TPS76601 [TI]
ULTRA LOW QUIESCENT CURRENT 250-mA LOW-DROPOUT VOLTAGE REGULATORS; 超低静态电流250 mA低压差稳压器
| 型号： | TPS76601 |
| 厂家： | 
TEXAS INSTRUMENTS |
| 描述： | ULTRA LOW QUIESCENT CURRENT 250-mA LOW-DROPOUT VOLTAGE REGULATORS |
| 文件： | 总18页 (文件大小：267K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
TPS76615, TPS76618, TPS76625, TPS76627
TPS76628, TPS76630, TPS76633, TPS76650, TPS76601
ULTRA LOW QUIESCENT CURRENT 250-mA LOW-DROPOUT VOLTAGE REGULATORS
SLVS237 – AUGUST 1999
D PACKAGE
(TOP VIEW)
250-mA Low-Dropout Voltage Regulator
Available in 1.5-V, 1.8-V, 2.5-V, 2.7-V, 2.8-V,
3.0-V, 3.3-V, 5.0-V Fixed Output and
Adjustable Versions
NC/FB
PG
OUT
OUT
IN
1
2
3
4
8
7
6
5
Dropout Voltage to 140 mV (Typ) at 250 mA
(TPS76650)
GND
EN
IN
Ultra-Low 35-µA Typical Quiescent Current
3% Tolerance Over Specified Conditions for
Fixed-Output Versions
Open Drain Power Good
8-Pin SOIC Package
Thermal Shutdown Protection
description
This device is designed to have an ultra-low quiescent current and be stable with a 4.7-µF capacitor. This
combination provides high performance at a reasonable cost.
Because the PMOS device behaves as a low-value resistor, the dropout voltage is very low (typically 230 mV
at an output current of 250 mA for the TPS76650) and is directly proportional to the output current. Additionally,
since the PMOS pass element is a voltage-driven device, the quiescent current is very low and independent
of output loading (typically 35 µA over the full range of output current, 0 mA to 250 mA). These two key
specifications yield a significant improvement in operating life for battery-powered systems. This LDO family
also features a sleep mode; applying a TTL high signal to EN (enable) shuts down the regulator, reducing the
quiescent current to less than 1 µA (typ).
TPS76633
DROPOUT VOLTAGE
vs
TPS76633
GROUND CURRENT
vs
FREE-AIR TEMPERATURE
LOAD CURRENT
0
10
35.0
34.9
34.8
34.7
34.6
34.5
34.4
34.3
34.2
34.1
34
V = 3.2 V
I
V
O
= 3.3 V
I
= 250 mA
O
T
A
= 25°C
I
O
= 150 mA
–1
10
–2
10
–3
10
I
O
= 50 mA
I
O
= 10 mA
–50 –25
0
25
50
75
100 125 150
0
25 50 75 100 125 150 175 200 225 250
– Load Current – mA
T
– Free-Air Temperature – °C
I
L
A
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright 1999, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TPS76615, TPS76618, TPS76625, TPS76627
TPS76628, TPS76630, TPS76633, TPS76650, TPS76601
ULTRA LOW QUIESCENT CURRENT 250-mA LOW-DROPOUT VOLTAGE REGULATORS
SLVS237 – AUGUST 1999
description (continued)
Power good (PG) is an active high output, which can be used to implement a power-on reset or a low-battery
indicator.
The TPS766xx is offered in 1.5-V, 1.8-V, 2.5-V, 2.7-V, 2.8-V, 3.0-V, 3.3-V and 5.0-V fixed-voltage versions and
in an adjustable version (programmable over the range of 1.25 V to 5.5 V). Output voltage tolerance is specified
as a maximum of 3% over line, load, and temperature ranges. The TPS766xx family is available in 8 pin SOIC
package.
AVAILABLE OPTIONS
OUTPUT VOLTAGE
PACKAGED DEVICES
(V)
T
J
SOIC
(D)
TYP
5.0
3.3
3.0
2.8
2.7
2.5
1.8
1.5
TPS76650D
TPS76633D
TPS76630D
TPS76628D
TPS76627D
TPS76625D
TPS76618D
TPS76615D
–40°C to 125°C
Adjustable
1.25 V to 5.5 V
TPS76601D
The TPS76601 is programmable using an external resistor divider (see application
information). The D package is available taped and reeled. Add an R suffix to the
device type (e.g., TPS76601DR).
TPS766xx
5
6
2
1
7
8
V
IN
IN
PG
PG
I
NC/FB
OUT
OUT
V
O
4
0.1 µF
EN
†
C
O
+
4.7 µF
GND
3
300 mΩ
†
See application information section for capacitor selection details.
