TL4050C82IDCKTQ1 [TI]
2-OUTPUT TWO TERM VOLTAGE REFERENCE, 8.192V, PDSO5, PLASTIC, SC-70, 5 PIN;型号: | TL4050C82IDCKTQ1 |
厂家: | TEXAS INSTRUMENTS |
描述: | 2-OUTPUT TWO TERM VOLTAGE REFERENCE, 8.192V, PDSO5, PLASTIC, SC-70, 5 PIN 光电二极管 输出元件 |
文件: | 总33页 (文件大小:625K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
TL4050-Q1
www.ti.com
SLOS588E –JUNE 2008–REVISED MARCH 2010
PRECISION MICROPOWER SHUNT VOLTAGE REFERENCE
Check for Samples: TL4050-Q1
1
FEATURES
•
Available in Extended Temperature Range:
–40°C to 125°C
•
Qualified for Automotive Applications
•
Fixed Output Voltages of 2.048 V, 2.5 V,
4.096 V, 5 V, 8.192 V, and 10 V
APPLICATIONS
•
•
•
•
•
•
•
•
Data-Acquisition Systems
Power Supplies and Power-Supply Monitors
Instrumentation and Test Equipment
Process Controls
Precision Audio
Automotive Electronics
•
Tight Output Tolerances and Low Temperature
Coefficient
–
–
–
Max 0.1%, 50 ppm/°C – A Grade
Max 0.2%, 50 ppm/°C – B Grade
Max 0.5%, 50 ppm/°C – C Grade
•
•
Low Output Noise: 41 mVRMS Typ
Energy Management
Battery-Powered Equipment
Wide Operating Current Range:
60 mA Typ to 15 mA
•
Stable With All Capacitive Loads; No Output
Capacitor Required
DBZ (SOT-23-3) PACKAGE
(TOP VIEW)
DCK (SC-70) PACKAGE
(TOP VIEW)
1
1
CATHODE
5
4
ANODE
NC
NC
NC
*
3
2
3
2
ANODE
CATHODE
«Pin 3 is attached to Substrate and must
be connected to ANODE or left open.
NC – No internal connection
DESCRIPTION/ORDERING INFORMATION
The TL4050 series of shunt voltage references are versatile easy-to-use references suitable for a wide array of
applications. The two-terminal fixed-output device requires no external capacitors for operation and is stable with
all capacitive loads. Additionally, the reference offers low dynamic impedance, low noise, and low temperature
coefficient to ensure a stable output voltage over a wide range of operating currents and temperatures.
The TL4050 is offered in three initial tolerances, ranging from 0.1% (max) for the A grade to 0.5% (max) for the
C grade. Thus, a great deal of flexibility is offered to designers in choosing the best cost-to-performance ratio for
their applications. Packaged in the space-saving SOT-23-3 and SC-70 packages and requiring a minimum
current of 45 mA (typ), the TL4050 also is ideal for portable applications.
The TL4050xI is characterized for operation over an ambient temperature range of –40°C to 85°C. The
TL4050xQ is characterized for operation over an ambient temperature range of –40°C to 125°C.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
UNLESS OTHERWISE NOTED this document contains
Copyright © 2008–2010, Texas Instruments Incorporated
PRODUCTION DATA information current as of publication date.
Products conform to specifications per the terms of Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
TL4050-Q1
SLOS588E –JUNE 2008–REVISED MARCH 2010
www.ti.com
ORDERING INFORMATION(1)
DEVICE
GRADE
ORDERABLE
PART NUMBER
TOP-SIDE
MARKING
TA
VKA
PACKAGE(2)
Reel of 3000
SOT-23-3 – DBZ
TL4050A20IDBZRQ1
TL4050A20IDBZTQ1
TL4050A20IDCKRQ1
TL4050A20IDCKTQ1
TL4050A25IDBZRQ1
TL4050A25IDBZTQ1
TL4050A25IDCKRQ1
TL4050A25IDCKTQ1
TL4050A41IDBZRQ1
TL4050A41IDBZTQ1
TL4050A41IDCKRQ1
TL4050A41IDCKTQ1
TL4050A50IDBZRQ1
TL4050A50IDBZTQ1
TL4050A50IDCKRQ1
TL4050A50IDCKTQ1
TL4050A82IDBZRQ1
TL4050A82IDBZTQ1
TL4050A82IDCKRQ1
TL4050A82IDCKTQ1
TL4050A10IDBZRQ1
TL4050B10IDBZTQ1
TL4050A10IDCKRQ1
TL4050B10IDCKTQ1
Product Preview
Reel of 250
2.048 V
Reel of 3000
SC-70 – DCK
Product Preview
Product Preview
Product Preview
Product Preview
Product Preview
Product Preview
Product Preview
Product Preview
Product Preview
Product Preview
Product Preview
Reel of 250
Reel of 3000
SOT-23-3 – DBZ
Reel of 250
2.5 V
4.096 V
5 V
Reel of 3000
SC-70 – DCK
Reel of 250
Reel of 3000
SOT-23-3 – DBZ
Reel of 250
A grade:
0.1% initial
accuracy and
50 ppm/°C
temperature
coefficient
Reel of 3000
SC-70 – DCK
Reel of 250
–40°C to 85°C
Reel of 3000
SOT-23-3 – DBZ
Reel of 250
Reel of 3000
SC-70 – DCK
Reel of 250
Reel of 3000
SOT-23-3 – DBZ
Reel of 250
8.192 V
10 V
Reel of 3000
SC-70 – DCK
Reel of 250
Reel of 3000
SOT-23-3 – DBZ
Reel of 250
Reel of 3000
SC-70 – DCK
Reel of 250
(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
web site at www.ti.com.
(2) Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.
