HI82D1BW10GMI [TOKEN]
Ultra-Precision High Voltage Film Resistors;型号: | HI82D1BW10GMI |
厂家: | TOKEN ELECTRONICS INDUSTRY CO., LTD. |
描述: | Ultra-Precision High Voltage Film Resistors |
文件: | 总11页 (文件大小:920K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Version:
November 22, 2017
(HI82)Ultra-Precision
HighVoltageFilm
Resistors
Token Electronics Industry Co., Ltd.
Web: www.token.com.tw
mailto:rfq@token.com.tw
Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District,
New Taipei City, Taiwan, R.O.C. 24872
Tel: +886 2981 0109
Fax: +886 2988 7487
China: 12F, Zhong Xing Industry Bld., Chuang Ye Road,
Nan Shan District, Shen Zhen City,
Guang Dong, China 518054
Tel: +86 755 26055363; Fax: +86 755 26055365
Product Introduction
Up to 10TΩ, (HI82) sets a new standard for high value,
ultra-stable precision high voltage resistors.
(HI82) Family Members:
(HI82D) Precision High-Voltage High-Value Resistor series, resistance range from 1mΩ to 10TΩ,
precision tolerance from 30% to 0.25%, rated power has 1w/1.2w/3w selectable.
(HI82H) Conventional Precision High-Voltage High Resistance Resistor series, various precision
tolerance 1%/2%/5%/10%/20%/30%/50% available, four kinds of rated power 0.5w/0.7/1w/2w
selectable, resistance from 1MΩ to 1TΩ.
(HI82T) High Power Voltage Resistor series, maximum operating voltage up to 35KV, 30W high
rated power to 0.125W, resistance range from 1Ω to 500MΩ, tolerance range 0.5% to 5%.
Features :
High voltage thick film precision technology resistor.
Resistance up to 10TΩ. Low TCR, low VCR.
Radial leads, variable lead spacing by bending.
Climatic protection by silicone coating
Applications :
Impulse voltage generators,
Arc furnace damping, Energy research,
Pulse modulators, Radar Pulse-forming networks,
Capacitor crowbar circuits, High voltage snubber circuits,
The high performance high-voltage applications require the
use of high voltage resistors in applications with long-term
stability and good temperature coefficient. Token Electronics
has introduced ultra-stable high-precision HI82 high voltage
resistors to meet these needs.
Token's unique precision full film and serpentine transfer
pattern (serpentine patterns design), using a specifical high
speed fine-line thick film dispensing system, developed a
series of high voltage application resistor components with
excellent performance.Especially in smaller sizes and higher resistance-value components.
Through the use of alloy ruthenium paste material, and 95% high aluminum planar ceramic chip,
Token can control the manufacture of very precise precision and stabilize the performance parameters
of important high-voltage operating temperature range. (HI82) thick film resistor combined with close
tracking design, with low current noise, linear current voltage, low TCR, high temperature durability,
wide resistance range, long-term stability, and low-cost advantages.
Token HI82 ultra-precision high-voltage resistors conform with RoHS and lead-free standards and
provide more competitive prices and fast delivery service. For technical specifications and special
applications, please contact your Token's sales representative, or link to Token official website "High
Voltage Resistors" to get more information.
