TL317CPWRE4 [TI]
3-TERMINAL ADJUSTABLE REGULATOR; 三端可调稳压器
| 型号： | TL317CPWRE4 |
| 厂家： | 
TEXAS INSTRUMENTS |
| 描述： | 3-TERMINAL ADJUSTABLE REGULATOR |
| 文件： | 总17页 (文件大小：454K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
ꢀꢁ ꢂꢃ ꢄ
ꢂ ꢅꢀ ꢆꢇꢈ ꢉꢊꢋ ꢁ ꢋꢌꢍ ꢎꢏ ꢀꢋꢐꢁ ꢆ ꢇꢆꢑ ꢎ ꢁꢋꢀꢒ ꢇ
SLVS004G − APRIL 1979 − REVISED SEPTEMBER 2009
D OR PW PACKAGE
(TOP VIEW)
D
Output Voltage Range Adjustable From
1.2 V to 32 V When Used With an External
Resistor Divider
INPUT
NC
1
2
3
4
8
7
6
5
D
D
Output Current Capability of 100 mA
OUTPUT
OUTPUT
ADJUSTMENT
OUTPUT
OUTPUT
NC
Input Regulation Typically 0.01% Per
Input-Voltage Change
D
Output Regulation Typically 0.5%
Ripple Rejection Typically 80 dB
NC − No internal connection
OUTPUT terminals are all internally connected.
D
description/ordering information
PS PACKAGE
(TOP VIEW)
The TL317 is an adjustable three-terminal
positive-voltage regulator capable of supplying
100 mA over an output-voltage range of 1.2 V to
32 V. It is exceptionally easy to use and requires
only two external resistors to set the output
voltage.
INPUT
NC
OUTPUT
NC
ADJUSTMENT
NC
1
2
3
4
8
7
6
5
NC
NC
In addition to higher performance than fixed
regulators, this regulator offers full overload
protection available only in integrated circuits.
Included on the chip are current-limiting and
NC − No internal connection
LP PACKAGE
(TOP VIEW)
thermal-overload
protection.
All
overload-protection circuitry remains fully
functional, even when ADJUSTMENT is
disconnected. Normally, no capacitors are
needed unless the device is situated far from the
input filter capacitors, in which case an input
bypass is needed. An optional output capacitor
can be added to improve transient response.
ADJUSTMENT can be bypassed to achieve very
high ripple rejection, which is difficult to achieve
with standard three-terminal regulators.
INPUT
OUTPUT
ADJUSTMENT
In addition to replacing fixed regulators, the TL317 regulator is useful in a wide variety of other applications.
Since the regulator is floating and sees only the input-to-output differential voltage, supplies of several hundred
volts can be regulated as long as the maximum input-to-output differential is not exceeded. Its primary
application is that of a programmable output regulator, but by connecting a fixed resistor between
ADJUSTMENT and OUTPUT, this device can be used as a precision current regulator. Supplies with electronic
shutdown can be achieved by clamping ADJUSTMENT to ground, programming the output to 1.2 V, where most
loads draw little current.
The TL317C is characterized for operation over the virtual-junction temperature range of 0°C to 125°C.