2
Submit Documentation Feedback
Copyright © 2008–2010, Texas Instruments Incorporated
TL4050-Q1
www.ti.com
SLOS588E –JUNE 2008–REVISED MARCH 2010
ORDERING INFORMATION (1) (continued)
DEVICE
GRADE
ORDERABLE
PART NUMBER
TOP-SIDE
MARKING
TA
VKA
PACKAGE(2)
Reel of 3000
TL4050B20IDBZRQ1
TL4050B20IDBZTQ1
TL4050B20IDCKRQ1
TL4050B20IDCKTQ1
TL4050B25IDBZRQ1
TL4050B25IDBZTQ1
TL4050B25IDCKRQ1
TL4050B25IDCKTQ1
TL4050B41IDBZRQ1
TL4050B41IDBZTQ1
TL4050B41IDCKRQ1
TL4050B41IDCKTQ1
TL4050B50IDBZRQ1
TL4050B50IDBZTQ1
TL4050B50IDCKRQ1
TL4050B50IDCKTQ1
TL4050B82IDBZRQ1
TL4050B82IDBZTQ1
TL4050B82IDCKRQ1
TL4050B82IDCKTQ1
TL4050B10IDBZRQ1
TL4050B10IDBZTQ1
TL4050B10IDCKRQ1
TL4050B10IDCKTQ1
SOT-23-3 – DBZ
SC-70 – DCK
Product Preview
Product Preview
Product Preview
Product Preview
Product Preview
Product Preview
Product Preview
Product Preview
Product Preview
Product Preview
Product Preview
Product Preview
Reel of 250
Reel of 3000
Reel of 250
Reel of 3000
Reel of 250
Reel of 3000
Reel of 250
Reel of 3000
Reel of 250
Reel of 3000
Reel of 250
Reel of 3000
Reel of 250
Reel of 3000
Reel of 250
Reel of 3000
Reel of 250
Reel of 3000
Reel of 250
Reel of 3000
Reel of 250
Reel of 3000
Reel of 250
2.048 V
2.5 V
SOT-23-3 – DBZ
SC-70 – DCK
SOT-23-3 – DBZ
SC-70 – DCK
4.096 V
B grade:
0.2% initial
accuracy and
50 ppm/°C
temperature
coefficient
–40°C to 85°C
SOT-23-3 – DBZ
SC-70 – DCK
5 V
SOT-23-3 – DBZ
SC-70 – DCK
8.192 V
10 V
SOT-23-3 – DBZ
SC-70 – DCK
Copyright © 2008–2010, Texas Instruments Incorporated
Submit Documentation Feedback
3
TL4050-Q1
SLOS588E –JUNE 2008–REVISED MARCH 2010
www.ti.com
ORDERING INFORMATION (1) (continued)
DEVICE
GRADE
ORDERABLE
PART NUMBER
TOP-SIDE
MARKING
TA
VKA
PACKAGE(2)
Reel of 3000
TL4050C20IDBZRQ1
TL4050C20IDBZTQ1
TL4050C20IDCKRQ1
TL4050C20IDCKTQ1
TL4050C25IDBZRQ1
TL4050C25IDBZTQ1
TL4050C25IDCKRQ1
TL4050C25IDCKTQ1
TL4050C41IDBZRQ1
TL4050C41IDBZTQ1
TL4050C41IDCKRQ1
TL4050C41IDCKTQ1
TL4050C50IDBZRQ1
TL4050C50IDBZTQ1
TL4050C50IDCKRQ1
TL4050C50IDCKTQ1
TL4050C82IDBZRQ1
TL4050C82IDBZTQ1
TL4050C82IDCKRQ1
TL4050C82IDCKTQ1
TL4050C10IDBZRQ1
TL4050C10IDBZTQ1
TL4050C10IDCKRQ1
TL4050C10IDCKTQ1
TMWU
SOT-23-3 – DBZ
SC-70 – DCK
Reel of 250
Reel of 3000
Reel of 250
Reel of 3000
Reel of 250
Reel of 3000
Reel of 250
Reel of 3000
Reel of 250
Reel of 3000
Reel of 250
Reel of 3000
Reel of 250
Reel of 3000
Reel of 250
Reel of 3000
Reel of 250
Reel of 3000
Reel of 250
Reel of 3000
Reel of 250
Reel of 3000
Reel of 250
Product Preview
2.048 V
2.5 V
Product Preview
SOT-23-3 – DBZ
SC-70 – DCK
Product Preview
Product Preview
Product Preview
Product Preview
Product Preview
Product Preview
Product Preview
Product Preview
Product Preview
Product Preview
SOT-23-3 – DBZ
SC-70 – DCK
4.096 V
C grade:
0.5% initial
accuracy and
50 ppm/°C
temperature
coefficient
–40°C to 85°C
SOT-23-3 – DBZ
SC-70 – DCK
5 V
SOT-23-3 – DBZ
SC-70 – DCK
8.192 V
10 V
SOT-23-3 – DBZ
SC-70 – DCK
4
Submit Documentation Feedback
Copyright © 2008–2010, Texas Instruments Incorporated
TL4050-Q1
www.ti.com
SLOS588E –JUNE 2008–REVISED MARCH 2010
ORDERING INFORMATION(1)
DEVICE
GRADE
ORDERABLE
PART NUMBER
TOP-SIDE
MARKING
TA
VKA
PACKAGE(2)
Reel of 3000
SOT-23-3 – DBZ
TL4050A20QDBZRQ1
TL4050A20QDBZTQ1
TL4050A20QDCKRQ1
TL4050A20QDCKTQ1
TL4050A25QDBZRQ1
TL4050A25QDBZTQ1
TL4050A25QDCKRQ1
TL4050A25QDCKTQ1
TL4050A41QDBZRQ1
TL4050A41QDBZTQ1
TL4050A41QDCKRQ1
TL4050A41QDCKTQ1
TL4050A50QDBZRQ1
TL4050A50QDBZTQ1
TL4050A50QDCKRQ1
TL4050A50QDCKTQ1
TL4050A82QDBZRQ1
TL4050A82QDBZTQ1
TL4050A82QDCKRQ1
TL4050A82QDCKTQ1
TL4050A10QDBZRQ1
TL4050B10QDBZTQ1
TL4050A10QDCKRQ1
TL4050A10QDCKTQ1
Product Preview
Product Preview
Product Preview
Product Preview
Product Preview
Product Preview
Reel of 250
2.048 V
Reel of 3000
SC-70 – DCK
Reel of 250
Reel of 3000
SOT-23-3 – DBZ
Reel of 250
2.5 V
4.096 V
5 V
Reel of 3000
SC-70 – DCK
Reel of 250
Reel of 3000
SOT-23-3 – DBZ
Reel of 250
A grade:
0.1% initial
accuracy and
50 ppm/°C
temperature
coefficient
Reel of 3000
SC-70 – DCK
Reel of 250
–40°C to 125°C
Reel of 3000
SOT-23-3 – DBZ
TLGU
Reel of 250
Product Preview
7GU
Reel of 3000
SC-70 – DCK
Reel of 250
Product Preview
Reel of 3000
SOT-23-3 – DBZ
Product Preview
Product Preview
Product Preview
Product Preview
Reel of 250
8.192 V
10 V
Reel of 3000
SC-70 – DCK
Reel of 250
Reel of 3000
SOT-23-3 – DBZ
Reel of 250
Reel of 3000
SC-70 – DCK
Reel of 250
(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
web site at www.ti.com.
(2) Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.