Figure 1. Typical Application Configuration for Fixed Output Options
2
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TPS76615, TPS76618, TPS76625, TPS76627
TPS76628, TPS76630, TPS76633, TPS76650, TPS76601
ULTRA LOW QUIESCENT CURRENT 250-mA LOW-DROPOUT VOLTAGE REGULATORS
SLVS237 – AUGUST 1999
functional block diagram—adjustable version
IN
EN
PG
_
+
OUT
+
_
R1
V
ref
= 1.224 V
FB/NC
R2
GND
External to the device
functional block diagram—fixed-voltage version
IN
EN
PG
_
+
OUT
+
_
R1
V
ref
= 1.224 V
R2
GND
3
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TPS76615, TPS76618, TPS76625, TPS76627
TPS76628, TPS76630, TPS76633, TPS76650, TPS76601
ULTRA LOW QUIESCENT CURRENT 250-mA LOW-DROPOUT VOLTAGE REGULATORS
SLVS237 – AUGUST 1999
Terminal Functions – SOIC Package
TERMINAL
I/O
DESCRIPTION
NAME
NO.
4
EN
I
I
Enable input
FB/NC
GND
IN
1
Feedback input voltage for adjustable device (no connect for fixed options)
3
Regulator ground
Input voltage
5
I
IN
6
I
Input voltage
OUT
OUT
PG
7
O
O
O
Regulated output voltage
Regulated output voltage
PG output
8
2
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
‡
Input voltage range , V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.3 V to 13.5 V
I
Voltage range at EN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.3 V to 16.5 V
Maximum PG voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16.5 V
Peak output current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Internally limited
Continuous total power dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See dissipation rating tables
Output voltage, V (OUT, FB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V
O
Operating virtual junction temperature range, T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –40°C to 125°C
J
Storage temperature range, T
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to 150°C
stg
ESD rating, HBM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 kV
†
‡
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
All voltage values are with respect to network terminal ground.
DISSIPATION RATING TABLE 1 – FREE-AIR TEMPERATURES
AIR FLOW
(CFM)
T
< 25°C
DERATING FACTOR
T
= 70°C
T = 85°C
A
A
A
PACKAGE
POWER RATING
ABOVE T = 25°C
POWER RATING POWER RATING
A
0
568 mW
5.68 mW/°C
9.04 mW/°C
312 mW
497 mW
227 mW
361 mW
D
250
904 mW
recommended operating conditions
MIN
MAX
UNIT
V
2.7
1.2
0
10
5.5
Input voltage, V
I
Output voltage range, V
V
O
Output current, I (Note 1)
250
125
mA
°C
O
Operating virtual junction temperature, T (Note 1)
–40
J
To calculate the minimum input voltage for your maximum output current, use the following equation: V
I(min)
= V
+ V
.
DO(max load)
O(max)
NOTE 1: Continuous current and operating junction temperature are limited by internal protection circuitry, but it is not recommended that the
device operate under conditions beyond those specified in this table for extended periods of time.
4
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TPS76615, TPS76618, TPS76625, TPS76627
TPS76628, TPS76630, TPS76633, TPS76650, TPS76601
ULTRA LOW QUIESCENT CURRENT 250-mA LOW-DROPOUT VOLTAGE REGULATORS
SLVS237 – AUGUST 1999
electrical characteristics over recommended operating free-air temperature range,
V = V
+ 1 V, I = 10 µA, EN = 0 V, C = 4.7 µF (unless otherwise noted)
i
O(typ)
O
O
PARAMETER
TEST CONDITIONS
5.5 V ≥ V ≥ 1.25 V, T = 25°C
MIN
TYP
MAX
UNIT
V
O
O
J
TPS76601