The TL317 is characterized for operation over the virtual-junction temperature range of −20°C to 125°C.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
ꢓ
ꢓ
ꢇ
ꢒ
ꢤ
ꢌ
ꢟ
ꢎ
ꢔ
ꢝ
ꢀ
ꢞ
ꢉ
ꢘ
ꢒ
ꢖ
ꢊ
ꢗ
ꢌ
ꢋ
ꢀ
ꢋ
ꢕ
ꢖ
ꢠ
ꢗ
ꢘ
ꢞ
ꢙ
ꢚ
ꢛ
ꢛ
ꢜ
ꢜ
ꢕ
ꢕ
ꢘ
ꢘ
ꢖ
ꢖ
ꢕ
ꢝ
ꢝ
ꢡ
ꢞ
ꢟ
ꢙ
ꢙ
ꢠ
ꢠ
ꢖ
ꢜ
ꢛ
ꢚ
ꢝ
ꢝ
ꢘ
ꢗ
ꢡ
ꢀꢠ
ꢟ
ꢢ
ꢝ
ꢣ
ꢕ
ꢞ
ꢛ
ꢝ
ꢜ
ꢕ
ꢜ
ꢘ
ꢙ
ꢖ
ꢟ
ꢤ
ꢛ
ꢖ
ꢜ
ꢜ
ꢠ
ꢝ
ꢥ
Copyright 2009, Texas Instruments Incorporated
ꢙ
ꢘ
ꢞ
ꢜ
ꢘ
ꢙ
ꢚ
ꢜ
ꢘ
ꢝ
ꢡ
ꢕ
ꢗ
ꢕ
ꢞ
ꢠ
ꢙ
ꢜ
ꢦ
ꢜ
ꢠ
ꢙ
ꢘ
ꢗ
ꢧ
ꢛ
ꢉ
ꢖ
ꢚ
ꢠ
ꢝ
ꢜ
ꢛ
ꢖ
ꢤ
ꢛ
ꢙ
ꢤ
ꢨ
ꢛ
ꢜ ꢠ ꢝ ꢜꢕ ꢖꢪ ꢘꢗ ꢛ ꢣꢣ ꢡꢛ ꢙ ꢛ ꢚ ꢠ ꢜ ꢠ ꢙ ꢝ ꢥ
ꢙ
ꢙ
ꢛ
ꢖ
ꢜ
ꢩ
ꢥ
ꢓ
ꢙ
ꢘ
ꢤ
ꢟ
ꢞ
ꢜ
ꢕ
ꢘ
ꢖ
ꢡ
ꢙ
ꢘ
ꢞ
ꢠ
ꢝ
ꢝ
ꢕ
ꢖ
ꢪ
ꢤ
ꢘ
ꢠ
ꢝ
ꢖ
ꢘ
ꢜ
ꢖ
ꢠ
ꢞ
ꢠ
ꢝ
ꢝ
ꢛ
ꢙ
ꢕ
ꢣ
ꢩ
ꢕ
ꢖ
ꢞ
ꢣ
ꢟ
ꢤ
ꢠ
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
ꢀ ꢁ ꢂ ꢃꢄ
ꢂꢅ ꢀ ꢆꢇ ꢈꢉ ꢊ ꢋ ꢁ ꢋ ꢌꢍ ꢎꢏ ꢀꢋꢐ ꢁꢆ ꢇꢆ ꢑ ꢎꢁꢋꢀꢒꢇ
SLVS004G − APRIL 1979 − REVISED SEPTEMBER 2009
ORDERING INFORMATION
ORDERABLE
PART NUMBER
TOP-SIDE
MARKING
†
T
J
PACKAGE
Tube of 75
TL317CD
SOIC (D)
TL317C
TL317C
Reel of 2500
Bulk of 1000
Reel of 2000
Tube of 150
Reel of 2000
Bulk of 1000
Tube of 80
TL317CDR
TL317CLP
TL317CLPR
TL317CPW
TL317CPWR
TL317LP
0°C to 125°C
TO-226 / TO-92 (LP)
TSSOP (PW)
TO-226 / TO-92 (LP)
SOP (PS)
T317
TL317
T317
−20°C to 125°C
TL317PS
Reel of 2000
TL317PSR
†
Package drawings, standard packing quantities, thermal data, symbolization, and PCB design
guidelines are available at www.ti.com/sc/package.
2
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
ꢀꢁ ꢂꢃ ꢄ
ꢂ ꢅꢀ ꢆꢇꢈ ꢉꢊꢋ ꢁ ꢋꢌꢍ ꢎꢏ ꢀꢋꢐꢁ ꢆ ꢇꢆꢑ ꢎ ꢁꢋꢀꢒ ꢇ
SLVS004G − APRIL 1979 − REVISED SEPTEMBER 2009
schematic
INPUT
310 Ω
310 Ω
190 Ω
251 W
5.6 kΩ
2.1 kΩ
360 Ω
200 kΩ
11.5 kΩ
1.4 Ω
124 Ω
30
pF
2.12 kΩ
30
pF
195 Ω
670 Ω
5.3 kΩ 5.7 kΩ 70 Ω
5.1 kΩ
10.8 kΩ
OUTPUT
ADJUSTMENT
40 Ω
NOTE A: All component values shown are nominal.
