XC8107BC15ER-G [TOREX]
85mΩ High Function Power Switch; 85mÎ ©高功能电源开关型号: | XC8107BC15ER-G |
厂家: | Torex Semiconductor |
描述: | 85mΩ High Function Power Switch |
文件: | 总27页 (文件大小:707K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
XC8107 Series
ETR33003-002
85mΩ High Function Power Switch
■GENERAL DESCRIPTION
The XC8107 series is a P-channel MOSFET power switch IC with a low ON resistance. A current limit, reverse current
prevention (prevents reverse current from VOUT to VIN), soft start, thermal shutdown, and an under voltage lockout (UVLO) are
incorporated as protective functions. A flag function monitors the power switch status. The flag output has N-channel open
drain configuration, and it outputs Low level signal when over-current or overheating is detected, or when the reverse current
prevention is operated. The voltage level which is fed to CE pin determines the status of XC8107. The logic level of CE pin is
selectable between either one of active high or active low.
■APPLICATIONS
●Set Top Boxes
●Digital TVs
■FEATURES
Input Voltage
: 2.5V~5.5V
: 2A
Output Current
ON Resistance
: 85mΩ@VIN=5.0V (TYP.) *USP-6C
100mΩ@VIN=5.0V (TYP.) *SOT-25
: 40μA@ VIN=5.0V
●PCs
Supply Current
Stand-by Current
Flag Delay Time
●USB Ports/USB Hubs
●HDMI
: 0.1μA (MAX.)
: 7.5ms (TYP.)
* At over-current detection
: 4ms(TYP.)
* At reverse voltage detection
: Reverse Current Prevention
Thermal Shutdown
Protection Circuit
Under Voltage Lockout(UVLO)
Soft-start
: Flag Output
Functions
CE Pin Input Logic Selectable
: 2μs(TYP.) *Reference value
Current Limit Response Time
Operating Ambient Temperature
Packages
: -40℃~+105℃
: USP-6C, SOT-25
Environmentally Friendly
: EU RoHS Compliant, Pb Free
■
TYPICAL APPLICATION CIRCUIT
■TYPICAL PERFORMANCE
CHARACTERISTICS
XC8107xCxxxR
CIN=1.0μF(ceramic), CL=1.0μF(ceramic)
6.0
5.0
4.0
3.0
2.0
1.0
0.0
0.5A type
1.0A type
1.5A type
2.0A type
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0
Output Current : IOUT [A]
1/27
XC8107 Series
■BLOCK DIAGRAM
XC8107 Series
* Diodes inside the circuit are an ESD ptection diode and a parasitic diode.
2/27
XC8107
Series
■PRODUCT CLASSIFICATION
●Ordering Information
XC8107①②③④⑤⑥-⑦
DESIGNATOR
ITEM
SYMBOL
DESCRIPTION
A
B
①
CE Logic
Refer to Selection Guide
C
②
Protection Circuits Type
Maximum Output Current
Packages
D
05
0.5A
10
1.0A
③④
15
1.5A
20
2.0A
ER-G
MR-G
USP-6C (3,000/Reel)
SOT-25 (3,000/Reel)
(*1)
⑤⑥-⑦
(*1) The “-G” suffix denotes Halogen and Antimony free as well as being fully RoHS compliant.
●Selection Guide
CURRENT
LIMITTER
TYPE
CE LOGIC SELECTABLE
SOFT-START
AC
AD
BC
BD
Active High
Active High
Active Low
Active Low
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
REVERSE CURRENT
PREVENTION
TYPE
UVLO
FLG OUTPUT
AC
AD
BC
BD
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
THERMAL
LATCH
TYPE
SHUT DOWN
PROTECTION
AC
AD
BC
BD
Yes
Yes
Yes
Yes
No
Yes
No
Yes
3/27
XC8107 Series
■PIN CONFIGURATION
* The dissipation pad for the USP-6C packages should be solder-plated for mounting strength and heat dissipation.
Please refer to the reference mount pattern and metal masking. The dissipation pad should be connected to the VSS (No. 5) pin.
■PIN ASSIGNMENT
PIN NUMBER
PIN NAME
FUNCTIONS
USP-6C
SOT-25
1
2
3
4
5
6
1
-
VOUT
NC
Output
No connection
Fault Report
ON/OFF Control
Ground
3
4
2
5
FLG
CE
VSS
VIN
Power Input
■FUNCTION
TYPE
PIN NAME
SIGNAL
STATUS
Active
H
L
A
Stand-by
OPEN
H
Undefined State (*1)
CE
Stand-by
B
L
Active
OPEN
Undefined State (*1)
* Avoid leaving the CE pin open; set to any fixed voltage.
4/27
XC8107
Series
■ABSOLUTE MAXIMUM RATINGS
Ta=25℃
PARAMETER
SYMBOL
RATINGS
UNITS
Input Voltage
Output Voltage
Output Current
CE Input Voltage
FLG Pin Voltage
FLG Pin Current
VIN
VOUT
IOUT
VCE
-0.3~+6.0
-0.3~+6.0
2.8
V
V
A
-0.3~+6.0
-0.3~+6.0
V
VFLG
IFLG
V
15
120
mA
USP-6C
SOT-25
1000 (PCB mounted) (*2)
250
Power Dissipation
Pd
mW
600 (PCB mounted) (*2)
Operating Ambient Temperature
Storage Temperature
Topr
Tstg
-40~+105
℃
℃
-55~+125
* All voltages are described based on the VSS
.