Copyright © 2008–2010, Texas Instruments Incorporated
Submit Documentation Feedback
5
TL4050-Q1
SLOS588E –JUNE 2008–REVISED MARCH 2010
www.ti.com
ORDERING INFORMATION (1) (continued)
DEVICE
GRADE
ORDERABLE
PART NUMBER
TOP-SIDE
MARKING
TA
VKA
PACKAGE(2)
Reel of 3000
TL4050B20QDBZRQ1
TL4050B20QDBZTQ1
TL4050B20QDCKRQ1
TL4050B20QDCKTQ1
TL4050B25QDBZRQ1
TL4050B25QDBZTQ1
TL4050B25QDCKRQ1
TL4050B25QDCKTQ1
TL4050B41QDBZRQ1
TL4050B41QDBZTQ1
TL4050B41QDCKRQ1
TL4050B41QDCKTQ1
TL4050B50QDBZRQ1
TL4050B50QDBZTQ1
TL4050B50QDCKRQ1
TL4050B50QDCKTQ1
TL4050B82QDBZRQ1
TL4050B82QDBZTQ1
TL4050B82QDCKRQ1
TL4050B82QDCKTQ1
TL4050B10QDBZRQ1
TL4050B10QDBZTQ1
TL4050B10QDCKRQ1
TL4050B10QDCKTQ1
SOT-23-3 – DBZ
SC-70 – DCK
Product Preview
Reel of 250
Reel of 3000
Reel of 250
Reel of 3000
Reel of 250
Reel of 3000
Reel of 250
Reel of 3000
Reel of 250
Reel of 3000
Reel of 250
Reel of 3000
Reel of 250
Reel of 3000
Reel of 250
Reel of 3000
Reel of 250
Reel of 3000
Reel of 250
Reel of 3000
Reel of 250
Reel of 3000
Reel of 250
2.048 V
2.5 V
Product Preview
TLHU
SOT-23-3 – DBZ
SC-70 – DCK
Product Preview
7HU
Product Preview
TMXU
SOT-23-3 – DBZ
SC-70 – DCK
Product Preview
4.096 V
B grade:
0.2% initial
accuracy and
50 ppm/°C
temperature
coefficient
Product Preview
–40°C to 125°C
TLJU
SOT-23-3 – DBZ
SC-70 – DCK
Product Preview
7JU
5 V
Product Preview
SOT-23-3 – DBZ
SC-70 – DCK
Product Preview
Product Preview
Product Preview
Product Preview
8.192 V
10 V
SOT-23-3 – DBZ
SC-70 – DCK
6
Submit Documentation Feedback
Copyright © 2008–2010, Texas Instruments Incorporated
TL4050-Q1
www.ti.com
SLOS588E –JUNE 2008–REVISED MARCH 2010
ORDERING INFORMATION (1) (continued)
DEVICE
GRADE
ORDERABLE
PART NUMBER
TOP-SIDE
MARKING
TA
VKA
PACKAGE(2)
Reel of 3000
TL4050C20QDBZRQ1
TL4050C20QDBZTQ1
TL4050C20QDCKRQ1
TL4050C20QDCKTQ1
TL4050C25QDBZRQ1
TL4050C25QDBZTQ1
TL4050C25QDCKRQ1
TL4050C25QDCKTQ1
TL4050C41QDBZRQ1
TL4050C41QDBZTQ1
TL4050C41QDCKRQ1
TL4050C41QDCKTQ1
TL4050C50QDBZRQ1
TL4050C50QDBZTQ1
TL4050C50QDCKRQ1
TL4050C50QDCKTQ1
TL4050C82QDBZRQ1
TL4050C82QDBZTQ1
TL4050C82QDCKRQ1
TL4050C82QDCKTQ1
TL4050C10QDBZRQ1
TL4050C10QDBZTQ1
TL4050C10QDCKRQ1
TL4050C10QDCKTQ1
TMYU
SOT-23-3 – DBZ
SC-70 – DCK
Reel of 250
Reel of 3000
Reel of 250
Reel of 3000
Reel of 250
Reel of 3000
Reel of 250
Reel of 3000
Reel of 250
Reel of 3000
Reel of 250
Reel of 3000
Reel of 250
Reel of 3000
Reel of 250
Reel of 3000
Reel of 250
Reel of 3000
Reel of 250
Reel of 3000
Reel of 250
Reel of 3000
Reel of 250
Product Preview
2.048 V
2.5 V
Product Preview
SOT-23-3 – DBZ
SC-70 – DCK
Product Preview
Product Preview
Product Preview
Product Preview
SOT-23-3 – DBZ
SC-70 – DCK
4.096 V
C grade:
0.5% initial
accuracy and
50 ppm/°C
temperature
coefficient
–40°C to 125°C
TKZU
SOT-23-3 – DBZ
SC-70 – DCK
Product Preview
5 V
Product Preview
Product Preview
Product Preview
Product Preview
Product Preview
SOT-23-3 – DBZ
SC-70 – DCK
8.192 V
10 V
SOT-23-3 – DBZ
SC-70 – DCK
Copyright © 2008–2010, Texas Instruments Incorporated
Submit Documentation Feedback
7
TL4050-Q1
SLOS588E –JUNE 2008–REVISED MARCH 2010
www.ti.com
FUNCTIONAL BLOCK DIAGRAM
CATHODE
+
_
ANODE
ABSOLUTE MAXIMUM RATINGS(1)
over free-air temperature range (unless otherwise noted)
MIN
MAX
20
UNIT
IZ
Continuous cathode current
–10
mA
DBV package
DCK package
206
252
150
150
qJA
Package thermal impedance(2) (3)
°C/W
TJ
Operating virtual junction temperature
Storage temperature range
°C
°C
Tstg
–65
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating
Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) Maximum power dissipation is a function of TJ(max), qJA, and TA. The maximum allowable power dissipation at any allowable ambient
temperature is PD = (TJ(max) – TA)/qJA. Operating at the absolute maximum TJ of 150°C can affect reliability.
(3) The package thermal impedance is calculated in accordance with JESD 51-7.
RECOMMENDED OPERATING CONDITIONS
MIN
(1)
MAX
15
UNIT
IZ
Cathode current
mA
I temperature
Q temperature
–40
–40
85
TA
Free-air temperature
°C
125
(1) See parametric tables
8
Submit Documentation Feedback
Copyright © 2008–2010, Texas Instruments Incorporated
TL4050-Q1
www.ti.com
SLOS588E –JUNE 2008–REVISED MARCH 2010
TL4050x20I ELECTRICAL CHARACTERISTICS
at industrial temperature range, full range TA = –40°C to 85°C (unless otherwise noted)
TL4050A20I
TL4050B20I
TL4050C20I
UNIT
PARAMETER
TEST CONDITIONS
TA
MIN
TYP
MAX
MIN
TYP
MAX
MIN
TYP
MAX
Reverse
breakdown
voltage
VZ
IZ = 100 mA
25°C
25°C
2.048
2.048
2.048
V
Reverse
–2.048
2.048
–4.096
4.096
–10.24
10.24
breakdown
voltage
tolerance
ΔVZ
IZ = 100 mA
mV
Full
range
–9.0112
9.0112
–11.4688
11.4688
–14.7456
14.7456
25°C
41
60
65
41
60
65
41
60
65
Minimum
cathode
current
IZ,min
mA
Full
range
IZ = 10 mA
IZ = 1 mA
25°C
25°C
25°C
±20
±15
±15
±20
±15
±15
±20
±15
±15
Average
temperature
coefficient of
reverse
aVZ
ppm/°C
breakdown
voltage
IZ = 100 mA
Full
range
±50
0.8
1.2
6
±50
0.8
1.2
6
±50
0.8
1.2
6
25°C
0.3
2.3
0.3
2.3
0.3
2.3
Reverse
breakdown
voltage
change with
cathode
current
IZ,min < IZ < 1 mA
1 mA < IZ < 15 mA
Full
range
DVZ
DIZ
mV
25°C
Full
range
8
8
8
change
Reverse
dynamic
impedance
IZ = 1 mA,
f = 120 Hz,
IAC = 0.1 IZ
ZZ
eN
25°C
25°C
0.3
34
0.3
34
0.3
34
Ω
Wideband
noise
IZ = 100 mA,
10 Hz ≤ f ≤ 10 kHz
mVRMS
Long-term
stability of
reverse
breakdown
voltage
t = 1000 h,
TA = 25°C ± 0.1°C,
IZ = 100 mA
120
0.7
120
0.7
120
0.7
ppm
mV
Thermal
VHYST
ΔTA = –40°C to 125°C
hysteresis(1)
(1) Thermal hysteresis is defined as VZ,25°C (after cycling to –40°C) – VZ,25°C (after cycling to 125°C).
