ti.com  
www.ti-rfid.com  
Logic  
Power Mgmt  
Microcontrollers  
RFID  
Telephony  
Video & Imaging  
Wireless  
RF/IF and ZigBee® Solutions www.ti.com/lprf  
www.ti.com/wireless  
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265  
Copyright © 2009, Texas Instruments Incorporated  

相关型号:

SN75478PP3

IC IC,PERIPHERAL DRIVER,2 DRIVER,BIPOLAR,DIP,8PIN,PLASTIC, Peripheral Driver
TI

SN75479DR

3A 2 CHANNEL, BUF OR INV BASED PRPHL DRVR, PDSO8
TI

SN75491

QUAD SEGMENT DRIVER AND HEX DIGIT DRIVER FOR INTERFACING BETWEEN MOS AND LIGHT EMITTING-DIODE (LED) DISPLAYS
TI

SN75491A

QUAD SEGMENT DRIVER AND HEX DIGIT DRIVER FOR INTERFACING BETWEEN MOS AND LIGHT EMITTING-DIODE (LED) DISPLAYS
TI

SN75491AN

IC,LED DISPLAY DRIVER,4-SEG,COMMON-CATHODE,BIPOLAR,DIP,14PIN,PLASTIC
TI

SN75492

QUAD SEGMENT DRIVER AND HEX DIGIT DRIVER FOR INTERFACING BETWEEN MOS AND LIGHT EMITTING-DIODE (LED) DISPLAYS
TI

SN75492A

QUAD SEGMENT DRIVER AND HEX DIGIT DRIVER FOR INTERFACING BETWEEN MOS AND LIGHT EMITTING-DIODE (LED) DISPLAYS
TI

SN75492AN

IC,LED DISPLAY DRIVER,COMMON-CATHODE,BIPOLAR,DIP,14PIN,PLASTIC
TI

SN75497N3

IC IC,LED DISPLAY DRIVER,7-SEG,COMMON-CATHODE,TTL,DIP,16PIN,PLASTIC, Display Driver
TI

SN75498N

IC,LED DISPLAY DRIVER,9-SEG,COMMON-CATHODE,TTL,DIP,20PIN,PLASTIC
TI

SN75498NP3

IC IC,LED DISPLAY DRIVER,9-SEG,COMMON-CATHODE,TTL,DIP,20PIN,PLASTIC, Display Driver
TI

SN75500AN

AC Plasma Driver
ROCHESTER