(*1) Use with IOUT less than Pd/(VIN-VOUT).
(*2) This is a reference data taken by using the test board. Please refer to page 24 and 25 for details.
5/27
XC8107 Series
■ELECTRICAL CHARACTERISTICS
Ta=25℃
PARAMETER
Input Voltage
SYMBOL
VIN
CONDITIONS
MIN.
TYP.
MAX.
UNITS CIRCUIT
-
2.5
-
5.5
110
104
135
120
75
V
①
VIN=3.3V (*1)
-
-
-
-
-
100
85
mΩ
mΩ
mΩ
mΩ
μA
USP-6C
VIN=5.0V (*1)
VIN=3.3V (*1)
VIN=5.0V (*1)
On Resistance
RON
①
115
100
40
SOT-25
Supply Current
ISS
VOUT=OPEN
②
②
VIN=5.5V, VOUT=OPEN
Stand-by Current
ISTBY
VCE=VSS (XC8107A series)
VCE=VIN (XC8107B series)
-
-
0.01
0.01
1.0
1.0
μA
μA
VIN=5.5V, VOUT=0V
VCE=VSS (XC8107A series)
VCE=VIN (XC8107B series)
VOUT=VIN-0.3V,
Switch Leakage Current
ILEAK
②
0.81
0.90
1.40
1.90
2.40
0.45
0.70
0.95
1.20
0.99
A
A
A
A
A
A
A
A
XC8107xx05 series
VOUT=VIN-0.3V,
1.26
1.54
XC8107xx10 series
VOUT=VIN-0.3V,
Current Limit
ILIMT
①
1.71
2.09
XC8107xx15 series
VOUT=VIN-0.3V,
2.16
2.64
XC8107xx20 series
VOUT=0V,
-
-
-
-
-
-
-
-
XC8107xx05 series
VOUT=0V,
XC8107xx10 series
VOUT=0V,
Short-Circuit Current
ISHORT
①
①
XC8107xx15 series
VOUT=0V,
XC8107xx20 series
VIN=5.0V, VOUT: OPEN→0V
Measure from VOUT=0V
to when current falls below
a certain ILIM value
VIN=5.5V, XC8107A series
VIN=5.5V, XC8107B series
VIN=5.5V, XC8107A series
VIN=5.5V, XC8107B series
VIN=5.5V, VCE=5.5V
VIN=5.5V, VCE=0V
Current Limit Circuit
Response Time (*2)
tCLR
-
2.0
-
μs
1.5
-
-
-
-
-
-
-
5.5
0.8
0.8
5.5
0.1
0.1
CE "H" Level Voltage
CE "L" Level Voltage
VCEH
VCEL
V
V
①
①
-
1.5
-0.1
-0.1
CE "H" Level Current
CE "L" Level Current
ICEH
ICEL
μA
μA
①
①
UVLO Detected Voltage
VUVLOD
VIN: 2.2V→1.7V
1.8
1.9
2.0
V
①
UVLO Released Voltage
UVLO Hysteresis
VUVLOR
VUHYS
VIN: 1.7V→2.2V
1.9
-
2.0
0.1
2.1
-
V
V
①
①
-
NOTE:
Unless otherwise stated, VIN=5.0V, IOUT=1mA, VCE=VIN (XC8107A series) or VCE=VSS (XC8107B series)
(*1)
I
=0.25A (XC8107xx05 series), IOUT=0.5A (XC8107xx10 series), IOUT=0.75A (XC8107xx15series), IOUT=1.0A (XC8107xx20 series)
OUT
(*2) Design reference value. This parameter is provided only for reference.
6/27
XC8107
Series
■ELECTRICAL CHARACTERISTICS (Continued)
Ta=25℃
PARAMETER
turn-on time
SYMBOL
tDLY(ON)
CONDITIONS
MIN.
-
TYP.
0.60
MAX.
1.00
UNITS CIRCUIT
RLOAD=10Ω, VCE=0V→2.2V
ms
ms
Ω
①
①
③
③
①
①
turn-off time
tDLY(OFF)
RFLG
IFOFF
tFD1
RLOAD=10Ω, VCE=2.2V→0V
IFLG=10mA, VOUT=5.5V
-
-
0.08
15
0.13
20
FLG output FET
On-resistance
FLG output FET
Leakage Current
VIN=5.5V, VFLG=5.5V, VOUT=OPEN
over-current condition
-
0.01
7.5
0.1
8.5
4.7
μA
ms
ms
6.5
2.7
FLG delay time
tFD2
reverse-voltage condition
4.0
VIN=0V, VOUT=5.5V
Reverse Current
IREV
VCE=5.0V (XC8107A series)
VCE=VSS (XC8107B series)
-
0.1
1.0
μA
①
①
Reverse Current
Prevention
SOT-25
-
-
170
140
-
-
VIN: 5.0V→4.7V
VREV_D
mV
VOUT=5.0V
USP-6C
Detect Voltage
Thermal Shutdown
Detect Temperature
Thermal Shutdown
Release Temperature
Thermal Shutdown
Hysteresis Width
TTSD
TTSR
THYS
Junction Temperature
Junction Temperature
Junction Temperature
-
-
-
150
130
20
-
-
-
℃
℃
℃
①
①
①
NOTE:
Unless otherwise stated, VIN=5.0V, IOUT=1mA, VCE=VIN (XC8107A series) or VCE=VSS (XC8107B series)
■TIMING CHART
●turn-on time, turn-off time
XC8107 Series, Type A
XC8107 Series, Type B
7/27
XC8107 Series
■TEST CIRCUITS
CIN=1.0μF, CL=1.0μF
1) CIRCUIT①
2) CIRCUIT②
3) CIRCUIT③
VOUT
VIN
FLG
CE
A
VOUT
VIN
VFLG
VCE
VSS
V
V
V
CL
(ceramic)
CIN
(ceramic)
V
8/27
XC8107
Series
■OPERATIONAL EXPLANATION
The XC8107 series is a P-channel MOSFET power switch IC.
