XE6216B20B201PR [TOREX]
Voltage Regulators with Stand-by Function - Input Voltage: 28V; 稳压器具有待机功能 - 输入电压: 28V型号: | XE6216B20B201PR |
厂家: | Torex Semiconductor |
描述: | Voltage Regulators with Stand-by Function - Input Voltage: 28V |
文件: | 总29页 (文件大小:513K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
XC6216/XE6216Series
ETR0321_005
Voltage Regulators with Stand-by Function - Input Voltage: 28V
*XE6216 series are under development
■GENERAL DESCRIPTION
XC6216/XE6216 series are positive voltage regulator ICs with 28V of operation voltage. The series consists of a voltage
reference, an error amplifier, a current limiter, a thermal shutdown circuit and a phase compensation circuit plus a driver
transistor.
The output voltage is selectable in 100mV increments within the range of 2.0V to 12V using laser trimming technologies.
With external resistors, the output voltage range can be expanded from 2.0V to 23V. The series’ output stabilization
capacitor (CL) is also compatible with low ESR ceramic capacitors.
The over current protection circuit and the thermal shutdown circuit are built-in. These two protection circuits will operate
when the output current reaches current limit level or the junction temperature reaches temperature limit level.
The CE function enables the output to be turned off and the IC becomes a stand-by mode resulting in greatly reduced power
consumption.
■FEATURES
■APPLICATIONS
●Car audio, Car navigation systems
●Note book computers, PDAs
●Home appliances
Max Output Current
: More than 150mA (200mA limit)
(VIN=VOUT(T)+3.0V)
: 300mV@IOUT=20mA
Dropout Voltage
Input Voltage Range
Output Voltage
Setting Range
: 2.0V~28.0V
: 2.0V~12.0V (100mV increments)
2.0V~23V with external resistors
: Setting Voltage Accuracy±2%
(Setting Voltage Accuracy±1%
Possible)
●Audio visual equipment
(Cameras, VCRs, etc.)
High Accuracy
Low Power Consumption : 5μA
●Cordless phones,
Stand-by Current
: Less than 0.1μA
High Ripple Rejection
Operating Temperature
Low ESR Capacitor
: 30dB@1kHz
: -40℃~+85℃
: Ceramic Capacitor Compatible
Wireless communication equipment
Current Limit Circuit Built-In
Thermal Shutdown Circuit Built-In
Small Packages : SOT-25, SOT-89, SOT-89-5,
USP-6C, SOT-223, TO-252
■TYPICAL PERFORMANCE
CHARACTERISTICS
■TYPICAL APPLICATION CIRCUIT
●Output Voltage vs. Input Volatage
1/29
XC6216/XE6216 Series
■PIN CONFIGURATION
USP-6C
SOT-25
SOT-89
SOT-89-5
(BOTTOM VIEW)
(TOP VIEW)
(TOP VIEW)
(TOP VIEW)
* The dissipation pad for the USP-6C
package should be solder-plated in
recommended mount pattern and
metal masking so as to enhance
mounting strength and heat release.
If the pad needs to be connected to
other pins, it should be connected to
the VSS (No. 5) pin.
SOT-223
TO-252
(TOP VIEW)
(TOP VIEW)
■PIN ASSIGNMENT
●XC6216B/XE6216B Series
PIN NUMBER
PIN NAME
FUNCTIONS
SOT-25
SOT-89-5
USP-6C
1
2
3
4
5
-
5
2
4
3
1
-
6
5
4
3
1
2
VIN
VSS
NC
Power Input
Ground
No connection
ON/OFF Control
Output
CE
VOUT
NC
No connection
●XC6216C/XE6216C Series
PIN NUMBER
PIN NAME
FUNCTIONS
SOT-25
SOT-89-5
USP-6C
1
2
3
4
5
-
5
2
4
3
1
-
6
5
4
3
1
2
VIN
VSS
VOFB
CE
Power Input
Ground
Output Voltage Adjustment
ON/OFF Control
Output
VOUT
NC
No connection
●XC6216D/XE6216D Series
PIN NUMBER
PIN NAME
FUNCTIONS
SOT-89
SOT-223
TO-252
3
2
1
3
2
1
1
2
3
VIN
VSS
Power Input
Ground
VOUT
Output
2/29
XC6216/XE6216
Series
■PRODUCT CLASSIFICATION
●Ordering Information
XC6216①②③④⑤⑥
DESIGNATOR
DESCRIPTION
SYMBOL
DESCRIPTION
: Fixed output voltage, High Active
B
C
D
Type and Options of
Regulators
: Output voltage externally set, High Active
: Fixed output voltage, No CE function
①
: For the voltage within 2.0V ~9.9V;
e.g. 2.5V ⇒ 25
20 ~ 99
A, B, C
5.0V ⇒ 50
: For the voltage above 10.0V;
e.g. 10.6V ⇒ A6
11.2V ⇒ B2
②③
Output Voltage
12.0V ⇒ C0
: For C type (output voltage externally set), VOFB=2.0V only
20
2
: Output voltage 100mV increments, within ±2% accuracy
e.g. 2.5V ⇒ ②=2, ③=5, ④=2
Output Voltage
Accuracy
④
: Output voltage 100mV increments, within ±1% accuracy
e.g. 5.0V ⇒ ②=5, ③=0, ④=1
1
M
P
P
E
F
J
: SOT-25 ( for B and C types only)
: SOT-89 (for D type only)
: SOT-89-5 (for B and C types only)
: USP-6C (for B and C types only)
: SOT-223 (for D type only)
⑤
⑥
Packages
: TO-252 (for D type only)
R
L
: Embossed tape, standard feed
Device Orientation
: Embossed tape, reverse feed
XE6216①②③④⑤⑥
DESIGNATOR
DESCRIPTION
SYMBOL
DESCRIPTION
: Fixed output voltage, High Active
: Output voltage externally set, High Active
: For the voltage within 2.0V ~9.9V;
e.g. 2.5V ⇒ 25
Type and Options of
Regulators
B
C
①
20 ~ 99
5.0V ⇒ 50
: For the voltage above 10.0V;
②③
Output Voltage
e.g. 10.6V ⇒ A6
A, B, C
11.2V ⇒ B2
12.0V ⇒ C0
: For C type (output voltage externally set), VOFB=2.0V only
20
2
: Output voltage 100mV increments, Within ±2% accuracy
e.g. 2.5V ⇒ ②=2, ③=5, ④=2
Output Voltage
Accuracy
④
: Output voltage 100mV increments, Within ±1% accuracy
e.g. 5.0V ⇒ ②=5, ③=0, ④=1
1
M
P
P
E
R
L
: SOT-25 ( for B and C types only)
: SOT-89 (for D type only)
⑤
⑥
Package
: SOT-89-5 (for B and C types only)
: USP-6C (for B and C types only)
: Embossed tape, standard feed
Device Orientation
: Embossed tape, reverse feed
*1: The XE products are under development.
