TCB5FL-616DB1197 [TOKEN]
Balun Transformer General Information; 平衡 - 不平衡变压器基本信息型号: | TCB5FL-616DB1197 |
厂家: | TOKEN ELECTRONICS INDUSTRY CO., LTD. |
描述: | Balun Transformer General Information |
文件: | 总23页 (文件大小:627K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
TOKEN
SMD
BALUN
TRANSFORMERS
Token Electronics Industry Co., Ltd
.
Taiwan: No. 137, Sec. 1, Chung Shin Rd., Wu Ku Hsiang, Taipei Hsien, Taiwan, R.O.C
TEL: 886-2-2981 0109; FAX: 886-2-2988 7487
China: 12F, Zhongxing Industry Bld., Chuangye Rd., Nanshan District, Shenzhen, Guangdong
TEL: 86-755-2605 5363, 2605 5364; FAX: 86-755-2605 5365
rfq token.com.tw
http://www.token.com.tw
Product Index
Information
General Information ----------------------------------------------------------------------------- 01
RF Balun & SMD EMI Filters
TCB4F Series - SMD Common Mode Balun Transformers ------------------------- 03
TCB5F Series - Surface Mount RF Balun Transformer ------------------------------- 09
TCB5FL Series - SMD Balun Transformer ------------------------------------------------ 13
TCPWC Series - EMI Filters SMD Common Mode Choke ---------------------------- 16
Notice: Specification Changed or Version Updated will be posted at irregular intervals.
All Updated and Final Specifications, Please Confirm with TOKEN ELECTRONICS
REPRESENITIVES.
rfq token.com.tw
:
http://www.token.com.tw
:
Balun Transformer General Information
TOKEN
Surface Mount
Balun Transformer
General Infornation
What is Balun Transformer?
Balun is name of device that can be like a common mode choke, unbalance to balance transformer,
or a step up or down transformer.
Balun is an acronym of BALanced UNbalanced, it’s used to convert an unbalanced signal to a
balanced one or vice versa. A balun transformer is a device that:
● joins a balanced line (one that has two conductors, with equal currents in opposite directions,
such as a twisted pair cable).
● to an unbalanced line (one that has just one conductor and a ground, such as a coaxial cable).
Baluns isolate a transmission line and provide a balanced output. A typical use for a balun is in a
television antenna.
Balanced: A method of transmitting signals using two signal lines. One line carries the source signal;
the other carries a signal of opposite phase (antiphase).
Unbalanced: A method of transmitting signals using one signal line, with a ground line providing a
reference potential.
Why Use a Balun?
Baluns are used for two primary reasons:
● One : Eliminate “common mode current” on the transmission line.
● Two : Matching antenna impedance to the transmission line.
http://www.token.com.tw/
rfq token.com.tw
01 of 21
Version 2010
Balun Transformer General Information
TOKEN
Insertion Loss (dB)
Loss due to transmission from primary dot port to secondary dot port and secondary port. Most balun
transformers are symmetrical through their central horizontal axis, therefore, an input can be applied at
the primary dot port or the primary port with differential outputs at the secondary dot and secondary ports.
Basics of Broadband Transformers
There are two kinds of broadband transformers. One is known as a conventional type, which has separate
primary and secondary windings, as do power and audio transformers. The other type is called a
transmission-line transformer. It is believed that the latter variety is the most efficient of the two.
Transmission-line transformers are wound with twisted or parallel windings and produce specific
integers of impedance transformation, such as 4:1, 9:1, and 16:1. Conventional transformers permit
you to obtain any transformation ratio you need.
Applications of Balun Transformers
In a balun transformer, one pair of terminals is balanced, that is, the currents are equal in magnitude and
opposite in phase. The other pair of terminals is unbalanced; one side is connected to electrical ground
and the other carries the signal. Balun transformers can be used between various parts of a wireless or
cable communications system. Some common applications denotes as following:
● Television receiver (Balanced) - coaxial cable network or Coaxial antenna system (Unbalanced)
● FM broadcast receiver (Balanced) - Coaxial antenna system (Unbalanced)
● Dipole antenna (Balanced) - Coaxial transmission line (Unbalanced)
● Parallel-wire transmission line (Balanced) - Coaxial transmitter output, or Coaxial receiver input
(Unbalanced)
Token’s baluns provide impedance transformation in addition to conversion between balanced and
unbalanced signal modes. Most television and FM broadcast receivers are designed for 300-ohm
balanced systems, while coaxial cables have characteristic impedances of 50 or 75 ohms.
