TPS3838K33QDBVREP [TI]
1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO5, PLASTIC, SOT-23, 5 PIN;型号: | TPS3838K33QDBVREP |
厂家: | TEXAS INSTRUMENTS |
描述: | 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO5, PLASTIC, SOT-23, 5 PIN 光电二极管 |
文件: | 总12页 (文件大小:206K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
TPS3836E18-EP / J25-EP / H30-EP / L30-EP / K33-EP
TPS3837E18-EP / J25-EP / L30-EP / K33-EP
TPS3838E18-EP / J25-EP / L30-EP / K33-EP
www.ti.com
SGLS322C–MAY 2006–REVISED AUGUST 2006
NANOPOWER SUPERVISORY CIRCUITS
FEATURES
APPLICATIONS
•
Applications Using Automotive Low-Power
DSPs, Microcontrollers, or Microprocessors
•
Controlled Baseline
– One Assembly Site
– One Test Site
•
•
•
•
Battery-Powered Equipment
Intelligent Instruments
Wireless Communication Systems
Automotive Systems
– One Fabrication Site
•
•
Extended Temperature Performance of
–55°C to 125°C
Enhanced Diminishing Manufacturing
Sources (DMS) Support
TPS3836, TPS3838
DBV PACKAGE
(TOP VIEW)
•
•
•
Enhanced Product-Change Notification
(1)
1
2
3
Qualification Pedigree
5
V
CT
DD
ESD Protection Exceeds 2000 V Per
GND
MIL-STD-883, Method 3015; Exceeds 200 V
Using Machine Model (C = 200 pF, R = 0)
4
RESET
MR
•
•
Supply Current of 220 nA (Typ)
Precision Supply Voltage Supervision Range:
1.8 V, 2.5 V, 3 V, 3.3 V
TPS3837
DBV PACKAGE
(TOP VIEW)
•
•
Power-On Reset Generator With Selectable
Delay Time of 10 ms or 200 ms
1
2
3
V
DD
5
CT
Push/Pull RESET Output (TPS3836), RESET
Output (TPS3837), or
GND
Open-Drain RESET Output (TPS3838)
•
•
•
Manual Reset
4
RESET
MR
5-Pin SOT-23 Package
Temperature Range –55°C to 125°C
(1) Component qualification in accordance with JEDEC and
industry standards to ensure reliable operation over an
extended temperature range. This includes, but is not limited
to, Highly Accelerated Stress Test (HAST) or biased 85/85,
temperature cycle, autoclave or unbiased HAST,
electromigration, bond intermetallic life, and mold compound
life. Such qualification testing should not be viewed as
justifying use of this component beyond specified
performance and environmental limits.
DESCRIPTION
The TPS3836, TPS3837, TPS3838 families of supervisory circuits provide circuit initialization and timing
supervision, primarily for digital signal processing (DSP) and processor-based systems.
During power on, RESET is asserted when the supply voltage VDD becomes higher than 1.1 V. Thereafter, the
supervisory circuit monitors VDD and keeps RESET output active as long as VDD remains below the threshold
voltage (VIT). An internal timer delays the return of the output to the inactive state (high) to ensure proper system
reset. The delay time starts after VDD has risen above VIT.
When CT is connected to GND, a fixed delay time of typical 10 ms is asserted. When connected to VDD, the
delay time is typically 200 ms.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Copyright © 2006, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
TPS3836E18-EP / J25-EP / H30-EP / L30-EP / K33-EP
TPS3837E18-EP / J25-EP / L30-EP / K33-EP
TPS3838E18-EP / J25-EP / L30-EP / K33-EP
www.ti.com
SGLS322C–MAY 2006–REVISED AUGUST 2006
When the supply voltage drops below VIT, the output becomes active (low) again.
All the devices of this family have a fixed-sense VIT set by an internal voltage divider.
The TPS3836 has an active-low push-pull RESET output. The TPS3837 has active-high push-pull RESET, and
the TPS3838 integrates an active-low open-drain RESET output.
