XE61CN1602PR [TOREX]
Standard Voltage Detectors (VDF=1.6V~6.0V); 标准电压检测器( VDF = 1.6V 〜 6.0V )型号: | XE61CN1602PR |
厂家: | Torex Semiconductor |
描述: | Standard Voltage Detectors (VDF=1.6V~6.0V) |
文件: | 总15页 (文件大小:335K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
XE61CSeries
ETR0208-004
Standard Voltage Detectors (VDF=1.6V~6.0V)
■GENERAL DESCRIPTION
The XE61C series is a highly precise, low power consumption voltage detector, manufactured using CMOS process and laser
trimming technologies.
Detect voltage is extremely accurate with minimal temperature drift.
Both CMOS and N-channel open drain output configurations are available.
The XE61C assures all temperature range (Ta= - 40OC ~ + 85OC).
■FEATURES
■APPLICATIONS
●Microprocessor reset circuitry
●Memory battery back-up circuits
●Power-on reset circuits
Detect Voltage Accuracy : ± 2% (Ta=25OC)
± 4% (Ta=-40OC~+85℃)
: 1.6V~6.0V (0.1V increments)
Detect Voltage
Temperature Characteristics : ±400ppm/℃ (Ta=- 40 C~+85 C)
Operating Voltage Range : 0.7V~10.0V
Low Power Consumption : 0.7μA TYP. (VIN=1.5V)
Output Configuration
Packages
O
O
●Power failure detection
●System battery life and charge voltage monitors
: N-channel open drain or CMOS
: SOT-23
SOT-89
Environmentally Friendly
: EU RoHS Compliant, Pb Free
■TYPICAL PERFORMANCE
■TYPICAL APPLICATION CIRCUITS
CHARACTERISTICS
XE61CC4502 (4.5V)
3.5
3.0
2.5
2.0
Ta=85
℃
25
℃
1.5
1.0
0.5
0
-40
℃
0
2
4
6
8
10
Input Voltage: VIN (V)
ꢀ
1/15
XE61C Series
■PIN CONFIGURATION
■PIN ASSIGNMENT
PIN NUMBER
PIN NAME
FUNCTION
SOT-23
SOT-89
3
2
1
-
2
3
1
VIN
VSS
VOUT
NC
Supply Voltage
Ground
Output
No Connection
■PRODUCT CLASSIFICATION
●Ordering Information
*1
(
)
XE61C①②③④⑤⑥⑦-⑧
DESIGNATOR
DESCRIPTION
SYMBOL
DESCRIPTION
C
N
CMOS output
①
Output Configuration
N-ch open drain output
e.g.1.6V → ②1, ③6
No delay
② ③
④
Detect Voltage (VDF)
Output Delay
16 ~ 60
0
⑤
Detect Accuracy
2
Within ±2%
MR
MR-G
PR
SOT-23
Packages
Taping Type (*2)
⑥⑦-⑧
SOT-23 (Halogen & Antimony free)
SOT-89
(*1)
The “-G” suffix indicates that the products are Halogen and Antimony free as well as being fully RoHS compliant.
The device orientation is fixed in its embossed tape pocket. For reverse orientation, please contact your local Torex sales office or
representative. (Standard orientation: ⑥R-⑧, Reverse orientation: ⑥L-⑧)
(*2)
2/15
XE61C
Series
■BLOCK DIAGRAMS
(1) CMOS Output
(2) N-ch Open Drain Output
■ABSOLUTE MAXIMUM RATINGS
Ta = 25OC
UNITS
PARAMETER
Input Voltage
Output Current
SYMBOL
RATINGS
12.0
VIN
V
IOUT
50
mA
CMOS
VSS -0.3 ~ VIN +0.3
VSS -0.3 ~ 12.0
250
Output Voltage
VOUT
Pd
V
N-ch Open Drain Output
SOT-23
Power Dissipation
mW
SOT-89
500
- 40~+85
-55~+125
OC
OC
Operating Temperature Range
Storage Temperature Range
Topr
Tstg
3/15
XE61C Series
■ELECTRICAL CHARACTERISTICS
XE61C Series
VDF(T)=1.6~6.0V, Ta= - 40℃ ~ 85℃
CIRCUITS
PARAMETER
Detect Voltage
SYMBOL
VDF
CONDITIONS
MIN.