Page: 1/10
Dimensions
Composition Structure (HI82)
Membrane Material
(a)
Ruthenium Paste
95% Aluminum
Oxide, Al2O3
Base Material (b)
High Temperature
Silicone Resin
Encapsulating
Material (c)
Page: 2/10
Ultra-precision high value voltage Resistor Dimensions (Unit: mm)
HI82D Ultra-precision high-voltage high-value resistor
Part Number
HI82D-1W
HI82D-1BW
HI82D-3W
L ±1mm
30.0
40.0
H ±1mm
6.0
6.0
T ±0.5mm
P ±2mm
27.5
37.8
I ±3mm
d ±0.1mm
1.4
1.4
1.4
20
20
20
0.4
0.4
0.4
50.0
12.5
47.8
Note: L = Length, H = Width, T = Thickness, I = Length of steel wire, d = Wire diameter。
P = Standard lead spacing ( Other spacing possible by bending )。
HI82H Conventional precision high-voltage high-resistance resistor
Part Number
HI82H-05W
HI82H-07W
HI82H-1W
HI82H-2W
L ±1mm
3.2
3.8
6.3
10.2
H ±1mm
2.5
5.0
3.5
5.1
T ±0.5mm
P ±2mm
2.0
2.5
5.5
9.5
I ±3mm
d ±0.1mm
0.9
1.0
1.0
1.0
20
20
20
20
0.4
0.4
0.4
0.4
Note: L = Length, H = Width, T = Thickness, I = Length of steel wire, d = Wire diameter。
P = Standard lead spacing ( Other spacing possible by bending )。
HI82T High-power voltage resistor
Part Number
HI82T-0125W
HI82T-025W
HI82T-04W
HI82T-05W
HI82T-1W
HI82T-2SW
HI82T-2NW
HI82T-2BW
HI82T-3W
L ± 1mm
8
10
25
35
30
25
22
45
60
80
97
100
100
H ± 1mm
3.5
5
5
5
8
10
18
10
10
20
23
35
48
T ± 0.5mm
P ± 2mm
5.7
7.7
22.5
32
27
I ± 3mm
10
10
20
20
20
20
20
20
20
40
40
40
d ± 0.1mm
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.8
0.8
1.0
1.0
1.0
2
2
2
2
2
2
2
3
3
4
4
4
4
22
19
41.5
56.5
76.5
93.5
96.5
96.5
HI82T-5W
HI82T-10W
HI82T-20W
HI82T-30W
40
1.0
Note: L = Length, H = Width, T = Thickness, I = Length of steel wire, d = Wire diameter。
P = Standard lead spacing ( Other spacing possible by bending )。
Ultra-precision high value voltage Resistor Dimensions (Unit: mm)
Page: 3/10
HI82D Electrical Charcs.
Technical Characteristics - (HI82D)
Working
Voltage Max.
(V)
TCR(1) (ppm/
Power Rating
Resistance
Range (Ω)
VCR(2)
(ppm/V)
Part Number
HI82D-1W
Tolerance (%)
℃)
P70(W)
1M - 100M
100M - 1G
1G - 100G
100G - 1T
1M - 100M
100M - 1G
1G - 100G
100G - 1T
1M - 100M
100M - 1G
1G - 100G
100G - 1T
1T - 10T
0.25/0.5/5/10
1/2/5/10/20
5/10/20/30
5/10/20/30
0.25/0.5/5/10
1/2/5/10/20
5/10/20/30
5/10/20/30
0.25/0.5/5/10
1/2/5/10/20
5/10/20/30
5/10/20/30
10/20/30
25/50/100
50/100/250
250/500
500/1000
25/50/100
50/100/250
250/500
500/1000
25/50/100
25/50/100
100/250
2ppm/V
5ppm/V
20ppm/V
100ppm/V
1ppm/V
1.0
10KV
2ppm/V
1.2
3.0
20KV
HI82D-1BW
HI82D-3W
10ppm/V
50ppm/V
1ppm/V
1ppm/V
5ppm/V
30KV
250/500
500/1000
25ppm/V
100ppm/V
Note:
(1) TCR 25/50: Temperature range +25℃ ~ +85℃; (2) The voltage coefficient is measured between 10V and 100V.
Operating Voltage = ( 퐏 ∗ 퐑 ) , or Max. Operating Voltage listed in above table whichever is lower.
√
Optional specifications on request.
Environmental Characteristic
V = ( P ∗ R ) , or Max. Operating Voltage listed in above table whichever
is lower.
√
Continuous operating voltage
Standard measuring voltage is 10V (50V for values >1G).
Different voltages on request.
Measuring voltage
Temperature range +25℃ ~ +125℃
TCR ppm/℃
TCR25/50
Values above 1G: +25℃ ~ +85℃.