3/29
XC6216/XE6216 Series
■BLOCK DIAGRAMS
●XC6216B/XE6216B Series
(SOT-25, SOT-89-5, USP-6C)
●XC6216C/XE6216C Series
(SOT-25, SOT-89-5, USP-6C)
●XC6216D/XE6216D Series
(SOT-89, SOT-223, TO-252)
4/29
XC6216/XE6216
Series
■ABSOLUTE MAXIMUM RATINGS
●XC6216B Series
PARAMETER
Input Voltage
SYMBOL
VIN
RATINGS
VSS-0.3~30
300 (*1)
UNIT
V
Output Current
Output Voltage
CE Input Voltage
IOUT
mA
V
VOUT
VCE
VSS-0.3~VIN+0.3
VSS-0.3~30
250
V
SOT-25
mW
Power Dissipation
Pd
SOT-89-5
USP-6C
500
(TJ=25℃)
100
Operating Temperature Range
Storage Temperature Range
Topr
Tstg
-40~+85
-55~+125
℃
℃
*1: IOUT≦Pd / (VIN-VOUT)
●XC6216C Series
PARAMETER
Input Voltage
Output Current
Output Voltage
CE Input Voltage
FB Voltage
SYMBOL
VIN
RATINGS
VSS-0.3~30
300 (*1)
UNIT
V
IOUT
mA
V
VOUT
VCE
VSS-0.3~VIN+0.3
VSS-0.3 ~ 30
VSS-0.3 ~ 30
250
V
VOFB
V
SOT-25
mW
Power Dissipation
Pd
SOT-89-5
USP-6C
500
(TJ=25℃)
100
Operating Temperature Range
Storage Temperature Range
Topr
Tstg
-40~+85
℃
℃
-55~+125
*1: IOUT≦Pd / (VIN-VOUT)
●XC6216D Series
PARAMETER
Input Voltage
Output Current
Output Voltage
SOT-89
SYMBOL
VIN
RATINGS
VSS-0.3~30
300 (*1)
UNIT
V
IOUT
mA
V
VOUT
VSS-0.3~VIN+0.3
500
mW
Power Dissipation
Pd
SOT-223
TO-252
300
(TJ=25℃)
500
Operating Temperature Range
Storage Temperature Range
Topr
Tstg
-40~+85
-55~+125
℃
℃
*1: IOUT≦Pd / (VIN-VOUT)
*2: Only SOT-89 package is available for the XE series.
5/29
XC6216/XE6216 Series
■ELECTRICAL CHARACTERISTICS
●XC6216B Series
Ta = 25℃
PARAMETER
Output Voltage
SYMBOL
CONDITIONS
MIN.
TYP.
E-0
-
MAX.
UNIT CIRCUIT
VOUT(E)
IOUT=20mA, VCE=VIN
VIN=VOUT(T)+3.0V, VCE=VIN
(VOUT(T)≧3.0V)
V
①
①
mA
150
100
-
-
Maximum Output Current
IOUTMAX
VIN=VOUT(T)+3.0V, VCE=VIN
(VOUT(T)<3.0V)
mA
mV
①
①
-
VIN=VOUT(T)+2.0V,
1mA≦IOUT≦50mA, VCE=VIN,
(2.0V≦VOUT(T)≦7.0V)
VIN=VOUT(T)+2.0V,
-
-
50
90
Load Regulation
△VOUT
1mA≦IOUT≦50mA, VCE=VIN,
(7.1V≦VOUT(T)≦12.0V)
IOUT=20mA, VCE=VIN
IOUT=100mA,
mV
mV
①
①
110
E-1
140
Dropout Voltage 1
Dropout Voltage 2
Vdif1
Vdif2
VIN = VOUT(T)+3.0V, VCE=VIN
(VOUT(T)<3.0V)
mV
①
E-2
IOUT=100mA, VCE=VIN
(VOUT(T)<3.0V)
Supply Current
ISS
VCE=VIN
μA
μA
②
②
1
-
5
9
Stand-by Current
Istby
VCE=VSS
0.01
0.10
△VOUT /
VOUT(T)+2.0V≦VIN≦28.0V
IOUT=5mA, VCE=VIN
VOUT(T)+2.0V≦VIN≦28.0V
IOUT=13mA, VCE=VIN
Line Regulation 1
Line Regulation 2
%/V
①
0.01
0.05
0.10
△VIN・VOUT(T)
△VOUT /
%/V
V
①
-
0.03
2.0
-
0.15
-
0.30
28.0
-
△VIN・VOUT(T)
Input Voltage
Output Voltage
VIN
△VOUT /
IOUT=20mA, VCE=VIN
-40℃≦Topr≦85℃
VIN=[VOUT(T)+2.0]V+0.5Vp-pAC
IOUT=20mA, f=1kHz, VCE=VIN
VIN=VOUT(T)+2.0V, VCE=VIN
VIN=28.0V
ppm/℃
①
±100
△Topr・VOUT(T)
Temperature Characteristics
Ripple Rejection Rate
PSRR
dB
③
-
30
-
Short Current
Ishort
VCEH
VCEL
ICEH
mA
V
①
①
①
①
①
-
30
-
-
CE ”H” Level Voltage
CE ”L” Level Voltage
CE ”H” Level Current
CE ”L” Level Current
1.1
0
28.0
0.35
0.1
VIN=28.0V
V
-
VIN=VCE=28.0V
μA
μA
-0.1
-0.1
-
ICEL
VIN=28.0V, VCE=VSS
-
0.1
Thermal Shutdown
Detect Temperature
Thermal Shutdown
Release Temperature
Hysteresis Range
TTSD
Junction Temperature
Junction Temperature
-
150
-
℃
①
TTSR
-
-
125
25
-
-
℃
℃
①
TTSD-TTSR
-
NOTE:
*1: VOUT(T): Specified output voltage
*2: VOUT(E): Effective output voltage
(i.e. the output voltage when “VOUT(T)+2.0V” is provided at the VIN pin while maintaining a certain IOUT value.)
{Note 4}
*3: Vdif={VIN1{Note 5} - VOUT1
}
*4: VOUT1: A voltage equal to 98% of the output voltage whenever an amply stabilized IOUT{VOUT(T)+2.0V} is input.
*5: VIN1: The input voltage when VOUT1 appears as input voltage is gradually decreased.
*6: Unless otherwise stated, VIN=VOUT(T)+2.0V.
6/29
XC6216/XE6216
Series
■ELECTRICAL CHARACTERISTICS (Continued)
●XC6216C Series
Ta = 25℃
PARAMETER
SYMBOL
CONDITIONS
MIN.
TYP.
MAX.