TPS76615
TPS76618
TPS76625
TPS76627
TPS76628
TPS76630
TPS76633
TPS76650
5.5 V ≥ V ≥ 1.25 V, T = –40°C to 125°C
0.97V
1.03V
O
J
O
O
T = 25°C,
J
2.7 V < V < 10 V
IN
1.5
1.8
2.5
2.7
2.8
3.0
3.3
5.0
35
T = –40°C to 125°C, 2.7 V < V < 10 V
J IN
1.455
1.545
T = 25°C,
J
2.8 V < V < 10 V
IN
T = –40°C to 125°C, 2.8 V < V < 10 V
J IN
1.746
2.425
2.619
2.716
2.910
3.201
4.850
1.854
2.575
2.781
2.884
3.090
3.399
5.150
50
T = 25°C,
J
3.5 V < V < 10 V
IN
T = –40°C to 125°C, 3.5 V < V < 10 V
J IN
Output voltage
(10 µA to 250 mA load)
(see Note 2)
T = 25°C,
J
3.7 V < V < 10 V
IN
V
T = –40°C to 125°C, 3.7 V < V < 10 V
J IN
T = 25°C,
J
3.8 V < V < 10 V
IN
T = –40°C to 125°C, 3.8 V < V < 10 V
J IN
T = 25°C,
J
4.0 V < V < 10 V
IN
T = –40°C to 125°C, 4.0 V < V < 10 V
J IN
T = 25°C,
J
4.3 V < V < 10 V
IN
T = –40°C to 125°C, 4.3 V < V < 10 V
J IN
T = 25°C,
J
6.0 V < V < 10 V
IN
T = –40°C to 125°C, 6.0 V < V < 10 V
J IN
10 µA < I < 250 mA, T = 25°C
Quiescent current (GND current)
EN = 0V, (see Note 2)
O
J
µA
I
O
= 250 mA,
T = –40°C to 125°C
J
Output voltage line regulation (∆V /V
(see Notes 2 and 3)
O
O
)
V
+ 1 V < V ≤ 10 V, T = 25°C
0.01
0.5%
200
%/V
O
I
J
Load regulation
I
O
= 10 µA to 250 mA
BW = 300 Hz to 50 kHz,
C
Output noise voltage
Output current Limit
µVrms
= 4.7 µF,
T = 25°C
J
O
V
O
= 0 V
0.8
1.2
A
Thermal shutdown junction temperature
150
°C
EN = V
EN = V
T = 25°C,
J
I,
I,
1
µA
µA
2.7 V < V < 10 V
I
Standby current
T = –40°C to 125°C
J
10
2.7 V < V < 10 V
I
FB input current
TPS76601
FB = 1.5 V
2
nA
V
High level enable input voltage
Low level enable input voltage
2.0
92
0.8
V
f = 1 kHz,
C
= 4.7 µF,
O
Power supply ripple rejection (see Note 2)
63
dB
V
I
I
= 10 µA,
T = 25°C
J
O
Minimum input voltage for valid PG
Trip threshold voltage
= 300µA
1.1
O(PG)
V
O
decreasing
98
%V
%V
V
O
PG
Hysteresis voltage
Output low voltage
Leakage current
Measured at V
0.5
O
O
V = 2.7 V,
I
I
= 1mA
O(PG)
0.15
0.4
1
V
= 5 V
µA
(PG)
EN = 0 V
EN = V
–1
–1
0
1
Input current (EN)
µA
1
I
NOTE: 2. Minimum IN operating voltage is 2.7 V or V
+ 1 V, whichever is greater. Maximum IN voltage 10 V.
O(typ)
5
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TPS76615, TPS76618, TPS76625, TPS76627
TPS76628, TPS76630, TPS76633, TPS76650, TPS76601
ULTRA LOW QUIESCENT CURRENT 250-mA LOW-DROPOUT VOLTAGE REGULATORS
SLVS237 – AUGUST 1999
electrical characteristics over recommended operating free-air temperature range,
V = V
+ 1 V, I = 10 µA, EN = 0 V, C = 4.7 µF (unless otherwise noted) (continued)
i
O(typ)
O
O
PARAMETER
TEST CONDITIONS
T = 25°C
MIN
TYP
MAX
540
470
400
250
UNIT
I
O
I
O
I
O
I
O
I
O
I
O
I
O
I
O
= 250 mA,
= 250 mA,
= 250 mA,
= 250 mA,
= 250 mA,
= 250 mA,
= 250 mA,
= 250 mA,
310
J
TPS76628
TPS76630
TPS76633
TPS76650
T = –40°C to 125°C
J
T = 25°C
J
270
230
140
T = –40°C to 125°C
J
Dropout voltage
(See Note 4)
mV
T = 25°C
J
T = –40°C to 125°C
J
T = 25°C
J
T = –40°C to 125°C
J
NOTES: 3. If V ≤ 1.8 V then V
imin
= 2.7 V, V = 10 V:
imax
O
V
V
V
V
2.7 V
1000
O
O
imax
100
Line Reg. (mV)
% V
If V ≥ 2.5 V then V
imin
= V + 1 V, V
imax
= 10 V:
% V
O
O
V
1 V
imax
O
Line Reg. (mV)
1000
100
4. IN voltage equals V (Typ) – 100 mV; TPS76601 output voltage set to 3.3 V nominal with external resistor divider. TPS76615,
O
TPS76618, TPS76625, and TPS76627 dropout voltage limited by input voltage range limitations (i.e., TPS76630 input voltage
needs to drop to 2.9 V for purpose of this test).