Impedance-transformer baluns with larger ratios are available and used to match high-impedance
balanced antennas to low-impedance unbalanced wireless receivers, transmitters, or transceivers.
02 of 21
http://www.token.com.tw/
rfq token.com.tw
Version 2010
TCB4F SMD Balun Transformers
TOKEN
SMD Common Mode
Balun Transformers
SMD Common Mode Balun Transformers For USB - TCB4F Series
Surface Mount Common Mode Balun Transformer
(TCB4F) For USB
Preview
Token Electronics has introduced SMD common mode transformers (balun transformers) in 3.8 x 4.4 mm
compact size, which are used to convert between unbalanced-balanced signals in the antenna inputs of tuner
circuits for terrestrial digital broadcast compatible compact devices. Up to now balun transformers have been
made by winding wire around a spectacle-shaped ferrite core, and are widely used in electronic devices such as
TVs and desktop PCs.
Token SMD choke coils common mode TCB4F series are primarily designed for choking power lines and
conform to the RoHS compliant and Lead-free. SMD TCB4F can be customed designs and tighter tolerances
available on request.
Windings use paired or and triple wires for high uniformity. Base pins are end proccessed to allow direct
mounting on PCB. Ideal for use in double balanced mixers, and as broad band transformers, transistors and
for impedance conversion. Application of SMD choke coils specific designs also available including different
inductance values and Q specifications adjusted to frequency requirements.
Token is equipped to design and produce custom components to meet many design and reliability demands.
Custom parts are available on request. Token will also produce devices outside these specifications to meet
specific customer requirements, please contact our sales for more information.
Features :
- Pair and triple wire coil for high stability and high balance.
- Available in tape & reel for automatic surface mounting..
Applications :
- Double Balance Mixers.
- Broad-Band Transformers.
- Impedance Transformers.
- Common Mode Filter, Balun Transformers.
http://www.token.com.tw/
rfq token.com.tw
Version 2010
03 of 21
TCB4F SMD Balun Transformers
TOKEN
Configurations & Dimensions
Land Pattern
I
E
H
J
C
D
F
Type
A
B(max) C(max)
4.4 3.2
D
E(max)
F
G
H
I
J
K
L
TCB4F
3.8
2.0
5.5
0.45
3.0
2.7
4.4 1.3 3.0 1.0
Note: Design as Customer’s Requested Specifications.
(TCB4F - 617DB) Electrical Characteristics A
Winding Turns
1-6=2-4=2-6=3-4
Part Number
μiac
TCB4F - 617DB1673
TCB4F - 617DB1674
TCB4F - 617DB1675
TCB4F - 617DB1714
2 1/2 T
3 1/2 T
4 1/2 T
5 1/2 T
300
300
300
300
(TCB4F - 617DB) Test Circuit A
Port1
Port2
Port3
04 of 21
http://www.token.com.tw/
rfq token.com.tw
Version 2010
TCB4F SMD Balun Transformers
TOKEN
(TCB4F - 617DB) Typical Characteristics A
TCB4F-617DB-1714 (Impedance Ratio=50Ω:200Ω )
TCB4F-617DB-1673 (Impedance Ratio=50Ω:200Ω )
0
1
0
