XC6221B401MR-G [TOREX]
Low ESR Caps Compatible High Speed LDO Voltage Regulators with ON/OFF Switch; 低ESR帽兼容的高速LDO电压稳压器，带有ON / OFF开关
| 型号： | XC6221B401MR-G |
| 厂家： | 
Torex Semiconductor |
| 描述： | Low ESR Caps Compatible High Speed LDO Voltage Regulators with ON/OFF Switch |
| 文件： | 总23页 (文件大小：461K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
ETR0328_009
■GENERAL DESCRIPTION
The XC6221 series is a high accuracy, low noise, high speed, low dropout CMOS regulator with high ripple rejection. The series
includes a reference voltage source, an error amplifier, a current limiter, and a phase compensation circuit.
The CE function enables the entire circuit to be in stand-by state by inputting low level signal. In this stand-by mode, the
electric charge at the output capacitor (CL) will be discharged by the internal auto-discharge switch, and as a result the VOUT
pin quickly returns to the VSS level. The output stabilization capacitor (CL) is also compatible with low ESR ceramic capacitors.
Output voltage is selectable in 0.05V increments within a range of 0.8V~5.0V, using the laser trimming technology set in factory.
The current limiter's fold-back circuit also operates as a short circuit protection and an output current limiter at the output pin.
The series achieves a fast response with only 25μA of low power consumption. Also the series has low dropout voltage
characteristics, which is 80mV at IOUT=100mA and VOUT=3.0V.
With the use of small USP-4 and ultra small USPN-4 packages, a small footprint circuit can be designed.
■APPLICATIONS
■FEATURES
Output Current
Dropout Voltage
Operating Voltage Range
Output Voltages
Accuracy
: 200mA <Up to 250mA (TYP.)>
:80mV@ IOUT=100mA,VOUT=3.0V
: 1.6V ~ 6.0V
: 0.8V~5.0V (0.05V increments)
: +2% (VOUT >1.5V)
(+1% option is available)
+30mV (VOUT≦1.45V)
(+20mV option is available)
: 25μA (TYP.)
●Cellular phones
●Cordless phones
●Wireless communication equipment
●Portable games
Low Power Consumption
Stand-by Current
●Cameras, VCRs
: Less than 0.1μA
High Ripple Rejection
Operating Temperature
Low ESR Capacitor
CL High-Speed Auto-Discharge (XC6221B)
CE Pin internally pulled-down
Low Output Noise
: 70dB @ 1kHz
: -40℃~85℃
: 1.0μF ceramic capacitor
●Portable AV equipment
●PDAs
Ultra Small Packages
: USP-4, SOT-25, SSOT-24
USPN-4
■TYPICAL APPLICATION CIRCUIT ■TYPICAL PERFORMANCE
CHARACTERISTICS
●Load Transient Response
XC6221x182
VIN=CE=2.8V, Tr=Tf=5us
Topr=25 , C =CL=1uF (ceramic)
IN
℃
1.9
300
250
200
150
100
50
Output Voltage
1.8
1.7
1.6
Output Current
1.5
1.4
1.3
0
Time (500us/div)
1/23
XC6221 Series
■PIN CONFIGURATION
VOUT
5
NC
4
VIN
4
VOUT
3
VSS
2
1
3 CE
VOUT
4
VIN
1
2
1
2
3
CE
VSS
VIN
VSS
CE
SSOT-24
SOT-25
USP-4
(BOTTOM VIEW)
(TOP VIEW)
(TOP VIEW)
3 CE
VSS
2
1
VOUT
4
VIN
USPN-4
(BOTTOM VIEW)
*The heat dissipation pad of the USP-4 package is
recommended to solder as the recommended
mount pattern and metal mask pattern for mounting
strength. The mount pattern should be electrically
opened or connected to the VSS (No.2) pin.
■PIN ASSIGNMENT
PIN NUMBER
PIN NAME
FUNCTIONS
USP-4
SOT-25
SSOT-24 USPN-4
4
1
2
3
-
1
5
2
3
4
4
3
2
1
-
4
1
2
3
-
VIN
VOUT
VSS
CE
Power Input
Output
Ground
ON/OFF Control
No Connection
NC
2/23
XC6221
Series
■PRODUCT CLASSIFICATION
●Ordering Information
(*1)
XC6221 ①②③④⑤⑥-⑦
DESIGNATOR
DESCRIPTION
SYMBOL
A
DESCRIPTION
No CE pull-down resistor without CL auto discharge
B
C
No CE pull-down resistor with CL auto discharge
CE pull-down resistor without CL auto discharge
CE pull-down resistor with CL auto discharge
Type of Regulator
(All CE high active)
①
D
② ③
Output Voltage
08 ~ 40
ex.) VOUT(T) = 3.0V → ② = 3, ③ = 0
+30mV @ 0.8V≦VOUT(T)≦1.40V
When 0.1V steps such as VOUT(T)=0.8V → ②=0, ③=8, ④=2
2
+2% @ VOUT(T)>1.5V
When 0.1V steps such as VOUT(T)=1.5V → ②=1, ③=5, ④=2
+30mV @ 0.85V≦VOUT(T)≦1.45V
When 0.05V steps such as VOUT(T)=0.85V → ②=0, ③=8, ④=A
+2% @ VOUT(T)>1.55V
When 0.05V steps such as VOUT(T)=1.55V → ②=1, ③=5, ④=A
+20mV @ 0.8V≦VOUT(T)≦1.90V
When 0.1V steps such as VOUT(T)=0.8V → ②=0, ③=8, ④=1
+1% @ VOUT(T)>2.0V
A
1
④
Output Accuracy
When 0.1V steps such as VOUT(T)=2.0V → ②=2, ③=0, ④=1
+20mV @ 0.85V≦VOUT(T)≦1.95V
When 0.05V steps such as VOUT(T)=0.85V → ②=0, ③=8, ④=B
+1% @ VOUT(T)>2.0V
B
When 0.05V steps such as VOUT(T)=2.05V → ②=2, ③=0, ④=B
GR
USP-4
GR-G
MR
USP-4 (Halogen & Antimony free)
SOT-25
Packages
⑤⑥-⑦
MR-G
NR
SOT-25 (Halogen & Antimony free)
SSOT-24
Taping Type (*2)
NR-G
7R-G
SSOT-24 (Halogen & Antimony free)
USPN-4 (Halogen & Antimony free)
* For the USPN-4 package, 0.8V≦VOUT(T)≦1.15V is under development.