The XC8107 series consists of a CE circuit, UVLO circuit, thermal shutdown circuit, current limiter circuit, reverse current
prevention circuit, control block and others. The gate voltage of the power switch transistor is controlled with control block.
The current limiter circuit and reverse current prevention circuit will operate based on the output voltage and output current.
(See the BLOCK DIAGRAM below)
BLOCK DIAGRAM (XC8107 Series)
<CE Pin>
The voltage level which is fed to CE pin controls the status of this IC. If either “H” level or “L” level which is defined as the
electrical specification is fed to CE pin, then XC8107 can operate in standard manner. However, if the middle voltage which is
neither “H” level nor “L” level is fed to CE pin, the consumption current will increase due to the shoot-through current at internal
circuits. Also if CE pin is open, the status of XC8107 cannot be fixed and the behavior will be unstable.
<Thermal Shutdown>
For protection against heat damage of the ICs, thermal shutdown function is built in. When the internal junction temperature
reaches the temperature limit, the thermal shutdown circuit operates and the power switch transistor will turn OFF. The IC
resumes its operation when the thermal shutdown function is released and the IC’s operation is automatically restored because
the junction temperature drops to the level of the thermal shutdown release temperature. When the thermal shutdown circuit
detects higher junction temperature than the detect temperature, the voltage level of FLG pin is low level. When the thermal
shutdown circuit detects lower junction temperature than the release temperature, the thermal shutdown function is released
and the voltage level of FLG pin is high level.
<Under Voltage Lockout (UVLO) >
When the VIN pin voltage goes down to lower voltage than UVLO detected voltage, the power switch transistor turns OFF by
UVLO function in order to prevent false output caused by unstable operation of the internal circuitry. When the VIN pin voltage
goes up to higher voltage than UVLO released voltage, the UVLO function is released and the power switch transistor can turn
ON.
<Soft-start Function>
The soft-start circuit can reduce the in-rush current charged on the output capacitor when IC starts up. Additionally, due to the
reduction of the in-rush current, the circuit can reduce the fluctuation of the input voltage as well. The soft-start time is optimized
internally and defined as turn-on time. (TYP: 0.6ms)
9/27
XC8107 Series
■OPERATIONAL EXPLANATION (Continued)
<Current limiter, short-circuit protection>
When the output current reaches the current limit value, the constant current limiter circuit activates and as a result, the
output voltage goes down.
If the short circuit comes at the VOUT pin, the output current is limited to the current which is specified as the short-circuit current
value. If the over-current state lasts for 7.5ms (TYP.), the FLG pin changes to Low level output.
Two types are available for the current limiter circuit: an auto recovery type (product type C) and a latch off type (product type
D). After the current limiter circuit activates and the FLG pin outputs low level, the operation is different between these two
types.
The auto recovery type continuously limits the output current by the current limit value.
When the over-current status finishes and the status of that the output current is less than the current limit value continues for
7.5ms (TYP.) or more, the voltage of FLG pin goes up “H” level again.
The latch off type turns off the power switch transistor after the FLG pin outputs Low level. The off state is maintained
regardless of whether the over-current state is released.
Latch operation is released by turning off the IC with the CE pin signal and then restarting, or by lowering the input voltage
below the UVLO detected voltage once and after that raising it higher than UVLO released voltage.
<Reverse current prevention>
An internal circuit is built in that prevents reverse current from the VOUT pin to the VIN pin.
When the difference between input voltage and VOUT pin voltage is higher than the detect voltage set internally, the reverse
current prevention circuit activates, and the power switch transistor turns off, then the reverse current from the VOUT pin to the
VIN pin is reduced to 0.1μA (TYP.).
If the reverse-voltage state lasts for 4ms (TYP.), the FLG pin changes to Low level output.
Two types are available for the reverse current prevention circuit: the auto recovery type (product type C) and the latch off
type (product type D). After the reverse current prevention circuit activates and the FLG pin outputs low level, the operation is
different between these two types.
On the auto recovery type, when the output voltage drops below the input voltage, the reverse current prevention circuit stops
immediately, and the power switch transistor turns on again. If the output voltage remains lower than the input voltage for 4ms
(TYP.), the FLG pin returns to High level output.
On the latch off type, the power switch transistor remains in the off state even if the reverse voltage state is released.
Latch operation is released by turning off the IC with the CE pin signal and then restarting, or by lowering the input voltage
below the UVLO detected voltage once and after that raising it higher than UVLO released voltage.