Copyright © 2008–2010, Texas Instruments Incorporated
Submit Documentation Feedback
9
TL4050-Q1
SLOS588E –JUNE 2008–REVISED MARCH 2010
www.ti.com
TL4050x20Q ELECTRICAL CHARACTERISTICS
at extended temperature range, full range TA = –40°C to 125°C (unless otherwise noted)
TL4050A20Q
TL4050B20Q
TL4050C20Q
PARAMETER
TEST CONDITIONS
TA
UNIT
MIN
TYP
MAX
MIN
TYP
MAX
MIN
TYP
MAX
Reverse
breakdown
voltage
VZ
IZ = 100 mA
25°C
25°C
2.048
2.048
2.048
V
Reverse
–2.048
2.048
–4.096
4.096
–10.24
10.24
breakdown
voltage
tolerance
ΔVZ
IZ = 100 mA
mV
Full
range
–12.288
12.288
–14.7456
14.7456
–17.2032
17.2032
25°C
41
60
65
41
60
65
41
60
65
Minimum
cathode
current
IZ,min
mA
Full
range
IZ = 10 mA
IZ = 1 mA
25°C
25°C
25°C
±20
±15
±15
±20
±15
±15
±20
±15
±15
Average
temperature
coefficient of
reverse
aVZ
ppm/°C
breakdown
voltage
IZ = 100 mA
Full
range
±50
0.8
1.2
6
±50
0.8
1.2
6
±50
0.8
1.2
6
25°C
0.3
2.3
0.3
2.3
0.3
2.3
Reverse
breakdown
voltage
change with
cathode
current
IZ,min < IZ < 1 mA
1 mA < IZ < 15 mA
Full
range
DVZ
DIZ
mV
25°C
Full
range
8
8
8
change
Reverse
dynamic
impedance
IZ = 1 mA,
f = 120 Hz,
IAC = 0.1 IZ
ZZ
eN
25°C
25°C
0.3
34
0.3
34
0.3
34
Ω
Wideband
noise
IZ = 100 mA,
10 Hz ≤ f ≤ 10 kHz
mVRMS
Long-term
stability of
reverse
breakdown
voltage
t = 1000 h,
TA = 25°C ± 0.1°C,
IZ = 100 mA
120
0.7
120
0.7
120
0.7
ppm
mV
Thermal
VHYST
ΔTA = –40°C to 125°C
hysteresis(1)
(1) Thermal hysteresis is defined as VZ,25°C (after cycling to –40°C) – VZ,25°C (after cycling to 125°C).
10
Submit Documentation Feedback
Copyright © 2008–2010, Texas Instruments Incorporated
TL4050-Q1
www.ti.com
SLOS588E –JUNE 2008–REVISED MARCH 2010
TL4050x25I ELECTRICAL CHARACTERISTICS
at industrial temperature range, full range TA = –40°C to 85°C (unless otherwise noted)
TL4050A25I
TL4050B25I
TL4050C25I
PARAMETER
TEST CONDITIONS
TA
UNIT
MIN
TYP
MAX
MIN
TYP
MAX
MIN
TYP
MAX
Reverse
breakdown
voltage
VZ
IZ = 100 mA
25°C
25°C
2.5
2.5
2.5
V
–2.5
–11
2.5
11
60
65
–5
5
14
60
65
–13
–21
13
21
60
65
Reverse
breakdown
voltage tolerance
ΔVZ
IZ = 100 mA
mV
Full
range
–14
25°C
41
41
41
Minimum
cathode current
IZ,min
mA
Full
range
IZ = 10 mA
IZ = 1 mA
25°C
25°C
25°C
±20
±15
±15
±20
±15
±15
±20
±15
±15
Average
temperature
coefficient of
reverse
aVZ
ppm/°C
breakdown
voltage
IZ = 100 mA
Full
range
±50
0.8
1.2
6
±50
0.8
1.2
6
±50
0.8
1.2
6
25°C
0.3
2.3
0.3
2.3
0.3
2.3
IZ,min < IZ < 1 mA
1 mA < IZ < 15 mA
Reverse
breakdown
voltage change
with cathode
current change
Full
range
DVZ
DIZ
mV
25°C
Full
range
8
8
8
IZ = 1 mA,
f = 120 Hz,
IAC = 0.1 IZ
Reverse dynamic
impedance
ZZ
eN
25°C
25°C
0.3
41
0.3
41
0.3
41
Ω
IZ = 100 mA,
10 Hz ≤ f ≤ 10 kHz
Wideband noise
mVRMS
Long-term
stability of
reverse
breakdown
voltage
t = 1000 h,
TA = 25°C ± 0.1°C,
IZ = 100 mA
120
120
120
0.7
ppm
mV
Thermal
VHYST
ΔTA = –40°C to 125°C
0.7
0.7
hysteresis(1)
(1) Thermal hysteresis is defined as VZ,25°C (after cycling to –40°C) – VZ,25°C (after cycling to 125°C).
Copyright © 2008–2010, Texas Instruments Incorporated
Submit Documentation Feedback
11
TL4050-Q1
SLOS588E –JUNE 2008–REVISED MARCH 2010
www.ti.com
TL4050x25Q ELECTRICAL CHARACTERISTICS
at extended temperature range, full range TA = –40°C to 125°C (unless otherwise noted)
TL4050A25Q
TL4050B25Q
TL4050C25Q
PARAMETER
TEST CONDITIONS
TA
UNIT
MIN
TYP
MAX
MIN
TYP
MAX
MIN
TYP
MAX
Reverse
breakdown
voltage
VZ
IZ = 100 mA
25°C
25°C
2.5
2.5
2.5
V
–2.5
–15
2.5
15
60
65
–5
5
18
60
65
–13
–25
13
25
60
65
Reverse
breakdown
voltage tolerance
ΔVZ
IZ = 100 mA
mV
Full
range
–18
25°C
41
41
41
Minimum
cathode current
IZ,min
mA
Full
range
IZ = 10 mA
IZ = 1 mA
25°C
25°C
25°C
±20
±15
±15
±20
±15
±15
±20
±15
±15
Average
temperature
coefficient of
reverse
aVZ
ppm/°C
breakdown
voltage
IZ = 100 mA
Full
range
±50
0.8
1.2
6
±50
0.8
1.2
6
±50
0.8
1.2
6
25°C
0.3
2.3
0.3
2.3
0.3
2.3
IZ,min < IZ < 1 mA
1 mA < IZ < 15 mA
Reverse
breakdown
voltage change
with cathode
current change
Full
range
DVZ
DIZ
mV
25°C
Full
range
8
8
8
IZ = 1 mA,
f = 120 Hz,
IAC = 0.1 IZ
Reverse dynamic
impedance
ZZ
eN
25°C
25°C
0.3
41
0.3
41
0.3
41
Ω
IZ = 100 mA,
10 Hz ≤ f ≤ 10 kHz
Wideband noise
mVRMS
Long-term
stability of
reverse
breakdown
voltage
t = 1000 h,
TA = 25°C ± 0.1°C,
IZ = 100 mA
120
120
120
0.7
ppm
mV
Thermal
VHYST
ΔTA = –40°C to 125°C
0.7
0.7
hysteresis(1)
(1) Thermal hysteresis is defined as VZ,25°C (after cycling to –40°C) – VZ,25°C (after cycling to 125°C).