(*1) The “-G” suffix indicates that the products are Halogen and Antimony free as well as being fully RoHS compliant.
(*2) The device orientation is fixed in its embossed tape pocket.
For reverse orientation, please contact your local Torex sales office or representative.
(Standard orientation: ⑤R-⑦, Reverse orientation: ⑤L-⑦)
3/23
XC6221 Series
■BLOCK DIAGRAMS
ON/OFF
ON/OFF
Control
CE
V
CE
V
IN
IN
Control
-
+
-
+
Error
Amp
Error
Amp
Current
Limit
Current
Limit
CE CE/
CE CE/
each
each
circuit
circuit
V
VOUT
OUT
R1
R1
Rdischg
CE/
R2
R2
Voltage
Voltage
V
V SS
SS
Reference
Reference
●XC6221A Series
●XC6221B Series
ON/OFF
Control
ON/OFF
Control
CE
V
CE
VIN
IN
R Pull
-down
R Pull
-down
-
-
Error
Amp
Error
Amp
Current
Limit
Current
Limit
CE CE/
CE CE/
+
+
each
circuit
each
circuit
V
V
OUT
OUT
R1
R1
Rdischg
CE/
R2
R2
Voltage
Voltage
VSS
VSS
Reference
Reference
●XC6221C Series
●XC6221D Series
*Diodes inside the circuit are an ESD protection diode and a parasitic diode.
■ABSOLUTE MAXIMUM RATINGS
Ta=25℃
PARAMETER
Input Voltage
SYMBOL
VIN
RATINGS
VSS -0.3 ~ +6.5
400(*1)
UNITS
V
mA
V
Output Current
Output Voltage
CE Input Voltage
IOUT
VOUT
VCE
VSS – 0.3 ~ VIN + 0.3
VSS – 0.3 ~ +6.5
120
V
USP-4
SOT-25
SSOT-24
USPN-4
250
Power Dissipation
Pd
mW
150
100
Operating Temperature Range
Storage Temperature Range
Topr
Tstg
- 40 ~ + 85
- 55 ~ +125
℃
℃
*1 IOUT=Less than Pd / (VIN-VOUT)
4/23
XC6221
Series
■ELECTRICAL CHARACTERISTICS
●XC6221A/BC/D series
Ta=25℃
PARAMETER
SYMBOL
CONDITIONS
MIN.
TYP.
MAX. UNITS CIRCUIT
x 0.98
x 1.02
1.5V<VOUT(T), VCE=VIN, IOUT=10mA
(*3)
(*3)
Output Voltage
(Standard)
VOUT(E)
(* 2)
VOUT(T)
(*4)
V
V
①
①
-0.03
+0.03
VOUT<1.45V, VCE=VIN, IOUT=10mA
2.0V<VOUT(T), VCE=VIN, IOUT=10mA
VOUT(T)<1.95V, VCE=VIN, IOUT=10mA
(*3)
(*3)
x 0.99
x 1.01
(*3)
(*3)
Output Voltage
(High Accuracy)
VOUT(E)
(* 2)
VOUT(T)
(*4)
-0.02
+0.02
(*3)
(*3)
VCE=VIN, VIN=VOUT(T)+1.0V,
0.8V<VOUT(T)<5.0V
VCE=VIN,
Output Current
IOUTMAX
200
-
250
10
-
mA
mV
①
①
Load Regulation
ꢀVOUT
40
0.1mA≦IOUT≦100mA
Dropout Voltage (*5)
Supply Current
Vdif
ISS
VCE=VIN, IOUT=100mA
VIN=VOUT+1.0V, IOUT=0mA
VIN=6.0V, VCE=VSS
E-2
25
mV
μA
μA
①
②
②
-
-
50
Standby Current
ISTBY
0.01
0.10
VOUT(T)+0.5V≦VIN≦6.0V
ꢀVOUT /
(ꢀVIN･VOUT)
1.1≦VOUT(T), VCE=VIN, IOUT=10mA
Line Regulation
-
0.01
0.20
%/V
①
1.6V≦VIN≦6.0V
VOUT(T)≦1.05V, VCE=VIN, IOUT=10mA
Input Voltage
Output Voltage
Temperature Characteristics
VIN
ꢀVOUT /
Ta
1.6
-
-
6.0
-
V
①
①
VCE=VIN,
IOUT=30mA, -40℃<Ta<85℃
±100
ppm/℃
(
ꢀ
･
V
OUT
