TSB42AC3PZTG4 [TI]
High Performance 1394-1995 Link Layer for Industrial and Bridge applications 100-TQFP 0 to 70;
| 型号： | TSB42AC3PZTG4 |
| 厂家： | 
TEXAS INSTRUMENTS |
| 描述： | High Performance 1394-1995 Link Layer for Industrial and Bridge applications 100-TQFP 0 to 70 通信 时钟 数据传输 外围集成电路 |
| 文件： | 总2页 (文件大小：31K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
TSB42AC3
www.ti.com
SLLA220–JUNE 2006
Overview of TSB42AC3
The TSB42AC3 has a 32-bit, 50-MHz host interface,
which makes connection to most 32-bit hosts fairly
easy. The LLC also provides the capability to receive
status from the PHY and to access the PHY control
and status registers by the application software.
FEATURES
•
50-MHz Host Interface Frequency Allows
Direct Connection to Host With Bus Speeds
up to 50 MHz
•
Programmable 10K Byte Total for
Asynchronous, Isochronous, and General
Receive FIFO
An internal 10K-byte memory is provided that can be
configured as multiple variable-size FIFOs and
eliminates the need for external FIFOs. Separate
FIFOs can be user configured to support
asynchronous transmit, isochronous transmit, and
general 1394 receive transfer operations. These
functions are accomplished by appropriately sizing
the asynchronous transmit FIFO (ATF) and
isochronous transmit FIFO (ITF). Once the ATF and
ITF size are programmed, the remaining memory
space is assigned to the general receive FIFO
(GRF).
•
•
Separate ACK FIFO Register Decreases
ACK-tracking Burden on the Host
Additional Programmable Status Output to
Pins, Including cd and paccom Bits to Aid
External DMA
•
•
Supports 1394 Transfer Rates of 100, 200,
and 400 Mbit/s in Cable Environment
Supports 1394 Transfer Rates of 50 and 100
Mbit/s in Backplane Environment
The TSB42AC3 has a separate ACK FIFO register
that is capable of retaining up to six acknowledges
returned by external nodes in response to the
asynchronous packets transmitted from the
TSB42AC3. This allows host software to load
multiple asynchronous packets in the ATF, then
return at a later time to retrieve and process the
•
•
Generic 32-Bit Host Bus Interface
Completely Software Compatible With the
TSB12LV01B
•
IEEE 1149.1 JTAG Interface to Support Board
Level Scan Testing
acknowledges
destination nodes.
returned
from
the
receiving
•
•
Operates from a 3.3-V Power Supply
Support Provisions of IEEE 1394–1995 (1394)
Standard for High-Performance Serial Bus
New status bits were added to the programmable
output status pins. The start/end of packet bit (cd bit)
and the packet complete (paccom bit) may now be
brought out to a pin for control of external hardware.
•
High Performance 100-Pin TQFP Package
DESCRIPTION
The TSB42AC3 is a 1394-1995 general purpose link
layer ideal for a wide-range of applications, including
motion control, motor control, video, and process
control. The TSB42AC3 provides a high-performance
interface with the capability of transferring data
between the 32-bit host controller and the 1394
PHY-link interface. The 1394 PHY-link interface
provides the connection to the 1394 physical layer
device (PHY) and is supported by the link-layer
controller (LLC). The LLC provides the control for
transmitting and receiving 1394 packet data between
the FIFO and PHY-link interface at rates of 50
(backplane only), 100, 200, and 400 Mbit/s.
NOTE:
This
product
high-volume applications
is
for
only. For
datasheet
information
a
or
complete
more
contact
support@ti.com.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Copyright © 2006, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Applications
Audio
www.ti.com/audio
amplifier.ti.com
dataconverter.ti.com
www.dlp.com
Communications and Telecom www.ti.com/communications
Amplifiers
Data Converters
DLP® Products
DSP
Computers and Peripherals
Consumer Electronics
Energy and Lighting
Industrial
www.ti.com/computers
www.ti.com/consumer-apps
www.ti.com/energy
dsp.ti.com
www.ti.com/industrial
www.ti.com/medical
www.ti.com/security
Clocks and Timers
Interface
www.ti.com/clocks
interface.ti.com
logic.ti.com
Medical
Security
Logic
Space, Avionics and Defense www.ti.com/space-avionics-defense
Power Mgmt
power.ti.com
Transportation and
Automotive
www.ti.com/automotive
Microcontrollers
RFID
microcontroller.ti.com
www.ti-rfid.com
Video and Imaging
Wireless
www.ti.com/video
www.ti.com/wireless-apps
RF/IF and ZigBee® Solutions www.ti.com/lprf
TI E2E Community Home Page
e2e.ti.com
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2011, Texas Instruments Incorporated
相关型号：
TSB43AA82AIPGEEP
Enhanced Product 1394 Integrated Phy And Link-Layer Controller 144-LQFP -40 to 85
TI
©2020 ICPDF网 联系我们和版权申明