TPS3836K33
MSP430
V
DD
V
CC
CT
Xin
Lithium
Battery
3.6 V
RST
RESET
MR
Xout
Quartz
32 kHz
T
V
SS
GND
Figure 1. Typical Operating Circuit
The product spectrum is designed for supply voltages of 1.8 V, 2.5 V, 3 V, and 3.3 V. The circuits are available
in a 5-pin SOT-23 package. The TPS3836, TPS3837, and TPS3838 families are characterized for operation
over a temperature range of –55°C to 125°C.
2
Submit Documentation Feedback
TPS3836E18-EP / J25-EP / H30-EP / L30-EP / K33-EP
TPS3837E18-EP / J25-EP / L30-EP / K33-EP
TPS3838E18-EP / J25-EP / L30-EP / K33-EP
www.ti.com
SGLS322C–MAY 2006–REVISED AUGUST 2006
PACKAGE INFORMATION
ORDERABLE PART
NUMBER(1)
TA
THRESHOLD VOLTAGE
SYMBOL
TPS3836E18QDBVREP(2)
TPS3836J25QDBVREP(2)
TPS3836H30QDBVREP(2)
TPS3836L30QDBVREP(2)
TPS3836K33QDBVREP(2)
TPS3837E18QDBVREP(2)
TPS3837J25QDBVREP(2)
TPS3837L30QDBVREP(2)
TPS3837K33QDBVREP
TPS3838E18QDBVREP(2)
TPS3838J25QDBVREP(2)
TPS3838L30QDBVREP(2)
TPS3838K33QDBVREP(2)
TPS3836E18MDBVREP(2)
TPS3836J25MDBVREP(2)
TPS3836H30MDBVREP(2)
TPS3836L30MDBVREP
TPS3836K33MDBVREP(2)
TPS3837E18MDBVREP(2)
TPS3837J25MDBVREP(2)
TPS3837L30MDBVREP(2)
TPS3837K33MDBVREP
TPS3838E18MDBVREP(2)
TPS3838J25MDBVREP(2)
TPS3838L30MDBVREP(2)
TPS3838K33MDBVREP(2)
1.71 V
2.25 V
2.79 V
2.64 V
2.93 V
1.71 V
2.25 V
2.64 V
2.93 V
1.71 V
2.25 V
2.64 V
2.93 V
1.71 V
2.25 V
2.79 V
2.64 V
2.93 V
1.71 V
2.25 V
2.64 V
2.93 V
1.71 V
2.25 V
2.64 V
2.93 V
PLKQ
PLLQ
PLMQ
PLNQ
PLOQ
PLPQ
PLQQ
PLRQ
PLSQ
PLTQ
PLUQ
PLVQ
PLWQ
–40°C to 125°C
PKRM
PKTM
BTX
PKUM
PKVM
PKXM
PKUM
PKZM
PLAM
PLBM
PLCM
PLDM
–55°C to 125°C
(1) DBVR indicates tape and reel of 3000 parts.
(2) Product Preview, parameters in electrical table subject to change
ORDERING INFORMATION
TPS383 6 E 18 M DBV R EP
EP Designator
Reel
Package
M-Temperature Designator
Nominal Supply Voltage
Typical Reset Threshold Voltage
Functionality
Family
3
Submit Documentation Feedback
TPS3836E18-EP / J25-EP / H30-EP / L30-EP / K33-EP
TPS3837E18-EP / J25-EP / L30-EP / K33-EP
TPS3838E18-EP / J25-EP / L30-EP / K33-EP
www.ti.com
SGLS322C–MAY 2006–REVISED AUGUST 2006
FUNCTION TABLE
(1)
MR
L
VDD > VIT
RESET
RESET(2)
0
1
0
1
L
L
H
H
H
L
L
H
L
H
H
(1) TPS3836 and TPS3838
(2) TPS3837
FUNCTIONAL BLOCK DIAGRAM
V
DD
R3
C
T
MR
C1
RESET (TPS3837-Push-Pull)
R1
Reset Logic
and Timer
+
RESET (TPS3836-Push-Pull
TPS3838-Open-Drain)
S1
−
R2
S2
C2
S3
Band-Gap
Reference
C3
Refresh
Timer
GND
4
Submit Documentation Feedback
TPS3836E18-EP / J25-EP / H30-EP / L30-EP / K33-EP
TPS3837E18-EP / J25-EP / L30-EP / K33-EP
TPS3838E18-EP / J25-EP / L30-EP / K33-EP
www.ti.com
SGLS322C–MAY 2006–REVISED AUGUST 2006
TIMING DIAGRAM
A
B
C
D
E
F
G
V
DD
V
IT
< 1.1 V
MR
t
t
RESET
t
t
d
t
d
t
d
Undefined
Output
Undefined
Output
Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted)
(1)
VDD
Supply voltage(2)
7 V
All other pins(2)
–0.3 V to 7 V
5 mA
IOL
IOH
IIK
Maximum low output current
Maximum high output current
Input clamp current (VI < 0 or VI > VDD
–5 mA
)
±10 mA
IOK
TA
Output clamp current (VO < 0 or VO > VDD
Operating free-air temperature range
Storage temperature range
)
±10 mA
–55°C to 125°C
–65°C to 150°C
150°C
Tstg
TJ
Maximum junction temperature
Soldering temperature
260°C
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating
conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values are with respect to GND. For reliable operation, the device must not be continuously operated at 7 V for more than
t = 1000 h.