)
VIN=5.75VDC+0.5Vp-pAC
4.75V≦VOUT(T)
V
CE=VIN, IOUT=30mA, f=1kHz
60
70
VIN=｛VOUT(T)+1.0｝VDC+0.5Vp-pAC
4.05V≦VOUT(T)≦4.7V
VCE=VIN, IOUT=30mA, f=1kHz
Ripple Rejection Rate
PSRR
-
-
dB
③
VIN=｛VOUT(T)+1.0｝VDC+0.5Vp-pAC
0.85V≦VOUT(T)≦4.0V
VCE=VIN, IOUT=30mA, f=1kHz
VIN=1.85VDC+0.5Vp-pAC
VOUT(T)=0.8V
VCE=VIN, IOUT=30mA, f=1kHz
Limit Current
Short Current
IL I M
VCE=VIN
200
-
250
30
-
-
mA
mA
①
①
VCE=VIN, VOUT is short-circuited at the
VSS level
ISHORT
CE High Level Voltage
CE Low Level Voltage
VCEH
VCEL
1.2
-
-
-
-
-
-
6.0
0.3
V
V
④
④
VCE=VIN (XC6221A/B)
VCE=6.0V (XC6221C/D)
VCE=VSS
-0.1
1.03
-0.1
0.1
CE High Level Current
ICEH
μA
④
2.37
0.1
CE Low Level Current
CL Auto-Discharge
Resistance (* 8)
ICEL
μA
④
①
RDCHG
VIN=6.0V, VOUT(T)=4.0V, VCE=VSS
-
780
-
Ω
NOTE:
* 1: Unless otherwise stated regarding input voltage conditions, VIN=VOUT(T)＋1.0V.
* 2: VOUT (E) = Effective output voltage (Refer to the voltage chart E-0 and E-1)
(I.e. the output voltage when HS mode and an amply stabilized "VOUT (T) ＋1.0V" is provided at the VIN pin while maintaining a
certain IOUT value.)
* 3: The relation between VOU T (E) and VOUT (T) is shown in the voltage chart E-0 and E-1.
* 4: VOUT (T) = Nominal output voltage
* 5: Vdif = {VIN1(*7)-VOUT1(*6)
}
* 6: VOUT1 is the voltage equal to 98% of the normal output voltage when amply stabilized VOUT (T) +1.0V are input at the VIN pin.
* 7: VIN1 is the input voltage when VOUT1 appears at the VOUT pin while input voltage is gradually decreased.
* 8: For the XC6221B series only. The XC6221A series discharges by resistors R1 and R2 only as shown in the block diagrams.
* 9: For operating supply current of the XC6221C/D, a current through the pull-down resistor should be considered in addition to the
supply current value mentioned above.
5/23
XC6221 Series
■OUTPUT VOLTAGE CHART
SYMBOL
E-0
E-1
E-2
NOMINAL
OUTPUT
VOLTAGE
DROPOUT VOLTAGE
OUTPUT VOLTAGE
Standard +2% (V)
OUTPUT VOLTAGE
High Accuracy +1% (V)
Vdif
(mV)
(V)
VOUT(E)
VOUT(E)
Vdif
VOUT(T)
MIN.
MAX.
0.8300
0.8800
0.9300
0.9800
1.0300
1.0800
1.1300
1.1800
1.2300
1.2800
1.3300
1.3800
1.4300
1.4800
1.5300
1.5800
1.6300
1.6800
1.7300
1.7800
1.8300
1.8800
1.9300
1.9800
2.0400
2.0910
2.1420
2.1930
2.2440
2.2950
2.3460
2.3970
2.4480
2.4990
2.5500
2.6010
2.6520
2.7030
2.7540
2.8050
2.8560
2.9070
2.9580
3.0090
MIN.
MAX.
0.8200
0.8700
0.9200
0.9700
1.0200
1.0700
1.1200
1.1700
1.2200
1.2700
1.3200
1.3700
1.4200
1.4700
1.5200
1.5700
1.6200
1.6700
1.7200
1.770
TYP.
500
MAX.