Table of Graphs
FIGURE
vs Load current
2, 3
4, 5
Output voltage
Ground current
vs Free-air temperature
vs Load current
6, 7
vs Free-air temperature
vs Frequency
8, 9
Power supply ripple rejection
Output spectral noise density
Output impedance
10
vs Frequency
11
vs Frequency
12
Dropout voltage
vs Free-air temperature
13, 14
15, 17
16, 18
19
Line transient response
Load transient response
Output voltage
vs Time
Dropout voltage
vs Input voltage
20
Equivalent series resistance (ESR)
Equivalent series resistance (ESR)
vs Output current
vs Added ceramic capacitance
21 – 24
25, 26
6
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TPS76615, TPS76618, TPS76625, TPS76627
TPS76628, TPS76630, TPS76633, TPS76650, TPS76601
ULTRA LOW QUIESCENT CURRENT 250-mA LOW-DROPOUT VOLTAGE REGULATORS
SLVS237 – AUGUST 1999
TYPICAL CHARACTERISTICS
TPS76615
TPS76633
OUTPUT VOLTAGE
OUTPUT VOLTAGE
vs
vs
LOAD CURRENT
LOAD CURRENT
1.494
3.304
V = 2.7 V
I
V = 4.3 V
I
T
= 25°C
A
T
= 25°C
A
1.493
1.492
1.491
1.490
1.489
1.488
1.487
3.302
3.300
3.298
3.296
3.294
3.292
3.29
0
50
100
150
200
250
0
50
100
150
200
250
I
L
– Load Current – mA
I
L
– Load Current – mA
Figure 2
Figure 3
TPS76633
TPS76615
OUTPUT VOLTAGE
vs
OUTPUT VOLTAGE
vs
FREE-AIR TEMPERATURE
FREE-AIR TEMPERATURE
3.310
3.305
3.300
3.295
3.290
3.285
3.280
3.275
3.270
3.265
1.505
1.500
1.495
1.490
1.485
1.480
1.475
I
O
= 10 µA
V = 4.3 V
V = 2.7 V
I
I
I
O
= 10 µA
I
O
= 250 mA
I
O
= 250 mA
–50 –25
0
25
50
75
100 125 150
–50 –25
0
25
50
75
100 125 150
T
A
– Free-Air Temperature – °C
T
A
– Free-Air Temperature – °C
Figure 4
Figure 5
7
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TPS76615, TPS76618, TPS76625, TPS76627
TPS76628, TPS76630, TPS76633, TPS76650, TPS76601
ULTRA LOW QUIESCENT CURRENT 250-mA LOW-DROPOUT VOLTAGE REGULATORS
SLVS237 – AUGUST 1999
TYPICAL CHARACTERISTICS
TPS76633
GROUND CURRENT
vs
TPS76615
GROUND CURRENT
vs
LOAD CURRENT
LOAD CURRENT
35.0
34.9
34.8
34.7
34.6
34.5
34.4
34.3
34.2
34.1
34.0
34.0
33.9
33.8
33.7
33.6
33.5
33.4
33.3
33.2
33.1
33.0
V
T
= 1.5 V
= 25°C
V
T
= 3.3 V
= 25°C
O
A
O
A
0
25 50 75 100 125 150 175 200 225 250
0
25 50 75 100 125 150 175 200 225 250
I
L
– Load Current – mA
I
L
– Load Current – mA
Figure 6
Figure 7
TPS76633
TPS76615
GROUND CURRENT
vs
GROUND CURRENT
vs
FREE-AIR TEMPERATURE
FREE-AIR TEMPERATURE
55
50
45
40
35
30
25
20
15
10
55
50
45
40
35
30
25
20
15
V
= 3.3 V
= 250 mA
V
= 1.5 V
O
O
I
O
I
O
= 250 mA
0
–50
0
50
100
150
–50
50
100
150
T
A
– Free-Air Temperature – °C
T
A
– Free-Air Temperature – °C
Figure 8
Figure 9
8
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TPS76615, TPS76618, TPS76625, TPS76627
TPS76628, TPS76630, TPS76633, TPS76650, TPS76601
ULTRA LOW QUIESCENT CURRENT 250-mA LOW-DROPOUT VOLTAGE REGULATORS
SLVS237 – AUGUST 1999
TYPICAL CHARACTERISTICS
TPS76633
TPS76633
POWER SUPPLY RIPPLE REJECTION
OUTPUT SPECTRAL NOISE DENSITY
vs
vs
FREQUENCY
FREQUENCY
1
0
70
60
50
40
30
20
10
10
V = 4.3 V
I
I
= 150 mA
O
C