5
Submit Documentation Feedback
TPS3836E18-EP / J25-EP / H30-EP / L30-EP / K33-EP
TPS3837E18-EP / J25-EP / L30-EP / K33-EP
TPS3838E18-EP / J25-EP / L30-EP / K33-EP
www.ti.com
SGLS322C–MAY 2006–REVISED AUGUST 2006
Thermal Resistance Table
RESISTANCE
θJC (°C/W)
HIGH
130.9
205.6
LOW
148.1
347
θJA (°C/W)
Recommended Operating Conditions
MIN
1.6
MAX
UNIT
VDD
VI
Supply voltage
6
V
Input voltage
0
VDD + 0.3
V
V
VIH
VIL
High-level input voltage
Low-level input voltage
0.7 × VDD
0.3 × VDD
100
V
∆t/∆v
TA
Input transition rise and fall rate at MR
Operating free-air temperature
ns/V
°C
–55
125
Electrical Characteristics
over recommended operating conditions (unless otherwise noted)
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX UNIT
VDD = 3.3 V, IOH = –2 mA
VDD = 6 V, IOH = –3 mA
VDD = 2 V, IOH = –1 mA
VDD = 3.3 V, IOH = –2 mA
VDD = 2 V, IOL = 1 mA
VDD = 3.3 V, IOL = 2 mA
VDD = 3.3 V, IOL = 2 mA
VDD = 6 V, IOL = 3 mA
RESET
(TPS3836)
High-level output
voltage
VOH
0.8 × VDD
V
RESET
(TPS3837)
RESET
(TPS3836/8)
Low-level output
voltage
VOL
0.4
0.2
V
V
RESET
(TPS3837)
TPS3836/8
TPS3837
VDD ≥ 1.1 V, IOL = 50 µA
Power-up reset
voltage(1)
TA = 25°C
0.8 × VDD
0.6 × VDD
1.64
VDD ≥ 1.1 V, IOH = –50 µA
TA = Full range
TPS383xE18
TPS383xJ25
TPS383xH30
TPS383xL30
1.71
2.25
2.79
2.64
2.93
2.93
30
1.73
2.3
2.16
Negative-going
input threshold
voltage(2)
2.7
2.85
2.71
3.1
VIT
V
2.54
TA = 25°C
2.82
TPS383xK33
TA = Full range
1.7 V < VIT < 2.5 V
2.5 V < VIT < 3.5 V
3.5 V < VIT < 5 V
2.72
3.2
Vhys Hysteresis at VDD input
40
mV
50
TA = 25°C
–30
–20
–60
–60
–90
–120
25
(3)
(3)
MR
MR = 0.7 × VDD, VDD = 6 V
CT = VDD = 6 V
µA
nA
µA
High-level input
current
IIH
TA = Full range
CT
MR
CT
–25
TA = 25°C
–130
–90
–200
–200
–340
–350
25
MR = 0 V, VDD = 6 V
Low-level input
current
IIL
TA = Full range
CT = 0 V, VDD = 6 V
–25
nA
nA
High-level output
current
IOH
TPS3838
VDD = VIT + 0.2 V, VOH = VDD
25
(1) The lowest voltage at which RESET output becomes active, tr, VDD ≥ 15 µs/V
(2) To ensure best stability of the threshold voltage, a bypass capacitor (ceramic, 0.1 µF) should be placed near the supply terminal.