850
0.80
0.85
0.90
0.95
1.00
1.05
1.10
1.15
1.20
1.25
1.30
1.35
1.40
1.45
1.50
1.55
1.60
1.65
1.70
1.75
1.80
1.85
1.90
1.95
2.00
2.05
2.10
2.15
2.20
2.25
2.30
2.35
2.40
2.45
2.50
2.55
2.60
2.65
2.70
2.75
2.80
2.85
2.90
2.95
0.7700
0.8200
0.8700
0.9200
0.9700
1.0200
1.0700
1.1200
1.1700
1.2200
1.2700
1.3200
1.3700
1.4200
1.4700
1.5200
1.5700
1.6200
1.6700
1.7200
1.7700
1.8200
1.8700
1.9200
1.9600
2.0090
2.0850
2.1070
2.1560
2.2050
2.2540
2.3030
2.3520
2.4010
2.4500
2.4990
2.5480
2.5970
2.6460
2.6950
2.7440
2.7930
2.8420
2.8910
0.7800
0.8300
0.8800
0.9300
0.9800
1.0300
1.0800
1.1300
1.1800
1.2300
1.2800
1.3300
1.3800
1.4300
1.4800
1.5300
1.5800
1.6300
1.6800
1.7300
1.7800
1.8300
1.8800
1.9300
1.9800
2.0295
2.0790
2.1285
2.1780
2.2275
2.2770
2.3265
2.3760
2.4255
2.4750
2.5245
2.5740
2.6235
2.6730
2.7225
2.7720
2.8215
2.8710
2.9205
410
330
750
650
230
410
200
160
360
290
160
125
250
210
1.8200
1.8700
1.9200
1.9700
2.0200
2.0705
2.1210
2.1715
2.2220
2.2725
2.3230
2.3735
2.4240
2.4745
2.5250
2.5755
2.6260
2.6765
2.7270
2.7775
2.8280
2.8785
2.9290
2.9795
115
195
95
170
6/23
XC6221
Series
■OUTPUT VOLTAGE CHART (Continued)
SYMBOL
E-0
E-1
E-2
NOMINAL
OUTPUT
VOLTAGE
DROPOUT VOLTAGE
OUTPUT VOLTAGE
Standard +2% (V)
OUTPUT VOLTAGE
High Accuracy +1% (V)
Vdif
(mV)
(V)
Vdif
VOUT(E)
VOUT(E)
VOUT(T)
MIN.
MAX.
3.0600
3.1100
3.1620
3.2130
3.2640
MIN.
2.9700
3.0195
3.0690
3.1185
3.1680
MAX.
3.0300
3.0805
3.1310
3.1815
3.2320
TYP.
MAX.
3.00
3.05
3.10
3.15
3.20
2.9400
2.8990
3.0380
3.0870
3.1360
3.25
3.1850
3.3150
3.2175
3.2825
3.30
3.35
3.40
3.45
3.50
3.55
3.60
3.65
3.70
3.75
3.80
3.85
3.90
3.95
4.00
4.05
4.10
4.15
4.20
4.25
4.30
4.35
4.40
4.45
4.50
4.55
4.60
4.65
4.70
4.75
4.80
4.85
4.90
4.95
5.00
3.2340
3.2830
3.3320
3.3810
3.4300
3.4790
3.5280
3.5770
3.6260
3.6750
3.7240
3.7730
3.8220
3.8710
3.9200
3.9690
4.0180
4.0670
4.1160
4.1650
4.2140
4.2630
4.3120
4.3610
4.4100
4.4590
4.5080
4.5570
4.6060
4.6550
4.7040
4.7530
4.8020
4.8510
4.9000
3.3660
3.4170
3.4680
3.5190
3.5700
3.6210
3.6720
3.7230
3.7740
3.8250
3.8760
3.9270
3.9780
4.0290
4.0800
4.1310
4.1820
4.2330
4.2840
4.3350
4.3860
4.4370
4.4880
4.5390
4.5900
4.6410
4.6920
4.7430
4.7940
4.8450
4.8960
4.9470
4.9980
5.0490
5.1000
3.2670
3.3165
3.3660
3.4155
3.4650
3.5145
3.5640
3.6135
3.6630
3.7125
3.7620
3.8115
3.8610
3.9105
3.9600
4.0095
4.0590
4.1085
4.1580
4.2075
4.2570
4.3065
4.3560
4.4055
4.4550
4.5045
4.5540
4.6035
4.6530
4.7025
4.7520
4.8015
4.8510
4.9005
4.9500
3.3330
3.3835
3.4340
3.4845
3.5350
3.5855
3.6360
3.6855
3.7370
3.7875
3.8380
3.8885
3.9390
3.9895
4.0400
4.0905
4.1410
4.1915
4.2420
4.2925
4.3430
4.3935
4.4440
4.4945
4.5450
4.5955
4.6460
4.6965
4.7470
4.7975
4.8480
4.8985
4.9490
4.9995
5.0500
80
140
* For the USPN-4 package, 0.8V≦VOUT(T)≦1.15V is under development.
7/23
XC6221 Series
■OPERATIONAL EXPLANATION
<Output Voltage Control>
The voltage divided by resistors R1 & R2 is compared with the internal reference voltage by the error amplifier. The
P-channel MOSFET connected to the VOUT pin, is then driven by the subsequent output signal. The output voltage at the
VOUT pin is controlled & stabilized by a system of negative feedback. The current limit circuit and short protect circuit
operate in relation to the level of output current. Further, the IC's internal circuitry can be shutdown via the CE pin's signal.
ON/OFF
Control
IN
V
CE
-
+
Error
Amp
Current
Limit
CE
CE/
each
OUT
V
circuit
R1
Rdischg
CE/
R2
Voltage
SS
V
Reference
<Input and Output Capacitors>
The XC6221 needs an output capacitor CL for phase compensation. Values required for the phase compensation are
shown in the chart below. If a loss of the capacitance happens, the stable phase compensation may not be obtained.
Please ensure to use a capacitor which does not depend on bias or temperature too much. For a stable power input,
please connect an input capacitor CIN of 1.0μF between the VIN pin and the VSS pin.