= 10 µF
= 250 mA
= 25°C
O
I
O
T
A
I
= 1 mA
O
10
–1
10
10
V = 4.3 V
I
O
A
C
T
= 10 µF
= 25°C
–2
10
10 100 1k 10k 100k 1M 10M
100
1k
10k
100k
f – Frequency – Hz
f – Frequency – Hz
Figure 10
Figure 11
TPS76633
OUTPUT IMPEDANCE
vs
FREQUENCY
1
0
10
V = 4.3 V
I
C
T
= 10 µF
= 25°C
O
A
10
I
O
= 1 mA
–1
10
10
I
O
= 250 mA
–2
10
100
1k
10k
100k
1M
f – Frequency – Hz
Figure 12
9
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TPS76615, TPS76618, TPS76625, TPS76627
TPS76628, TPS76630, TPS76633, TPS76650, TPS76601
ULTRA LOW QUIESCENT CURRENT 250-mA LOW-DROPOUT VOLTAGE REGULATORS
SLVS237 – AUGUST 1999
TYPICAL CHARACTERISTICS
TPS76650
DROPOUT VOLTAGE
vs
TPS76633
DROPOUT VOLTAGE
vs
FREE-AIR TEMPERATURE
FREE-AIR TEMPERATURE
0
0
10
10
V = 4.9 V
I
V = 3.2 V
I
I
O
= 250 mA
I
O
= 250 mA
I
= 150 mA
–1
10
–2
10
–3
10
–1
10
O
I
= 150 mA
O
I
O
= 50 mA
I
O
= 50 mA
I
O
= 10 mA
–2
10
I
O
= 10 mA
–3
10
–50 –25
0
25
50
75
100 125 150
–50 –25
0
25
50
75
100 125 150
T
A
– Free-Air Temperature – °C
T
A
– Free-Air Temperature – °C
Figure 13
Figure 14
TPS76615
TPS76615
LINE TRANSIENT RESPONSE
LOAD TRANSIENT RESPONSE
400
C
T
A
= 4.7 µF
= 25°C
L
100
50
0
200
0
C
T
A
= 4.7 µF
= 25°C
L
–200
–400
–50
250
3.7
2.7
0
0
100 200 300 400 500 600 700 800 900 1000
0
100 200 300 400 500 600 700 800 900 1000
t – Time – µs
t – Time – µs
Figure 15
Figure 16
10
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TPS76615, TPS76618, TPS76625, TPS76627
TPS76628, TPS76630, TPS76633, TPS76650, TPS76601
ULTRA LOW QUIESCENT CURRENT 250-mA LOW-DROPOUT VOLTAGE REGULATORS
SLVS237 – AUGUST 1999
TYPICAL CHARACTERISTICS
TPS76633
TPS76633
LINE TRANSIENT RESPONSE
LOAD TRANSIENT RESPONSE
400
C
T
= 4.7 µF
= 25°C
L
A
C
T
A
= 4.7 µF
= 25°C
L
100
50
200
0
0
–50
–200
250
0
–100
5.3
4.3
0
100 200 300 400 500 600 700 800 900 1000
0
100 200 300 400 500 600 700 800 900 1000
t – Time – µs
t – Time – µs
Figure 17
Figure 18
TPS76633
OUTPUT VOLTAGE
vs
TPS76601
DROPOUT VOLTAGE
vs
TIME (AT STARTUP)
INPUT VOLTAGE
4
0.60
0.50
0.40
0.30
0.20
0.10
0.00
I
O
= 250 mA
3
2
1
T
A
= 125°C
0
T
A
= 25°C
4.3
0
T
A
= –40°C
2.50
3.00
3.50
4.00
4.50
5.00
0
100 200 300 400 500 600 700 800 900 1000
t – Time – µs
V – Input Voltage – V
I
Figure 19
Figure 20
11
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TPS76615, TPS76618, TPS76625, TPS76627
TPS76628, TPS76630, TPS76633, TPS76650, TPS76601
ULTRA LOW QUIESCENT CURRENT 250-mA LOW-DROPOUT VOLTAGE REGULATORS
SLVS237 – AUGUST 1999
TYPICAL CHARACTERISTICS
TYPICAL REGION OF STABILITY
EQUIVALENT SERIES RESISTANCE
vs
TYPICAL REGION OF STABILITY
EQUIVALENT SERIES RESISTANCE
vs
†
†
OUTPUT CURRENT
OUTPUT CURRENT
2
2
10
10
Maximum ESR
Maximum ESR
Region of Instability
Region of Instability
1
1
10
10
Region of Stability
Region of Stability
V = 4.3 V
I
0
0
10
10
C
= 4.7 µF
= 3.3 V
= 25°C
O
O
A
V
T
V = 4.3 V
I
C
= 4.7 µF
= 3.3 V
O
O
Minimum ESR
Minimum ESR
V
T
–1
10
–1
10
= 125°C
A
Region of Instability
Region of Instability
150 200
–2
–2
10
10
0
50
100