10/27
XC8107
Series
■OPERATIONAL EXPLANATION (Continued)
<Flag function>
The flag circuit is built in which monitors the state of the power switch.
The FLG pin outputs Low level when the reverse current prevention function is operating. A resistance of 10kΩ to 100kΩ is
recommended for the FLG pin pull-up resistance.
Auto recovery type (product type C)
Protective function
FLG pin Low level output
Return to FLG pin High level output
Current limiter
Reverse current prevention
Thermal shutdown
7.5ms after over-current detection
4.0ms after reverse voltage detection
Same time as overheat state is detected
7.5ms after over-current release
4.0ms after reverse voltage release
Same time as overheat state is released
Latch off type (product type D)
Protective function
FLG pin Low level output
Return to FLG pin High level output
Current limiter
Reverse current prevention
Thermal shutdown
7.5ms after over-current detection
4.0ms after reverse voltage detection
Same time as overheat state is detected
When latch operation is released
When latch operation is released
Same time as overheat state is released
11/27
XC8107 Series
■NOTES ON USE
1. For the phenomenon of temporal and transitional voltage decrease or voltage increase, the IC may be damaged or
deteriorated if IC is used beyond the absolute MAX. specifications.
2. Where wiring impedance is high, operations may become unstable due to noise depending on output current.
Please keep the resistance low between VIN and VSS wiring in particular.
3. Please place the input capacitor (CIN) and the output capacitor (CL) as close to the IC as possible.
For the input or output capacitor, a capacitance of 1.0μF or higher is recommended.
4. When the voltage which is higher than the maximum input voltage is fed to the VIN pin, and VOUT is shorted to the VSS level, in
this case the short circuit may cause a fatal impact to operation for the IC. Please use within the operational voltage range.
5. Torex places an importance on improving our products and its reliability.
However, by any possibility, we would request user fail-safe design and post-aging treatment on system or equipment.
12/27
XC8107
Series
■TYPICAL PERFORMANCE CHARACTERISTICS
(1) UVLO detect Voltage vs. Input Voltage
(2) UVLO release Voltage vs. Input Voltage
XC8107xxxxxR
XC8107xxxxxR
CIN=1.0μF(ceramic), CL=1.0μF(ceramic)
CIN=1.0μF(ceramic), CL=1.0μF(ceramic)
3.0
2.5
2.0
1.5
1.0
0.5
0.0
3.0
2.5
2.0
1.5
1.0
0.5
0.0
Ta=105℃
Ta=25℃
Ta=-40℃
Ta=105℃
Ta=25℃
Ta=-40℃
1.70 1.75 1.80 1.85 1.90 1.95 2.00 2.05 2.10
Input Voltage : VIN [V]
1.70 1.75 1.80 1.85 1.90 1.95 2.00 2.05 2.10
Input Voltage : VIN [V]
(3) UVLO threshold Voltage vs. Ambient Temperature
XC8107xxxxxR
CIN=1.0μF(ceramic), CL=1.0μF(ceramic)
3.0
2.5
2.0
1.5
1.0
UVLO detect
UVLO release
0.5
0.0
-50 -25
0
25
50
75 100 125
Ambient Temperature : Ta [℃]
(4)ꢀStand-by Current vs. Input Voltage
XC8107xxxxxR
(5)ꢀStand-by Current vs. Ambient Temperature
XC8107xxxxxR
CIN=1.0μF(ceramic), CL=1.0μF(ceramic)
CIN=1.0μF(ceramic), CL=1.0μF(ceramic)
3.0
3.0
Ta=105℃
Istby
2.5
Ta=25℃
2.5
Ta=-40℃
2.0
2.0
1.5
1.0
0.5
0.0
1.5
1.0
0.5
0.0
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5
-50 -25
0
25
50
75 100 125
Input Voltage : VIN [V]
Ambient Temperature : Ta [℃]
13/27
XC8107 Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(6)ꢀSupply Current vs. Input Voltage(sweep up)
(7)ꢀSupply Current vs. Ambient Temperature
XC8107xxxxxR
XC8107xxxxxR
CIN=1.0μF(ceramic), CL=1.0μF(ceramic)
VIN=5.0V, CIN=1.0μF(ceramic), CL=1.0μF(ceramic)
50
50
45
40
35
30
25
20
45
40
35
30
25
20
Ta=105℃
15
Ta=25℃
15
VIN=5.0V
10
Ta=-40℃
10
5
5
0
