TLV3401IDBV [TI]
FAMILY OF NANOPOWER OPEN DRAIN OUTPUT COMPARATORS; 家庭的纳安级开漏输出比较
| 型号： | TLV3401IDBV |
| 厂家： | 
TEXAS INSTRUMENTS |
| 描述： | FAMILY OF NANOPOWER OPEN DRAIN OUTPUT COMPARATORS |
| 文件： | 总14页 (文件大小：259K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
TLV3401, TLV3402, TLV3404
FAMILY OF NANOPOWER OPEN DRAIN OUTPUT COMPARATORS
SLCS135A – AUGUST 2000 – REVISED NOVEMBER 2000
Low Supply Current . . . 470 nA/Per Channel
Input Common-Mode Range Exceeds the
Rails . . . –0.1 V to V + 5 V
CC
Supply Voltage Range . . . 2.5 V to 16 V
Reverse Battery Protection Up to 18 V
Open Drain CMOS Output Stage
SUPPLY CURRENT
vs
Specified Temperature Range
– 0°C to 70°C – Commercial Grade
– –40°C to 125°C – Industrial Grade
SUPPLY VOLTAGE
700
600
500
400
300
200
100
0
T
= 125°C
A
Ultrasmall Packaging
– 5-Pin SOT-23 (TLV3401)
– 8-Pin MSOP (TLV3402)
T
= 70°C
= 25°C
A
T
A
Universal Op-Amp EVM (Reference
SLOU060 for more information)
T
A
= 0°C
T
A
= –40°C
description
The TLV340x is Texas Instruments’ first family of
nanopower comparators with only 470 nA per
channel supply current, which make this device
ideal for battery power and wireless handset
applications.
V
= –1 V
ID
10 12 14
– Supply Voltage – V
2
4
6
8
0
16
V
CC
high side voltage sense circuit
The TLV340x has a minimum operating supply
voltage of 2.7 V over the extended industrial
temperature range (T = –40°C to 125°C), while
having an input common-mode range of –0.1 to
A
R4
1 MΩ
R1
1 MΩ
R3
100 kΩ
V
+5V.Thelowsupplycurrentmakesitanideal
CC
+
V
CC
choice for battery powered portable applications
where quiescent current is the primary concern.
Reverse battery protection guards the amplifier
from an over-current condition due to improper
battery installation. For harsh environments, the
inputs can be taken 5 V above the positive supply
rail without damage to the device.
TLV340X
µP
R2
1 MΩ
V
ref
D1
0
0
All members are available in PDIP and SOIC with the singles in the small SOT-23 package, duals in the MSOP,
and quads in the TSSOP package.
†
A SELECTION OF OUTPUT COMPARATORS
V
(V)
V
(µV)
I
/Ch
I
t
t
t
t
r
RAIL-TO-
RAIL
OUTPUT
STAGE
CC
IO
CC
(µA)
IB
PLH
PHL
f
DEVICE
(pA)
80
80
5
(µs)
(µs)
(µs)
(µs)
TLV340x
TLV370x
2.5 – 16
2.5 – 16
3 – 16
3 – 16
3 – 16
250
0.47
0.47
9
55
30
5
–
I
OD
PP
PP
OD
OD
250
25
30
5
3.5
0.125
–
I
TLC3702/4
TLC393/339
TLC372/4
1200
1400
1000
1.1
1.1
0.65
0.65
0.55
0.65
0.5
0.22
–
–
–
–
11
5
75
5
–
†
All specifications are typical values measured at 5 V.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright 2000, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLV3401, TLV3402, TLV3404
FAMILY OF NANOPOWER OPEN DRAIN OUTPUT COMPARATORS
SLCS135A – AUGUST 2000 – REVISED NOVEMBER 2000
TLV3401 AVAILABLE OPTIONS
PACKAGED DEVICES
SOT-23
V
max
IO
T
A
SMALL OUTLINE
PLASTIC DIP
(P)
AT 25°C
SYMBOL
†
‡
(D)
(DBV)
0°C to 70°C
TLV3401CD
TLV3401ID
TLV3401CDBV
TLV3401IDBV
VBDC
VBDI
—
3600 µV
-40°C to 125°C
TLV3401IP
†
‡
This package is available taped and reeled. To order this packaging option, add an R suffix to the part number (e.g., TLV3401CDR).