150
200
250
0
50
100
250
I
O
– Output Current – mA
I
O
– Output Current – mA
Figure 21
Figure 22
TYPICAL REGION OF STABILITY
EQUIVALENT SERIES RESISTANCE
vs
TYPICAL REGION OF STABILITY
†
†
EQUIVALENT SERIES RESISTANCE
vs
OUTPUT CURRENT
OUTPUT CURRENT
2
1
0
2
10
10
10
10
Maximum ESR
Maximum ESR
Region of Instability
Region of Instability
1
10
Region of Stability
0
10
V = 4.3 V
I
O
V = 4.3 V
Region of Stability
Minimum ESR
I
O
O
A
C
V
= 10 µF
= 3.3 V
= 125°C
C
V
T
= 10 µF
= 3.3 V
= 25°C
O
A
T
–1
–1
10
10
10
Minimum ESR
Region of Instability
Region of Instability
–2
–2
10
0
50
100
150
200
250
0
50
100
150
200
250
I
O
– Output Current – mA
I
O
– Output Current – mA
Figure 23
Figure 24
†
Equivalent series resistance (ESR) refers to the total series resistance, including the ESR of the capacitor, any series resistance added
externally, and PWB trace resistance to C
.
O
12
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TPS76615, TPS76618, TPS76625, TPS76627
TPS76628, TPS76630, TPS76633, TPS76650, TPS76601
ULTRA LOW QUIESCENT CURRENT 250-mA LOW-DROPOUT VOLTAGE REGULATORS
SLVS237 – AUGUST 1999
TYPICAL CHARACTERISTICS
TYPICAL REGION OF STABILITY
EQUIVALENT SERIES RESISTANCE
vs
TYPICAL REGION OF STABILITY
EQUIVALENT SERIES RESISTANCE
vs
†
†
ADDED CERAMIC CAPACITANCE
ADDED CERAMIC CAPACITANCE
1
1
10
10
V = 4.3 V
V = 4.3 V
I
I
C
= 4.7 µF
= 3.3 V
= 250 mA
= 25°C
C
= 10 µF
= 3.3 V
= 250 mA
= 25°C
O
O
O
O
V
I
V
I
O
O
T
T
A
A
0
0
10
10
Region of Stability
Region of Stability
–1
10
–1
10
Minimum ESR
Minimum ESR
0.2
Region of Instability
Region of Instability
0.6 0.8
–2
10
–2
10
0
0.2
0.4
0.6
0.8
1.0
0
0.4
1.0
Added Ceramic Capacitance – µF
Added Ceramic Capacitance – µF
Figure 25
Figure 26
To Load
IN
V
I
OUT
+
C
O
R
EN
L
GND
ESR
Figure 27. Test Circuit for Typical Regions of Stability (Figures 21 through 24) (Fixed Output Options)
†
Equivalent series resistance (ESR) refers to the total series resistance, including the ESR of the capacitor, any series resistance added
externally, and PWB trace resistance to C
.
O
13
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TPS76615, TPS76618, TPS76625, TPS76627
TPS76628, TPS76630, TPS76633, TPS76650, TPS76601
ULTRA LOW QUIESCENT CURRENT 250-mA LOW-DROPOUT VOLTAGE REGULATORS
SLVS237 – AUGUST 1999
APPLICATION INFORMATION
The TPS766xx family includes eight fixed-output voltage regulators (1.5 V, 1.8 V, 2.5 V, 2.7 V, 2.8 V, 3.0 V,
3.3 V, and 5.0 V), and an adjustable regulator, the TPS76601 (adjustable from 1.25 V to 5.5 V).
device operation
The TPS766xx features very low quiescent current, which remains virtually constant even with varying loads.
Conventional LDO regulators use a pnp pass element, the base current of which is directly proportional to the
load current through the regulator (I = I /β). The TPS766xx uses a PMOS transistor to pass current; because
B
C
the gate of the PMOS is voltage driven, operating current is low and invariable over the full load range.