Port1~Port3
1
2
3
4
5
6
Port1~Port2
Port1~Port3
2
3
Port1~Port2
4
5
6
7
7
8
8
9
9
10
10
1
10
100
1000 3000
1
10
100
1000 3000
Frequency (MHz)
Frequency (MHz)
(TCB4F - 617DB) Electrical Characteristics B
Part Number
Winding Turns
μiac
300
300
300
300
TCB4F - 617DB1653
TCB4F - 617DB1654
TCB4F - 617DB1655
TCB4F - 617DB1724
2 1/2 T
3 1/2 T
4 1/2 T
5 1/2 T
(TCB4F - 617DB) Test Circuit B
Port1
Port2
05 of 21
Version 2010
http://www.token.com.tw/
rfq token.com.tw
TCB4F SMD Balun Transformers
TOKEN
(TCB4F - 617DB) Typical Characteristics B
TCB4F-617DB-1653 (50Ω:50Ω )
TCB4F-617DB-1654 (50Ω:50Ω )
0
1
2
3
4
5
6
7
8
0
1
2
3
4
5
6
7
8
9
10
9
10
1
10
Frequency (MHz)
TCB4F-617DB-1655 (50Ω:50Ω )
100
1000 3000
1
10
100
1000 3000
Frequency (MHz)
TCB4F-617DB-1724 (50Ω:50Ω )
0
1
2
3
4
5
6
7
8
0
1
2
3
4
5
6
7
8
9
10
9
10
1
10
100
1000 3000
1
10
100
1000 3000
Frequency (MHz)
Frequency (MHz)
(TCB4F - 617DB) Electrical Characteristics C
Part Number
Winding Turns
μiac
TCB4F - 617DB1643
TCB4F - 617DB1644
TCB4F - 617DB1645
TCB4F - 617DB1646
2 1/2 T
3 1/2 T
4 1/2 T
5 1/2 T
1500
1500
1500
1500
(TCB4F - 617DB) Electrical Characteristics C
Port1
Port2
06 of 21
Version 2010
http://www.token.com.tw/
rfq token.com.tw
TCB4F SMD Balun Transformers
TOKEN
(TCB4F - 617DB) Typical Characteristics C
TCB4F - 617DB-1643 (50Ω:50Ω )
TCB4F - 617DB-1644 (50Ω:50Ω )
0
1
2
3
4
5
6
7
8
0
1
2
3
4
5
6
7
8
9
10
9
10
1
10
100
1000 3000
1
10
100
1000 3000
Frequency (MHz)
Frequency (MHz)
TCB4F - 617DB-1645 (50Ω:50Ω )
TCB4F - 617DB-1646 (50Ω:50Ω )
0
1
2
3
4
5
6
7
8
0
1
2
3
4
5
6
7
8
9
10
9
10
1
10
100
1000 3000
1
10
100
1000 3000
Frequency (MHz)
Frequency (MHz)
(TCB4F - 617PT) Electrical Characteristics
Winding Turns
1-2=2-3=4-6
Part Number
μiac
TCB4F - 617PT1667
TCB4F - 617PT1669
TCB4F - 617PT1699
TCB4F - 617PT1664
2T
3T
4T
5T
300
300
300
300
(TCB4F - 617PT) Test Circuit
Port1
Port2
Port3
07 of 21
Version 2010
http://www.token.com.tw/
rfq token.com.tw
TCB4F SMD Balun Transformers
TOKEN
(TCB4F - 617PT) Typical Characteristics
TCB4F-617PT-1667 (Impedance Ratio=50Ω:200Ω )
TCB4F-617PT-1664 (Impedance Ratio=50Ω:200Ω )
0
1
2
3
4
0
1
2
3
4
5
6
Port1~Port2
Port1~Port3
1000 3000
5
6
Port1~Port3
7
7
8
Port1~Port2
8
9
9
10
10
1
10
100
1
10
100
1000 3000
Frequency (MHz)
Frequency (MHz)
How to Order
TCB4F
617DB1673
Part Number: TCB4F
Type
Code
Type
617DB1673
617PT1667
617DB1653
617DB1643
Frequency mixer
Frequency mixer
Balun Transformers
Balun Transformers
Back to 1st Page - SMD Common Mode Balun Transformers (TCB4F)
08 of 21
http://www.token.com.tw/
rfq token.com.tw
Version 2010
TCB5F RF Balun Transformer
TOKEN
Surface Mount RF
Balun Transformers
Surface Mount RF Balun Transformer
(TCB5F) Common Mode
Preview
Token utilizes the latest winding technology using paired wires for high uniformity and enabling the most cost-
effective designs in manufacturing common mode surface mount RF balun transformer products.