This package is only available taped and reeled. For standard quantities (3000 pieces per reel), add an R suffix (i.e., TLV3401CDBVR. For small
quantities (250 pieces per mini-reel), add a T suffix to the part number (e.g., TLV3401CDBVT).
TLV3402 AVAILABLE OPTIONS
PACKAGED DEVICES
V
max
IO
T
A
SMALL OUTLINE
MSOP
PLASTIC DIP
(P)
AT 25°C
SYMBOL
†
†
(D)
(DGK)
0°C to 70°C
TLV3402CD
TLV3402ID
TLV3402CDGK
TLV3402IDGK
xxTIAJJ
xxTIAJK
—
3600 µV
–40°C to 125°C
TLV3402IP
†
This package is available taped and reeled. To order this packaging option, add an R suffix to the part number (e.g., TLV3402CDR).
TLV3404 AVAILABLE OPTIONS
PACKAGED DEVICES
V
IO
max
T
A
SMALL OUTLINE
PLASTIC DIP
(N)
TSSOP
(PW)
AT 25°C
†
(D)
0°C to 70°C
TLV3404CD
TLV3404ID
—
TLV3404CPW
TLV3404IPW
3600 µV
–40°C to 125°C
TLV3404IN
†
This package is available taped and reeled. To order this packaging option, add an R suffix to the part
number (e.g., TLV3404CDR).
TLV3401
DBV PACKAGE
(TOP VIEW)
TLV3401
D OR P PACKAGE
(TOP VIEW)
TLV3402
D, DGK, OR P PACKAGE
(TOP VIEW)
1
2
3
5
4
V
CC
OUT
GND
NC
IN–
NC
1OUT
1IN–
1IN+
GND
V
CC
1
2
3
4
8
7
6
5
1
2
3
4
8
7
6
5
V
2OUT
2IN–
2IN+
CC
IN+
OUT
NC
GND
IN–
IN+
TLV3404
D, N, OR PW PACKAGE
(TOP VIEW)
1
2
3
4
5
6
7
14
13
12
11
10
9
1OUT
1IN–
1IN+
4OUT
4IN–
4IN+
GND
3IN+
3IN–
3OUT
V
CC
2IN+
2IN–
8
2OUT
2
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLV3401, TLV3402, TLV3404
FAMILY OF NANOPOWER OPEN DRAIN OUTPUT COMPARATORS
SLCS135A – AUGUST 2000 – REVISED NOVEMBER 2000
†
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage, V
Differential input voltage, V
(see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 V
CC
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 V
ID
Input voltage range, V (see Notes 1 and 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 to V
Input current range, I . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±10 mA
Output current range, I
+ 5 V
I
CC
I
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±10 mA
O
Continuous total power dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table
Operating free-air temperature range, T : C suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C
A
I suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –40°C to 125°C
Maximum junction temperature, T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150°C
J
Storage temperature range, T
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to 150°C
stg
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C
†
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltage values, except differential voltages, are with respect to GND.