TYP.
VDF(T)
VDF
MAX. UNITS
VDF(T)
x 0.96
VDF
VDF(T)
V
1
x 1.04
VDF
V
Hysteresis Width
VHYS
1
x 0.02 x 0.05
x 0.08
VIN = 1.5V
VIN = 2.0V
VIN = 3.0V
VIN = 4.0V
VIN = 5.0V
-
-
0.7
0.8
2.8
3.3
Supply Current
ISS
VIN
μA
2
1
3
-
0.9
3.5
-
1.0
3.7
-
1.1
3.9
Operating Voltage
VDF(T) = 1.6V to 6.0V
VIN = 1.0V
0.7
0.4
3.0
5.0
6.0
7.0
-
-
10.0
V
2.2
-
VIN = 2.0V
VIN = 3.0V
VIN = 4.0V
VIN = 5.0V
VIN = 8.0V
7.7
-
N-ch VDS = 0.5V
10.1
11.5
13.0
-10.0
-
Output Current
IOUT
Ileak
mA
nA
-
-
CMOS, P-ch VDS = 2.1V,
-2.0
4
Leakage Current
(CMOS Output)
Leakage Current
(N-ch Open Drain Output)
Temperature
-
-
-
-
10
10
-
VIN=10.0V
3
VOUT=10.0V
Ileak
400
ΔVDF
ppm/
℃
-40℃ ≦ Topr ≦ 85℃
±100
0.03
±400
0.20
-
Characteristics
Δ
Topr・
V
DF
Delay Time
TDLY
Inverts from VDR to VOUT
ms
5
(VDR→VOUT inversion)
NOTE:
VDF (T): Nominal detect voltage
Release Voltage: VDR = VDF + VHYS
4/15
XE61C
Series
■OPERATIONAL EXPLANATION
(Especially explained for the CMOS output products)
① When input voltage (VIN) rises above detect voltage (VDF), output voltage (VOUT) will be equal to VIN.
(A condition of high impedance exists with N-ch open drain output configurations.)
② When input voltage (VIN) falls below detect voltage (VDF), output voltage (VOUT) will be equal to the ground voltage
(VSS) level.
③ When input voltage (VIN) falls to a level below that of the minimum operating voltage (VMIN), output will become
unstable. In this condition, VIN will equal the pulled-up output (should output be pulled-up.)
④ When input voltage (VIN) rises above the ground voltage (VSS) level, output will be unstable at levels below the
minimum operating voltage (VMIN). Between the VMIN and detect release voltage (VDR) levels, the ground voltage (VSS)
level will be maintained.
⑤ When input voltage (VIN) rises above detect release voltage (VDR), output voltage (VOUT) will be equal to VIN.
(A condition of high impedance exists with N-ch open drain output configurations.)
⑥ The difference between VDR and VDF represents the hysteresis range.
●Timing Chart
5/15
XE61C Series
■NOTES ON USE
1. Please use this IC within the stated maximum ratings. Operation beyond these limits may cause degrading or permanent
damage to the device.
2. When a resistor is connected between the VIN pin and the input with CMOS output configurations, oscillation may occur
as a result of voltage drops at RIN if load current (IOUT) exists. (refer to the Oscillation Description (1) below)
3. When a resistor is connected between the VIN pin and the input with CMOS output configurations, irrespective of N-ch
output configurations, oscillation may occur as a result of through current at the time of voltage release even if load
current (IOUT) does not exist. (refer to the Oscillation Description (2) below )
4. With a resistor connected between the VIN pin and the input, detect and release voltage will rise as a result of the IC's
supply current flowing through the VIN pin.