12
Submit Documentation Feedback
Copyright © 2008–2010, Texas Instruments Incorporated
TL4050-Q1
www.ti.com
SLOS588E –JUNE 2008–REVISED MARCH 2010
TL4050x41I ELECTRICAL CHARACTERISTICS
at industrial temperature range, full range TA = –40°C to 85°C (unless otherwise noted)
TL4050A41I
TL4050B41I
TL4050C41I
PARAMETER
TEST CONDITIONS
TA
UNIT
MIN
TYP
MAX
MIN
TYP
MAX
MIN
TYP
MAX
Reverse
breakdown
voltage
VZ
IZ = 100 mA
25°C
25°C
4.096
4.096
4.096
V
–4.1
–18
4.1
18
68
73
–8.2
–22
8.2
22
68
73
–21
–34
21
34
68
73
Reverse
breakdown
voltage tolerance
ΔVZ
IZ = 100 mA
mV
Full
range
25°C
52
52
52
Minimum
cathode current
IZ,min
mA
Full
range
IZ = 10 mA
IZ = 1 mA
25°C
25°C
25°C
±30
±20
±20
±30
±20
±20
±30
±20
±20
Average
temperature
coefficient of
reverse
aVZ
ppm/°C
breakdown
voltage
IZ = 100 mA
Full
range
±50
0.9
1.2
7
±50
0.9
1.2
7
±50
0.9
1.2
7
25°C
0.2
2
0.2
2
0.2
2
IZ,min < IZ < 1 mA
1 mA < IZ < 15 mA
Reverse
breakdown
voltage change
with cathode
current change
Full
range
DVZ
DIZ
mV
25°C
Full
range
10
10
10
IZ = 1 mA,
f = 120 Hz,
IAC = 0.1 IZ
Reverse dynamic
impedance
ZZ
eN
25°C
25°C
0.5
93
0.5
93
0.5
93
Ω
IZ = 100 mA,
10 Hz ≤ f ≤ 10 kHz
Wideband noise
mVRMS
Long-term
stability of
reverse
breakdown
voltage
t = 1000 h,
TA = 25°C ± 0.1°C,
IZ = 100 mA
120
120
120
ppm
mV
Thermal
VHYST
ΔTA = –40°C to 125°C
1.148
1.148
1.148
hysteresis(1)
(1) Thermal hysteresis is defined as VZ,25°C (after cycling to –40°C) – VZ,25°C (after cycling to 125°C).
Copyright © 2008–2010, Texas Instruments Incorporated
Submit Documentation Feedback
13
TL4050-Q1
SLOS588E –JUNE 2008–REVISED MARCH 2010
www.ti.com
TL4050x41Q ELECTRICAL CHARACTERISTICS
at extended temperature range, full range TA = –40°C to 125°C (unless otherwise noted)
TL4050A41Q
TL4050B41Q
TL4050C41Q
PARAMETER
TEST CONDITIONS
TA
UNIT
MIN
TYP
MAX
MIN
TYP
MAX
MIN
TYP
MAX
Reverse
breakdown
voltage
VZ
IZ = 100 mA
25°C
25°C
4.096
4.096
4.096
V
–4.1
–25
4.1
25
68
78
–8.2
–29
8.2
29
68
78
–21
–41
21
41
68
78
Reverse
breakdown
voltage tolerance
ΔVZ
IZ = 100 mA
mV
Full
range
25°C
52
52
52
Minimum
cathode current
IZ,min
mA
Full
range
IZ = 10 mA
IZ = 1 mA
25°C
25°C
25°C
±30
±20
±20
±30
±20
±20
±30
±20
±20
Average
temperature
coefficient of
reverse
aVZ
ppm/°C
breakdown
voltage
IZ = 100 mA
Full
range
±50
0.9
1.2
7
±50
0.9
1.2
7
±50
0.9
1.2
7
25°C
0.2
2
0.2
2
0.2
2
IZ,min < IZ < 1 mA
1 mA < IZ < 15 mA
Reverse
breakdown
voltage change
with cathode
current change
Full
range
DVZ
DIZ
mV
25°C
Full
range
10
10
10
IZ = 1 mA,
f = 120 Hz,
IAC = 0.1 IZ
Reverse dynamic
impedance
ZZ
eN
25°C
25°C
0.5
93
0.5
93
0.5
93
Ω
IZ = 100 mA,
10 Hz ≤ f ≤ 10 kHz
Wideband noise
mVRMS
Long-term
stability of
reverse
breakdown
voltage
t = 1000 h,
TA = 25°C ± 0.1°C,
IZ = 100 mA
120
120
120
ppm
mV
Thermal
VHYST
ΔTA = –40°C to 125°C
1.148
1.148
1.148
hysteresis(1)
(1) Thermal hysteresis is defined as VZ,25°C (after cycling to –40°C) – VZ,25°C (after cycling to 125°C).
14
Submit Documentation Feedback
Copyright © 2008–2010, Texas Instruments Incorporated
TL4050-Q1
www.ti.com
SLOS588E –JUNE 2008–REVISED MARCH 2010
TL4050x50I ELECTRICAL CHARACTERISTICS
at industrial temperature range, full range TA = –40°C to 85°C (unless otherwise noted)
TL4050A50I
TL4050B50I
TL4050C50I
PARAMETER
TEST CONDITIONS
TA
UNIT
MIN
TYP
MAX
MIN
TYP
MAX
MIN
TYP
MAX
Reverse
breakdown
voltage
VZ
IZ = 100 mA
25°C
25°C
5
5
5
V
–5
5
22
74
80
–10
–27
10
27
74
80
–25
–42
25
42
74
80
Reverse
breakdown
voltage tolerance
ΔVZ
IZ = 100 mA
mV
Full
range
–22
25°C
56
56
56
Minimum
cathode current
IZ,min
mA
Full
range
IZ = 10 mA
IZ = 1 mA
25°C
25°C
25°C
±30
±20
±20
±30
±20
±20
±30
±20
±20
Average
temperature
coefficient of
reverse
aVZ
ppm/°C
breakdown
voltage
IZ = 100 mA
Full
range
±50
1
±50
1
±50
1
25°C
0.2
2
0.2
2
0.2
2
IZ,min < IZ < 1 mA
1 mA < IZ < 15 mA
Reverse
breakdown
voltage change
with cathode
current change
Full
range
1.4
8
1.4
8
1.4
8
DVZ
DIZ
mV
25°C
Full
range
12
12
12
IZ = 1 mA,
f = 120 Hz,
IAC = 0.1 IZ
Reverse dynamic
impedance
ZZ
eN
25°C
25°C
0.5
93
0.5
93
0.5
93
Ω
IZ = 100 mA,
10 Hz ≤ f ≤ 10 kHz
Wideband noise
mVRMS
Long-term
stability of
reverse
breakdown
voltage
t = 1000 h,
TA = 25°C ± 0.1°C,
IZ = 100 mA
120
120
120
1.4
ppm
mV
Thermal
VHYST
ΔTA = –40°C to 125°C
1.4
1.4
hysteresis(1)
(1) Thermal hysteresis is defined as VZ,25°C (after cycling to –40°C) – VZ,25°C (after cycling to 125°C).