UNIT CIRCUIT
IOUT=20mA, VCE=VIN,
VOFB=VOUT
Output Voltage
Divided Resistor
VOUT(E)
RFB
1.96
1.30
100
2.00
2.09
-
2.04
4.40
-
V
①
④
①
VIN=VOUT=5.0V, VCE=VSS
VOFB=VOUT
MΩ
mA
VIN=5.0V, VCE=VIN ,
VOFB=VOUT
Maximum Output Current
IOUTMAX
VIN=4.0V
Load Regulation
△VOUT
1mA≦IOUT≦50mA,
VCE=VIN, VOFB=VOUT
IOUT=20mA, VCE=VIN,
VOFB=VOUT
mV
①
-
50
90
Dropout Voltage1
Dropout Voltage2
Vdif1
Vdif2
mV
mV
①
①
-
-
450
600
IOUT=100mA, VIN=5.0V,
VCE=VIN, VOFB=VOUT
VCE=VIN, VOFB=VOUT
VCE=VSS, VOFB=VOUT
4.0V≦VIN≦28.0V,
IOUT=5mA, VCE=VIN,
VOFB=VOUT
1900
2600-
Supply Current
ISS
μA
μA
②
②
1
-
5
9
Stand-by Current
Istby
0.01
0.10
△VOUT /
Line Regulation1
Line Regulation2
%/V
%/V
①
①
-
-
0.05
0.15
0.10
0.30
△VIN・VOUT(T)
4.0V≦VIN≦28.0V,
IOUT=13mA, VCE=VIN,
VOFB=VOUT
△VOUT /
△VIN・VOUT(T)
Input Voltage
VIN
V
-
2.0
-
-
28.0
-
Output Voltage
△VOUT /
IOUT=20mA, VCE=VIN,
-40℃≦Topr≦85℃
VIN=4.0V+0.5Vp-pAC,
IOUT=20mA, f=1kHz, VCE=VIN
VOFB=VOUT
ppm/℃
①
±100
Temperature Characteristics△Topr・VOUT(T)
Ripple Rejection Rate
PSRR
dB
③
-
-
30
30
-
-
VIN=4.0V, VCE=VIN,
VOFB=VOUT
Short Current
Ishort
mA
①
CE ”H” Level Voltage
CE ”L” Level Voltage
CE ”H” Level Current
VCEH
VCEL
ICEH
VIN=28.0V, VOFB=VOUT
VIN=28.0V, VOFB=VOUT
VIN=VCE=28.0V, VOFB=VOUT
VIN=28.0V, VCE=VSS
VOFB=VOUT
V
V
①
①
①
1.1
0
-
-
-
28.0
0.5
μA
-0.1
0.1
CE ”L” Level Current
ICEL
μA
①
-0.1
-
-
0.1
-
Thermal Shutdown
Detect Temperature
Thermal Shutdown
Release Temperature
Hysteresis Range
①
TTSD
Junction Temperature
Junction Temperature
150
℃
①
TTSR
-
-
125
25
-
-
℃
℃
TTSD-TTSR
-
NOTE:
*1: VOUT(T): Specified output voltage
*2: VOUT(E): Effective output voltage
(i.e. the output voltage when “VOUT(T)+2.0V” is provided at the VIN pin while maintaining a certain IOUT value.)
{Note 4}
*3: Vdif={VIN1{Note 5} - VOUT1
}
*4: VOUT1: A voltage equal to 98% of the output voltage whenever an amply stabilized IOUT{VOUT(T)+2.0V} is input.
*5: VIN1: The input voltage when VOUT1 appears as input voltage is gradually decreased.
*6: Unless otherwise stated, VIN=VOUT(T)+2.0V.
7/29
XC6216/XE6216 Series
■ELECTRICAL CHARACTERISTICS (Continued)
●XC6216D Series
Ta = 25℃
PARAMETER
Output Voltage
SYMBOL
CONDITIONS
IOUT=20mA
MIN.
TYP.
MAX.
UNIT CIRCUIT
VOUT(E)
E-0
-
V
①
①
VIN=VOUT(T)+3.0V,
mA
150
100
-
-
(VOUT(T)≧3.0V)
Maximum Output Current
IOUTMAX
VIN=VOUT(T)+3.0V,
mA
①
-
(VOUT(T)<3.0V)
VIN=VOUT(T)+2.0V
Load Regulation
Dropout Voltage1
△VOUT
mV
mV
①
①
-
50
90
1mA≦IOUT≦100mA
Vdif1
IOUT=20mA
IOUT=100mA, VIN=VOUT(T)+3.0V
(VOUT(T)<3.0V)
E-1
Dropout Voltage2
Vdif2
mV
①
E-2
IOUT=100mA,
(VOUT(T)≧3.0V)
Supply Current
ISS
△VOUT /
μA
②
①
1
-
5
9
VOUT(T)+2.0V≦VIN≦28.0V
IOUT=5mA
Line Regulation1
%/V
0.05
0.10
△VIN・VOUT(T)
△VOUT /
VOUT(T)+2.0V≦VIN≦28.0V
IOUT=13mA
Line Regulation2
%/V
V
①
-
-
2.0
-
0.15
-
0.30
28.0
-
△VIN・VOUT(T)
VIN
Input Voltage
Output Voltage
△VOUT /
IOUT=20mA, VCE=VIN
-40℃≦Topr≦85℃
ppm/℃
①
±100
Temperature Characteristics△Topr・VOUT(T)
VIN=[VOUT(T)+2.0]V+0.5Vp-pAC
IOUT=20mA, f=1kHz
Ripple Rejection Rate
Short Current
PSRR
Ishort
dB
③
①
-
-
30
30
-
-
VIN=VOUT(T)+2.0V
mA
Thermal Shutdown
Detect Temperature
Thermal Shutdown
Release Temperature
Hysteresis Range
TTSD
Junction Temperature
Junction Temperature
-
150
-
℃
-
TTSR
-
-
125
25
-
-
℃
℃
-
-
TTSD-TTSR
NOTE:
*1: VOUT(T): Specified output voltage
*2: VOUT(E): Effective output voltage
(i.e. the output voltage when “VOUT(T)+2.0V” is provided at the VIN pin while maintaining a certain IOUT value.)
{Note 4}
*3: Vdif={VIN1{Note 5} - VOUT1
}
*4: VOUT1: A voltage equal to 98% of the output voltage whenever an amply stabilized IOUT{VOUT(T)+2.0V} is input.
*5: VIN1: The input voltage when VOUT1 appears as input voltage is gradually decreased.
*6: Unless otherwise stated, VIN=VOUT(T)+2.0V.
8/29
XC6216/XE6216
Series
■ELECTRICAL CHARACTERISTICS (Continued)
●Voltage Chart
PARAMETER
E-0
E-1
E-2
OUTPUT VOLTAGE
(V)
OUTPUT VOLTAGE
(V)
DROPOUT VOLTAGE 1
(mV)
DROPOUT VOLTAGE 2
(mV)
SETTING
VOLTAGE
VOUT(T)
(V)
2% ACCURACY
1% ACCURACY
IOUT=20mA
IOUT=100mA
VOUT
VOUT
Vdif1
Vdif2
MIN.
1.960
2.058
2.156
2.254
2.352
2.450
2.548
2.646
2.744
2.842
2.940
3.038
3.136
3.234
3.332
3.430
3.528
3.626
3.724
3.822
3.920
4.018
4.116
4.214
4.312
4.410
4.508
4.606
4.704
4.802
MAX.
2.040
2.142
2.244
2.346
2.448
2.550
2.652
2.754
2.856
2.958
3.060
3.162
3.264
3.366
3.468
3.570
3.672
3.774
3.876
3.978
4.080
4.182
4.284
4.386
4.488
4.590
4.692
4.794
4.896
4.998
MIN.
1.980
2.079
2.178
2.277
2.376
2.475
2.574
2.673
2.772
2.871
2.970
3.069
3.168
3.267
3.366
3.465
3.564
3.663
3.762
3.861
3.960
4.059
4.158
4.257
4.356
4.455
4.554
4.653
4.752
4.851
MAX.