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5
0
-50 -25
0
25
50
75 100 125
Input Voltage : VIN [V]
Ambient Temperature : Ta [℃]
(9)ꢀCE "L" Level Voltage vs. Input Voltage
XC8107xxxxxR
(8)ꢀCE "H" Level Voltage vs. Input Voltage
XC8107xxxxxR
CIN=1.0μF(ceramic), CL=1.0μF(ceramic)
CIN=1.0μF(ceramic), CL=1.0μF(ceramic)
3.0
3.0
2.5
2.0
1.5
2.5
2.0
1.5
Ta=105℃
1.0
1.0
Ta=105℃
Ta=25℃
Ta=25℃
0.5
0.5
Ta=-40℃
Ta=-40℃
0.0
0.0
0.0
0.5
1.0
1.5
2.0
2.5
0.0
0.5
1.0
1.5
2.0
2.5
Input Voltage : VIN [V]
Input Voltage : VIN [V]
(10)ꢀCE threshold Voltage vs. Ambient Temperature
XC8107xxxxxR
CIN=1.0μF(ceramic), CL=1.0μF(ceramic)
3.0
CE"H"Level
2.5
CE"L"Level
2.0
1.5
1.0
0.5
0.0
-50 -25
0
25
50
75 100 125
Ambient Temperature : Ta [℃]
14/27
XC8107
Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(11)ꢀOn Resistance vs. Input Voltage (SOT-25)
(12)ꢀOn Resistance
vs. Ambient Temperature (SOT-25)
XC8107xxxxMR
XC8107xxxxMR
CIN=1.0μF(ceramic), CL=1.0μF(ceramic)
CIN=1.0μF(ceramic), CL=1.0μF(ceramic)
180
180
160
140
120
100
80
160
140
120
100
80
VIN=2.5V
VIN=3.5V
VIN=4.5V
VIN=5.0V
VIN=5.5V
Ta=105℃
60
60
Ta=25℃
40
40
Ta=-40℃
20
20
0
0
2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0
Input Voltage : VIN [V]
-50 -25
0
25
50
75 100 125
Ambient Temperature : Ta [℃]
(13)ꢀOn Resistance vs. Input Voltage (USP-6C)
XC8107xxxxER
(14)ꢀOn Resistance
vs. Ambient Temperature (USP-6C)
XC8107xxxxER
CIN=1.0μF(ceramic), CL=1.0μF(ceramic)
CIN=1.0μF(ceramic), CL=1.0μF(ceramic)
180
180
160
140
120
100
80
160
140
120
100
80
VIN=2.5V
VIN=3.5V
VIN=4.5V
VIN=5.0V
VIN=5.5V
60
60
Ta=105℃
Ta=25℃
40
40
Ta=-40℃
20
20
0
0
2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0
Input Voltage : VIN [V]
-50 -25
0
25
50
75 100 125
Ambient Temperature : Ta [℃]
(15)ꢀturn-on time vs. Input Voltage
XC8107xxxxxR
(16)ꢀturn-on time vs. Ambient Temperature
XC8107xxxxxR
CIN=1.0μF(ceramic), CL=1.0μF(ceramic)
CIN=1.0μF(ceramic), CL=1.0μF(ceramic)
0.7
0.7
0.6
0.5
0.4
0.6
0.5
0.4
0.3
0.3
Ta=105℃
VIN=2.5V
Ta=25℃
0.2
VIN=3.5V
0.2
VIN=4.5V
Ta=-40℃
0.1
0.1
VIN=5.0V
VIN=5.5V
0.0
0.0
-50 -25
0
25
50
75 100 125
2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0
Input Voltage : VIN [V]
Ambient Temperature : Ta [℃]
15/27
XC8107 Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(17)ꢀturn-off time vs. Input Voltage
(18)ꢀturn-off time vs. Ambient Temperature
XC8107xxxxxR
XC8107xxxxxR
CIN=1.0μF(ceramic), CL=1.0μF(ceramic)
VIN=4.3V, CIN=1.0μF(ceramic), CL=1.0μF(ceramic)
0.09
0.09
0.08
0.07
0.06
0.05
0.04
0.03
0.02
0.01
0.00
0.08
0.07
0.06
0.05
VIN=2.5V
0.04
VIN=3.5V
Ta=105℃
Ta=25℃
Ta=-40℃
0.03
VIN=4.5V
VIN=5.0V
0.02
VIN=5.5V
0.01
0.00
2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0
Input Voltage : VIN [V]
-50 -25
0
25
50
75 100 125
Ambient Temperature : Ta [℃]
(19)ꢀFLG delay time over-current
vs. Ambient Temperature
(20)ꢀFLG delay time reverse-voltage
vs. Ambient Temperature
XC8107xxxxxR
XC8107xxxxxR
CIN=1.0μF(ceramic), CL=1.0μF(ceramic)
CIN=1.0μF(ceramic), CL=1.0μF(ceramic)
9.0
8.5
8.0
7.5
7.0
6.5
6.0
5.5
5.0
4.5
4.0
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
VIN=2.5V
VIN=3.5V
VIN=4.5V
VIN=5.0V
VIN=5.5V
VIN=2.5V
VIN=3.5V
VIN=4.5V
VIN=5.0V
-50 -25
0
25
50
75 100 125
-50 -25
0
25
50
75 100 125
Ambient Temperature : Ta [℃]
Ambient Temperature : Ta [℃]
(21)ꢀOutput Voltage vs. Output Current
XC8107xCxxxR
XC8107xDxxxR
CIN=1.0μF(ceramic), CL=1.0μF(ceramic)
CIN=1.0μF(ceramic), CL=1.0μF(ceramic)
6.0
5.0
4.0
3.0
2.0
1.0
0.0
6.0
5.0
4.0
3.0
2.0
1.0
0.0
0.5A type
1.0A type
1.5A type
2.0A type
0.5A type
1.0A type
1.5A type
2.0A type
If the over-current state lasts for 7.5ms,
the latch off type turns off the power switch transistor.