●Except USPN-4
OUTPUT VOLTAGE (V)
OUTPUT CAPACITOR VALUE
CL ≧4.7μF
0.8V～1.15V
1.2V～1.35V
1.4V～4.0V
4.05V～5.0V
CL ≧2.2μF
CL ≧1.0μF
CL ≧2.2μF
●USPN-4
OUTPUT VOLTAGE (V)
OUTPUT CAPACITOR VALUE
1.2V～4.0V
4.05V～5.0V
CL ≧2.2μF
CL ≧4.7μF
<CL Auto-Discharge Function>
XC6221B/D series can discharge the electric charge in the output capacitor (CL), when a low signal to the CE pin, which
enables the whole IC circuit to be turned off, is inputted via the N-channel transistor located between the VOUT pin and
the VSS pin (cf. BLOCK DIAGRAM). The CL auto-discharge resistance value is set at 780Ω(VOUT=4.0V @ VIN=6.0V at
typical). The discharge time of the output capacitor (CL) is set by the CL auto-discharge resistance (R) and the output
capacitor (CL). By setting the time constant of the CL auto-discharge resistance value [RDCHG] and the output capacitor
value (CL) as τ(τ=C x RDCHG), the output voltage after discharge via the N-channel transistor is calculated by the
following formula.
V = VOUT(E) x e –t/
,
or t=τIn ( V / VOUT(E) )
τ
where
V : Output voltage after discharge
VOUT (E) : Output voltage
t : Discharge time
τ: CL auto-discharge resistance RDCHG×Output capacitor (CL) value C)
8/23
XC6221
Series
■OPERATIONAL EXPLANATION (Continued)
<Current Limiter, Short-Circuit Protection>
The XC6221 series’ fold-back circuit operates as an output current limiter and a short protection circuit for the output pin.
When the load current reaches the current limit level, the fixed current limiter circuit operates and output voltage drops.
When the output pin is short-circuited to the VSS pin, the current falls and reaches about 30mA.
<CE Pin>
The XC6221 internal circuitry can be shutdown via the CE pin signal. In shutdown mode, output at the VOUT pin will be
pulled down to the VSS level via R1 & R2. However, with the XC6221B/D series, the CL auto-discharge resistor is
connected in parallel to R1 and R2 while the power supply is applied to the VIN pin. Therefore, time until the VOUT pin
reaches the VSS level is shorter. For the XC6221A/B, the output voltage becomes unstable, when the CE pin is left
open. For the XC6221C/D, the output voltage becomes VSS level because the CE pin is short-circuited to VSS via an
internal pull-down resistor. However, the CE input current will be increased via a pull-down resistor when the IC
operates. If this IC is used with the correct output voltage for the CE pin, the logic is fixed and the IC will operate
normally. However, the supply current may increase as a result of shoot-through current in the IC's internal circuitry
when a medium voltage is input.
■NOTES ON USE
1. Please use this IC within the stated absolute maximum ratings. The IC is liable to malfunction should the ratings be
exceeded.
2. Where wiring impedance is high, operations may become unstable due to noise and/or phase lag depending on output
current. Please wire the input capacitor (CIN) and the output capacitor (CL) as close to the IC as possible.
9/23
XC6221 Series
■TEST CIRCUITS
Circuit 1: Output Voltage, Output Current, Dropout Voltage, Input/Operating Voltage, Line Regulation, Load Regulation,
Current Limit, Short Current, CL Discharge Resistance
Circuit 2: Supply Current, Stand-by Current
●XC6221A/B series
●XC6221C/D series
10/23
XC6221
Series
■TEST CIRCUITS (Continued)
Circuit 3: Ripple Rejection Rate
Circuit 4: CE “H” “L” Level Voltage, CE “H” “L” Level Current