-55℃ ~ +125℃
Operating temp. range
55/125/56
Climatic category to EN 60068-1
Lacquer coating. Resistant to most solvents. Isopropyl alcohol recommended
for cleaning;
Humidity-/contact protection
Do not use acetone or methylene choloride. Avoid mechanical stress to
coating.
≤10G
<1%
≤10G
<1%
>10G
<2%
>10G
<2%
Stability: Storage 125℃/1000Hrs
Stability at Max. voltage/1000Hrs
Page: 4/10
HI82H Electrical Charcs.
Technical Characteristics - (HI82H)
Working Voltage
Part
Number
Power Rating
P70(W)
Max. (V)
Resistance
Range (Ω)
Tolerance
(%)
VCR(2)
(ppm/V)
TCR(1) (ppm/℃)
trimmed untrimmed
1M - 100M
>100M - 500M 2/5/10/20
>500M - 1G
>1G - 10G
>10G - 100G 5/10/20/30
>100G - 1T
1M - 100M
>100M - 500M
>500M - 1G
>1G - 10G
>10G - 100G
>100G - 1T
1M - 100M
>100M - 500M 1/2/5/10/20
>500M - 1G 1/2/5/10/20
>1G - 10G
>10G - 100G 5/10/20/30
>100G - 1T 10/20/30/50
1M - 100M
>100M - 500M 1/2/5/10/20
>500M - 1G 1/2/5/10/20
>1G - 10G
>10G - 100G 5/10/20/30
>100G - 1T 5/10/20/30
1/2/5/10
TC25/50/100
TC50/100/250
TC100/250
TC250/500
TC500/1000
-
<50ppm/V
<100ppm/V
<100ppm/V
<500ppm/V
<1000ppm/V
-
<50ppm/V
<100ppm/V
<100ppm/V
<500ppm/V
<1000ppm/V
-
<10ppm/V
<25ppm/V
<25ppm/V
<100ppm/V
<250ppm/V
<500ppm/V
<5ppm/V
<10ppm/V
<10ppm/V
<25ppm/V
<100ppm/V
<250ppm/V
5/10/20
5/10/20/30
0.5
0.7
1.0
2.0
300
300
1000
500
HI82H-05W
HI82H-07W
HI82H-1W
-
2/5/10
5/10/20
5/10/20
10/20/30
10/20/30
-
TC50/100
TC100/250
TC100/250
TC250/500
TC500/1000
-
TC25/50/100
TC25/50/100
TC100/250
TC100/250
TC250/500
TC500/1000
TC25/50/100
TC25/50/100
TC25/50/100
TC50/100
1/.../10
1200
4000
2500
6000
2/5/10/20
1/.../10
HI82H-2W
Note:
2/5/10/20
TC100/250
TC250/500
(1) TCR 25/50: Temperature range +25℃ ~ +85℃; (2) The voltage coefficient is measured between 10V and 100V.
Operating Voltage = ( 퐏 ∗ 퐑 ) , or Max. Operating Voltage listed in above table whichever is lower.
√
Optional specifications on request.
Environmental Characteristic
V = ( P ∗ R ) , or Max. Operating Voltage listed in above table
whichever is lower.
√
Continuous Operating Voltage
Standard measuring voltage is 10V (50V for values >1G).
Different voltages on request.
Measuring Voltage
Temperature range +25℃ ~ +125℃
TCR ppm/℃
TCR25/50
Values above 1G: +25℃ ~ +85℃.
-55℃ ~ +125℃
55/125/56
Operating Temperature Range
Climatic Category to EN 60068-1
Lacquer coating. Resistant to most solvents. Isopropyl alcohol
recommended for cleaning;
Do not use acetone or methylene choloride. Avoid mechanical stress to
coating.
Humidity-/Contact Protection
≤1G
<1%
≤1G
≤10G
<2%
≤10G
<1%
>10G
<5%
>10G
<2%
Stability: Storage 125℃/1000Hrs.
Stability at Max. voltage/1000Hrs.
<0.5%
Page: 5/10
HI82T Electrical Charcs.