†
absolute maximum ratings over operating temperature range (unless otherwise noted)
Input-to-output differential voltage, V − V
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 V
l
O
Package thermal impedance, θ (see Notes 1 and 2): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97°C/W
JA
LP package . . . . . . . . . . . . . . . . . . . . . . . . . . 140°C/W
PS package . . . . . . . . . . . . . . . . . . . . . . . . . . 95°C/W
PW package . . . . . . . . . . . . . . . . . . . . . . . . . 149°C/W
Operating virtual junction temperature, T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150°C
J
Storage temperature range, T
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C
stg
†
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. Maximum power dissipation is a function of T (max), θ , and T . The maximum allowable power dissipation at any allowable
J
JA
A
ambient temperature is P = (T (max) − T )/θ . Operating at the absolute maximum T of 150°C can affect reliability.
D
J
A
JA
J
2. The package thermal impedance is calculated in accordance with JESD 51-7.
recommended operating conditions
MIN
MAX
35
UNIT
V
V − V
Input-to-output voltage differential
Output current
I
O
I
O
2.5
0
100
125
125
mA
°C
TL317C
TL317
T
J
Operating virtual-junction temperature
−20
°C
3
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
ꢀ ꢁ ꢂ ꢃꢄ
ꢂꢅ ꢀ ꢆꢇ ꢈꢉ ꢊ ꢋ ꢁ ꢋ ꢌꢍ ꢎꢏ ꢀꢋꢐ ꢁꢆ ꢇꢆ ꢑ ꢎꢁꢋꢀꢒꢇ
SLVS004G − APRIL 1979 − REVISED SEPTEMBER 2009
electrical characteristics over recommended operating virtual-junction temperature range (unless
otherwise noted)
TL317C
†
PARAMETER
UNIT
TEST CONDITIONS
MIN
TYP
0.01
0.02
65
MAX
0.02
0.05
T = 25°C
J
Input voltage regulation (see Note 3)
V − V = 5 V to 35 V
%V
I
O
I
O
= 2.5 mA to 100 mA
V
V
= 10 V,
= 10 V,
f = 120 Hz
O
Ripple regulation
dB
O
66
80
10-µF capacitor between ADJUSTMENT and ground
V = 5 V to 35 V,
V
O
V
O
≤ 5 V
≥ 5 V
25
5
mV
I
I
= 2.5 mA to 100 mA,
O
mV/V
T = 25°C
J
Output voltage regulation
V
≤ 5 V
≥ 5 V
50
10
mV
V = 5 V to 35 V,
O
O
I
I
O
= 2.5 mA to 100 mA
V
mV/V
mV/V
Output voltage change with temperature
Output voltage long-term drift
Output noise voltage
T = 0°C to 125°C
J
10
After 1000 hours at T = 125°C and V − V = 35 V
3
10 mV/V
J
I
O
f = 10 Hz to 10 kHz,
V − V = 35 V
T = 25°C
J
30
µV/V
Minimum output current to maintain regulation
Peak output current
1.5
200
50
2.5
mA
mA
µA
I
O
V − V ≤ 35 V
100
1.2
I
O
ADJUSTMENT current
100
5
Change in ADJUSTMENT current
V − V = 2.5 V to 35 V,
I
I
= 2.5 mA to 100 mA
= 2.5 mA to 100 mA,
0.2
µA
I
O
O
V − V = 5 V to 35 V,
I
O
O
Reference voltage (output to ADJUSTMENT)
1.25
1.3
V
P ≤ rated dissipation
†
Unless otherwise noted, these specifications apply for the following test conditions: V − V = 5 V and I = 40 mA. Pulse-testing techniques must
I
O
O
be used that maintain the junction temperature as close to the ambient temperature as possible. All characteristics are measured with a 0.1-µF
capacitor across the input and a 1-µF capacitor across the output.
NOTE 3: Input voltage regulation is expressed here as the percentage change in output voltage per 1-V change at the input.