(3) If manual reset is unused, MR should be connected to VDD to minimize current consumption.
6
Submit Documentation Feedback
TPS3836E18-EP / J25-EP / H30-EP / L30-EP / K33-EP
TPS3837E18-EP / J25-EP / L30-EP / K33-EP
TPS3838E18-EP / J25-EP / L30-EP / K33-EP
www.ti.com
SGLS322C–MAY 2006–REVISED AUGUST 2006
Electrical Characteristics (continued)
over recommended operating conditions (unless otherwise noted)
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX UNIT
TA = 25°C
220
500
VDD > VIT, VDD < 3 V
VDD > VIT, VDD > 3 V
VDD < VIT
TA = Full range
TA = 25°C
600
nA
250
10
550
IDD
Supply current
TA = Full range
TA = 25°C
650
25
µA
30
TA = Full range
Internal pullup resistor at MR
Input capacitance at MR, CT
33
5
kΩ
CI
VI = 0 V to VDD
pF
Timing Requirements
RL = 1 MΩ, CL = 50 pF, TA = 25°C
PARAMETER
TEST CONDITIONS
TYP UNIT
At VDD
VIH = VIT + 0.2 V, VIL = VIT – 0.2 V
6
1
µs
µs
tw
Pulse width
At MR
VDD ≥ VIT + 0.2 V, VIL = 0.3 × VDD, VIH = 0.7 × VDD
Switching Characteristics
RL = 1 MΩ, CL = 50 pF, TA = 25°C
PARAMETER
TEST CONDITIONS
MIN
TYP MAX UNIT
CT = GND
CT = VDD
5
10
200
10
15
V
DD ≥ VIT + 0.2 V, MR = 0.7 × VDD
,
td
Delay time
ms
See timing diagram
Propagation (delay)
VDD to RESET delay VIL = VIT – 0.2 V, VIH = VIT + 0.2 V
tPHL time, high- to low-level (TPS3836,
µs
VIL = 1.6 V
50
10
50
output
TPS3838)
Propagation (delay)
tPLH time, low- to high-level
output
VIL = VIT – 0.2 V, VIH = VIT + 0.2 V
VIL = 1.6 V
VDD to RESET delay
(TPS3837)
µs
µs
µs
Propagation (delay)
MR to RESET delay
tPHL time, high- to low-level (TPS3836,
V
DD ≥ VIT + 0.2 V, VIL = 0.3 × VDD, VIH = 0.7 × VDD
DD ≥ VIT + 0.2 V, VIL = 0.3 × VDD, VIH = 0.7 × VDD
0.3
0.3
output
TPS3838)
Propagation (delay)
tPLH time, low- to high-level
output
MR to RESET delay
(TPS3837)
V
7
Submit Documentation Feedback
TPS3836E18-EP / J25-EP / H30-EP / L30-EP / K33-EP
TPS3837E18-EP / J25-EP / L30-EP / K33-EP
TPS3838E18-EP / J25-EP / L30-EP / K33-EP
www.ti.com
SGLS322C–MAY 2006–REVISED AUGUST 2006
TYPICAL CHARACTERISTICS
Table of Graphs
FIGURE
IDD
Supply current
vs Supply voltage
2
3
4
5
6
7
IMR
VOL
VOH
Manual reset current
vs Manual reset voltage
Low-level output voltage
High-level output voltage
Normalized reset threshold voltage
Minimum pulse duration at VDD
vs Low-level output current
vs High-level output current
vs Free-air temperature
vs VDD threshold overdrive
SUPPLY CURRENT
vs
SUPPLY VOLTAGE
MANUAL RESET CURRENT
vs
MANUAL RESET VOLTAGE
100
0
10
8
V
= 6 V
DD
MR = Open
CT = GND
CT = GND
T
= 85°C
= 25°C
A
T
A
= −40°C
−100
−200
−300
−400
−500
T
= 0°C
T
A
A
6
T
= 0°C
A
T
A
= 25°C
4
T
A
= 85°C
T
A
= −40°C
2
0
−2
0
2
4
6
0
2
4
6
V
MR
− Manual Reset Voltage − V
V
DD
− Supply Voltage − V
Figure 2.