5. In order to stabilize the IC's operations, please ensure that VIN pin's input frequency's rise and fall times are more than
several μ sec / V.
6. Please use N-ch open drains configuration, when a resistor RIN is connected between the VIN pin and power source.
In such cases, please ensure that RIN is less than 10kΩ and that C is more than 0.1μF.
XE61CN Series
RIN
V
IN
VOUT
C
V
SS
Figure 1: Circuit using an input resistor
●Oscillation Description
(1) Output current oscillation with the CMOS output configuration
When the voltage applied at IN rises, release operations commence and the detector's output voltage increases. Load
current (IOUT) will flow at RL. Because a voltage drop (RIN x IOUT) is produced at the RIN resistor, located between the input
(IN) and the VIN pin, the load current will flow via the IC's VIN pin. The voltage drop will also lead to a fall in the voltage level
at the VIN pin. When the VIN pin voltage level falls below the detect voltage level, detect operations will commence.
Following detect operations, load current flow will cease and since voltage drop at RIN will disappear, the voltage level at
the VIN pin will rise and release operations will begin over again.
Oscillation may occur with this " release - detect - release " repetition.
Further, this condition will also appear via means of a similar mechanism during detect operations.
(2) Oscillation as a result of through current
Since the XE61C series are CMOS IC S, through current will flow when the IC's internal circuit switching operates (during
release and detect operations). Consequently, oscillation is liable to occur as a result of drops in voltage at the through
current's resistor (RIN) during release voltage operations. (refer to Figure 3)
Since hysteresis exists during detect operations, oscillation is unlikely to occur.
IN
IN
XE61CC Series
XE61CN Series
XE61CC Series
6/15
XE61C
Series
100kΩ*
7/15
XE61C Series
■TYPICAL PERFORMANCE CHARACTERISTICS
(1) Supply Current vs. Input Voltage
XE61CC2702 (2.7V)
XE61CC1802 (1.8V)
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
Ta=85
℃
Ta=85
℃
25
25
℃
℃
-40
8
℃
-40
8
℃
0
2
4
6
10
0
2
4
6
10
Input Voltage: VIN (V)
Input Voltage: VIN (V)
ꢀ
ꢀ
XE61CC3602 (3.6V)
XE61CC4502 (4.5V)
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
Ta=85
℃
Ta=85
℃
25
℃
25
℃
-40
℃
-40
℃
0
2
4
6
8
10
0
2
4
6
8
10
Input Voltage: VIN (V)
Input Voltage: VIN (V)
ꢀ
ꢀ
(2) Detect, Release Voltage vs. Ambient Temperature
XE61CC1802 (1.8V)
1.90
XE61CC2702 (2.7V)
VDR
2.80
2.75
2.70
2.65
1.85
1.80
1.75
VDR
VDF
VDF
25
-50
-25
0
50
75
100
-50
-25
0
25
50
75
100
Ambient Temperature: Ta (
)
Ambient Temperature: Ta (
)
℃
℃
8/15
XE61C
Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(2) Detect, Release Voltage vs. Ambient Temperature (Continued)
XE61CC3602 (3.6V)
XE61CC4502 (4.5V)
VDR
3.8
3.7
3.6
3.5
4.7
4.6
4.5
4.4
VDR
VDF
VDF
-50
-25
0
25
50
75
100
-50
-25
0
25
50
75
100
Ambient Temperature: Ta (
)
Ambient Temperature: Ta (
)
℃
℃
(3) Output Voltage vs. Input Voltage
XE61CN1802 (1.8V)
2
XE61CN2702 (2.7V)
3
2
1
0
Ta=25
Ta=25
℃
℃
1
0
0
1
2
0
1
2
3
Input Voltage: VIN (V)
Input Voltage: VIN (V)
ꢀ
ꢀ
XE61CN3602 (3.6V)
XE61CN4502 (4.5V)
4
3
2
1
0
5
4
3
2
1
0
Ta=25
Ta=25
℃
℃
0
1
2
3
4
0
1
2
3
4
5
Input Voltage: VIN (V)
Input Voltage: VIN (V)
ꢀ
ꢀ
* Unless otherwise stated, the pull-up resistor’s value of the N-ch open drain output type is 100kΩ.