Another pitfall associated with the pnp-pass element is its tendency to saturate when the device goes into
dropout. The resulting drop in β forces an increase in I to maintain the load. During power up, this translates
B
to large start-up currents. Systems with limited supply current may fail to start up. In battery-powered systems,
it means rapid battery discharge when the voltage decays below the minimum required for regulation. The
TPS766xx quiescent current remains low even when the regulator drops out, eliminating both problems.
The TPS766xx family also features a shutdown mode that places the output in the high-impedance state
(essentially equal to the feedback-divider resistance) and reduces quiescent current to 1 µA (typ). If the
shutdown feature is not used, EN should be tied to ground. Response to an enable transition is quick; regulated
output voltage is reestablished in typically 160 µs.
minimum load requirements
The TPS766xx family is stable even at zero load; no minimum load is required for operation.
FB - pin connection (adjustable version only)
The FB pin is an input pin to sense the output voltage and close the loop for the adjustable option . The output
voltage is sensed through a resistor divider network to close the loop as it is shown in Figure 29. Normally, this
connection should be as short as possible; however, the connection can be made near a critical circuit to
improve performance at that point. Internally, FB connects to a high-impedance wide-bandwidth amplifier and
noise pickup feeds through to the regulator output. Routing the FB connection to minimize/avoid noise pickup
is essential.
external capacitor requirements
An input capacitor is not usually required; however, a ceramic bypass capacitor (0.047 µF or larger) improves
load transient response and noise rejection if the TPS766xx is located more than a few inches from the power
supply. A higher-capacitance electrolytic capacitor may be necessary if large (hundreds of milliamps) load
transients with fast rise times are anticipated.
Like all low dropout regulators, the TPS766xx requires an output capacitor connected between OUT and GND
to stabilize the internal control loop. The minimum recommended capacitance value is 4.7 µF and the ESR
(equivalent series resistance) must be between 300-mΩ and 20-Ω. Capacitor values 4.7 µF or larger are
acceptable, provided the ESR is less than 20Ω. Solidtantalumelectrolytic, aluminumelectrolytic, andmultilayer
ceramic capacitors are all suitable, provided they meet the requirements described previously.
14
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TPS76615, TPS76618, TPS76625, TPS76627
TPS76628, TPS76630, TPS76633, TPS76650, TPS76601
ULTRA LOW QUIESCENT CURRENT 250-mA LOW-DROPOUT VOLTAGE REGULATORS
SLVS237 – AUGUST 1999
APPLICATION INFORMATION
external capacitor requirements (continued)
TPS766xx
5
6
2
1
7
8
V
IN
IN
PG
PG
I
NC/FB
250 kΩ
OUT
OUT
V
O
4
0.1 µF
EN
C
O
+
4.7 µF
GND
3
300 mΩ
Figure 28. Typical Application Circuit (Fixed Versions)
programming the TPS76601 adjustable LDO regulator
The output voltage of the TPS76601 adjustable regulator is programmed using an external resistor divider as
shown in Figure 29. The output voltage is calculated using:
R1
R2
(1)
V
V
1
O
ref
Where
V
= 1.224 V typ (the internal reference voltage)
ref
Resistors R1 and R2 should be chosen for approximately 7-µA divider current. Lower value resistors can be
used but offer no inherent advantage and waste more power. Higher values should be avoided as leakage
currents at FB increase the output voltage error. The recommended design procedure is to choose
R2 = 169 kΩ to set the divider current at 7 µA and then calculate R1 using:
V
O
R1
1
R2
(2)
V
ref
OUTPUT VOLTAGE
PROGRAMMING GUIDE
TPS76601
OUTPUT
VOLTAGE
R1
R2
UNIT
V
I
IN
PG
OUT
PG
0.1 µF
≤ 0.8 V
2.5 V
3.3 V
3.6 V
4.0 V
5.0 V
174
287
324
383
523
169
169
169
169
169
kΩ
kΩ
kΩ
kΩ
kΩ
250 kΩ
≥ 2.0 V
EN
V
O
R1
R2
C
O
FB / NC
GND
300 mΩ
Figure 29. TPS76601 Adjustable LDO Regulator Programming
15
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TPS76615, TPS76618, TPS76625, TPS76627
TPS76628, TPS76630, TPS76633, TPS76650, TPS76601
ULTRA LOW QUIESCENT CURRENT 250-mA LOW-DROPOUT VOLTAGE REGULATORS
SLVS237 – AUGUST 1999
APPLICATION INFORMATION
power-good indicator
The TPS766xx features a power-good (PG) output that can be used to monitor the status of the regulator. The
internal comparator monitors the output voltage: when the output drops to between 92% and 98% of its nominal
regulated value, the PG output transistor turns on, taking the signal low. The open-drain output requires a pullup
resistor. If not used, it can be left floating. PG can be used to drive power-on reset circuitry or used as a
low-battery indicator.