2. Input voltage range is limited to 20 V or V + 5 V, whichever is smaller.
CC
DISSIPATION RATING TABLE
θ
θ
T
≤ 25°C
T = 125°C
A
POWER RATING
JC
JA
A
PACKAGE
(°C/W)
(°C/W)
POWER RATING
D (8)
38.3
176
710 mW
142 mW
D (14)
26.9
122.6
1022 mW
204.4 mW
DBV (5)
DGK (8)
N (14)
55
54.2
32
324.1
259.9
78
385 mW
481 mW
1600 mW
1200 mW
720 mW
77.1 mW
96.2 mW
320.5 mW
240.4 mW
144 mW
P (8)
41
104
PW (14)
29.3
173.6
recommended operating conditions
MIN
2.5
MAX
UNIT
C-suffix
16
16
±8
±8
+5
70
Single supply
Split supply
I-suffix
C-suffix
I-suffix
2.7
Supply voltage, V
CC
V
±1.25
±1.35
–0.1
0
Common-mode input voltage range, V
ICR
V
V
CC
C-suffix
I-suffix
Operating free-air temperature, T
°C
A
–40
125
3
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLV3401, TLV3402, TLV3404
FAMILY OF NANOPOWER OPEN DRAIN OUTPUT COMPARATORS
SLCS135A – AUGUST 2000 – REVISED NOVEMBER 2000
electrical characteristics at specified operating free-air temperature, V
otherwise noted)
= 2.7 V, 5 V, 15 V (unless
CC
dc performance
†
PARAMETER
Input offset voltage
Offset voltage drift
T
A
MIN
TYP MAX
UNIT
µV
TEST CONDITIONS
25°C
250 3600
V
IO
V
= V /2,
CC
R
S
= 50 Ω,
R = 1 MΩ Full range
P
4400
IC
α
25°C
25°C
3
µV/°C
VIO
55
72
V
IC
V
IC
V
IC
= 0 to 2.7 V,
= 0 to 5 V,
R
R
R
= 50 Ω
= 50 Ω
= 50 Ω
S
S
S
Full range
25°C
50
60
55
65
60
76
88
CMRR Common-mode rejection ratio
dB
Full range
25°C
= 0 to 15 V,
Full range
Large-signal differential voltage
amplification
A
VD
R
= 1 MΩ
P
25°C
1000
V/mV
†
Full range is 0°C to 70°C for C suffix and –40°C to 125°C for I suffix. If not specified, full range is –40°C to 125°C.
input/output characteristics
†
PARAMETER
T
A
MIN
TYP MAX
UNIT
TEST CONDITIONS
25°C
Full range
25°C
20
100
1000
250
I
I
Input offset current
pA
IO
V
= V /2,
CC
R
= 1 MΩ,
R
= 50 Ω
IC
P
S
80
Input bias current
pA
IB
Full range
25°C
1500
r
Differential input resistance
300
50
MΩ
i(d)
High-impedance output leakage
current
I
V
V
= V /2,
CC
V
= V
,
V = 1 V
ID
25°C
pA
OZ
IC
O
CC
= V /2,
CC
I
I
= 2 µA,
V
= –1 V
25°C
25°C
8
IC
OL
OL
ID
V
Low-level output voltage
80
200
300
mV
OL
V
IC
= V /2,
CC
= 50 µA,
V
= –1 V
ID
Full range
†
Full range is 0°C to 70°C for C suffix and –40°C to 125°C for I suffix. If not specified, full range is –40°C to 125°C.
power supply
†
PARAMETER
T
A
MIN
TYP MAX
UNIT
TEST CONDITIONS
Output state low
25°C
Full range
25°C
470
560
100
105
550
750
640
950
I
Supply current (per channel)
R
= No pullup
nA
CC
P
Output state high
Full range
25°C
75
V
= 2.7 V to 5 V
= 5 V to 15 V
CC
CC
Full range
25°C
70
85
80
V
IC
= V /2 V,
CC
PSRR Power supply rejection ratio
dB
No load
V
Full range
†
Full range is 0°C to 70°C for C suffix and –40°C to 125°C for I suffix. If not specified, full range is –40°C to 125°C.