9/15
XE61C Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(4) N-ch Driver Output Current vs. VDS Characteristics
XE61CC1802 (1.8V)
VIN =1.5V
XE61CC2702 (2.7V)
10
8
30
25
20
15
10
5
Ta=25
℃
Ta=25
℃
VIN =2.5V
6
2.0V
4
1.0V
1.5V
2
1.0V
0
0
0
0.5
1.0
VDS (V)
1.5
2.0
0
0.5
1.0
1.5
VDS (V)
2.0
2.5
3.0
XE61CC3602 (3.6V)
XE61CC4502 (4.5V)
40
30
20
10
0
80
70
60
50
40
30
20
10
0
Ta=25
℃
Ta=25
℃
VIN =3.0V
2.5V
VIN =4.0V
3.5V
3.0V
2.0V
2.5V
2.0V
1.5V
1.5V
0
0.5
1.0
1.5
2.0
2.5
3.0
0
0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0
VDS (V)
VDS (V)
XE61CC1802 (1.8V)
VIN =0.8V
XE61CC2802 (2.7V)
1000
800
600
400
200
0
1000
800
600
400
200
0
Ta=25
Ta=25
℃
℃
VIN =0.8V
0.7V
0.7V
0
0.2
0.4
0.6
0.8
1.0
0
0.2
0.4
0.6
0.8
1.0
VDS (V)
VDS (V)
10/15
XE61C
Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(4) N-ch Driver Output Current vs. VDS Characteristics (Continued)
XE61CC3602 (3.6V)
XE61CC4502 (4.5V)
1000
800
600
400
200
0
1000
800
600
400
200
0
Ta=25
Ta=25
℃
℃
VIN =0.8V
VIN =0.8V
0.7V
0.7V
0
0.2
0.4
0.6
0.8
1.0
0
0.2
0.4
0.6
0.8
1.0
VDS (V)
VDS (V)
(5) N-ch Driver Output Current vs. Input Voltage
XE61CC1802 (1.8V)
15
XE61CC2702 (2.7V)
VDS=0.5V
25
20
15
10
5
VDS=0.5V
Ta=-40
℃
Ta=-40
℃
25
℃
10
5
25
℃
85
℃
85
℃
0
0
0
0.5
1.0
1.5
2.0
0
0.5
1.0
1.5
2.0
2.5
3.0
Input Voltage: VIN (V)
Input Voltage: VIN (V)
ꢀ
ꢀ
XE61CC3602 (3.6V)
XE61CC4502 (4.5V)
30
25
20
15
10
5
40
30
20
10
0
VDS=0.5V
VDS=0.5V
Ta=-40
Ta=-40
℃
℃
25
25
℃
℃
85
℃
85
℃
0
0
1
2
3
4
0
1
2
3
4
5
Input Voltage: VIN (V)
Input Voltage: VIN (V)
ꢀ
ꢀ
11/15
XE61C Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(6) P-ch Driver Output Current vs. Input Voltage
XE61CC1802 (1.8V)
VDS=2.1V
XE61CC2702 (2.7V)
VDS=2.1V
15
10
5
15
10
5
1.5V
1.0V
0.5V
1.5V
1.0V
0.5V
0
0
0
2
4
6
8
10
0
2
4
6
8
10
Input Voltage: VIN (V)
Input Voltage: VIN (V)
ꢀ
ꢀ
XE61CC3602 (3.6V)
VDS=2.1V
XE61CC4502 (4.5V)
15
10
5
15
10
5
VDS=2.1V
1.5V
1.0V
1.5V
1.0V
0.5V
0.5V
0
0
0
2
4
6
8
10
0
2
4
6
8
10
Input Voltage: VIN (V)
Input Voltage: VIN (V)
ꢀ
ꢀ
12/15
XE61C
Series
■PACKAGING INFORMATION
●SOT-23
●SOT-89
(unit : mm)
4.5±0.1
+0.03
-0.02
+0.15
1.6
0.4
-0.2
φ1.0
0.42±0.06 0.47±0.06
0.42±0.06
+0.03
-0.02
0.4
1.5±0.1
1.5±0.1
13/15
XE61C Series
■MARKING RULE
●SOT-23, SOT-89
a
e
b
c
g
d
a
b
c
d
④
③
②
①
①
e
②
f
③
g
④
h
f
h
SOT-23
(TOP VIEW)
SOT-89
(TOP VIEW)
① represents integer of output configuration and detect voltage
XE61CC Series (CMOS Output)