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0
Output Current : IOUT [A]
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0
Output Current : IOUT [A]
16/27
XC8107
Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(22)ꢀturn-on Delay vs. Rise Time (CL=1.0μF)
(23)ꢀturn-off Delay vs. Fall Time (CL=1.0μF)
XC8107xx10xR
XC8107xx10xR
V
CE=5.0V→0V, tf=5μs, RL=10Ω, Ta=25℃
VCE=0V→5.0V, tr=5μs, RL=10Ω, Ta=25℃
V
IN=5.0V, CIN=CL=1.0μF(ceramic)
V
IN=5.0V, CIN=CL=1.0μF(ceramic)
8.0
6.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
-0.5
8.0
6.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
-0.5
CE Input Voltage
Output Voltage
4.0
4.0
2.0
2.0
Output Voltage
0.0
0.0
CE Input Voltage
-2.0
-2.0
Supply Current
Supply Current
Time [100μs/div]
Time [100μs/div]
(24)ꢀturn-on Delay vs. Rise Time (CL=120μF)
XC8107xx10xR
(25)ꢀturn-off Delay vs. Fall Time (CL=120μF)
XC8107xx10xR
V
CE=5.0V→0V, tf=5μs, RL=10Ω, Ta=25℃
IN=5.0V, CIN=1.0μF, CL=120μF(ceramic)
V
CE=0V→5.0V, tr=5μs, RL=10Ω, Ta=25℃
IN=5.0V, CIN=1.0μF, CL=120μF(ceramic)
V
V
8.0
6.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
-0.5
8.0
6.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
-0.5
CE Input Voltage
4.0
4.0
Output Voltage
Output Voltage
2.0
2.0
0.0
0.0
CE Input Voltage
-2.0
-2.0
Supply Current
Supply Current
Time [500μs/div]
Time [500μs/div]
(26)ꢀShort Circuit Current, Device Enabled Into Short
XC8107xx10xR
XC8107xx10xR
VCE=5.0V→0V, tf=5μs, Ta=25℃
V
CE=0V→5.0V, tr=5μs, Ta=25℃
V
IN=5.0V, CIN=1.0μF, CL=120μF(ceramic)
V
IN=5.0V, CIN=CL=1.0μF(ceramic)
8.0
6.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
CE Input Voltage
8.0
6.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
-0.5
CE Input Voltage
4.0
4.0
2.0
2.0
0.0
0.0
Output Voltage
Supply Current
Output Voltage
Supply Current
-2.0
-2.0
-0.5
Time [40μs/div]
Time [40μs/div]
17/27
XC8107 Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(27)ꢀShort-Curcuit Transient Response
(VOUT=5.0Ω→short, CL=1.0μF)
(28)ꢀShort-Curcuit Transient Response
(VOUT=short→5.0Ω, CL=1.0μF)
XC8107xC10xR
XC8107xC10xR
V
IN=5.0V, tr=100μs, Ta=25℃
V
IN=5.0V, tf=100μs, Ta=25℃
FLG=100kΩ, CIN=CL=1.0μF(ceramic)
FLG=100kΩ, CIN=CL=1.0μF(ceramic)
8.0
6.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
-0.5
8.0
6.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
-0.5
VOUT = Removed Short circuit
VOUT = Short circuit to Vss
4.0
Output Voltage
FLG Voltage
4.0
2.0
2.0
FLG Voltage
0.0
0.0
Output Voltage
Supply Current
-2.0
-2.0
Supply Current
Time [2ms/div]
Time [2ms/div]
(29)ꢀShort-Curcuit Transient Response
(VOUT=open→short, CL=1.0μF)
(30)ꢀShort-Curcuit Transient Response
(VOUT=short→open, CL=1.0μF)
XC8107xC10xR
XC8107xC10xR
V
IN=5.0V, tr=100μs, Ta=25℃
V
IN=5.0V, tf=100μs, Ta=25℃
FLG=100kΩ, CIN=CL=1.0μF(ceramic)
FLG=100kΩ, CIN=CL=1.0μF(ceramic)
8.0
6.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
-0.5
VOUT = Removed Short circuit
8.0
6.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
-0.5
VOUT = Short circuit to Vss
4.0
Output Voltage
4.0
FLG Voltage
2.0
2.0
FLG Voltage
0.0
0.0
Output Voltage
-2.0
-2.0
Supply Current
Supply Current
Time [2ms/div]
Time [2ms/div]
(31)ꢀShort-Curcuit Transient Response
(VOUT=5.0Ω→short, CL=120μF)
(32)ꢀShort-Curcuit Transient Response
(VOUT=short→5.0Ω, CL=120μF)
XC8107xC10xR
XC8107xC10xR
V
IN=5.0V, tr=100μs, Ta=25℃
V
IN=5.0V, tf=100μs, Ta=25℃
FLG=100kΩ, CIN=1.0μF, CL=120μF(ceramic)
FLG=100kΩ, CIN=1.0μF, CL=120μF(ceramic)
8.0
6.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
-0.5
8.0
6.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
-0.5
VOUT = Removed Short circuit
VOUT = Short circuit to Vss
4.0
4.0
FLG Voltage
Output Voltage
FLG Voltage
2.0
2.0
0.0
0.0
Output Voltage
Supply Current
-2.0
-2.0
Supply Current
Time [2ms/div]
Time [2ms/div]
18/27
XC8107
Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(33)ꢀShort-Curcuit Transient Response
(VOUT=open→short, CL=120μF)
(34)ꢀShort-Curcuit Transient Response
(VOUT=short→open, CL=120μF)