Copyright © 2008–2010, Texas Instruments Incorporated
Submit Documentation Feedback
15
TL4050-Q1
SLOS588E –JUNE 2008–REVISED MARCH 2010
www.ti.com
TL4050x50Q ELECTRICAL CHARACTERISTICS
at extended temperature range, full range TA = –40°C to 125°C (unless otherwise noted)
TL4050A50Q
TL4050B50Q
TL4050C50Q
PARAMETER
TEST CONDITIONS
TA
UNIT
MIN
TYP
MAX
MIN
TYP
MAX
MIN
TYP
MAX
Reverse
breakdown
voltage
VZ
IZ = 100 mA
25°C
25°C
5
5
5
V
–5
5
30
74
90
–10
–35
10
35
74
90
–25
–50
25
50
74
90
Reverse
breakdown
voltage tolerance
ΔVZ
IZ = 100 mA
mV
Full
range
–30
25°C
56
56
56
Minimum
cathode current
IZ,min
mA
Full
range
IZ = 10 mA
IZ = 1 mA
25°C
25°C
25°C
±30
±20
±20
±30
±20
±20
±30
±20
±20
Average
temperature
coefficient of
reverse
aVZ
ppm/°C
breakdown
voltage
IZ = 100 mA
Full
range
±50
1
±50
1
±50
1
25°C
0.2
2
0.2
2
0.2
2
IZ,min < IZ < 1 mA
1 mA < IZ < 15 mA
Reverse
breakdown
voltage change
with cathode
current change
Full
range
1.4
8
1.4
8
1.4
8
DVZ
DIZ
mV
25°C
Full
range
12
12
12
IZ = 1 mA,
f = 120 Hz,
IAC = 0.1 IZ
Reverse dynamic
impedance
ZZ
eN
25°C
25°C
0.5
93
0.5
93
0.5
93
Ω
IZ = 100 mA,
10 Hz ≤ f ≤ 10 kHz
Wideband noise
mVRMS
Long-term
stability of
reverse
breakdown
voltage
t = 1000 h,
TA = 25°C ± 0.1°C,
IZ = 100 mA
120
120
120
1.4
ppm
mV
Thermal
VHYST
ΔTA = –40°C to 125°C
1.4
1.4
hysteresis(1)
(1) Thermal hysteresis is defined as VZ,25°C (after cycling to –40°C) – VZ,25°C (after cycling to 125°C).
16
Submit Documentation Feedback
Copyright © 2008–2010, Texas Instruments Incorporated
TL4050-Q1
www.ti.com
SLOS588E –JUNE 2008–REVISED MARCH 2010
TL4050x82I ELECTRICAL CHARACTERISTICS
at industrial temperature range, full range TA = –40°C to 85°C (unless otherwise noted)
TL4050A82I
TL4050B82I
TL4050C82I
PARAMETER
TEST CONDITIONS
TA
UNIT
MIN
TYP
MAX
MIN
TYP
MAX
MIN
TYP
MAX
Reverse
breakdown
voltage
VZ
IZ = 100 mA
25°C
25°C
8.192
8.192
8.192
V
–8.2
–35
8.2
35
91
95
–16
–43
16
43
91
95
–41
–68
41
68
91
95
Reverse
breakdown
voltage tolerance
ΔVZ
IZ = 100 mA
mV
Full
range
25°C
74
74
74
Minimum
cathode current
IZ,min
mA
Full
range
IZ = 10 mA
IZ = 1 mA
25°C
25°C
25°C
±40
±20
±20
±40
±20
±20
±40
±20
±20
Average
temperature
coefficient of
reverse
aVZ
ppm/°C
breakdown
voltage
IZ = 100 mA
Full
range
±50
1.3
2.5
10
±50
1.3
2.5
10
±50
1.3
2.5
10
25°C
0.6
7
0.6
7
0.6
7
IZ,min < IZ < 1 mA
1 mA < IZ < 15 mA
Reverse
breakdown
voltage change
with cathode
current change
Full
range
DVZ
DIZ
mV
25°C
Full
range
18
18
18
IZ = 1 mA,
f = 120 Hz,
IAC = 0.1 IZ
Reverse dynamic
impedance
ZZ
eN
25°C
25°C
0.6
0.6
0.6
Ω
IZ = 100 mA,
10 Hz ≤ f ≤ 10 kHz
Wideband noise
150
150
150
mVRMS
Long-term
stability of
reverse
breakdown
voltage
t = 1000 h,
TA = 25°C ± 0.1°C,
IZ = 100 mA
120
120
120
2.3
ppm
mV
Thermal
VHYST
ΔTA = –40°C to 125°C
2.3
2.3
hysteresis(1)
(1) Thermal hysteresis is defined as VZ,25°C (after cycling to –40°C) – VZ,25°C (after cycling to 125°C).
Copyright © 2008–2010, Texas Instruments Incorporated
Submit Documentation Feedback
17
TL4050-Q1
SLOS588E –JUNE 2008–REVISED MARCH 2010
www.ti.com
TL4050x82Q ELECTRICAL CHARACTERISTICS
at extended temperature range, full range TA = –40°C to 125°C (unless otherwise noted)
TL4050A82Q
TL4050B82Q
TL4050C82Q
PARAMETER
TEST CONDITIONS
TA
UNIT
MIN
TYP
MAX
MIN
TYP
MAX
MIN
TYP
MAX
Reverse
breakdown
voltage
VZ
IZ = 100 mA
25°C
25°C
8.192
8.192
8.192
V
–8.2
–49
8.2
49
–16
–57
16
57
–41
–82
41
82
Reverse
breakdown
voltage tolerance
ΔVZ
IZ = 100 mA
mV
Full
range
25°C
74
91
74
91
74
91
Minimum
cathode current
IZ,min
mA
Full
range
100
100
100
IZ = 10 mA
IZ = 1 mA
25°C
25°C
25°C
±40
±20
±20
±40
±20
±20
±40
±20
±20
Average
temperature
coefficient of
reverse
aVZ
ppm/°C
breakdown
voltage
IZ = 100 mA
Full
range
±50
1.3
2.5
10
±50
1.3
2.5
10
±50
1.3
2.5
10
25°C
0.6
7
0.6
7
0.6
7
IZ,min < IZ < 1 mA
1 mA < IZ < 15 mA
Reverse
breakdown
voltage change
with cathode
current change
Full
range
DVZ
DIZ
mV
25°C
Full
range
18
18
18
IZ = 1 mA,
f = 120 Hz,
IAC = 0.1 IZ
Reverse dynamic
impedance
ZZ
eN
25°C
25°C
0.6
0.6
0.6
Ω
IZ = 100 mA,
10 Hz ≤ f ≤ 10 kHz
Wideband noise
150
150
150
mVRMS
Long-term
stability of
reverse
breakdown
voltage
t = 1000 h,
TA = 25°C ± 0.1°C,
IZ = 100 mA
120
120
120
2.3
ppm
mV
Thermal
VHYST
ΔTA = –40°C to 125°C
2.3
2.3
hysteresis(1)
(1) Thermal hysteresis is defined as VZ,25°C (after cycling to –40°C) – VZ,25°C (after cycling to 125°C).
