XC62EP5602MR [TOREX]

Regulator;


型号：	XC62EP5602MR
厂家：	Torex Semiconductor
描述：	Regulator
文件：	总1页 (文件大小：66K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

________________________________________________________________________________________________________________

●

XC62E Seriesꢀ_{Boosting Voltage Regulators}

DETAILS

General Description

Features

The XC62E series are a group of positive output voltage

regulators that can supply up to 1A of output current using an

external transistor.

Ultra low dropout voltage:

100mV @ 100mA

( Performance depends on the external transistor charac-

teristics )

Maximum Output Current: 1000mA

Low power and high accuracy are achieved through CMOS

process and laser trimming technologies.

The series consists of a high precision voltage reference, an

error correction circuit and a short-circuit protected output

driver.

Output Voltage Range: 2.0V to 6.0V in 0.1V increments

Highly Accurate: Setup voltage ± 2%

Low power consumption:TYP 50µA [ VOUT=5.0V ],

TYP 0.2µA [ Stand-by mode ]

In stand-by mode, supply current can be dramatically cut.

Since the input-output voltage differential is small, loss con-

trol efficiency is good.

Output voltage temperature characteristics:TYP± 100ppm/°C

Line regulation:TYP 0.1%/V

The XC62E is particularly suited for use with battery operated

portable products, and products where supply current regula-

tion is required.

Ultra small package: SOT-25 mini-mold

The series comes in an ultra small SOT-25 package.

In connection with the CE function, apart from the negative

logic XC62EP series, a positive logic XC62ER series ( cus-

tom ) is also available.

Pin Configuration

Pin Assignment

EXT

CE/CE

FUNCTION

NUMBER

NAME

VSS

VIN

VOUT

EXT

Ground

SupplyVoltage Input

RegulatedVoltage Output

Base Current Control

Chip Enable

VSS VIN VOUT

SOT-25

(TOP VIEW)

CE/CE

Block Diagram

VDD

VOUT

EXT

Current

Limit

Voltage

Reference

VSS

Ordering Information

XC62E×××××××

↑ ↑ ↑↑↑↑

b c d e f

DESIGNATOR

DESCRIPTION

DESIGNATOR

DESCRIPTION

CE pin Logic :

P = Negative

R = Positive

Package Type

M = SOT-25

Output Voltage :

30 = 3.0V

50 = 5.0V

Temperature Coefficients :

0 = ± 100ppm (typical)

Output Voltage Accuracy :

1 = ± 1.0% ( Semi-Custom )

2 = ± 2.0%

Device Orientation :

R = EmbossedTape ( Right )

L = EmbossedTape ( Left )

相关型号：