11/23
XC6221 Series
■TYPICAL PERFORMANCE CHARACTERISTICS
(1) Output Voltage vs. Output Current
XC6221x182
XC6221x182
VIN=CE=2.8V
CE=VIN, Topr=25
C =CL=1.0uF (ceramic)
℃
C =CL=1.0uF (ceramic)
IN
IN
2.4
1.8
1.2
0.6
0
2.4
1.8
1.2
0.6
0
V =1.9V
IN
Topr=25
℃
V =2.8V
Topr=-40
℃
IN
V =6.0V
Topr=85
IN
℃
0
100
200
300
400
0
100
200
300
400
Output Current: IOUT (mA)
Output Current: IOUT (mA)
XC6221x302
XC6221x302
V
IN=CE=4.0V
CE=VIN, Topr=25
℃
C =CL=1.0uF (ceramic)
IN
C =CL=1.0uF (ceramic)
IN
3.5
3
3.5
3
2.5
2
2.5
2
1.5
1
1.5
1
V =3.1V
IN
Topr=25
℃
V =4.0V
IN
Topr=-40
℃
0.5
0
V =6.0V
0.5
0
IN
Topr=85
℃
0
100
200
300
400
0
100
200
300
400
Output Current: IOUT (mA)
Output Current: IOUT (mA)
(2) Output Voltage vs. Input Voltage
XC6221x182
XC6221x182
CE=VIN, Topr=25
℃
CE=VIN, Topr=25
℃
C =CL=1.0uF (ceramic)
IN
C =CL=1.0uF (ceramic)
IN
2
1.9
1.8
1.7
1.6
1.5
1.4
1.9
1.85
1.8
1.75
1.7
IOUT=1mA
I
=1mA
OUT
I
=10mA
OUT
IOUT=10mA
I
OUT=30mA
IOUT=30mA
1.65
1.6
IOUT=100mA
OUT
I =100mA
1
1.5
2
2.5
3
4
4.5
5
5.5
6
Input Voltage: VIN (V)
Input Voltage: VIN (V)
12/23
XC6221
Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(2) Output Voltage vs. Input Voltage (Continued)
XC6221x302
XC6221x302
CE=VIN, Topr=25
CE=VIN, Topr=25
℃
℃
C =CL=1.0uF (ceramic)
IN
C =CL=1.0uF (ceramic)
IN
3.1
3.05
3
3.2
3.1
3
2.9
2.8
2.7
2.6
2.5
2.95
2.9
IOUT=1mA
IOUT=10mA
IOUT=1mA
IOUT=10mA
IOUT=30mA
IOUT=30mA
2.85
2.8
I
=100mA
IOUT=100mA
OUT
2
2.5
3
3.5
4
4
4.5
5
5.5
6
Input Voltage: VIN (V)
Input Voltage: VIN (V)
(3) Dropout Voltage vs. Output Current
XC6221x182
XC6221x302
CE=VIN, Topr=25
℃
CE=VIN, Topr=25
℃
C =C =1.0uF (ceramic)
IN
L
C
L
IN=C =1.0uF (ceramic)
0.4
0.4
0.35
0.3
0.35
0.3
Topr=85
Topr=25
℃
Topr=85
℃
Topr=25
℃
℃
0.25
0.2
0.25
0.2
Topr=-40
Topr=-40
℃
℃
0.15
0.1
0.15
0.1
0.05
0
0.05
0
0
50
100
150
200
0
50
100
150
200
Output Current: IOUT (mA)
Output Current: IOUT (mA)
(4) Output Voltage vs. Ambient Temperature
XC6221x182
XC6221x302
VIN=CE=4.0V, IOUT=30mA
C =CL=1.0uF (ceramic)
VIN=CE=2.8V, IOUT=30mA
C =CL=1.0uF (ceramic)
IN
IN
3.1
1.9
1.85
1.8
3.05
3
2.95
1.75
2.9
1.7
-50
-25
0
25
50
75
100
-50
-25
0
25
50
75
100
Ambient Temperature: Topr (
)
℃
Ambient Temperature: Topr (
)
℃
13/23
XC6221 Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(5) Supply Current vs. Input Voltage
XC6221x182
CE=VIN, C =CL=1.0uF (ceramic)
XC6221x302
CE=VIN, C =CL=1.0uF (ceramic)
IN
IN
70
60
50
40
30
20
10
0
70
60
50
40
30
20
10
0
Topr=85
Topr=25
℃
Topr=85
Topr=25
℃
℃
℃
Topr=-40
℃
Topr=-40
℃
0
1
2
3
4
5
6
0
1
2
3
4
5
6
Input Voltage: VIN (V)
Input Voltage:VIN (V)
(6) CL-Discharge Resistance vs. Ambient Temperature
XC6221B
VIN=6.0V, CE=VSS, VOUT =4.0V
C =CL=1.0uF (ceramic)
IN
1200
1000
800
600
400
200
0
-50
-25
0
25
50
75
100
Ambient Temperature: Topr (
)
℃
(7) Load Transient Response
XC6221x302
XC6221x182
V
IN=CE=2.8V, Tr=Tf=5us
V
IN=CE=4.0V, Tr=Tf=5us
Topr=25 , C =CL=1uF (ceramic)
IN
Topr=25 , C =CL=1uF (ceramic)
IN
℃
℃
1.9
1.8
1.7
1.6
1.5
1.4
1.3
300
3.1
3
300
250
200
150
100
50
Output Voltage
Output Voltage
250
200
150
100
50
2.9
2.8
2.7
2.6
2.5
Output Current
Output Current
0
0
Time (500us/div)
Time (500us/div)
14/23
XC6221
Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(8) Line Transient Response
XC6221x182
XC6221x182
CE=VIN, Tr=Tf=5us
CE=VIN, Tr=Tf=5us
I
OUT=30mA, Topr=25 , CL=1uF (ceramic)
℃
IOUT =1mA, Topr=25 , C =1uF (ceramic)
℃
L
5
4
2
5
4
2
Input Voltage
Input Voltage
1.95