XC8107xC10xR
XC8107xC10xR
V
IN=5.0V, tr=100μs, Ta=25℃
VIN=5.0V, tf=100μs, Ta=25℃
FLG=100kΩ, CIN=1.0μF, CL=120μF(ceramic)
8.0
FLG=100kΩ, CIN=1.0μF, CL=120μF(ceramic)
8.0
6.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
-0.5
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
-0.5
VOUT = Removed Short circuit
VOUT = Short circuit to Vss
6.0
4.0
FLG Voltage
Output Voltage
4.0
2.0
2.0
Output Voltage
FLG Voltage
0.0
0.0
-2.0
-40
-2.0
Supply Current
Supply Current
Time [2ms/div]
Time [2ms/div]
(35)ꢀUVLO Transient Response (CL=1.0μF)
XC8107xxxxxR
XC8107xxxxxR
VIN=5.0V→0V, tf=3ms, Ta=25℃
RL=5Ω, CIN=CL=1.0μF(ceramic)
V
IN=0V→5.0V, tr=3ms, Ta=25℃
RL=5Ω, CIN=CL=1.0μF(ceramic)
8.0
6.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
-0.5
8.0
6.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
-0.5
Input Voltage
Input Voltage
4.0
4.0
2.0
2.0
Output Voltage
0.0
0.0
Output Voltage
-2.0
-2.0
Supply Current
Supply Current
Time [500μs/div]
Time [500μs/div]
(36)ꢀUVLO Transient Response (CL=120μF)
XC8107xxxxxR
XC8107xxxxxR
V
IN=0V→5.0V, tr=3ms, Ta=25℃
V
IN=5.0V→0V, tf=3ms, Ta=25℃
RL=5Ω, CIN=1.0μF, CL=120μF(ceramic)
RL=5Ω, CIN=1.0μF, CL=120μF(ceramic)
8.0
6.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
-0.5
8.0
6.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
-0.5
Output Voltage
Input Voltage
4.0
4.0
2.0
2.0
Output Voltage
0.0
0.0
Input Voltage
-2.0
-8.0
-2.0
-8.0
Supply Current
Supply Current
Time [500μs/div]
Time [500μs/div]
19/27
XC8107 Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(37)ꢀReverse Voltage Detected Voltage (CL=1.0μF)
(38)ꢀReverse Voltage Released Voltage (CL=1.0μF)
XC8107xxxxxR
XC8107xxxxxR
VIN=5.0V, RL=5Ω, Ta=25℃
CIN=CL=1.0μF(ceramic)
V
IN=5.0V, RL=5Ω, Ta=25℃
CIN=CL=1.0μF(ceramic)
8.0
6.0
6.0
5.0
4.0
3.0
2.0
1.0
0.0
-1.0
-2.0
8.0
6.0
6.0
5.0
4.0
3.0
2.0
1.0
0.0
-1.0
-2.0
VOUT=5.5V forced
VOUT = 5.5V Removed
Output Voltage
Input Voltage
4.0
Output Voltage
4.0
Input Voltage
2.0
2.0
FLG Voltage
FLG Voltage
0.0
0.0
-2.0
-2.0
Supply Current
Supply Current
Time [500μs/div]
Time [500μs/div]
(39)ꢀReverse Voltage Detected Voltage (CL=120μF)
XC8107xxxxxR
(40)ꢀReverse Voltage Released Voltage (CL=120μF)
XC8107xxxxxR
V
IN=5.0V, Ta=25℃
VIN=5.0V, Ta=25℃
CIN=1.0μF, CL=120μF(ceramic)
C
IN=1.0μF, CL=120μF(ceramic)
8.0
6.0
6.0
5.0
4.0
3.0
2.0
1.0
0.0
-1.0
-2.0
8.0
6.0
6.0
5.0
4.0
3.0
2.0
1.0
0.0
-1.0
-2.0
VOUT = 5.5V Removed
VOUT=5.5V forced
Output Voltage
Input Voltage
Output Voltage
4.0
4.0
Input Voltage
2.0
2.0
FLG Voltage
FLG Voltage
0.0
0.0
-2.0
-2.0
Supply Current
Supply Current
Time [500μs/div]
Time [500μs/div]
(41)ꢀCE Transient Response
XC8107xxxxxR
XC8107xxxxxR
VCE=0→5.0V, tr=5μs, Ta=25℃
VCE=0→5.0V, tr=5μs, Ta=25℃
VIN=5.0V, CIN=CL=1.0μF(ceramic)
VIN=5.0V, CIN=1.0μF, CL=120μF(ceramic)
8.0
6.0
0.035
0.030
0.025
0.020
0.015
0.010
0.005
0.000
-0.005
8.0
6.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
-0.5
CE Voltage
CE Voltage
4.0
4.0
2.0
2.0
0.5A type
1.0A type
1.5A type
2.0A type
0.0
0.0
0.5A type
1.0A type
1.5A type
2.0A type
-2.0
-2.0
In Rush Current
In Rush Current
Time [500μs/div]
Time [500μs/div]
20/27
XC8107
Series
■ TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(42)ꢀShort Applied
(43)ꢀCurrent Limit adapted time
XC8107xx10xR
XC8107xx10xR
V
IN=5.0V, Ta=25℃
CL=open
VIN=5.0V, Ta=25℃
CL=open
8.0
14.0
12.0
10.0
8.0
15
14
13
12
11
10
9
VOUT = Short circuit to Vss
6.0
4.0
2.0
Output Voltage
8
7
0.0
6.0
6
5
4
3
2
1
0
-2.0
4.0
2.0
In Rush Current
0.0
-2.0
0.0
1.0
2.0
3.0
4.0
5.0
6.0
Time [2μs/div]
Peak Limit Current [A]
21/27
XC8107 Series
■PACKAGING INFORMATION
●USP-6C (unit:mm)
1.8±0.05
1pin INDENT
0.05
0.30±0.05
(0.1)
(0.50)
0.20±0.05
0.10±0.05
1.4±0.05
●SOT-25 (unit:mm)
22/27
XC8107
Series
■PACKAGING INFORMATION (Continued)
●USP-6C Reference Pattern Layout (unit: mm)
●USP-6C Reference Metal Mask Design (unit: mm)
23/27
XC8107 Series
■PACKAGING INFORMATION (Continued)
●
SOT-25 Power Dissipation
Power dissipation data for the SOT-25 is shown in this page.