Base pins are end proccessed to allow direct mounting on PCB. Ideal for use in double balanced mixers, and as
broad band transformers, transistors and for impedance conversion.
Token RF Balun Transformer TCB5F series are primarily designed for choking power lines and conform to the
RoHS compliant and Lead-free. SMD TCB5F feature with ultra-compact size, wide inductance selection, and
low-resistance coils. SMD choke coils can be customed designs and tighter tolerances available on request.
Application of Balun Transformer specific designs also available including different inductance values and Q
specifications adjusted to frequency requirements.
Token is equipped to design and produce custom components to meet many design and reliability demands.
Custom parts are available on request. Token will also produce devices outside these specifications to meet
specific customer requirements, please contact our sales for more information.
Features :
- Pair wire coil for high stability.
Applications :
- Double Balance Mixers, Broad-Band Transformers;
- Impedance Transformers, Balun Transformers.
http://www.token.com.tw/
rfq token.com.tw
Version 2010
09 of 21
TCB5F RF Balun Transformer
TOKEN
Configurations & Dimensions
Recommended Patterns
G
A
E
C
H
Type
A (max) B (max) C (max)
6.9 6.9 4.4
D
E
F
G
H
I
J
TCB5F
4.0
3.8
0.6
5.7
1.7
1.2
4.0
Note: Design as Customer’s Requested Specifications.
(TCB5F - 458DB) Electrical Characteristics
Winding Turns
1-6=2-4=2-6=3-4
Part Number
μiac
TCB5F - 458DB1614
TCB5F - 458DB1615
TCB5F - 458DB1616
2 1/2 T
3 1/2 T
4 1/2 T
300
300
300
(TCB4F - 617DB) Test Circuit A
Port1
Port2
Port3
10 of 21
http://www.token.com.tw/
rfq token.com.tw
Version 2010
TCB5F RF Balun Transformer
TOKEN
(TCB5F - 458DB) Typical Characteristics
TCB5F-458DB-1614 (Impedance Ratio=50Ω:200Ω)
TCB5F-458DB-1616 (Impedance Ratio=50Ω:200Ω)
0
0
1
2
1
2
Port1~Port2
Port1~Port3
Port1~Port3
3
3
4
4
5
5
Port1~Port2
6
6
7
7
8
8
9
9
10
10
1
10
100
1000 3000
1
10
100
1000 3000
Frequency (MHz)
Frequency (MHz)
(TCB4F - 617DB) Electrical Characteristics B
Winding Turns
1-2=2-3=4-6
Part Number
μiac
TCB5F - 458PT1619
TCB5F - 458PT1586
TCB5F - 458PT1587
TCB5F - 458PT1565
2 T
3 T
4 T
5 T
300
230
230
230
(TCB5F - 458PT) Test Circuit
Port1
Port2
Port3
11 of 21
Version 2010
http://www.token.com.tw/
rfq token.com.tw
TCB5F RF Balun Transformer
TOKEN
(TCB5F - 458PT) Typical Characteristics
TCB5F-458PT-1619 (Impedance Ratio=50Ω:200Ω)
TCB5F-458PT-1586 (Impedance Ratio=50Ω:200Ω)
0
1
2
3
4
5
0
1
2
3
4
5
Port1~Port3
6
7
6
Port1~Port2
7
Port1~Port2
8
8
Port1~Port3
9
9
10
10
1
10
100
1000 3000
1
10
100
1000 3000
Frequency (MHz)
Frequency (MHz)
TCB5F-458PT-1587 (Impedance Ratio=50Ω:200Ω)
TCB5F-458PT-1565 (Impedance Ratio=50Ω:200Ω)
0
1
0
1
2
3
4
2
Port1~Port3
3
4
5
Port1~Port3
5
6
6
7
Port1~Port2
7
8
8
Port1~Port2
9
9
10
10
1
10
100
1000 3000
1
10
100
1000 3000
Frequency (MHz)
Frequency (MHz)
How to Order
TCB5F
458DB1614
Part Number: TCB4F
Type
Code
Type
458DB1614
458DB1615
458PT1619
458PT1586
Frequency mixer
Frequency mixer
Frequency mixer
Frequency mixer
Back to 1st Page - Surface Mount RF Balun Transformer (TCB5F)
12 of 21
Version 2010
http://www.token.com.tw/
rfq token.com.tw
TCB5FL SMD Balun Transformer
TOKEN
SMD Balun
Surface Mount
Transformer
SMD Balun Transformer (TCB5FL)
Common Mode
Preview
A Balun is a device which converts balanced impedance to unbalanced and vice versa. In addition, baluns can
also provide impedance transformation, hence the name Balun Transformers.