Figure 3.
8
Submit Documentation Feedback
TPS3836E18-EP / J25-EP / H30-EP / L30-EP / K33-EP
TPS3837E18-EP / J25-EP / L30-EP / K33-EP
TPS3838E18-EP / J25-EP / L30-EP / K33-EP
www.ti.com
SGLS322C–MAY 2006–REVISED AUGUST 2006
LOW-LEVEL OUTPUT VOLTAGE
vs
LOW-LEVEL OUTPUT CURRENT
HIGH-LEVEL OUTPUT VOLTAGE
vs
HIGH-LEVEL OUTPUT CURRENT
2.0
1.5
1.0
0.5
2.0
V
= 2 V
DD
V
= 2 V
DD
MR = Open
CT = GND
MR = Open
CT = GND
1.5
1.0
0.5
0.0
T
= 85°C
A
T
= 25°C
A
T
= 25°C
A
T = 0°C
A
T
A
= 85°C
T
= 0°C
A
T
= −40°C
A
T
A
= −40°C
0.0
0
1
2
3
4
5
6
7
0
1
2
3
4
5
I
− Low-Level Output Current − mA
I
− High-Level Output Current − mA
OL
OH
Figure 4.
Figure 5.
NORMALIZED RESET THRESHOLD VOLTAGE
MINIMUM PULSE DURATION AT VDD
vs
vs
FREE-AIR TEMPERATURE
VDD THRESHOLD OVERDRIVE
1.001
1
22
20
18
16
14
12
10
8
MR = Open
CT = GND
T
A
= 25°C
0.999
0.998
0.997
0.996
0.995
CT = GND
MR = Open
6
4
2
0
−40
−15
10
35
60
85
0
0.2 0.4 0.6 0.8
1
1.2 1.4 1.6 1.8
2
T
A
− Free-Air Temperature − °C
V
DD
− Threshold Overdrive − V
Figure 6.
Figure 7.
9
Submit Documentation Feedback
PACKAGE OPTION ADDENDUM
www.ti.com
5-Feb-2007
PACKAGING INFORMATION
Orderable Device
TPS3836L30MDBVREP
TPS3837K33MDBVREP
TPS3837K33QDBVREP
V62/06637-09XE
Status (1)
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
Package Package
Pins Package Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
Qty
Type
Drawing
SOT-23
DBV
5
5
5
5
5
5
3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
DBV
DBV
DBV
DBV
DBV
3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
V62/06637-17XE
3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
V62/06637-22XE
3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 1
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Applications
Audio
Automotive
Broadband
Digital Control
Medical
Amplifiers
Data Converters
DSP
Clocks and Timers
Interface
amplifier.ti.com
dataconverter.ti.com
dsp.ti.com
www.ti.com/clocks
interface.ti.com
logic.ti.com
www.ti.com/audio
www.ti.com/automotive
www.ti.com/broadband
www.ti.com/digitalcontrol
www.ti.com/medical
www.ti.com/military
Logic
Military
Power Mgmt
Microcontrollers
RFID
power.ti.com
microcontroller.ti.com
www.ti-rfid.com
Optical Networking
Security
Telephony
Video & Imaging
Wireless
www.ti.com/opticalnetwork
www.ti.com/security
www.ti.com/telephony
www.ti.com/video
RF/IF and ZigBee® Solutions www.ti.com/lprf
www.ti.com/wireless
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2008, Texas Instruments Incorporated
相关型号:
TPS3838L30MDBVREP
IC 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO5, PLASTIC, SOT-23, 5 PIN, Power Management Circuit
TI
©2020 ICPDF网 联系我们和版权申明