WL1271-TIWI_14 [TI]
WLAN 802.11 b/g/n and Bluetooth® v2.1 EDR Module;
| 型号： | WL1271-TIWI_14 |
| 厂家： | 
TEXAS INSTRUMENTS |
| 描述： | WLAN 802.11 b/g/n and Bluetooth® v2.1 EDR Module 局域网 WLAN 无线局域网 |
| 文件： | 总2页 (文件大小：38K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
WL1271-TiWi
www.ti.com
SWRS100A –JANUARY 2011–REVISED MARCH 2011
WLAN 802.11 b/g/n and Bluetooth® v2.1 + EDR Module
1
FEATURES
APPLICATIONS
•
•
•
•
•
•
Consumer Devices
2345
•
IEEE 802.11 b/g/n Compliant
Typical WLAN Transmit power:
Industrial and Home Automation
Point of Sale and Point of Purchase
Video Conferencing, Video Camera and VoIP
Medical Devices
•
–
–
–
+20dBm, 11Mbps, CCK (b)
+14.5dBm, 54Mbps, OFDM (g)
+12.5dBm, 65Mbps, OFDM (n)
Security and Surveillance
•
Typical WLAN Receiver sensitivity:
–
–
–
–89dBm, 8% PER, 11Mbps
–76dBm, 10% PER, 54Mbps
–73dBm, 10% PER, 65Mbps
DESCRIPTION
The following product brief applies to LS Research’s
WLAN + Bluetooth module, series name: TiWi. The
WLAN + Bluetooth chip used is the WL1271 from
Texas Instruments.
•
•
Bluetooth v2.1 + Enhanced Data Rate (EDR)
Increased Bluetooth Transmit Power:
+9.5dBm Typical
The WL1271-TiWi is
a
fully-integrated high
•
•
-92dBm typical Bluetooth® Receiver Sensitivity
performance module offered by LS Research using
TI’s single-chip WL1271 2.4GHz IEEE 802.11 b/g/n
and Bluetooth v2.1 + Enhanced Data Rate (EDR)
Transceiver. Based on TI’s 6th generation WLAN
technology and 7th generation Bluetooth technology,
the solution provides best-in-class coexistence
capabilities coupled with TI’s Enhanced Low Power
(ELP) technology. The WL1271-TiWi is provided as a
module to help customers reduce development time,
lower manufacturing costs, save board space, ease
certification, and minimize RF expertise required. For
evaluation and development, various platforms are
available which integrate the WL1271-TiWi module,
Linux WLAN drivers, BlueZ Bluetooth stack, and
sample source applications running on a TI host
processor (AM/DM37x, AM18x, OMAP4).
Best-In-Class WLAN and Bluetooth
Coexistence Technology on a Single-Chip
•
•
•
Enhanced Low Power (ELP™) Technology for
Extended Battery Life
On Board TCXO, Power Regulation and U.FL
Antenna Connector
Hardware and Software Pre-integration With
TI's AM/DM37x (ARM Cortex™-A8), AM18xx
(ARM9), and OMAP4™ (ARM Cortex™-A9)
Platforms
•
Software Upgradable for ANT and Bluetooth
Low Energy
•
•
•
Dimensions: 13mm x 18mm x 1.9mm
FCC/IC/CE Certified
The full specification and purchasing of the
WL1271-TiWi module can be found on LSR's website
(www.lsr.com/tiwi). More information on TI’s wireless
platform solutions can be found on the Wireless
Connectivity Wiki (www.ti.com/connectivitywiki).
Operating Temperature Range: –40°C to 85°C
Disclaimer:
All content in and linked to this product brief is provided by TI "AS IS" without express or implied warranties of
any kind, and it may contain errors, omissions and technical inaccuracies. TI does not endorse or warrant any of
the third party products or services referenced on this product brief. This information is provided subject to TI’s
Terms of Use.
Be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
3
4
5
OMAP4 is a trademark of Texas Instruments.
Cortex is a trademark of ARM.
Bluetooth is a registered trademark of Bluetooth SIG, Inc.
All other trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2011, Texas Instruments Incorporated
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Applications
Audio
www.ti.com/audio
amplifier.ti.com
dataconverter.ti.com
www.dlp.com
Communications and Telecom www.ti.com/communications
Amplifiers
Data Converters
DLP® Products
DSP
Computers and Peripherals
Consumer Electronics
Energy and Lighting
Industrial
www.ti.com/computers
www.ti.com/consumer-apps
www.ti.com/energy
dsp.ti.com
www.ti.com/industrial
www.ti.com/medical
www.ti.com/security
Clocks and Timers
Interface
www.ti.com/clocks
interface.ti.com
logic.ti.com
Medical
Security
Logic
Space, Avionics and Defense www.ti.com/space-avionics-defense
Power Mgmt
power.ti.com
Transportation and
Automotive
www.ti.com/automotive
Microcontrollers
RFID
microcontroller.ti.com
www.ti-rfid.com
Video and Imaging
Wireless
www.ti.com/video
www.ti.com/wireless-apps
RF/IF and ZigBee® Solutions www.ti.com/lprf
TI E2E Community Home Page
e2e.ti.com
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2011, Texas Instruments Incorporated
相关型号：
©2020 ICPDF网 联系我们和版权申明