Token utilizes the latest winding technology using paired wires for high uniformity and enabling the most cost-
effective designs in manufacturing SMD balun transformer products.
Token SMD common mode TCB5FL balun transformer series are primarily designed for choking power lines
and conform to the RoHS compliant and Lead-free. SMD TCB5FL feature with ultra-compact size, wide
inductance selection, and low-resistance coils. SMD TCB5FL can be customed designs and tighter tolerances
available on request.
Application of SMD balun transformer specific designs also available including different inductance values and
Q specifications adjusted to frequency requirements. Base pins are end proccessed to allow direct mounting on
PCB. Ideal for use in double balanced mixers, and as broad band transformers, transistors and for impedance
conversion.
Token will also produce devices outside these specifications to meet customer requirements, with comprehensive
application engineering and design support available for customers worldwide.
Features :
- Pair wire coil for high stability.
Applications :
- Double Balance Mixers, Broad-Band Transformers;
- Impedance Transformers, Balun Transformers , etc..
13 of 21
http://www.token.com.tw/
rfq token.com.tw
Version 2010
TCB5FL SMD Balun Transformer
TOKEN
Configurations & Dimensions
Recommended Patterns
A
C
F
G
Type
A (max) B (max) C (max)
6.9 6.9 3.6
D
E
F
G
H
I
TCB5FL
4.0
5-0.6
5.7
1.7
1.2
4.0
Note: Design as Customer’s Requested Specifications.
(TCB5FL) Common Mode Electrical Characteristics
Winding Turns
1-6=2-4=2-6=3-4
Part Number
μiac
TCB5FL - 616DB1196
TCB5FL - 616DB1197
TCB5FL - 616DB1198
2 1/2 T
3 1/2 T
4 1/2 T
300
300
300
(TCB4F - 617DB) Test Circuit A
Port1
Port2
Port3
14 of 21
http://www.token.com.tw/
rfq token.com.tw
Version 2010
TCB5FL SMD Balun Transformer
TOKEN
(TCB5F - 458DB) Typical Characteristics
TCB5F-616DB-1196 (Impedance Ratio=50Ω:200Ω)
TCB5F-616DB-1197 (Impedance Ratio=50Ω:200Ω)
0
-1
-2
0
-1
Port1~Port3
-2
-3
-4
-5
Port1~Port2
-3
Port1~Port2
-4
-5
-6
-6
-7
Port1~Port3
-7
-8
-8
-9
-9
-10
-10
1
10
100
1000 3000
1
10
100
1000 3000
Frequency (MHz)
Frequency (MHz)
TCB5F-616DB-1198 (Impedance Ratio=50Ω:200Ω)
0
-1
-2
-3
-4
-5
Port1~Port2
Port1~Port3
-6
-7
-8
-9
-10
1
10
100
1000 3000
Frequency (MHz)
How to Order
TCB5F
616DB1196
Part Number: TCB5FL
Type
Code
Type
616DB1196
616DB1197
Frequency mixer
Frequency mixer
Back to 1st Page - SMD Balun Transformer (TCB5FL) Common Mode
15 of 21
Version 2010
http://www.token.com.tw/
rfq token.com.tw
TCPWC EMI Filters SMD Choke
TOKEN
SMD EMI Filters
Common Mode Choke
Preview
Token EMI filters SMD common mode choke TCPWC series are primarily designed for choking power lines and
conform to the RoHS compliant and Lead-free. SMD choke EMI filters feature with ultra-compact size, wide
inductance selection, and low-resistance coils. SMD TCPWC can be customed designs and tighter tolerances
available on request.