18
Submit Documentation Feedback
Copyright © 2008–2010, Texas Instruments Incorporated
TL4050-Q1
www.ti.com
SLOS588E –JUNE 2008–REVISED MARCH 2010
TL4050x10I ELECTRICAL CHARACTERISTICS
at industrial temperature range, full range TA = –40°C to 85°C (unless otherwise noted)
TL4050A10I
TL4050B10I
TL4050C10I
PARAMETER
TEST CONDITIONS
TA
UNIT
MIN
TYP
MAX
MIN
TYP
MAX
MIN
TYP
MAX
Reverse
breakdown
voltage
VZ
IZ = 100 mA
25°C
25°C
10
10
10
V
–10
–43
10
43
–20
–53
20
53
–50
–83
50
83
Reverse
breakdown
voltage tolerance
ΔVZ
IZ = 100 mA
mV
Full
range
25°C
80
100
103
80
100
103
80
100
103
Minimum
cathode current
IZ,min
mA
Full
range
IZ = 10 mA
IZ = 1 mA
25°C
25°C
25°C
±40
±20
±20
±40
±20
±20
±40
±20
±20
Average
temperature
coefficient of
reverse
aVZ
ppm/°C
breakdown
voltage
IZ = 100 mA
Full
range
±50
1.5
3.5
12
±50
1.5
3.5
12
±50
1.5
3.5
12
25°C
0.8
8
0.8
8
0.8
8
IZ,min < IZ < 1 mA
1 mA < IZ < 15 mA
Reverse
breakdown
voltage change
with cathode
current change
Full
range
DVZ
DIZ
mV
25°C
Full
range
23
23
23
IZ = 1 mA,
f = 120 Hz,
IAC = 0.1 IZ
Reverse dynamic
impedance
ZZ
eN
25°C
25°C
0.7
0.7
0.7
Ω
IZ = 100 mA,
10 Hz ≤ f ≤ 10 kHz
Wideband noise
150
150
150
mVRMS
Long-term
stability of
reverse
breakdown
voltage
t = 1000 h,
TA = 25°C ± 0.1°C,
IZ = 100 mA
120
120
120
2.8
ppm
mV
Thermal
VHYST
ΔTA = –40°C to 125°C
2.8
2.8
hysteresis(1)
(1) Thermal hysteresis is defined as VZ,25°C (after cycling to –40°C) – VZ,25°C (after cycling to 125°C).
Copyright © 2008–2010, Texas Instruments Incorporated
Submit Documentation Feedback
19
TL4050-Q1
SLOS588E –JUNE 2008–REVISED MARCH 2010
www.ti.com
TL4050x10Q ELECTRICAL CHARACTERISTICS
at extended temperature range, full range TA = –40°C to 125°C (unless otherwise noted)
TL4050A10Q
TL4050B10Q
TL4050C10Q
PARAMETER
TEST CONDITIONS
TA
UNIT
MIN
TYP
MAX
MIN
TYP
MAX
MIN
TYP
MAX
Reverse
breakdown
voltage
VZ
IZ = 100 mA
25°C
25°C
10
10
10
V
–10
–60
10
60
–20
–70
20
70
–50
50
100
100
110
Reverse
breakdown
voltage tolerance
ΔVZ
IZ = 100 mA
mV
Full
range
–100
25°C
80
100
110
80
100
110
80
Minimum
cathode current
IZ,min
mA
Full
range
IZ = 10 mA
IZ = 1 mA
25°C
25°C
25°C
±40
±20
±20
±40
±20
±20
±40
±20
±20
Average
temperature
coefficient of
reverse
aVZ
ppm/°C
breakdown
voltage
IZ = 100 mA
Full
range
±50
1.5
3.5
12
±50
1.5
3.5
12
±50
1.5
3.5
12
25°C
0.8
8
0.8
8
0.8
8
IZ,min < IZ < 1 mA
1 mA < IZ < 15 mA
Reverse
breakdown
voltage change
with cathode
current change
Full
range
DVZ
DIZ
mV
25°C
Full
range
23
23
23
IZ = 1 mA,
f = 120 Hz,
IAC = 0.1 IZ
Reverse dynamic
impedance
ZZ
eN
25°C
25°C
0.7
0.7
0.7
Ω
IZ = 100 mA,
10 Hz ≤ f ≤ 10 kHz
Wideband noise
150
150
150
mVRMS
Long-term
stability of
reverse
breakdown
voltage
t = 1000 h,
TA = 25°C ± 0.1°C,
IZ = 100 mA
120
120
120
2.8
ppm
mV
Thermal
VHYST
ΔTA = –40°C to 125°C
2.8
2.8
hysteresis(1)
(1) Thermal hysteresis is defined as VZ,25°C (after cycling to –40°C) – VZ,25°C (after cycling to 125°C).
20
Submit Documentation Feedback
Copyright © 2008–2010, Texas Instruments Incorporated
TL4050-Q1
www.ti.com
SLOS588E –JUNE 2008–REVISED MARCH 2010
TYPICAL CHARACTERISTICS
OUTPUT IMPEDANCE
vs
OUTPUT IMPEDANCE
vs
FREQUENCY
FREQUENCY
1000
100
10
1000
100
10
IZ = IZ(MIN) + 100 µA
IZ = 1 mA
VKA = 10 V
VKA = 10 V
VKA = 2.5 V
1
1
VKA = 2.5 V
0.1
0.1
100
1k
10k
100k
1M
100
1k
10k
Frequency – Hz
100k
1M
Frequency – Hz
REVERSE CHARACTERISTICS
AND
NOISE VOLTAGE
vs
MINIMUM OPERATING CURRENT
FREQUENCY
100
80
60
40
20
0
10
8
VKA = 2.5 V
VKA = 10 V
6
4
VKA = 10 V
2
VKA = 2.5 V
0
1
10
100
1k
10k
100k
0
1
2
3
4
5
6
7
8
9
10
Frequency – Hz
Reverse Voltage (V)
Copyright © 2008–2010, Texas Instruments Incorporated
Submit Documentation Feedback
21
TL4050-Q1
SLOS588E –JUNE 2008–REVISED MARCH 2010
www.ti.com
TYPICAL CHARACTERISTICS (continued)
LARGE SIGNAL PULSE RESPONSE
LARGE SIGNAL PULSE RESPONSE
6
5
20
15
10
5
VKA = 2.5 V
VKA = 10 V
4
3
2
1
0
0
-1
-5
-20
0
20
40
60
80
-100
0
100
200
300
400
Time – µs
Time – µs
22
Submit Documentation Feedback
Copyright © 2008–2010, Texas Instruments Incorporated
TL4050-Q1
www.ti.com
SLOS588E –JUNE 2008–REVISED MARCH 2010
APPLICATION INFORMATION
R
S
V
IN
TL4050
V
Z
1-Hz Rate
Figure 1. Start-Up Test Circuit
Output Capacitor
The TL4050 does not require an output capacitor across cathode and anode for stability. However, if an output
bypass capacitor is desired, the TL4050 is designed to be stable with all capacitive loads.
SOT-23 Pin Connections
There is a parasitic Schottky diode connected between pins 2 and 3 of the SOT-23 packaged device. Thus, pin 3
of the SOT-23 package must be left floating or connected to pin 2.
Use With ADCs or DACs
The TL4050x-41 is designed to be a cost-effective voltage reference as required in 12-bit data-acquisition
systems. For 12-bit systems operating from 5-V supplies, such as the ADS7842 (see Figure 2), the TL4050x-41
(4.096 V) permits operation with an LSB of 1 mV.