4
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
ꢀꢁ ꢂꢃ ꢄ
ꢂ ꢅꢀ ꢆꢇꢈ ꢉꢊꢋ ꢁ ꢋꢌꢍ ꢎꢏ ꢀꢋꢐꢁ ꢆ ꢇꢆꢑ ꢎ ꢁꢋꢀꢒ ꢇ
SLVS004G − APRIL 1979 − REVISED SEPTEMBER 2009
APPLICATION INFORMATION
TL317
Output
Adjustment
V
O
V
I
TL317
Input
(see Note B)
V
O
35 V
Input
Output
(see Note A)
R1
470 Ω
Adjustment
R1 = 120 Ω
C1 = 0.1 µF
C2 = 1 µF
(see Note A)
(see Note C)
−10 V
C1 = 0.1 µF
R2
R2 = 3 kΩ
R3 =
820 Ω
1N4002
NOTES: A. Use of an input bypass capacitor is recommended if
regulator is far from the filter capacitors.
B. Output voltageǒis calculated from the equation:
Ǔ
R2
R1
VO + Vref 1 )
NOTE A: Output voltage is calculated from the equation:
where: V equals the difference between OUTPUT and
ref
R2 ) R3
ǒ1 )
Ǔ* 10 V
VO + Vref
ADJUSTMENT voltages (≈1.25 V).
C. Use of an output capacitor improves transient response,
but is optional.
R1
where: V equals the difference between OUTPUT
and ADJUSTMENT voltages (≈1.25 V).
ref
Figure 1. Adjustable Voltage Regulator
Figure 2. 0-V to 30-V Regulator Circuit
TL317
V
O
V
Input
Output
I
(see Note A)
†
D1
1N4002
R1 =
470 Ω
Adjustment
C1 =
0.1 µF
+
−
R2 =
10 kΩ
C3 = 1 µF
+
−
C2 = 10 µF
TL317
Input Output
Adjustment
1.25
R1
Ilimit
+
V
I
†
D1 discharges C2 if output is shorted to ground.
R1
NOTE A: Use of an output capacitor improves transient response, but is
optional.
Figure 3. Regulator Circuit
With Improved Ripple Rejection
Figure 4. Precision Current-Limiter Circuit
5
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
ꢀ ꢁ ꢂ ꢃꢄ
ꢂꢅ ꢀ ꢆꢇ ꢈꢉ ꢊ ꢋ ꢁ ꢋ ꢌꢍ ꢎꢏ ꢀꢋꢐ ꢁꢆ ꢇꢆ ꢑ ꢎꢁꢋꢀꢒꢇ
SLVS004G − APRIL 1979 − REVISED SEPTEMBER 2009
APPLICATION INFORMATION
R2 = 1.5 kΩ
TL317
V
O
= 15 V
V
I
Input
Output
R1 = 470 Ω
Adjustment
Adjustment
R1 =
470 Ω
V
I
Input
Output
1N4002
TL317
TL317
Input
Output
V
O
R3 = 50 kΩ
Adjustment
R3 =
C1 = 0.1 µF
C2 = 1 µF
240 Ω
R2 = 5.1 kΩ
R4 =
2 kΩ
2N2905
Output
Adjust
C1 = 25 µF
Figure 5. Tracking Preregulator Circuit
Figure 6. Slow-Turnon 15-V Regulator Circuit
TL317
V
I
Input
Output
Adjustment
240 Ω
TL317
1.1 kΩ
24 Ω
I
CHG
V
I
Input
Output
Adjustment
VBE
R +
V
BE
ICHG
V−
Figure 7. 50-mA Constant-Current
Battery-Charger Circuit
Figure 8. Current-Limited 6-V Charger
6
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
ꢀꢁ ꢂꢃ ꢄ
ꢂ ꢅꢀ ꢆꢇꢈ ꢉꢊꢋ ꢁ ꢋꢌꢍ ꢎꢏ ꢀꢋꢐꢁ ꢆ ꢇꢆꢑ ꢎ ꢁꢋꢀꢒ ꢇ
SLVS004G − APRIL 1979 − REVISED SEPTEMBER 2009
APPLICATION INFORMATION
TIP73
2N2905
500 Ω
V
I
5 kΩ
TL317
Output
Adjustment
22 Ω
Input
V
O
120 Ω
1N4002
10 µF
†
47 µF
R
L
5 kΩ
‡
10 µF
†
‡
Minimum load current is 30 mA.