regulator protection
The TPS766xx PMOS-pass transistor has a built-in back diode that conducts reverse currents when the input
voltage drops below the output voltage (e.g., during power down). Current is conducted from the output to the
input and is not internally limited. When extended reverse voltage is anticipated, external limiting may be
appropriate.
The TPS766xx also features internal current limiting and thermal protection. During normal operation, the
TPS766xx limits output current to approximately 0.8 µA (typ). When current limiting engages, the output voltage
scales back linearly until the overcurrent condition ends. While current limiting is designed to prevent gross
device failure, care should be taken not to exceed the power dissipation ratings of the package. If the
temperature of the device exceeds 150°C(typ), thermal-protection circuitry shuts it down. Once the device has
cooled below 130°C(typ), regulator operation resumes.
power dissipation and junction temperature
Specified regulator operation is assured to a junction temperature of 125°C; the maximum junction temperature
should be restricted to 125°C under normal operating conditions. This restriction limits the power dissipation
the regulator can handle in any given application. To ensure the junction temperature is within acceptable limits,
calculate the maximum allowable dissipation, P
, and the actual dissipation, P , which must be less than
D(max)
D
or equal to P
.
D(max)
The maximum-power-dissipation limit is determined using the following equation:
T max
J
T
A
P
D(max)
R
JA
Where
T max is the maximum allowable junction temperature
J
R
SOIC.
is the thermal resistance junction-to-ambient for the package, i.e., 176°C/W for the 8-terminal
θJA
T is the ambient temperature.
A
The regulator dissipation is calculated using:
P
V
V
I
D
I
O
O
Power dissipation resulting from quiescent current is negligible. Excessive power dissipation will trigger the
thermal protection circuit.
16
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TPS76615, TPS76618, TPS76625, TPS76627
TPS76628, TPS76630, TPS76633, TPS76650, TPS76601
ULTRA LOW QUIESCENT CURRENT 250-mA LOW-DROPOUT VOLTAGE REGULATORS
SLVS237 – AUGUST 1999
MECHANICAL DATA
D (R-PDSO-G**)
PLASTIC SMALL-OUTLINE PACKAGE
14 PIN SHOWN
PINS **
0.050 (1,27)
8
14
16
DIM
0.020 (0,51)
0.014 (0,35)
0.010 (0,25)
0.197
(5,00)
0.344
(8,75)
0.394
(10,00)
M
A MAX
14
8
0.189
(4,80)
0.337
(8,55)
0.386
(9,80)
A MIN
0.244 (6,20)
0.228 (5,80)
0.008 (0,20) NOM
0.157 (4,00)
0.150 (3,81)
Gage Plane
1
7
A
0.010 (0,25)
0°–8°
0.044 (1,12)
0.016 (0,40)
Seating Plane
0.004 (0,10)
0.010 (0,25)
0.004 (0,10)
0.069 (1,75) MAX
4040047/B 03/95
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion, not to exceed 0.006 (0,15).
D. Four center pins are connected to die mount pad.
E. Falls within JEDEC MS-012
17
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue
any product or service without notice, and advise customers to obtain the latest version of relevant information
to verify, before placing orders, that information being relied on is current and complete. All products are sold
subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those
pertaining to warranty, patent infringement, and limitation of liability.
TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent
TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily
performed, except those mandated by government requirements.
CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF
DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL
APPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR
WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER
CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO
BE FULLY AT THE CUSTOMER’S RISK.
In order to minimize risks associated with the customer’s applications, adequate design and operating
safeguards must be provided by the customer to minimize inherent or procedural hazards.
TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent
that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other
intellectual property right of TI covering or relating to any combination, machine, or process in which such
semiconductor products or services might be or are used. TI’s publication of information regarding any third
party’s products or services does not constitute TI’s approval, warranty or endorsement thereof.
Copyright 1999, Texas Instruments Incorporated
相关型号：
TPS76615PWR
IC VREG 1.5 V FIXED POSITIVE LDO REGULATOR, PDSO8, Fixed Positive Single Output LDO Regulator
TI
©2020 ICPDF网 联系我们和版权申明