4
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLV3401, TLV3402, TLV3404
FAMILY OF NANOPOWER OPEN DRAIN OUTPUT COMPARATORS
SLCS135A – AUGUST 2000 – REVISED NOVEMBER 2000
switching characteristics at recommended operating conditions, V
(unless otherwise noted)
= 2.7 V, 5 V, 15 V, T = 25°C
A
CC
PARAMETER
TEST CONDITIONS
Overdrive = 2 mV
T
MIN
TYP
175
80
MAX
UNIT
A
Propagation delay time, low-to-high-level
output
t
Overdrive = 10 mV
Overdrive = 50 mV
Overdrive = 2 mV
Overdrive = 10 mV
Overdrive = 50 mV
25°C
(PLH)
f = 10 kHz,
= 1 V,
55
V
R
C
STEP
P
L
µs
= 1 MΩ,
= 10 pF
300
60
Propagation delay time, high-to-low-level
output
t
t
25°C
25°C
(PHL)
30
Fall time
R
= 1 MΩ,
C
= 10 pF
L
5
µs
f
P
NOTE: The response time specified is the interval between the input step function and the instant when the output crosses 1.4 V.
TYPICAL CHARACTERISTICS
Table of Graphs
FIGURE
Input bias/offset current
vs Free-air temperature
vs Free-air temperature
vs Low-level output current
vs Supply voltage
1
Open collector leakage current
Low-level output voltage
2
3, 4, 5
6
V
OL
DD
DD
I
I
Supply current
Supply current
vs Free-air temperature
7
Low-to-high level output response for various input overdrives
High-to-low level output response for various input overdrives
Output fall time
8, 9, 10
11, 12, 13
14
vs Supply voltage
5
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLV3401, TLV3402, TLV3404
FAMILY OF NANOPOWER OPEN DRAIN OUTPUT COMPARATORS
SLCS135A – AUGUST 2000 – REVISED NOVEMBER 2000
TYPICAL CHARACTERISTICS
LOW-LEVEL OUTPUT VOLTAGE
vs
INPUT BIAS/OFFSET CURRENT
vs
OPEN COLLECTOR LEAKAGE CURRENT
vs
LOW-LEVEL OUTPUT CURRENT
FREE-AIR TEMPERATURE
FREE-AIR TEMPERATURE
1200
1000
800
2.7
2.4
2.1
1.8
1.5
1.2
0.9
0.6
0.3
0.0
2400
V
V
= 2.7 V
= –1 V
CC
ID
V
= 15 V
CC
V
= 1 V
2200
2000
1800
1600
1400
1200
1000
800
ID
T
= 125°C
A
T
T
= 70°C
= 25°C
A
V
= 15 V
CC
I
IB
A
600
V
= 2.7 V, 5 V
CC
400
200
T
A
= 0°C
600
400
I
IO
T
A
= –40°C
0
200
0
–200
–200
0
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8
–40 –25 –10
5 20 35 50 65 80 95 110 125
–40 –25 –10
5
20 35 50 65 80 95 110 125
T
– Free-Air Temperature – °C
I
– Low-Level Output Current – mA
A
T
– Free-Air Temperature – °C
OL
A
Figure 1
Figure 2
Figure 3
LOW-LEVEL OUTPUT VOLTAGE
vs
SUPPLY CURRENT
vs
LOW-LEVEL OUTPUT VOLTAGE
vs
LOW-LEVEL OUTPUT CURRENT
SUPPLY VOLTAGE
LOW-LEVEL OUTPUT CURRENT
700
600
500
400
300
200
100
0
15
13.5
12
10.5
9
5
T
= 125°C
A
V
V
= 5 V
V
V
= 15 V
CC
CC
= –1 V
= –1 V
ID
4.5
4