Optional capacitor improves ripple rejection.
Figure 9. High-Current Adjustable Regulator
7
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
PACKAGE OPTION ADDENDUM
www.ti.com
24-Sep-2009
PACKAGING INFORMATION
Orderable Device
TL317CD
Status (1)
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
Package Package
Pins Package Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
Qty
Type
Drawing
SOIC
D
8
8
8
8
8
8
3
3
3
3
8
8
8
8
8
8
8
8
8
8
8
8
75 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
TL317CDE4
TL317CDG4
TL317CDR
SOIC
SOIC
SOIC
SOIC
SOIC
TO-92
TO-92
TO-92
TO-92
TSSOP
TSSOP
TSSOP
TSSOP
TSSOP
TSSOP
SO
D
D
75 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
75 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
D
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
TL317CDRE4
TL317CDRG4
TL317CLP
D
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
D
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
LP
LP
LP
LP
PW
PW
PW
PW
PW
PW
PS
PS
PS
PS
PS
PS
1000
1000
2000
2000
Pb-Free
(RoHS)
CU SN
CU SN
CU SN
CU SN
N / A for Pkg Type
N / A for Pkg Type
N / A for Pkg Type
N / A for Pkg Type
TL317CLPE3
TL317CLPR
TL317CLPRE3
TL317CPW
Pb-Free
(RoHS)
Pb-Free
(RoHS)
Pb-Free
(RoHS)
150 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
TL317CPWE4
TL317CPWG4
TL317CPWR
TL317CPWRE4
TL317CPWRG4
TL317PS
150 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
150 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
80 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
TL317PSE4
TL317PSG4
TL317PSR
SO
80 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SO
80 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SO
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
TL317PSRE4
TL317PSRG4
SO
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SO
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
24-Sep-2009
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com
24-Sep-2009
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
B0
K0
P1
W
Pin1
Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant
(mm) W1 (mm)
TL317CDR
TL317CPWR
TL317PSR
SOIC
TSSOP
SO
D
8
8
8
2500
2000
2000
330.0
330.0
330.0
12.4
12.4
16.4
6.4
7.0
8.2
5.2
3.6
6.6
2.1
1.6
2.5
8.0
8.0
12.0
12.0
16.0
Q1
Q1
Q1
PW
PS
12.0
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
24-Sep-2009
*All dimensions are nominal
Device
Package Type Package Drawing Pins
SPQ
Length (mm) Width (mm) Height (mm)
TL317CDR
TL317CPWR
TL317PSR
SOIC
TSSOP
SO
D
8
8
8
2500
2000
2000
340.5
346.0
346.0
338.1
346.0
346.0
20.6
29.0
33.0
PW
PS
Pack Materials-Page 2
MECHANICAL DATA
MSOT002A – OCTOBER 1994 – REVISED NOVEMBER 2001
LP (O-PBCY-W3)
PLASTIC CYLINDRICAL PACKAGE
0.205 (5,21)
0.175 (4,44)
0.165 (4,19)
0.125 (3,17)
DIA
0.210 (5,34)
0.170 (4,32)
Seating
Plane
0.157 (4,00) MAX
0.050 (1,27)
C
0.500 (12,70) MIN
0.022 (0,56)
0.016 (0,41)
0.016 (0,41)
0.014 (0,35)
0.104 (2,65)
FORMED LEAD OPTION
STRAIGHT LEAD OPTION
D
0.135 (3,43) MIN
0.105 (2,67)
0.095 (2,41)
0.055 (1,40)
0.045 (1,14)
1
2
3
0.105 (2,67)
0.080 (2,03)
0.105 (2,67)
0.080 (2,03)
4040001-2/C 10/01
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. Lead dimensions are not controlled within this area
D. FAlls within JEDEC TO -226 Variation AA (TO-226 replaces TO-92)
E. Shipping Method:
Straight lead option available in bulk pack only.
Formed lead option available in tape & reel or ammo pack.