2.020
2.121
2.222
2.323
2.424
2.525
2.626
2.727
2.828
2.929
3.030
3.131
3.232
3.333
3.434
3.535
3.636
3.737
3.838
3.939
4.040
4.141
4.242
4.343
4.444
4.545
4.646
4.747
4.848
4.949
TYP.
450
450
390
390
390
310
310
310
310
310
260
260
260
260
260
260
260
260
260
260
220
220
220
220
220
220
220
220
220
220
MAX.
600
600
520
520
520
450
450
450
450
450
360
360
360
360
360
360
360
360
360
360
320
320
320
320
320
320
320
320
320
320
TYP.
1900
1900
1700
1700
1700
1500
1500
1500
1500
1500
1300
1300
1300
1300
1300
1300
1300
1300
1300
1300
1100
1100
1100
1100
1100
1100
1100
1100
1100
1100
MAX.
2600
2600
2200
2200
2200
1900
1900
1900
1900
1900
1700
1700
1700
1700
1700
1700
1700
1700
1700
1700
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
2.0
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
3.0
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
4.0
4.1
4.2
4.3
4.4
4.5
4.6
4.7
4.8
4.9
9/29
XC6216/XE6216 Series
■ELECTRICAL CHARACTERISTICS (Continued)
●Voltage Chart (Continued)
PARAMETER
E-0
E-1
E-2
OUTPUT VOLTAGE
(V)
OUTPUT VOLTAGE
(V)
DROPOUT VOLTAGE 1
(mV)
DROPOUT VOLTAGE 2
(mV)
SETTING
VOLTAGE
VOUT(T)
(V)
2% ACCURACY
1% ACCURACY
IOUT=20mA
IOUT=100mA
VOUT
VOUT
Vdif1
Vdif2
MIN.
4.900
4.998
5.096
5.194
5.292
5.390
5.488
5.586
5.684
5.782
5.880
5.978
6.076
6.174
6.272
6.370
6.468
6.566
6.664
6.762
6.860
6.958
7.056
7.154
7.252
7.350
7.448
7.546
7.644
7.742
7.840
MAX.
5.100
5.202
5.304
5.406
5.508
5.610
5.712
5.814
5.916
6.018
6.120
6.222
6.324
6.426
6.528
6.630
6.732
6.834
6.936
7.038
7.140
7.242
7.344
7.446
7.548
7.650
7.752
7.854
7.956
8.058
8.160
MIN.
4.950
5.049
5.148
5.247
5.346
5.445
5.544
5.643
5.742
5.841
5.940
6.039
6.138
6.237
6.336
6.435
6.534
6.633
6.732
6.831
6.930
7.029
7.128
7.227
7.326
7.425
7.524
7.623
7.722
7.821
7.920
MAX.
5.050
5.151
5.252
5.353
5.454
5.555
5.656
5.757
5.916
5.959
6.060
6.161
6.262
6.363
6.464
6.565
6.666
6.767
6.868
6.969
7.070
7.171
7.272
7.373
7.474
7.575
7.676
7.777
7.878
7.979
8.080
TYP.
190
190
190
190
190
190
190
190
190
190
190
190
190
190
190
170
170
170
170
170
170
170
170
170
170
170
170
170
170
170
170
MAX.
280
280
280
280
280
280
280
280
280
280
280
280
280
280
280
230
230
230
230
230
230
230
230
230
230
230
230
230
230
230
230
TYP.
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
800
MAX.
1300
1300
1300
1300
1300
1300
1300
1300
1300
1300
1300
1300
1300
1300
1300
1150
1150
1150
1150
1150
1150
1150
1150
1150
1150
1150
1150
1150
1150
1150
1150
5.0
5.1
5.2
5.3
5.4
5.5
5.6
5.7
5.8
5.9
6.0
6.1
6.2
6.3
6.4
6.5
6.6
800
6.7
800
6.8
800
6.9
800
7.0
800
7.1
800
7.2
800
7.3
800
7.4
800
7.5
800
7.6
800
7.7
800
7.8
800
7.9
800
8.0
800
10/29
XC6216/XE6216
Series
■ELECTRICAL CHARACTERISTICS (Continued)
●Voltage Chart (Continued)
PARAMETER
E-0
E-1
E-2
OUTPUT VOLTAGE
(V)
OUTPUT VOLTAGE
(V)
DROPOUT VOLTAGE 1
(mV)
DROPOUT VOLTAGE 2
(mV)
SETTING
VOLTAGE
VOUT(T)
(V)
2% ACCURACY
1% ACCURACY
IOUT=20mA
IOUT=100mA
VOUT
VOUT
Vdif1
Vdif2
MIN.
7.938
8.036
8.134
8.232
8.330
8.428
8.526
8.624
8.722
8.820
8.918
9.016
9.114
MAX.
8.262
MIN.
8.019
8.118
MAX.
8.181
TYP.
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
MAX.
190
190
190
190
190
190
190
190
190
190
190
190
190
190
190
190
190
190
190
190
160
160
160
160
160
160
160
160
160
160
160
160
160
160
160
160
160
160
160
160
TYP.
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
650
650
650
650
650
650
650
650
650
650
650
650
650
650
650
650
650
650
650
650
MAX.
950
950
950
950
950
950
950
950
950
950
950
950
950
950
950
950
950
950
950
950
850
850
850
850
850
850
850
850
850
850
850
850
850
850
850
850
850
850
850
850
8.1
8.2
8.364
8.282
8.3
8.466
8.217
8.316
8.415
8.514
8.613
8.712
8.811
8.383
8.4
8.568
8.484
8.5
8.670
8.585
8.6
8.772
8.686
8.7
8.874
8.787
8.8
8.976
8.888
8.9
9.078
8.989
9.0
9.180
8.910
9.009
9.108
9.207
9.306
9.405
9.504
9.603
9.702
9.801
9.900
9.999
10.098
10.197
10.296
10.395
10.494
10.593
10.692
10.791
10.890
10.989
11.088
11.187
11.286
11.385
11.484
11.583
11.682
11.781
11.880
9.090
9.1
9.282
9.191
9.2
9.384
9.292
9.3
9.486
9.393
9.4
9.212
9.310
9.408
9.506
9.604
9.702
9.800
9.898
9.996
10.094
10.192
10.290
10.388
10.486
10.584
10.682
10.780
10.878
10.976
11.074
11.172
11.270
11.368
11.466
11.564
11.662
11.760
9.588
9.494
9.5
9.690
9.595
9.6
9.792
9.696
9.7
9.894
9.797
9.8
9.996
9.898
9.9
10.098
10.200
10.302
10.404
10.506
10.608
10.710
10.812
10.914
11.016
11.118
11.220
11.322
11.424
11.526
11.628
11.730
11.832
11.934
12.036
12.138
12.240
9.999
10.0
10.1
10.2
10.3
10.4
10.5
10.6
10.7
10.8
10.9
11.0
11.1
11.2
11.3
11.4
11.5
11.6
11.7
11.8
11.9
12.0
10.100
10.201
10.302
10.403
10.504
10.605
10.706
10.807
10.908
11.009
11.110
11.211
11.312
11.413
11.514
11.615
11.716
11.817
11.918
12.019
12.120
11/29
XC6216/XE6216 Series
■OPERATIONAL EXPLANATION
<Output Voltage Control>
The voltage divided by resistors R11 & R12 is compared with the internal reference voltage by the error amplifier. The
P-channel MOSFET, which is connected to the VOUT pin, is then driven by the subsequent output signal. The output
voltage at the VOUT pin is controlled and stabilized by a system of negative feedback. The current limit circuit and short
protect circuit operate in relation to the level of output current and heat dissipation. Further, the IC’s internal circuitry
can be shutdown via the CE pin’s signal.