Token’s TCPWC taking advantage of the latest winding technology consists ferrite core and a pair lines enabling
the most effective in noise suppression designs. Feature high common-mode impedance at noise band and low
differential-mode impedance at signal band. Low differential-mode impedance with high coupling factor, there is
almost no distortion on high speed signal.
Application of SMD choke EMI filters specific designs also available including different inductance values and
Q specifications adjusted to frequency requirements.
Token will also produce devices outside these specifications to meet customer requirements, with comprehensive
application engineering and design support available for customers worldwide.
Applications :
- USB Line for Personal Computers and Peripheral.
- IEEE 1394 Line for Personal Computers ,DVC ,STB.
- LCD Panels. Low-Voltage Differential Signal (LVDS).
- EMI Radiation Noise Suppression for Any Electronic Device.
http://www.token.com.tw/
rfq token.com.tw
16 of 21
Version 2010
TCPWC EMI Filters SMD Choke
TOKEN
Configurations & Dimensions
K H
K
TCPWCH
Enamel-insulated wire
B
C
I
E
J
A
F
E
I
G
TYPE
A
B
C
E
F
G
H
I
0.4
0.6
J
K
TCPWCH05
TCPWCH06
2.0±0.2
3.2±0.2
1.2±0.2
1.6±0.2
1.2±0.2
1.8±0.2
0.45
0.60
1.2
2.0
0.4
0.6
0.8
1.6
0.4
0.4
0.90
1.05
Electrical Characteristics
Insulation
Resistance
(MΩ)(min)
Impedance
(Ω) 100MHz (Ω)(max)
DCR
Rated Current Rated Voltage
Withstanding
Voltage (V)(DC)
Part Number
(mA)(max)
(V)(DC)
TCPWCH05MT670
TCPWCH05MT900
TCPWCH05MT121
TCPWCH05MT181
TCPWCH05MT201
TCPWCH05MT261
TCPWCH05MT371
67
0.25
0.35
0.30
0.35
0.35
0.40
0.40
400
330
370
330
330
300
280
50
50
50
50
50
50
50
125
125
125
125
125
125
125
10
10
10
10
10
10
10
90
120
180
200
260
370
TCPWCH06MT900
TCPWCH06MT161
TCPWCH06MT261
TCPWCH06MT601
TCPWCH06MT102
TCPWCH06MT222
90
0.30
0.40
0.50
0.80
1.00
1.20
370
340
310
260
230
200
50
50
50
50
50
50
125
125
125
125
125
125
10
10
10
10
10
10
160
260
600
1000
2200
Note: Operating Temp.: -40°C+85°C.
17 of 21
Version 2010
rfq token.com.tw
http://www.token.com.tw/
TCPWC EMI Filters SMD Choke
TOKEN
Packaging Quantity & Reel Specifications
1.2±0.2
Label
D:21.8±0.8
+0
-3
+1
-0
180
60
D:13.0±0.3
2.0±0.5
9.5±0.50
11.4±1.0
Reel Specifications
Type
Emboss Plastic Tape (PCS)
TCPWCH05
TCPWCH06
2000
2000
Emboss Plastic Tape Specifications
Top Tape
Φ D0
E
A
F
W
B
Φ D1 1.5min
direction of unreeling
T
P1 P2
P0
Resistor
Emboss Tape
A
±0.10
B
±0.05
W
±0.20
E
F
P0
±0.10
P1
±0.10
P2
±0.10
ΦD0
+0.10
Codes
t ±0.10
±0.10 ±0.10
TCPWCH05
TCPWCH06
1.40
1.90
2.55
3.50
8.0
8.0
1.75
1.75
3.5
3.5
4.00
4.00
4.00
2.00
2.00
1.50
1.50
1.35
2.10
4.00
Version 2010
18 of 21
http://www.token.com.tw/
rfq token.com.tw
TCPWC EMI Filters SMD Choke
TOKEN
Leader / Tape
Trailer End
Leader
Empty Compartments with
Cover Tape (80mm min)
Cover Tape Only
450mm min
Trailer(80mm min)
Peel-off Force
160~180°
Top cover tape
Base tape
The force for tearing off cover tape is 0.05 ~ 0.69(N)
in the arrow direction at the following conditions:
Temperature: 5 ~ 35°C.