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MECHANICAL DATA
MSOT002A – OCTOBER 1994 – REVISED NOVEMBER 2001
LP (O-PBCY-W3)
PLASTIC CYLINDRICAL PACKAGE
0.539 (13,70)
0.460 (11,70)
1.260 (32,00)
0.905 (23,00)
0.650 (16,50)
0.610 (15,50)
0.020 (0,50) MIN
0.098 (2,50)
0.384 (9,75)
0.335 (8,50)
0.748 (19,00)
0.217 (5,50)
0.748 (19,00)
0.689 (17,50)
0.433 (11,00)
0.335 (8,50)
0.114 (2,90)
0.094 (2,40)
0.114 (2,90)
0.094 (2,40)
0.169 (4,30)
0.146 (3,70)
DIA
0.266 (6,75)
0.234 (5,95)
0.512 (13,00)
0.488 (12,40)
TAPE & REEL
4040001-3/C 10/01
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. Tape and Reel information for the Format Lead Option package.
2
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MECHANICAL DATA
MTSS001C – JANUARY 1995 – REVISED FEBRUARY 1999
PW (R-PDSO-G**)
PLASTIC SMALL-OUTLINE PACKAGE
14 PINS SHOWN
0,30
0,19
M
0,10
0,65
14
8
0,15 NOM
4,50
4,30
6,60
6,20
Gage Plane
0,25
1
7
0°–8°
A
0,75
0,50
Seating Plane
0,10
0,15
0,05
1,20 MAX
PINS **
8
14
16
20
24
28
DIM
3,10
2,90
5,10
4,90
5,10
4,90
6,60
6,40
7,90
9,80
9,60
A MAX
A MIN
7,70
4040064/F 01/97
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion not to exceed 0,15.
D. Falls within JEDEC MO-153
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Applications
Audio
Amplifiers
amplifier.ti.com
dataconverter.ti.com
www.dlp.com
www.ti.com/audio
Data Converters
DLP® Products
Automotive
www.ti.com/automotive
www.ti.com/communications
Communications and
Telecom
DSP
dsp.ti.com
Computers and
Peripherals
www.ti.com/computers
Clocks and Timers
Interface
www.ti.com/clocks
interface.ti.com
logic.ti.com
Consumer Electronics
Energy
www.ti.com/consumer-apps
www.ti.com/energy
Logic
Industrial
www.ti.com/industrial
Power Mgmt
Microcontrollers
RFID
power.ti.com
Medical
www.ti.com/medical
microcontroller.ti.com
www.ti-rfid.com
Security
www.ti.com/security
Space, Avionics &
Defense
www.ti.com/space-avionics-defense
RF/IF and ZigBee® Solutions www.ti.com/lprf
Video and Imaging
Wireless
www.ti.com/video
www.ti.com/wireless-apps
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2010, Texas Instruments Incorporated
相关型号：
TL317CPWRG4
3-TERMINAL ADJUSTABLE REGULATORWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TI
TL317D
3-TERMINAL ADJUSTABLE REGULATORSWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TI
TL317LP
3-TERMINAL ADJUSTABLE REGULATORSWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TI
TL317MJG
IC,VOLT REGULATOR,ADJUSTABLE,+1.2 TO +32V,BIPOLAR,DIP,8PIN,CERAMICWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TI
TL317MJG/883B
1.2 V-32V ADJUSTABLE POSITIVE REGULATOR, CDIP8, 0.300 INCH, HERMETIC SEALED, CERAMIC, DIP-8Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TI
TL317PS
3-TERMINAL ADJUSTABLE REGULATORWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TI
TL317PSE4
3-TERMINAL ADJUSTABLE REGULATORWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TI
TL317PSG4
3-TERMINAL ADJUSTABLE REGULATORWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TI
TL317PSR
3-TERMINAL ADJUSTABLE REGULATORWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TI
TL317PSRE4
3-TERMINAL ADJUSTABLE REGULATORWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TI
TL317PSRG4
3-TERMINAL ADJUSTABLE REGULATORWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TI
TL317QDR
1.2 V-32V ADJUSTABLE POSITIVE REGULATOR, PDSO8, SO-8Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TI
©2020 ICPDF网 联系我们和版权申明