<Short-Circuit Protection>
The XC6216/XE6216 series includes a current fold-back circuit as a short circuit protection. When the load current reaches
the current limit level, the current fold-back circuit operates and output voltage drops. The output voltage drops further and
output current decreases. When the output pin is shorted, a current of about 30mA flows.
<CE Pin>
The IC’s internal circuitry can be shutdown via the signal from the CE pin with the XC6216/XE6216 series. In shutdown
mode, output at the VOUT pin will be pulled down by R11 and R12 to the VSS level. Note that as the XC6216/XE6216 series
is ‘High Active/No pull down’, operations will become unstable with the CE pin open. We suggest that you use this IC with
either a VIN voltage or a VSS voltage input at the CE pin. If this IC is used with the correct specifications for the CE pin, the
operational logic is fixed and the IC will operate normally. However, supply current may increase as a result of through
current in the IC’s internal circuitry if a medium voltage is applied.
<Thermal Shutdown>
When the junction temperature of the built-in driver transistor reaches the temperature limit level (150℃ TYP.), the thermal
shutdown circuit operates and the driver transistor will be set to OFF. The IC resumes its operation when the thermal
shutdown function is released and the IC’s operation is automatically restored because the junction temperature drops to the
level of the thermal shutdown release voltage.
<Minimum Operating Voltage>
For the stable operation of the IC, over 2.0V of input voltage is necessary. The output voltage may not be generated
normally if the input voltage is less than 2.0V.
12/29
XC6216/XE6216
Series
■NOTES ON USE
1. Please use this IC within the stated absolute maximum ratings. The IC is liable to malfunction should the ratings be
exceeded.
2. Where wiring impedance is high, operations may become unstable due to the noise and/or phase lag depending on output
current. Please strengthen VIN and VSS wiring in particular.
3. Phase compensation inside the IC is performed in the XC6216/XE6216 series. Therefore, an abnormal oscillation does not
occur even if there is no output capacitor CL. An input capacitor CIN around 0.1uF~1.0uF between the VIN pin and the
VSS pin is required for input stability. Also, the output voltage fluctuation such as under shoot or over shoot, which occurs
because of the load change can be controlled by placing the output capacitor CL around 0.1uF~1.0uF between the VOUT
pin and VSS pin. The input capacitor (CIN) and the output capacitor (CL) should be placed to the IC as close as possible
with a shorter wiring.
4. Notes on Setting Output Voltage Externally (C type) Topr=25℃
The output voltage can be set externally by the following equation:
VOUT=2.0V x (Rxx + Ryy) / Ryy
……………………………………………………………………… (1)
Although the output voltage can be set freely by the above equation, resistance values can be calculated by the
following equations in case considering output voltage accuracy.
Ixx = IFB + Iyy
Iyy = 2.0V / Ryy
……………………………………………………………………… (2)
……………………………………………………………………… (3)
If the equation (3) is assigned to the equation (2), the equation becomes as below:
Ixx =IFB + 2.0V / Ryy
……………………………………………………………………… (4)
For this, the following equation can be used for setting output voltage externally:
VOUT=2.0V + Rxx・Ixx
……………………………………………………………………… (5)
And the equation (4) will be;
VOUT=2.0V + Rxx・(IFB + 2.0V / Ryy)
………………………………………………………………………
=2.0V x (1 + Rxx / Ryy) + Rxx・IFB ……………………………………………………………………… (6)
The second term of the equation (6), Rxx・IFB, is the cause of the output accuracy error.
The IFB can be calculated by the following equation:
IFB=2.0V / RFB
……………………………………………………………………… (7)
The cause of the output accuracy error, Rxx・IFB can be calculated by the equation below;
Rxx・IFB = Rxx・2.0V / Ryy
= 2.0V x Rxx・RFB
……………………………………………………………………… (8)
Accordingly, if Rxx is smaller than RFB, the output voltage error becomes minute.
●Setting Resistance-Dependant of XC6216 Series’ Output Voltage
13/29
XC6216/XE6216 Series
■TEST CIRCUITS
Circuit ①
●XC6216B/XE6216B Series
●XC6216C/XE6216C Series
●XC6216D/XE6216D Series
Circuit ②
●XC6216B/XE6216B Series
●XC6216C/XE6216C Series
●XC6216D/XE6216D Series
Circuit ③
●XC6216B/XE6216B Series
●XC6216C/XE6216C Series
●XC6216D/XE6216D Series
Circuit ④
●XC6216C/XE6216C Series
14/29
XC6216/XE6216
Series
■TYPICAL PERFORMANCE CHARACTERISTICS
(1) Output Voltage vs. Output Current
XC6216B/C/D 202
XC6216B/C/D 202
L