ADS7842
0 V to V
REF
V
1 AIN0
2 AIN1
3 AIN2
4 AIN3
28
27
5-V Analog Supply
ANA
+
+
5 V
0.1 µF
10 µF
V
DIG
A1 26
A0 25
909
3.2-MHz Clock
BUSY Output
Write Input
V
5
6
7
8
9
CLK 24
REF
+
2.2 µF
AGND
DB11
DB10
23
22
21
BUSY
WR
TL4050A-41
CS
DB9
RD 20
DB0 19
DB1 18
Read Input
10 DB8
11 DB7
12 DB6
13 DB5
14 DGND
DB2 17
DB3 16
DB4 15
Figure 2. Data-Acquisition Circuit With TL4050x-41
Copyright © 2008–2010, Texas Instruments Incorporated
Submit Documentation Feedback
23
TL4050-Q1
SLOS588E –JUNE 2008–REVISED MARCH 2010
www.ti.com
Cathode and Load Currents
In a typical shunt-regulator configuration (see Figure 3), an external resistor, RS, is connected between the
supply and the cathode of the TL4050. RS must be set properly, as it sets the total current available to supply the
load (IL) and bias the TL4050 (IZ). In all cases, IZ must stay within a specified range for proper operation of the
reference. Taking into consideration one extreme in the variation of the load and supply voltage (maximum IL and
minimum VS), RS must be small enough to supply the minimum IZ required for operation of the regulator, as
given by data-sheet parameters. At the other extreme, maximum VS and minimum IL, RS must be large enough
to limit IZ to less than its maximum-rated value of 15 mA.
RS is calculated according to Equation 1:
ǒ
Ǔ
VS * VZ
RS +
(
)
IL ) IZ
(1)
V
S
R
S
I + I
Z L
I
L
V
Z
I
Z
TL4050
Figure 3. Shunt Regulator
24
Submit Documentation Feedback
Copyright © 2008–2010, Texas Instruments Incorporated
PACKAGE OPTION ADDENDUM
www.ti.com
15-Jul-2010
PACKAGING INFORMATION
Status (1)
Eco Plan (2)
MSL Peak Temp (3)
Samples
Orderable Device
Package Type Package
Drawing
Pins
Package Qty
Lead/
Ball Finish
(Requires Login)
TL4050A50QDBZRQ1
TL4050A50QDCKRQ1
TL4050B25QDBZRQ1
TL4050B25QDCKRQ1
TL4050B41QDBZRQ1
TL4050B50QDBZRQ1
TL4050B50QDCKRQ1
TL4050C20QDBZRQ1
TL4050C50QDBZRQ1
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
SOT-23
SC70
DBZ
DCK
DBZ
DCK
DBZ
DBZ
DCK
DBZ
DBZ
3
5
3
5
3
3
5
3
3
3000
3000
3000
3000
3000
3000
3000
3000
3000
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
Request Free Samples
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
CU NIPDAU Level-1-260C-UNLIM
CU NIPDAU Level-1-260C-UNLIM
CU NIPDAU Level-1-260C-UNLIM
CU NIPDAU Level-1-260C-UNLIM
CU NIPDAU Level-1-260C-UNLIM
CU NIPDAU Level-1-260C-UNLIM
CU NIPDAU Level-1-260C-UNLIM
Request Free Samples
Purchase Samples
SOT-23
SC70
Green (RoHS
& no Sb/Br)
Green (RoHS
& no Sb/Br)
Purchase Samples
SOT-23
SOT-23
SC70
Green (RoHS
& no Sb/Br)
Request Free Samples
Purchase Samples
Green (RoHS
& no Sb/Br)
Green (RoHS
& no Sb/Br)
Purchase Samples
SOT-23
SOT-23
Green (RoHS
& no Sb/Br)
Request Free Samples
Request Free Samples
Green (RoHS
& no Sb/Br)
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
15-Jul-2010
(3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
OTHER QUALIFIED VERSIONS OF TL4050A50-Q1, TL4050B25-Q1, TL4050B41-Q1, TL4050B50-Q1, TL4050C50-Q1 :
Catalog: TL4050A50, TL4050B25, TL4050B41, TL4050B50, TL4050C50
•
NOTE: Qualified Version Definitions:
Catalog - TI's standard catalog product
•
Addendum-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com
20-Jul-2010
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
B0
K0
P1
W
Pin1
Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant
(mm) W1 (mm)
TL4050A50QDBZRQ1
TL4050A50QDCKRQ1
TL4050B25QDBZRQ1
TL4050B25QDCKRQ1
TL4050B50QDBZRQ1
TL4050B50QDCKRQ1
SOT-23
SC70
DBZ
DCK
DBZ
DCK
DBZ
DCK
3
5
3
5
3
5
3000
3000
3000
3000
3000
3000
179.0
179.0
179.0
179.0
179.0
179.0
8.4
8.4
8.4
8.4
8.4
8.4
3.15
2.2
2.95
2.5
1.22
1.2
4.0
4.0
4.0
4.0
4.0
4.0
8.0
8.0
8.0
8.0
8.0
8.0
Q3
Q3
Q3
Q3
Q3
Q3
SOT-23
SC70
3.15
2.2
2.95
2.5
1.22
1.2
SOT-23
SC70
3.15
2.2
2.95
2.5
1.22
1.2
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
20-Jul-2010
*All dimensions are nominal
Device
Package Type Package Drawing Pins
SPQ
Length (mm) Width (mm) Height (mm)
TL4050A50QDBZRQ1
TL4050A50QDCKRQ1
TL4050B25QDBZRQ1
TL4050B25QDCKRQ1
TL4050B50QDBZRQ1
TL4050B50QDCKRQ1
SOT-23
SC70
DBZ
DCK
DBZ
DCK
DBZ
DCK
3
5
3
5
3
5
3000
3000
3000
3000
3000
3000
203.0
203.0
203.0
203.0
203.0
203.0
203.0
203.0
203.0
203.0
203.0
203.0
35.0
35.0
35.0
35.0
35.0
35.0
SOT-23
SC70
SOT-23
SC70
Pack Materials-Page 2
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Applications
Audio
www.ti.com/audio
amplifier.ti.com
dataconverter.ti.com
www.dlp.com
Communications and Telecom www.ti.com/communications
Amplifiers
Data Converters
DLP® Products
DSP
Computers and Peripherals
Consumer Electronics
Energy and Lighting
Industrial
www.ti.com/computers
www.ti.com/consumer-apps
www.ti.com/energy
dsp.ti.com
www.ti.com/industrial
www.ti.com/medical
www.ti.com/security
Clocks and Timers
Interface
www.ti.com/clocks
interface.ti.com
logic.ti.com
Medical
Security
Logic
Space, Avionics and Defense www.ti.com/space-avionics-defense
Power Mgmt
power.ti.com
Transportation and
Automotive
www.ti.com/automotive
Microcontrollers
RFID
microcontroller.ti.com
www.ti-rfid.com
Video and Imaging
Wireless
www.ti.com/video
www.ti.com/wireless-apps
RF/IF and ZigBee® Solutions www.ti.com/lprf
TI E2E Community Home Page
e2e.ti.com
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2011, Texas Instruments Incorporated
相关型号:
©2020 ICPDF网 联系我们和版权申明