ID
T
= 70°C
= 25°C
A
T
= 125°C
A
T = 125°C
A
3.5
3
T
A
T
= 70°C
A
T
= 70°C
A
T
A
= 25°C
2.5
2
7.5
6
T
A
= 0°C
T
A
= 25°C
T = –40°C
A
1.5
1
4.5
3
T
A
= 0°C
T
A
= 0°C
T
A
= –40°C
0.5
0
T
A
= –40°C
1.5
0
V
= –1 V
ID
10 12 14
V – Supply Voltage – V
CC
2
4
6
8
0
16
0
0.4 0.8
1.2
1.6
2.0 2.4
2.8
0
1
2
3
4
5
6
7
8
9
I
– Low-Level Output Current – mA
I
– Low-Level Output Current – mA
OL
OL
Figure 4
Figure 5
Figure 6
LOW-TO-HIGH LEVEL OUTPUT
RESPONSE FOR VARIOUS
INPUT OVERDRIVES
SUPPLY CURRENT
vs
FREE-AIR TEMPERATURE
3
700
600
500
400
300
200
100
0
V
V
= 2.7 V, 5 V, 15 V
CC
= –1 V
2.5
2
ID
50 mV
1.5
1
2 mV
10 mV
0.5
0
V
C
R
= 2.7 V
CC
0.1
= 10 pF
L
= 1 MΩ (Pullup to V
= 25°C
)
CC
P
0.05
0
T
A
0
50
100 150 200 250 300
t – Time – µs
–40 –25–10
5
20 35 50 65 80 95 110 125
T
– Free-Air Temperature – °C
A
Figure 8
Figure 7
6
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLV3401, TLV3402, TLV3404
FAMILY OF NANOPOWER OPEN DRAIN OUTPUT COMPARATORS
SLCS135A – AUGUST 2000 – REVISED NOVEMBER 2000
TYPICAL CHARACTERISTICS
LOW-TO-HIGH LEVEL OUTPUT
RESPONSE FOR VARIOUS
INPUT OVERDRIVES
LOW-TO-HIGH LEVEL OUTPUT
RESPONSE FOR VARIOUS
INPUT OVERDRIVES
5
4
3
16
14
12
10
8
V
= 15 V
CC
C
= 10 pF
L
50 mV
10 mV
50 mV
2
1
2 mV
6
10 mV
4
2 mV
0
2
V
= 5 V
= 10 pF
= 1 MΩ (Pullup to V
= 25°C
CC
L
P
0
0.1
0.05
0
C
R
T
V
= 15 V
= 10 pF
= 1 MΩ (Pullup to V
= 25°C
CC
L
P
0.1
C
R
T
)
CC
)
CC
0.05
0
A
A
0
50
100 150 200 250 300
0
50 100 150 200 250 300
t – Time – µs
t – Time – µs
Figure 10
Figure 9
HIGH-TO-LOW LEVEL OUTPUT
RESPONSE FOR VARIOUS
INPUT OVERDRIVES
HIGH-TO-LOW LEVEL OUTPUT
RESPONSE FOR VARIOUS
INPUT OVERDRIVES
3
6
5
4
3
2
1
0
2.5
2
50 mV
50 mV
10 mV
2 mV
1.5
10 mV
2 mV
1
0.5
0
–1
V
= 5 V
= 10 pF
= 1 MΩ (Pullup to V
= 25°C
V
= 2.7 V
= 10 pF
= 1 MΩ (Pullup to V
= 25°C
CC
L
P
CC
L
P
0.1
0.05
0
C
R
T
C
R
T
0.1
)
CC
)
CC
0.05
0
A
A
0
50 100 150 200 250 300 350 400
0
50 100 150 200 250 300 350 400
t – Time – µs
t – Time – µs
Figure 12
Figure 11
OUTPUT FALL TIME
vs
HIGH-TO-LOW LEVEL OUTPUT
RESPONSE FOR VARIOUS
INPUT OVERDRIVES
SUPPLY VOLTAGE
16
14
12
8
V
R
= 1 V to –1 V
= 1 MΩ (Pullup to V
CC
Input Fall Time = 500 ns
ID
p
)
7
6
5
4
3
2
1
0
50 mV
T
= 25°C
A
10
8
C
= 50 pF
L
10 mV
2 mV
C
= 10 pF
L
6
4
2
0
V
= 15 V
= 10 pF
= 1 MΩ (Pullup to V
= 25°C
CC
L
P
0.1
C
R
)
CC
0.05
0
T
A
7
8
11
12 13 14 15
2
3
4
5
6
9
10
0
50 100 150 200 250 300 350 400
V
– Supply Voltage – V
CC
t – Time – µs
Figure 13
Figure 14
7
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLV3401, TLV3402, TLV3404