Ta=25 , CIN=C =1.0 F (ceramic)
℃ μ
V
IN=VCE=5.0V, Ta=25 , CIN=CL
=1.0 F (ceramic)
℃ μ
2.5
2.0
1.5
1.0
0.5
0.0
2.5
2.0
1.5
1.0
0.5
0.0
VIN=3V
VIN=4V
VIN=5V
Ta=-40
℃
Ta=25
Ta=85
℃
℃
0
50
100
150
200
250
300
0
50
100
150
200
250
300
Output Current: IOUT (mA)
Output Currrent: IOUT (mA)
XC6216B/D 332
XC6216B/D 332
V
IN=VCE=6.3V, Ta=25 , CIN=C
℃
L
=1.0 F (ceramic)
L
Ta=25 , CIN=C =1.0 F (ceramic)
℃ μ
μ
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
VIN=4.3V
Ta=-40
℃
VIN=5.3V
VIN=6.3V
Ta=25
Ta=85
℃
℃
0
50
100
150
200
250
300
0
50
100
150
200
250
300
Output Current: IOUT (mA)
Output Current: IOUT (mA)
XC6216B/D 502
XC6216B/D 502
L
Ta=25 , CIN=C =1.0 F (ceramic)
℃ μ
V
IN=VCE=8.0V, Ta=25 , CIN=CL
=1.0 F (ceramic)
℃ μ
6.0
5.0
4.0
3.0
2.0
1.0
0.0
6.0
5.0
4.0
3.0
2.0
1.0
0.0
Ta=-40
℃
VIN=6V
VIN=7V
VIN=8V
Ta=25
℃
Ta=85
℃
0
50
100
150
200
250
300
0
50
100 200
150
250
300
Output Current: IOUT (mA)
OutputCurrent:I (mA)
OUT
15/29
XC6216/XE6216 Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(1) Output Voltage vs. Output Current (Continued)
XC6216B/D C02
XC6216B/D C02
L
Ta=25 , CIN=C =1.0 F (ceramic)
℃ μ
V
IN=VCE=15.0V, Ta=25 , CIN=CL
=1.0 F (ceramic)
℃ μ
14
12
10
8
14
12
10
8
6
6
4
VIN=13V
4
Ta=-40
℃
VIN=14V
VIN=15V
Ta=25
℃
2
2
Ta=85
℃
0
0
0
50
100
150
200
250
300
0
50
100
150
200
250
300
Output Current: IOUT (mA)
Output Current: IOUT (mA)
(2) Output Voltage vs. Input Voltage
XC6216B/C/D 202
XC6216B/C/D 202
Ta=25 , CIN=CL=1.0 F (ceramic)
℃ μ
Ta=25 , CIN=CL=1.0 F (ceramic)
℃ μ
2.1
2.0
1.9
1.8
1.7
1.6
1.5
2.1
2.0
1.9
1.8
1.7
1.6
1.5
IOUT=1mA
IOUT=10mA
IOUT=30mA
IOUT=1mA
IOUT=10mA
IOUT=30mA
1.5
2
2.5
3
3.5
4
4
8
12
16
20
24
28
InputVoltage:VIN(V)
Input Voltage: VIN (V)
XC6216B/D 332
XC6216B/D 332
Ta=25℃, CIN=CL=1.0uF(ceramic)
Ta=25℃, CIN=CL=1.0uF(ceramic)
3.4
3.3
3.2
3.1
3
3.4
3.3
3.2
3.1
3
IOUT=1mA
IOUT=10mA
IOUT=30mA
IOUT=1mA
IOUT=10mA
IOUT=30mA
2.9
2.8
2.9
2.8
4
8
12
16
20
24
28
2.8
3.3
3.8
4.3
4.8
5.3
Input Voltage : VIN (V)
Input Voltage : VIN (V)
16/29
XC6216/XE6216
Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(2) Output Voltage vs. Input Voltage (Continued)
XC6216B/D 502
XC6216B/D 502
Ta=25 , CIN=CL=1.0 F (ceramic)
℃ μ
L
Ta=25 , CIN=C =1.0 F (ceramic)
℃ μ
5.2
5.0
4.8
4.6
4.4
4.2
4.0
5.2
5.0
4.8
4.6
4.4
4.2
4.0
IOUT=1mA
IOUT=10mA
IOUT=30mA
IOUT=1mA
IOUT=10mA
IOUT=30mA
4
4.5
5
5.5
6
6.5
8
12
16
20
24
28
Input Voltage: VIN (V)
Input Voltage: VIN (V)
XC6216B/D C02
XC6216B/D C02
Ta=25 , CIN=CL=1.0 F (ceramic)
Ta=25 , CIN=CL=1.0 F (ceramic)
℃ μ
℃
μ
13.0
12.5
12.0
11.5
11.0
10.5
10.0
12.5
12.0
11.5
11.0
10.5
10.0
IOUT=1mA
IOUT=10mA
IOUT=30mA
IOUT=1mA
IOUT=10mA
IOUT=30mA
14
16
18
20
22
24
26
28
10
11
12
13
14
Input Voltage: VIN (V)
Input Voltage: VIN (V)
(3) Dropout Voltage vs. Output Current
XC6216B/C/D 202
XC6216B/D 332
C
IN=CL
=1.0uF (ceramic)
C
IN=CL
=1.0uF (ceramic)
3.0
2.5
2.0
1.5
1.0
0.5
0.0
3.0
2.5
2.0
1.5
1.0
0.5
0.0
Ta=-40
Ta=-40
℃
℃
Ta=25
Ta=25
℃
℃
Ta=85
Ta=85
℃
℃
0
25
50
75
100
125
150
0
25
50
75
100
125
150
Output Current: IOUT (V)
Output Current: I (V)
OUT
17/29
XC6216/XE6216 Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(3) Dropout Voltage vs. Output Current
XC6216B/D 502
XC6216B/D C02
C
IN=CL
=1.0uF (ceramic)
CIN=CL=1.0uF(ceramic)
3.0
2.5
2.0
1.5
1.0
0.5
0.0
3.0
2.5
2.0
1.5
1.0
0.5
0.0
Ta=-40
℃
Ta=-40
℃
Ta=25
℃
Ta=25
℃
Ta=85
℃
Ta=85
℃
0
25
50
75
100
125
150
0
25
50
75
100
125
150
Output Current: IOUT (V)
Output Current: IOUT (V)
(4) Supply Current vs. Input Voltage
XC6216B/C/D 202
XC6216B/C/D 202
10
9
8
7
6
5
4
3
2
1
0
V
IN=4.0V
10
9
8
7
6
5
4
3
2
1
0
Ta=-40
℃
Ta=25
℃
Ta=85
℃
-40
-20
0
20
40
60
80
100
0
4
8
12
16
20
24
28
Input Voltage: V (V)
IN
Ambient Temprature: Ta (
)
℃
XC6216B/D 332
XC6216B/D 332
V
IN=5.3V
10
9
8
7
6
5
4
3
2
1
0
10
9
8
7
6
5
4
3
2
1
0
Ta=-40
℃
Ta=25
℃
Ta=85
℃
-40
-20
0
20
40
60
80
100
0
4
8
12
16
20
24
28
Input Voltage: VIN (V)
Ambient Temprature: Ta (
)
℃
18/29
XC6216/XE6216
Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(4) Supply Current vs. Input Voltage (Continued)
XC6216B/D 502
XC6216B/D 502
VIN=7.0V
10
9
10
9
8
7
6
5
4
3
2
1
0
8
7
6
5
4
3
Ta=-40
℃
2
1
0
Ta=25
℃
Ta=85
℃
-40
-20
0
20
40
60
80
100
0
4
8
12
16
20
24
28
Input Voltage:VIN(V)
Ambient Temperature: Ta (
)
℃
XC6216B/D C02
XC6216B/D C02
VIN=14.0V
10
9
8
7
6
5
4
3
2
1
0
10
9
8
7
6
5
4
3
2
1
0
Ta=-40
℃
Ta=25
℃
Ta=85
℃
-40
-20
0
20
40
60
80
)
100
0
4
8
12
16
20
24
28
Input Voltage: VIN (V)
Ambient Temprature: Ta (
℃
(5) Output Voltage vs. Ambient Temperature
XC621B/C/D 202
XC6216B/D 332
CIN=CL=1.0 F (ceramic)
μ
C
IN=CL
=1.0 F (ceramic)
μ