1.9
1.85
1.8
1.75
1.7
1.95
1.9
1.85
1.8
1.75
1.7
3
3
2
2
Output Voltage
Output Voltage
1
1
0
0
-1
-1
Time (20us/div)
Time (20us/div)
XC6221x182
XC6221x302
CE=VIN, Tr=Tf=5us
CE=VIN,Tr=Tf=5us
=1uF (ceramic)
I
OUT=100mA, Topr=25 , C
L
=1uF (ceramic)
I
OUT=1mA, Topr=25 , C
L
℃
℃
5
4
3
2
1
0
2
6
3.2
3.15
3.1
3.05
3
Input Voltage
Input Voltage
1.95
1.9
1.85
1.8
1.75
1.7
5
4
3
2
1
0
Output Voltage
Output Voltage
2.95
2.9
-1
Time (20us/div)
Time (20us/div)
XC6221x302
CE=V , Tr=Tf=5us
XC6221x302
CE=V , Tr=Tf=5us
IN
IN
I
=30mA, Topr=25 , C =1uF (ceramic)
I
=100mA, Topr=25 , C =1uF (ceramic)
OUT L
℃
OUT
L
℃
6
3.2
3.15
3.1
3.05
3
6
3.2
3.15
3.1
3.05
3
Input Voltage
Input Voltage
5
4
3
2
1
0
5
4
3
2
1
0
Output Voltage
Output Voltage
2.95
2.9
2.95
2.9
Time (20us/div)
Time (20us/div)
15/23
XC6221 Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(9) Input Rise Characteristics
XC6221x182xx
XC6221x182xx
CE=VIN, Tr=5us
CE=VIN, Tr=5us
IOUT=1mA, Topr=25 , CL=1.0uF (ceramic)
IOUT=30mA, Topr=25 , CL=1.0uF (ceramic)
℃
℃
4
3
7
6
5
4
3
2
1
0
4
3
7
6
5
4
3
2
1
0
Input Voltage
Input Voltage
2
2
1
1
0
0
Output Voltage
Output Voltage
-1
-2
-3
-1
-2
-3
Time (40us/div)
Time (40us/div)
XC6221x182
XC6221x302
CE=VIN, Tr=5us
CE=VIN, Tr=5us
I
OUT=100mA, Topr=25 , CL=1.0uF (ceramic)
IOUT=1mA, Topr=25 , CL=1.0uF (ceramic)
℃
℃
4
7
6
5
4
3
2
1
0
5
4
8
Input Voltage
Input Voltage
7
6
5
4
3
2
1
0
3
2
3
2
1
1
Output Voltage
0
0
Output Voltage
-1
-2
-3
-1
-2
-3
Time (40us/div)
Time (40us/div)
XC6221x302
XC6221x302
CE=VIN, Tr=5us
CE=VIN, Tr=5us
IOUT=30mA, Topr=25 , CL=1.0uF (ceramic)
℃
IOUT=100mA, Topr=25 , CL=1.0uF (ceramic)
℃
5
8
5
8
7
6
5
4
3
2
1
0
Input Voltage
Input Voltage
4
3
7
6
5
4
3
2
1
0
4
3
2
2
1
1
Output Voltage
Output Voltage
0
0
-1
-2
-3
-1
-2
-3
Time (40us/div)
Time (40us/div)
16/23
XC6221
Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(10) CE Rise Characteristics
XC6221x182
XC6221x182
VIN=2.8V, Tr=5us
VIN=2.8V, Tr=5us
IOUT=1mA, Topr=25 , C =CL=1.0uF (ceramic)
IN
℃
IOUT=30mA, Topr=25 , C =CL=1.0uF (ceramic)
IN
℃
5
4
8
7
6
5
4
3
2
1
0
5
4
8
7
6
5
4
3
2
1
0
CEInput Voltage
CEInput Voltage
3
3
2
2
1
1
0
0
Output Voltage
Output Voltage
-1
-2
-3
-1
-2
-3
Time (40us/div)
Time (40us/div)
XC6221x182
XC6221x302
V
IN=2.8V, Tr=5us
VIN=4.0V, Tr=5us
IOUT=100mA, Topr=25 , C =CL=1.0uF (ceramic)
IN
IOUT=1mA, Topr=25 , C =CL=1.0uF (ceramic)
IN
℃
℃
5
4
3
2
1
0
8
7
6
5
4
3
2
1
0
5
8
CEInput Voltage
4
3
7
6
5
4
3
2
1
0
CEInput Voltage
2
1
Output Voltage
0
Output Voltage
-1
-2
-3
-1
-2
-3
Time (40us/div)
Time (40us/div)
XC6221x302
XC6221x302
V
IN=4.0V, Tr=5us
VIN=4.0V, Tr=5us
I
OUT=30mA, Topr=25 , C =CL=1.0uF (ceramic)
IN
I
OUT=100mA, Topr=25 , CIN=C
L
=1.0uF (ceramic)
℃
℃
5
4
8
7
6
5
4
3
2
1
0
5
4
3
2
1
0
8
7
6
5
4
3
2
1
0
CEInput Voltage:
CEInput Voltage
3
2
1
Output Voltage
Output Voltage
0
-1
-2
-3
-1
-2
-3
Time (40us/div)
Time (40us/div)
17/23
XC6221 Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(11) Ripple Rejection Rate
XC6221x182
VIN=CE=2.8VDC+0.5Vp-pAC
IOUT=30mA, Topr=25 , CL=1.0uF (ceramic)
XC6221x302
VIN=CE=4.0VDC+0.5Vp-pAC,
IOUT =30mA, Topr=25 , C =1.0uF (ceramic)
,
℃
℃
L
80
70
60
50
40
30
20
10
0
80
70
60
50
40
30
20
10
0
0.01
0.1
1
10
100
1000
0.01
0.1
1
10
100
1000
Ripple Frequency: f (kHz)
Ripple Frequency: f (kHz)
18/23
XC6221
Series
■PACKAGING INFORMATION
●USP-4
●SOT-25
* Soldering fillet surface is not formed
because the sides of the pins are plated.