FAMILY OF NANOPOWER OPEN DRAIN OUTPUT COMPARATORS
SLCS135A – AUGUST 2000 – REVISED NOVEMBER 2000
MECHANICAL DATA
D (R-PDSO-G**)
PLASTIC SMALL-OUTLINE PACKAGE
14 PINS SHOWN
0.050 (1,27)
0.020 (0,51)
0.014 (0,35)
0.010 (0,25)
M
14
8
0.008 (0,20) NOM
0.244 (6,20)
0.228 (5,80)
0.157 (4,00)
0.150 (3,81)
Gage Plane
0.010 (0,25)
1
7
0°–8°
0.044 (1,12)
0.016 (0,40)
A
Seating Plane
0.004 (0,10)
0.010 (0,25)
0.004 (0,10)
0.069 (1,75) MAX
PINS **
8
14
16
DIM
0.197
(5,00)
0.344
(8,75)
0.394
(10,00)
A MAX
0.189
(4,80)
0.337
(8,55)
0.386
(9,80)
A MIN
4040047/D 10/96
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion, not to exceed 0.006 (0,15).
D. Falls within JEDEC MS-012
8
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLV3401, TLV3402, TLV3404
FAMILY OF NANOPOWER OPEN DRAIN OUTPUT COMPARATORS
SLCS135A – AUGUST 2000 – REVISED NOVEMBER 2000
MECHANICAL DATA
DBV (R-PDSO-G5)
PLASTIC SMALL-OUTLINE
0,50
M
0,20
0,95
5
0,30
4
0,15 NOM
1,70
1,50
3,00
2,60
1
3
Gage Plane
3,00
2,80
0,25
0°–8°
0,55
0,35
Seating Plane
0,10
1,45
0,95
0,05 MIN
4073253-4/E 05/99
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion.
D. Falls within JEDEC MO-178
9
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLV3401, TLV3402, TLV3404
FAMILY OF NANOPOWER OPEN DRAIN OUTPUT COMPARATORS
SLCS135A – AUGUST 2000 – REVISED NOVEMBER 2000
MECHANICAL DATA
DGK (R-PDSO-G8)
PLASTIC SMALL-OUTLINE PACKAGE
0,38
0,25
M
0,65
8
0,25
5
0,15 NOM
3,05
2,95
4,98
4,78
Gage Plane
0,25
0°–6°
1
4
0,69
0,41
3,05
2,95
Seating Plane
0,10
0,15
0,05
1,07 MAX
4073329/B 04/98
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion.
D. Falls within JEDEC MO-187
10
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLV3401, TLV3402, TLV3404
FAMILY OF NANOPOWER OPEN DRAIN OUTPUT COMPARATORS
SLCS135A – AUGUST 2000 – REVISED NOVEMBER 2000
MECHANICAL DATA
N (R-PDIP-T**)
PLASTIC DUAL-IN-LINE PACKAGE
16 PINS SHOWN
PINS **
14
16
18
20
DIM
0.775
(19,69)
0.775
(19,69)
0.920
(23,37)
0.975
(24,77)
A MAX
A
16
9
0.745
(18,92)
0.745
(18,92)
0.850
(21,59)
0.940
(23,88)
A MIN
0.260 (6,60)
0.240 (6,10)
1
8
0.070 (1,78) MAX
0.325 (8,26)
0.300 (7,62)
0.035 (0,89) MAX
0.020 (0,51) MIN
0.015 (0,38)
Gauge Plane
0.200 (5,08) MAX
Seating Plane
0.010 (0,25) NOM
0.125 (3,18) MIN
0.100 (2,54)
0.010 (0,25)
0.430 (10,92) MAX
0.021 (0,53)
0.015 (0,38)
M
14/18 PIN ONLY
4040049/D 02/00
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. Falls within JEDEC MS-001 (20-pin package is shorter than MS-001).