Humidity: 45 ~ 85%.
Atmospheric pressure: 860 ~ 1060 hpa.
(TCB4F - 617DB) Electrical Characteristics C
Port1
Port2
Version 2010
http://www.token.com.tw/
rfq token.com.tw
19 of 21
TCPWC EMI Filters SMD Choke
TOKEN
Environmental Characteristics
Test Items
Specifications
Test Conditions / Test Methods
Electrical Performance Test
Impedance
LCR Meter HP 4291B
Refer to standard
electrical characteristic spec.
DC Resistance (RDC)
Micro-Ohm meter (GOM-801G)
Withstand Voltage
(VDC)
Test Voltage: 2.5 Times Rated Voltage; Testing Time: 60 sec.
Charge Current: 0.5mA
Rated Voltage
(VDC)
Test Voltage: Rated Voltage; Testing Time: 1 to 5 sec;
Charge Current: 1mA
Component should not be
damaged
Insulation
Charge Current: 1 minute
Resistance (I.R.)
10M ohm min
Mechanical Performance Test
Base: 0805 ≥ 2 Lbs
The component should be soldered (232°C±5°C for 10 sec.)
totinned copper substrate. Applied force gauge to the side of
component It must withstand force of 2 or 4 pounds without
failure of the component.
Component
Adhesion
(push Test)
Cover: 0805 ≥ 1 Lbs
Base: 1206 ≥ 4 Lbs
Cover: 1206 ≥ 2 Lbs
Component should not be
damaged
Dropping chip by each side and corner; Drop 10 times in total
Drop height:100cm; Drop weight:125g
Drop Test
The terminal should at least be
90% covered with solder
The component shall be dipped in a melted solder bath
at 235°C±5°C for 5 seconds.
Solderability Test
Vibration Test
Component should not be
1. Amplitude: 1.5 m/m; 2. Frequency: 10-55-10 Hz(1min);
(Low Frequency)
damaged
3. Direction: X, Y, Z; 4. Duration: 2 Hrs/X, Y, Z.
Climatic Test
Low Temperature
Storage Test
1. Temp: -40°C±C2°C; 2. Time: 1000±48 Hours; 3. Component
should be tested after 1 hour at room temperature.
ROOM TEMP
15MINS
-25±2°C
30MINS
ROOM TEMP
15MINS
-85±2°C
30MINS
Impedance change:
Within±20%
Thermal Shock Test
Total: 5 Cycles
Without distinct damage in
ppearance.
High Temperature
Storage Test
1. Temp: 85°C±2°C; 2. Time: 1000±48 Hours;
3. Component should be tested after 1 hour at room temperature.
Humidity Test
1. Temp: 40°C±2°C; 2. R.H.: 90%~95%; 3. Time: 48±2 Hours
High Temperature
Load Life Test
1. Temp: 85°C±2°C; 2. Time: 96±12 Hours;
3. Load: Allowed DC Current
There should be no evidence of
short or open circuit
Low Temperature
Load Life Test
1. Temp: -40°C±2°C; 2. Time: 96±12 Hours;
3. Load: Allowed DC Current
Note: Storage Temperature: 25±3°C; Humidity:<80%RH
20 of 21
Version 2010
http://www.token.com.tw/
rfq token.com.tw
TCPWC EMI Filters SMD Choke
TOKEN
How to Order
TCPWC
H
05
M
TR
900
Packaging
Part Number: TCPWCH05, TCPWCH06
Shielding Type
Code
TR
p
Packaging
Taping Reel
Bulk
Code
H
Shielding Type
Shielding
Impedance
Dimensions (L×W) (mm)
Code
900
121
102
222
Impedance
90Ω
Code
05
Dimensions(L×W)
2.10×1.20
EIA
EIA0805
1206
120Ω
06
3.20×1.50
1000Ω
2200Ω
Impedance Tolerance: M (±20%)
Back to 1st Page - EMI Filters SMD Common Mode Choke (TCPWC)
http://www.token.com.tw/
rfq token.com.tw
21 of 21
Version 2010
相关型号:
©2020 ICPDF网 联系我们和版权申明