XE61CN Series (N-ch Open Drain Output)
MARK
VOLTAGE (V)
PRODUCT SEIRES
XE61CC1xxxxx
XE61CC2xxxxx
XE61CC3xxxxx
XE61CC4xxxxx
XE61CC5xxxxx
XE61CC6xxxxx
MARK
VOLTAGE (V)
PRODUCT SERIES
XE61CN1xxxxx
XE61CN2xxxxx
XE61CN3xxxxx
XE61CN4xxxxx
XE61CN5xxxxx
XE61CN6xxxxx
B
C
D
E
F
1.x
2.x
3.x
4.x
5.x
6.x
L
M
N
P
R
S
1.x
2.x
3.x
4.x
5.x
6.x
H
② represents decimal number of detect voltage
MARK
VOLTAGE (V)
PRODUCT SEIRES
XE61Cxxx3xxx
XE61Cxxx0xxx
3
0
x.3
x.0
③ represents delay time
MARK
DELAY TIME
No Delay
PRODUCT SERIES
XE61Cxxxx0xx
3
④ represents production lot number
Based on internal standard. (G, I, J, O, Q, W excluded)
Bar Mark: a, b, c, d
PRODUCTION YEAR
a
□
-
-
-
□
□
□
-
-
-
b
-
□
-
-
□
-
c
-
-
□
-
-
□
-
□
-
d
-
-
-
□
-
-
□
-
□
□
xxx0
xxx1
xxx2
xxx3
xxx4
xxx5
xxx6
xxx7
xxx8
xxx9
-
□
□
-
□
Bar Mark: e, f, g, h
PRODUCTION MONTH
January
e
□
-
-
-
□
□
□
-
-
-
□
f
-
□
-
-
□
-
g
-
-
□
-
-
□
-
□
-
□
□
-
h
-
-
-
□
-
-
□
-
□
□
-
February
March
April
May
June
July
August
September
October
November
December
-
□
□
-
□
□
□
□
14/15
XE61C
Series
1. The products and product specifications contained herein are subject to change without
notice to improve performance characteristics. Consult us, or our representatives
before use, to confirm that the information in this datasheet is up to date.
2. We assume no responsibility for any infringement of patents, patent rights, or other
rights arising from the use of any information and circuitry in this datasheet.
3. Please ensure suitable shipping controls (including fail-safe designs and aging
protection) are in force for equipment employing products listed in this datasheet.
4. The products in this datasheet are not developed, designed, or approved for use with
such equipment whose failure of malfunction can be reasonably expected to directly
endanger the life of, or cause significant injury to, the user.
(e.g. Atomic energy; aerospace; transport; combustion and associated safety
equipment thereof.)
5. Please use the products listed in this datasheet within the specified ranges.
Should you wish to use the products under conditions exceeding the specifications,
please consult us or our representatives.
6. We assume no responsibility for damage or loss due to abnormal use.
7. All rights reserved. No part of this datasheet may be copied or reproduced without the
prior permission of TOREX SEMICONDUCTOR LTD.
15/15
相关型号:
©2020 ICPDF网 联系我们和版权申明