11
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLV3401, TLV3402, TLV3404
FAMILY OF NANOPOWER OPEN DRAIN OUTPUT COMPARATORS
SLCS135A – AUGUST 2000 – REVISED NOVEMBER 2000
MECHANICAL DATA
P (R-PDIP-T8)
PLASTIC DUAL-IN-LINE
0.400 (10,60)
0.355 (9,02)
8
5
0.260 (6,60)
0.240 (6,10)
1
4
0.070 (1,78) MAX
0.325 (8,26)
0.300 (7,62)
0.020 (0,51) MIN
0.015 (0,38)
Gage Plane
0.200 (5,08) MAX
Seating Plane
0.010 (0,25) NOM
0.125 (3,18) MIN
0.100 (2,54)
0.021 (0,53)
0.430 (10,92)
MAX
0.010 (0,25)
M
0.015 (0,38)
4040082/D 05/98
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. Falls within JEDEC MS-001
For the latest package information, go to http://www.ti.com/sc/docs/package/pkg_info.htm
12
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLV3401, TLV3402, TLV3404
FAMILY OF NANOPOWER OPEN DRAIN OUTPUT COMPARATORS
SLCS135A – AUGUST 2000 – REVISED NOVEMBER 2000
MECHANICAL DATA
PW (R-PDSO-G**)
PLASTIC SMALL-OUTLINE PACKAGE
14 PINS SHOWN
0,30
M
0,10
0,65
0,19
14
8
0,15 NOM
4,50
4,30
6,60
6,20
Gage Plane
0,25
1
7
0°–8°
A
0,75
0,50
Seating Plane
0,10
0,15
0,05
1,20 MAX
PINS **
8
14
16
20
24
28
DIM
3,10
2,90
5,10
4,90
5,10
4,90
6,60
6,40
7,90
7,70
9,80
9,60
A MAX
A MIN
4040064/F 01/97
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion not to exceed 0,15.
D. Falls within JEDEC MO-153
For the latest package information, go to http://www.ti.com/sc/docs/package/pkg_info.htm
13
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue
any product or service without notice, and advise customers to obtain the latest version of relevant information
to verify, before placing orders, that information being relied on is current and complete. All products are sold
subject to the terms and conditions of sale supplied at the time of order acknowledgment, including those
pertaining to warranty, patent infringement, and limitation of liability.
TI warrants performance of its products to the specifications applicable at the time of sale in accordance with
TI’sstandardwarranty. TestingandotherqualitycontroltechniquesareutilizedtotheextentTIdeemsnecessary
to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except
those mandated by government requirements.
Customers are responsible for their applications using TI components.
In order to minimize risks associated with the customer’s applications, adequate design and operating
safeguards must be provided by the customer to minimize inherent or procedural hazards.
TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent
that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other
intellectual property right of TI covering or relating to any combination, machine, or process in which such
products or services might be or are used. TI’s publication of information regarding any third party’s products
or services does not constitute TI’s approval, license, warranty or endorsement thereof.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations and notices. Representation
or reproduction of this information with alteration voids all warranties provided for an associated TI product or
service, is an unfair and deceptive business practice, and TI is not responsible nor liable for any such use.
Resale of TI’s products or services with statements different from or beyond the parameters stated by TI for
that product or service voids all express and any implied warranties for the associated TI product or service,
is an unfair and deceptive business practice, and TI is not responsible nor liable for any such use.
Also see: Standard Terms and Conditions of Sale for Semiconductor Products. www.ti.com/sc/docs/stdterms.htm
Mailing Address:
Texas Instruments
Post Office Box 655303
Dallas, Texas 75265
Copyright 2001, Texas Instruments Incorporated
相关型号：
©2020 ICPDF网 联系我们和版权申明