Technical Characteristics - (HI82T)
Power Rating
P75(W)
Working Voltage Resistance Range
Part Number
Tolerance (%)
TCR
Max. (V)
(Ω)
1/8W
1/4W
2/5W
1/2W
1W
2KV
1 ~ 500M
1 ~ 500M
1 ~ 500M
1 ~ 500M
1 ~ 500M
1 ~ 500M
1 ~ 500M
1 ~ 500M
1 ~ 500M
1 ~ 500M
1 ~ 500M
1 ~ 500M
1 ~ 500M
HI82T-0125W
HI82T-025W
HI82T-04W
HI82T-05W
HI82T-1W
4KV
10KV
15KV
15KV
20KV
20KV
20KV
25KV
30KV
35KV
35KV
35KV
2W
HI82T-2SW
HI82T-2NW
HI82T-2BW
HI82T-3W
±100ppm/℃
2W
±0.5% ~ ±5%
2W
3W
5W
HI82T-5W
10W
20W
30W
HI82T-10W
HI82T-20W
HI82T-30W
Note :
TCR @25℃ (25℃ ~ +105℃). TCR ±15ppm/℃ on request.
Operating Voltage = ( 퐏 ∗ 퐑 ) , or Max. Operating Voltage listed in above table whichever is lower.
√
Optional specifications on request.
Environmental Characteristic
V = ( P ∗ R ) , or Max. Operating Voltage listed in above table
whichever is lower.
√
Continuous Operating Voltage
Standard measuring voltage is 10V (50V for values >1G).
Different voltages on request.
Measuring Voltage
Temperature range +25℃~+105℃
TCR ppm/℃
TCR 25/50
Values above 1G: +25℃~+105℃.
-55℃ ~ +225℃
55/125/56
1000VDC
≥ 10GΩ
Operating Temperature Range
Climatic Category to EN 60068-1
Insulation withstand voltage
Insulation resistance
Lacquer coating. Resistant to most solvents. Isopropyl alcohol
recommended for cleaning;
Do not use acetone or methylene choloride. Avoid mechanical stress to
Humidity-/Contact Protection
coating.
≤1G
<1%
≤1G
≤10G
<2%
≤10G
<1%
>10G
<5%
>10G
<2%
Stability: Storage 125℃/1000Hrs.
Stability at Max. voltage/1000Hrs.
<0.5%
Page: 6/10
Power Derating Curve
Power Derating Curve - (HI82D & HI82H)
Power Derating Curve - (HI82T)
Page: 7/10
Advance Technique
Advance Technique of Non-Inductive & Serpentine Pattern (HI82)
Non-Inductive Performance:
HI82 Non-Inductive Design which uses a serpentine resistive pattern
that offers for zigzagging lines to carry current in opposite directions,
thereby achieving maximum neutralization of flux fields over the entire
length of the resistor.
This efficient non-inductive construction without derating of any
performance advantages is ideal for applications where high frequency
is required.
Serpentine Pattern Screen Printing Design:
Type High Voltage HI82 Precision Resistors combine Token's Non-Inductive serpentine pattern, high
thru-put screen printed silicone coating.
The alignment of the gap in the serpentine resistor pattern with the gap in the coating pattern provides a
complete encapsulation of the resistor element.
The cap and lead assemblies are pressed onto the resistor core, finishing the resistor and providing rugged
terminal attachment.