The value of power dissipation varies with the mount board conditions.
Please use this data as the reference data taken in the following condition.
1. Measurement Condition
40.0
28.9
Condition: Mount on a board
Ambient: Natural convection
Soldering: Lead (Pb) free
Board: Dimensions 40 x 40 mm (1600 mm2 in one side)
Copper (Cu) traces occupy 50% of the board area
In top and back faces
Package heat-sink is tied to the copper traces
(Board of SOT-26 is used)
Material: Glass Epoxy (FR-4)
Thickness: 1.6mm
Through-hole 4 x 0.8 Diameter
1.4
2.54
Evaluation Board (Unit: mm)
2. Power Dissipation vs. Ambient Temperature (105℃)
Board Mount (Tjmax=125℃)
Ambient Temperature (℃)
Power Dissipation Pd (mW)
Thermal Resistance (℃/W)
25
600
120
166.67
105
Pd vs. Ta
700
600
500
400
300
200
100
0
25
45
65
85
105
125
Ambient Temperature: Ta (℃)
24/27
XC8107
Series
■PACKAGING INFORMATION (Continued)
●
USP-6C Power Dissipation
Power dissipation data for the USP-6C is shown in this page.
The value of power dissipation varies with the mount board conditions.
Please use this data as the reference data taken in the following condition.
1. Measurement Condition
Condition: Mount on a board
Ambient: Natural convection
Soldering: Lead (Pb) free
Board: Dimensions 40 x 40 mm (1600 mm2 in one side)
Copper (Cu) traces occupy 50% of the board area
In top and back faces
Package heat-sink is tied to the copper traces
Material: Glass Epoxy (FR-4)
Thickness: 1.6mm
Through-hole 4 x 0.8 Diameter
Evaluatn Board (Un: mm)
2. Power Dissipation vs. Ambient Temperature (105℃)
Board Mount (Tjmax=125℃)
Ambient Temperature (℃)
Power Dissipation Pd (mW)
Thermal Resistance (℃/W)
25
1000
200
100.00
105
Pd vs. Ta
1200
1000
800
600
400
200
0
25
45
65
85
105
125
Ambient Temperature: Ta (℃)
25/27
XC8107 Series
■MARKING RULE
① represents products series
SOT-25
MARK
Z
PRODUCT SERIES
XC8107******-G
5
4
② represents product type
①
②
③
④
⑤
PROTECTION CIRCUIT TYPE
MARK
CE LOGIC
Active High
Active High
Active Low
Active Low
PRODUCT SERIES
XC8107AC****-G
XC8107AD****-G
XC8107BC****-G
XC8107BD****-G
1
2
3
4
Auto-recovery
Latch-off
1
2
3
Auto-recovery
Latch-off
USP-6C
③ represents maximum output current
1
2
3
6
MARK
CURRENT (A)
PRODUCT SERIES
5
4
1
2
3
4
0.5
1.0
1.5
2.0
XC8107**05**-G
XC8107**10**-G
XC8107**15**-G
XC8107**20**-G
④⑤ represents production lot number
01~09, 0A~0Z, 11~9Z, A1~A9, AA~AZ, B1~ZZ in order.
(G, I, J, O, Q, W excluded)
* No character inversion used.
26/27
XC8107
Series
1. The products and product specifications contained herein are subject to change without
notice to improve performance characteristics. Consult us, or our representatives
before use, to confirm that the information in this datasheet is up to date.
2. We assume no responsibility for any infringement of patents, patent rights, or other
rights arising from the use of any information and circuitry in this datasheet.
3. Please ensure suitable shipping controls (including fail-safe designs and aging
protection) are in force for equipment employing products listed in this datasheet.
4. The products in this datasheet are not developed, designed, or approved for use with
such equipment whose failure of malfunction can be reasonably expected to directly
endanger the life of, or cause significant injury to, the user.
(e.g. Atomic energy; aerospace; transport; combustion and associated safety
equipment thereof.)
5. Please use the products listed in this datasheet within the specified ranges.
Should you wish to use the products under conditions exceeding the specifications,
please consult us or our representatives.
6. We assume no responsibility for damage or loss due to abnormal use.
7. All rights reserved. No part of this datasheet may be copied or reproduced without the
prior permission of TOREX SEMICONDUCTOR LTD.
27/27
相关型号:
©2020 ICPDF网 联系我们和版权申明