2.20
2.15
2.10
2.05
2.00
1.95
1.90
1.85
1.80
3.50
3.45
3.40
3.35
3.30
3.25
3.20
3.15
3.10
IOUT=1mA
IOUT=10mA
IOUT=20mA
IOUT=1mA
IOUT=10mA
IOUT=20mA
-50
-25
0
25
50
75
100
-50
-25
0
25
50
75
℃)
100
Ambient Temperature: Ta (
Ambient Temperature: Ta (
)
℃
19/29
XC6216/XE6216 Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(5) Output Voltage vs. Ambient Temperature
XC6216B/D 502
XC6216B/D C02
C
IN=CL
=1.0 F (ceramic)
μ
C
IN=CL=1.0 F (ceramic)
μ
5.20
5.15
5.10
5.05
5.00
4.95
4.90
4.85
4.80
12.20
12.15
12.10
12.05
12.00
11.95
11.90
11.85
11.80
IOUT=1mA
IOUT=1mA
IOUT=10mA
IOUT=20mA
IOUT=10mA
IOUT=20mA
-50
-25
0
25
50
75
℃)
100
-50
-25
0
25
50
75
)
100
Ambient Temperature: Ta (
Ambient Temperature: Ta (
℃
(6) Line Transient Response
XC6216B/C/D 202
XC6216B/C/D 202
I
=1mA, tr=tf =5
s
μ
I
=30mA, tr=tf =5
s
OUT
OUT
μ
C =1 F (ceramic), Ta=25
C =1 F (ceramic), Ta=25
L
L
μ
℃
μ
℃
6.0
5.0
4.0
3.0
2.0
1.0
0.0
2.4
2.3
2.2
2.1
2.0
1.9
1.8
6.0
5.0
4.0
3.0
2.0
1.0
0.0
2.4
2.3
2.2
2.1
2.0
1.9
1.8
Input Voltage
Input Voltage
Output Voltage
Output Voltage
Time (1ms/div)
Time (1ms/div)
XC6216B/D 332
XC6216B/D 332
I
OUT=1mA, tr=tf =5
s
I
OUT=30mA, tr=tf =5
s
μ
μ
C
L
=1 F (ceramic), Ta=25
CL=1 F (ceramic), Ta=25
μ ℃
μ
℃
7.0
3.7
7.0
3.7
3.6
3.5
3.4
3.3
3.2
3.1
6.0
5.0
4.0
3.0
2.0
1.0
3.6
3.5
3.4
3.3
3.2
3.1
6.0
5.0
4.0
3.0
2.0
1.0
Input Voltage
Input Voltage
Output Voltage
Output Voltage
Time (1ms/div)
Time (1ms/div)
20/29
XC6216/XE6216
Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(6) Line Transient Response (Continued)
XC6216B/D 502
XC6216B/D 502
I
OUT=30mA, tr=tf=5
s
μ
I
OUT=1mA, tr=tf =5
s
μ
L
C =1 F (ceramic), Ta=25
μ ℃
L
C =1 F (ceramic), Ta=25
μ ℃
9.0
8.0
7.0
6.0
5.0
4.0
3.0
5.4
5.3
5.2
5.1
5.0
4.9
4.8
9.0
8.0
7.0
6.0
5.0
4.0
3.0
5.4
5.3
5.2
5.1
5.0
4.9
4.8
Input Voltage
Input Voltage
Output Voltage
Output Voltage
Time (1ms/div)
Time (1ms/div)
XC6216B/D C02
XC6216B/D C02
I
OUT=1mA, tr=tf=5
s
μ
I
OUT=30mA, tr=tf =5
s
μ
L
C =1 F (ceramic), Ta=25
μ ℃
L
C =1 F (ceramic), Ta=25
μ ℃
16.0
12.4
16.0
12.4
15.0
14.0
13.0
12.0
11.0
10.0
12.3
12.2
12.1
12.0
11.9
11.8
15.0
14.0
13.0
12.0
11.0
10.0
12.3
12.2
12.1
12.0
11.9
11.8
Input Voltage
Input Voltage
Output Voltage
Output Voltage
Time (1ms/div)
Time (1ms/div)
(7) Load Transient Response
XC6216B/C/D 202
XC6216B/D 332
VIN=4.0V, tr=tf=5us
VIN=5.3V, tr=tf=5us
CIN=CL=1.0uF(ceramic), Ta=25℃
CIN=CL=1.0uF(ceramic), Ta=25℃
5
4
3
2
1
0
150
120
90
60
30
0
5
4
150
120
90
60
30
0
Output Voltage
Output Voltage
3
2
1
0
Output Current
Time (1ms/div)
30
Output Current
Time (1ms/div)
30m
1m
1m
21/29
XC6216/XE6216 Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(7) Load Transient Response (Continued)
XC6216B/D 502
XC6216B/D C02
VIN=14.0V, tr=tf=5us
VIN=7.0V, tr=tf=5us
CIN=CL=1.0uF(ceramic), Ta=25℃
CIN=CL=1.0uF(ceramic), Ta=25℃
7
6
5
4
3
2
150
120
90
60
30
0
14
13
12
11
10
9
150
120
90
60
30
0
Output Voltage
Output Voltage
Output Current
30m
Output Current
Time (1ms/div)
30
1m
1m
Time (1ms/div)
(8) Input Rise Time
XC6216B/C/D 202
XC6216B/C/D 202
V
IN=4.0V, tr=5
s
μ
V
IN=4.0V, tr=5
s
μ
I
OUT=1mA, CL
=1 F (ceramic),Ta=25
μ ℃
I
OUT=30mA, CL
=1 F (ceramic),Ta=25
μ ℃
6
4
6
5
4
3
2
1
0
6
4
6
5
4
3
2
1
0
Input Voltage
Input Voltage
2
2
0
0
Output Voltage
Output Voltage
-2
-4
-6
-2
-4
-6
Time(1ms/div)
XC6216B/D 332
Time (1ms/div)
XC6216B/D 332
V
IN=4.0V, tr=5μs
V
IN=4.0V, tr=5
s
μ
I
OUT=1mA, C
L
=1μF (ceramic),Ta=25
IOUT=30mA, CL=1uF (ceramic),Ta=25
℃
℃
8
8
7
6
5
4
3
2
1
0
8
8
7
6
5
4
3
2
1
0
Input Voltage
Input Voltage
6
4
6
4
2
2
Output Voltage
0
0
Output Voltage
-2
-4
-6
-8
-2
-4
-6
-8
Time (1ms/div)
Time (1ms/div)
ꢀ
22/29
XC6216/XE6216
Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(8) Input Rise Time (Continued)
XC6216B/D 502
XC6216B/D 502
V
IN=4.0V, tr=5
s
μ
V
IN=4.0V, tr=5
s
μ
I
OUT=1mA, C
L
=1 F (ceramic),Ta=25
I
OUT=30mA, CL
=1 F (ceramic),Ta=25
μ ℃
μ
℃
8
6
8
7
6
5
4
3
2
1
0
8
6
8
7
6
5
4
3
2
1
0
Input Voltage
Input Voltage
4
4
2
2
Output Voltage
Output Voltage
0
0
-2
-4
-6
-8
-2
-4
-6
-8
ime (1ms/div)
T
Time (1ms/div)
XC6216B/D C02
XC6216B/D C02
V
IN=4.0V, tr=5
s
μ
V
IN=4.0V, tr=5
s
μ
I
OUT=30mA, CL
=1 F (ceramic),Ta=25
μ ℃
I
OUT=1mA, CL
=1 F (ceramic),Ta=25
μ ℃
15
18
15
12
9
15
18
15
12
9
Input Voltage
Input Voltage
10
5
10
5
Output Voltage
Output Voltage
0
0
-5
6
-5
6
-10
-15
3
-10
-15
3
0
0
Time (1ms/div)
Time (1ms/div)
(9) CE Rise Time
XC6216B/C/D 202
XC6216B/C/D 202
V
IN=4.0V, tr=5
s
μ
V
IN=4.0V, tr=5
s
μ
I
OUT=1mA, CL
=1 F (ceramic),Ta=25
μ ℃
6
4
6
5
4
3
2
1
0
I
OUT=30mA, CL
=1 F (ceramic),Ta=25
μ ℃
6
4
6
5