●SSOT-24
●USPN-4
19/23
XC6221 Series
■PACKAGING INFORMATION (Continued)
●USP-4 Reference Pattern Layout
●USP-4 Reference Metal Mask Design
●USPN-4 Reference Pattern Layout
●USPN-4 Reference Metal Mask Design
20/23
XC6221
Series
■MARKING RULE
●SOT-25 / USP-4
①Represents product series
5
4
MARK
PRODUCT SERIES
XC6221******
XC6221S*****
3
①
②
③
④
⑤
1
2
4
3
1
2
3
SOT-25
(TOP VIEW)
USP-4
(TOP VIEW)
②Represents type of regulator
MARK
OUTPUT VOLTAGE 0.1V INCREMENTS OUTPUT VOLTAGE 0.05V INCREMENTS
PRODUCT SERIES
VOUT =0.8～3.0V
VOUT =3.1～5.0V
VOUT =0.85～3.05V
VOUT =3.15～4.95V
V
X
A
B
E
F
L
XC6221A*****
XC6221B*****
M
Custom products：Represents last 1 digits of registered serial number.
0 to 9, reverse character 0 to 9 repeated (G, I, J, O, Q, W excepted)
ex.) CUSTOM PRODUCTS
MARK
0
SERIAL
01
PRODUCT SERIES
XC6221S01XM*
③Represents output voltage
MARK
OUTPUT VOLTAGE (V)
MARK
OUTPUT VOLTAGE (V)
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
-
-
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
4.0
4.1
4.2
4.3
4.4
4.5
-
-
3.15
3.25
3.35
3.45
3.55
3.65
3.75
3.85
3.95
4.05
4.15
4.25
4.35
4.45
4.55
F
H
K
L
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
3.0
4.6
1.65
1.75
1.85
1.95
2.05
2.15
2.25
2.35
2.45
2.55
2.65
2.75
2.85
2.95
3.05
4.65
4.7
4.75
-
-
4.8
4.85
-
-
4.9
4.95
-
-
M
N
P
R
S
T
5.0
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
0.85
0.95
1.05
1.15
1.25
1.35
1.45
1.55
U
V
X
Y
Z
Custom products：Represents last 1 digits of registered serial number.
0 to 9, reverse character 0 to 9 repeated (G, I, J, O, Q, W excepted)
ex.) CUSTOM PRODUCTS
MARK
0
SERIAL
01
PRODUCT SERIES
XC6221S01XM*
④⑤Represents production lot number
01, …, 09, 10, 11, …99, 0A, …,0Z, 1A, … 9Z, A0, …, Z9, AA, …, ZZ repeated.
(G, I, J, O, Q, W excepted)
*No character inversion used.
21/23
XC6221 Series
■MARKING RULE (Continued)
●SSOT-24
●USPN-4
4
3
4
3
1
2
1
2
USPN-4
（TOP VIEW）
SSOT-24
(TOP VIEW)
①Represents product series
MARK
OUTPUT VOLTAGE 0.1V INCREMENTS OUTPUT VOLTAGE 0.05V INCREMENTS
PRODUCT SERIES
VOUT =0.8～3.0V
VOUT =3.1～4.0V
VOUT =0.85～3.05V
VOUT=3.15～3.95V
9
D
F
A
C
E
H
XC6221A*****
XC6221B*****
B
* For the USPN-4 package, 0.8V≦VOUT(T)≦1.15V is under development.
②Represents output voltage
MARK
OUTPUT VOLTAGE (V)
MARK
OUTPUT VOLTAGE (V)
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
-
-
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
4.0
-
-
-
3.15
3.25
3.35
3.45
3.55
3.65
3.75
3.85
3.95
-
F
H
K
L
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
3.0
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
1.65
1.75
1.85
1.95
2.05
2.15
2.25
2.35
2.45
2.55
2.65
2.75
2.85
2.95
3.05
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
M
N
P
R
S
T
-
-
-
-
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
0.85
0.95
1.05
1.15
1.25
1.35
1.45
1.55
-
U
V
X
Y
Z
-
-
-
-
-
-
-
-
③④Represents production lot number
01, …, 09, 10, 11, …, 99, 0A, …, 0Z, 1A, …, 9Z, A0, …, Z9, AA, …, ZZ repeated.
(G, I, J, O, Q, W excepted)
*No character inversion used.
22/23
XC6221
Series
1. The products and product specifications contained herein are subject to change without
notice to improve performance characteristics. Consult us, or our representatives
before use, to confirm that the information in this datasheet is up to date.
2. We assume no responsibility for any infringement of patents, patent rights, or other
rights arising from the use of any information and circuitry in this datasheet.
3. Please ensure suitable shipping controls (including fail-safe designs and aging
protection) are in force for equipment employing products listed in this datasheet.
4. The products in this datasheet are not developed, designed, or approved for use with
such equipment whose failure of malfunction can be reasonably expected to directly
endanger the life of, or cause significant injury to, the user.
(e.g. Atomic energy; aerospace; transport; combustion and associated safety
equipment thereof.)
5. Please use the products listed in this datasheet within the specified ranges.
Should you wish to use the products under conditions exceeding the specifications,
please consult us or our representatives.
6. We assume no responsibility for damage or loss due to abnormal use.
7. All rights reserved. No part of this datasheet may be copied or reproduced without the
prior permission of TOREX SEMICONDUCTOR LTD.
23/23
相关型号：
©2020 ICPDF网 联系我们和版权申明