Page: 8/10
Order Codes
Order Codes (HI82D) - Ultra-Precision High-Voltage High Value Resistors
HI82D
1W
1G
F
E
Part Number
HI82D
Rated Power (W) Resistance Value (Ω)
Resistance Tolerance
(%)
TCR (ppm/℃)
1W
1BW
3W
1.0W
1.2W
3.0W
1M1
110M
1G5
1.1MΩ
110MΩ
1.5GΩ
10GΩ
±25ppm/℃
±50ppm/℃
C
D
E
L
I
C
D
F
±0.25%
±0.5%
±1%
±100ppm/℃
±250ppm/℃
±500ppm/℃
±1000ppm/℃
10G
J
±5%
K
M
N
±10%
±20%
±30%
R
Order Codes (HI82H) - Conventional Precision High-Voltage High-Resistance
Resistors
HI82H
2W
1G
F
E
Part Number
HI82H
Rated Power (W) Resistance Value (Ω)
Resistance Tolerance
(%)
TCR (ppm/℃)
±25ppm/℃
05W
07W
1W
0.5W
0.7W
1.0W
2.0W
1M1
110M
1G5
10G
1T
1.1MΩ
110MΩ
1.5GΩ
10GΩ
1TΩ
C
D
E
L
I
F
G
J
±1%
±2%
±50ppm/℃
±100ppm/℃
±250ppm/℃
±500ppm/℃
±1000ppm/℃
±5%
2W
K
M
N
±10%
±20%
±30%
R
Order Codes (HI82T) - High-Power Voltage Resistors
HI82T
30W
500M
F
E
Part Number
HI82T
Rated Power (W) Resistance Value (Ω)
Resistance Tolerance
(%)
TCR (ppm/℃)
0125W 1/8W
10
10Ω
E
±100ppm/℃
D
F
J
±0.5%
±1%
04W
2BW
10W
30W
2/5W
2W
1M1
110M
500M
1.1MΩ
110MΩ
500MΩ
±15ppm/℃
on request
C5
±5%
10W
30W
Note: If no requirements for TCR, (HI82D), (HI82H) and (HI82T) measuring voltage and taping are given, the standard
value(highest value in table) will be supplied, measuring voltage of 10V.
Page: 9/10
General Information
Cost Effective Complete Selection of High Voltage Components
Token high voltage series can be specified for use in industrial and general purpose high voltage systems,
as well as a complete selection of high resistance, Hi-Meg, high-voltage, high frequency, and bulk
ceramic resistors for higher average power dissipation. These High Resistance, High Frequency, High
Resistance resistors combine the proven performance of Token resistance system with new cost efficient
design elements and high voltage applications.
Detailed specifications, both mechanical and electrical, please contact our sales representative for more
information.
High Voltage Applications
Resistors produced from Serpentine Pattern Screen Printing Design or bulk ceramic materials have
displayed several key advantages in demanding high-voltage situations, including both continuous-wave
and pulse applications. These include radar and broadcast transmitters, x-ray systems, defibrillators,
lasers, and high-voltage semiconductor process equipment applications, where resistors must handle
peak voltage anywhere from 8KV to 75KV.
Typical applications include current limit in capacitor charge/discharge, crowbar, and tube-arc circuits.
In these uses, bulk ceramic resistors provide low inductance, high average power per unit size, stability
at high voltage, and durability at extreme peak-power levels. Film resistors typically cannot withstand
high-voltage pulse applications.
RF/Digital Loads and High-Frequency Applications
Token Non-Inductive Voltage Resistors are used extensively for high-frequency RF loads in broadcast
and communication equipment because of their non-inductive characteristics. They provide excellent
non-inductive power-handling capacity at frequencies up to the gigahertz range, with no sacrifice in
power dissipation.
Film resistors may provide the needed non-inductive characteristics required by such RF applications,
but they have size limitations and present reliability problems due to potential film burnout. This is
especially true in advanced digital applications such as digital radio and TV transmitters involving
pulses at high frequencies.
Application Notes
Due to the high voltage which can appear between the end cap and any adjacent metal part, resistors
should be mounted at an adequate distance from other conductors.
An appropriate number of resistors may be screwed together as a stick to provide an assembly which
will be capable to withstanding any desired voltage, providing no individual resistor is subject to a
greater stress or power dissipation than is recommended in its data sheet, and that appropriate
anticorona devices are fitted.
The axial termination should not be bent closer than twice the diameter of the terminal wire from the
body of the resistor.
When resistors are required to be potted, the preferred encapsulant is a silicone compound.
Oil Immersion
For some high voltage applications it is required to immerse the components in oil or gas to reduce the
effects of corona and surface tracking. A special lacquer protected version of the resistor is available,
suitable for immersion in transformer oil or SF6.
Page: 10/10
相关型号:
©2020 ICPDF网 联系我们和版权申明