4
3
2
1
0
CEInput Voltage
CEInput Voltage
2
2
0
0
Output Voltage
Output Voltage
-2
-4
-6
-2
-4
-6
Time (1ms/div)
Time(1ms/div)
23/29
XC6216/XE6216 Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(9) CE Rise Time (Continued)
XC6216B/D 332
XC6216B/D 332
V
IN=5.3V, tr=5
s
μ
V
IN=5.3V, tr=5
s
μ
I
OUT=1mA, CL
=1 F (ceramic),Ta=25
μ ℃
I
OUT=30mA, CL
=1 F (ceramic),Ta=25
μ ℃
8
6
8
7
6
5
4
3
2
1
0
8
6
8
7
6
5
4
3
2
1
0
CE Input Voltage
CE Input Voltage
4
4
2
2
0
0
Output Voltage
-2
-4
-6
-8
-2
-4
-6
-8
Output Voltage
Time (1ms/div)
Time (1ms/div)
XC6216B/D 502
XC6216B/D 502
VIN=7.0V, tr=5
s
μ
VIN=7.0V, tr=5
s
μ
IOUT=30mA, CL=1 F (ceramic),Ta=25
μ
℃
IOUT=1mA, CL=1 F (ceramic),Ta=25
μ
℃
8
6
4
2
0
8
8
6
8
7
6
5
4
3
2
1
0
7
6
5
4
3
2
1
0
CEInput Voltage
CEInput Voltage
4
2
Output Voltage
0
Output Voltage
-2
-4
-6
-8
-2
-4
-6
-8
Time (1ms/div)
Time (1ms/div)
XC6216B/D C02
XC6216B/D C02
V
IN=14.0V, tr=5
s
μ
V
IN=14.0V, tr=5
s
μ
I
OUT=1mA, CL
=1 F (ceramic),Ta=25
μ ℃
I
OUT=30mA, CL
=1 F (ceramic),Ta=25
μ ℃
15
18
15
12
9
15
10
5
18
15
12
9
CEInput Voltage
CEInput Voltage
10
5
0
Output Voltage
0
Output Voltage
-5
6
-5
6
-10
-15
3
-10
-15
3
0
0
Time (1ms/div)
Time (1ms/div)
24/29
XC6216/XE6216
Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(10) Ripple Rejection Rate
XC6216B/C/D 202
XC6216B/C/D 202
V
IN=4.0Vdc+0.5Vp-p, IOUT=1mA
V
IN=4.0Vdc+0.5Vp-p, IOUT=30mA
=1 F (ceramic),Ta=25
℃
C
L
=1 F (ceramic),Ta=25
C
L
μ
℃
μ
90
80
70
60
50
40
30
20
10
0
90
80
70
60
50
40
30
20
10
0
0.01
0.1
1
10
100
0.01
0.1
1
10
100
RippleFrequency:f(kHz)
Ripple Frequency: f (kHz)
XC6216B/D 332
XC6216B/D 332
V
IN
=4.0Vdc+0.5Vp-p, I
=30mA
OUT
V
IN
=5.3Vdc+0.5Vp-p, I
=1mA
OUT
C =1 F (ceramic),Ta=25
L
μ
℃
C =1 F (ceramic),Ta=25
L
μ
℃
90
90
80
70
60
50
40
30
20
10
0
80
70
60
50
40
30
20
10
0
0.01
0.1
1
10
100
0.01
0.1
1
10
100
Ripple Frequency: f (kHz)
Ripple Frequency: f (kHz)
XC6216B/D 502
XC6216B/D 502
V
IN=7.0Vdc+0.5Vp-p, IOUT=30mA
V
IN=7.0Vdc+0.5Vp-p, IOUT=1mA
C
L
=1 F (ceramic),Ta=25
μ
℃
C
L
=1 F (ceramic),Ta=25
μ
℃
90
80
70
60
50
40
30
20
10
0
90
80
70
60
50
40
30
20
10
0
0.01
0.1
1
10
100
0.01
0.1
1
10
100
Ripple Frequency: f (kHz)
Ripple Frequency: f (kHz)
25/29
XC6216/XE6216 Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(10) Ripple Rejection Time (Continued)
XC6216B/D C02
XC6216B/D C02
V
IN=VCE=14.0Vdc+0.5Vp-p, IOUT=30mA
V
IN=VCE=14.0Vdc+0.5Vp-p, IOUT=1mA
C
L
=1 F (ceramic),Topr=25
μ
℃
C
L
=1 F (ceramic),Topr=25
μ
℃
90
80
70
60
50
40
30
20
10
0
90
80
70
60
50
40
30
20
10
0
0.01
0.1
1
10
100
0.01
0.1
1
10
100
Ripple Frequency: f (kHz)
Ripple Frequency: f (kHz)
26/29
XC6216/XE6216
Series
■PACKAGING INFORMATION
●SOT-25
●SOT-89-5
4.5±0.1
2.9±0.2
+0.15
-0.2
1.6
+0.1
0.4 -0.05
0.42±0.06
0.42±0.06
+0.03
-0.02
0.42±0.06
0.4
5
1
4
2
4
5
0.05±0.05
Φ1.0
2
3
+0.1
(0.95)
0.15
-0.05
1.9±0.2
1
2
3
0.4 +-0.032
0.42±0.06
0.47±0.06
0.42±0.06
8
8
°
°
1.5±0.1
1.5±0.1
●USP-6C Recommended Pattern Layout
●USP-6C
●USP-6C Recommended Metal Mask Design
27/29
XC6216/XE6216 Series
■PACKAGING INFORMATION (Continued)
●SOT-223
●SOT-89
.
●TO-252
6. 55±0. 2
5. 3 ±0. 2
0. 5 ±0. 1
.
0. 75±0. 15
0. 75±0. 15
0. 75±0. 15
0. 5 ±0. 1
.
(2. 28)
(2. 28)
28/29
XC6216/XE6216
Series
1. The products and product specifications contained herein are subject to change without
notice to improve performance characteristics. Consult us, or our representatives
before use, to confirm that the information in this catalog is up to date.
2. We assume no responsibility for any infringement of patents, patent rights, or other
rights arising from the use of any information and circuitry in this catalog.
3. Please ensure suitable shipping controls (including fail-safe designs and aging
protection) are in force for equipment employing products listed in this catalog.
4. The products in this catalog are not developed, designed, or approved for use with such
equipment whose failure of malfunction can be reasonably expected to directly
endanger the life of, or cause significant injury to, the user.
(e.g. Atomic energy; aerospace; transport; combustion and associated safety
equipment thereof.)
5. Please use the products listed in this catalog within the specified ranges.
Should you wish to use the products under conditions exceeding the specifications,
please consult us or our representatives.
6. We assume no responsibility for damage or loss due to abnormal use.
7. All rights reserved. No part of this catalog may be copied or reproduced without the
prior permission of Torex Semiconductor Ltd.
29/29
相关型号:
©2020 ICPDF网 联系我们和版权申明