2SC2873-O(TE12L) [TOSHIBA]

TRANSISTOR,BJT,NPN,50V V(BR)CEO,2A I(C),SOT-89;
2SC2873-O(TE12L)
型号: 2SC2873-O(TE12L)
厂家: TOSHIBA    TOSHIBA
描述:

TRANSISTOR,BJT,NPN,50V V(BR)CEO,2A I(C),SOT-89

文件: 总5页 (文件大小:174K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
2SC2873  
TOSHIBA Transistor Silicon NPN Epitaxial Type (PCT Process)  
2SC2873  
Power Amplifier Applications  
Power Switching Applications  
Unit: mm  
Low saturation voltage: V  
= 0.5 V (max) (I = 1 A)  
C
CE (sat)  
High-speed switching time: t  
Small flat package  
= 1.0 μs (typ.)  
stg  
P
C
= 1.0 to 2.0 W (mounted on a ceramic substrate)  
Complementary to 2SA1213  
Absolute Maximum Ratings (Ta = 25°C)  
Characteristics  
Collector-base voltage  
Symbol  
Rating  
Unit  
V
CBO  
V
CEO  
V
EBO  
50  
50  
5
V
V
V
A
A
Collector-emitter voltage  
Emitter-base voltage  
Collector current  
I
2
C
Base current  
I
0.4  
500  
B
JEDEC  
JEITA  
P
P
C
C
Collector power dissipation  
mW  
SC-62  
2-5K1A  
1000  
(Note 1)  
TOSHIBA  
Junction temperature  
T
150  
°C  
°C  
j
Weight: 0.05 g (typ.)  
Storage temperature range  
T
stg  
55 to 150  
Note 1: Mounted on a ceramic substrate (250 mm2 × 0.8 t)  
Note 2: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the  
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly  
even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute  
maximum ratings.  
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook  
(“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test  
report and estimated failure rate, etc).  
1
2012-10-16  
2SC2873  
Electrical Characteristics (Ta = 25°C)  
Characteristics  
Symbol  
Test Condition  
= 50 V, I = 0  
Min  
Typ.  
Max  
Unit  
Collector cut-off current  
I
V
V
50  
0.1  
0.1  
μA  
μA  
V
CBO  
CB  
EB  
E
Emitter cut-off current  
I
= 5 V, I = 0  
C
EBO  
(BR) CEO  
Collector-emitter breakdown voltage  
V
I = 10 mA, I = 0  
C B  
h
FE (1)  
V
V
= 2 V, I = 0.5 A  
70  
240  
CE  
C
DC current gain  
(Note 3)  
h
= 2 V, I = 2.0 A  
20  
0.5  
1.2  
FE (2)  
CE  
C
Collector-emitter saturation voltage  
Base-emitter saturation voltage  
Transition frequency  
V
I
I
= 1 A, I = 0.05 A  
V
V
CE (sat)  
BE (sat)  
C
C
B
V
= 1 A, I = 0.05 A  
B
f
V
V
= 2 V, I = 0.5 A  
120  
30  
MHz  
pF  
T
CE  
CB  
C
Collector output capacitance  
C
= 10 V, I = 0, f = 1 MHz  
ob  
E
Turn-on time  
t
0.1  
1.0  
0.1  
on  
OUTPUT  
I
I
B1  
20 μs INPUT  
I
B1  
B2  
Storage time  
Fall time  
t
stg  
Switching time  
μs  
I
B2  
I
= I = 0.05 A,  
B1  
B2  
DUTY CYCLE 1%  
t
f
Note 3:  
h
classification O: 70 to 140, Y: 120 to 240  
FE (1)  
Marking  
Part No. (or abbreviation code)  
Characteristics indicator  
M
Note.4  
Lot No.  
Note 4 : A line beside a Lot No. identifies the indication of product Labels.  
Without a line: [[Pb]]/INCLUDES > MCV  
With a line : [[G]]/RoHS COMPATIBLE or [[G]]/RoHS [[Pb]]  
Please contact your TOSHIBA sales representative for details as to environmental matters  
such as the RoHS compatibility of Product.  
The RoHS is the Directive 2002/95/EC of the European Parliament and of the Council of 27  
January 2003 on the restriction of the use of certain hazardous substances in electrical and  
electronic equipment.  
2
2012-10-16  
2SC2873  
V
– I  
V
– I  
CE  
C
CE  
C
1.6  
1.2  
0.8  
0.4  
0
1.6  
1.2  
0.8  
0.4  
0
Common emitter  
Common emitter  
Ta = 25°C  
Ta = 100°C  
I
= 3 mA  
5
10  
20  
I
= 5 mA  
B
10  
20  
B
30  
30  
40  
40  
50  
0
0.4  
0.8  
1.2  
1.6  
2.0  
0
0.4  
0.8  
1.2  
1.6  
2.0  
Collector current  
I
C
(A)  
Collector current  
I
C
(A)  
V
– I  
h
– I  
FE C  
CE  
C
1.6  
1.2  
0.8  
0.4  
0
1000  
Common emitter  
Common emitter  
V
= 2 V  
CE  
500  
300  
Ta = −55°C  
Ta = 100°C  
25  
100  
I
= 5 mA  
10  
20  
30  
B
55  
50  
30  
40  
50  
10  
10  
30  
100  
300  
1000  
3000  
Collector current  
I
C
(mA)  
0
0.4  
0.8  
1.2  
1.6  
2.0  
Collector current  
I
C
(A)  
V
– I  
V
– I  
BE (sat) C  
CE (sat)  
C
1
10  
Common emitter  
/I = 20  
Common emitter  
/I = 20  
I
I
C B  
0.5  
0.3  
5
3
C B  
Ta = −55°C  
0.1  
1
Ta = 100°C  
0.05  
0.03  
0.5  
0.3  
25  
100  
25  
55  
0.01  
10  
0.1  
10  
30  
100  
300  
1000  
3000  
30  
100  
300  
1000  
3000  
Collector current  
I
C
(mA)  
Collector current  
I
C
(mA)  
3
2012-10-16  
2SC2873  
I
– V  
Safe Operating Area  
C
BE  
2.0  
1.5  
1.0  
0.5  
0
5000  
3000  
I
max (pulse)*  
C
Common emitter  
= 2 V  
I
max (continuous)  
1 ms*  
10 ms*  
C
V
CE  
100 ms*  
1000  
1 S*  
500  
300  
Ta = 100°C  
25 55  
DC operation  
Ta = 25°C  
100  
50  
30  
*: Single no repetitive pulse  
Ta = 25°C  
Curves must be derated linearly  
with increase in temperature  
Tested without a substrate  
10  
5
0
0.4  
0.8  
1.2  
1.6  
2.0  
V
max  
CEO  
Base-emitter voltage  
V
(V)  
0.1  
0.3  
1
3
10  
30  
100  
BE  
Collector-emitter voltage  
V
(V)  
CE  
P
Ta  
C
1.2  
1.0  
0.8  
0.6  
0.4  
0.2  
0
(1) Mounted on a ceramic  
substrate (250 mm2 × 0.8 t)  
(2) No heat sink  
(1)  
(2)  
0
20  
40  
60  
80  
100  
120  
140  
160  
Ambient temperature Ta (°C)  
4
2012-10-16  
2SC2873  
RESTRICTIONS ON PRODUCT USE  
Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information  
in this document, and related hardware, software and systems (collectively "Product") without notice.  
This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with  
TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission.  
Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are  
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and  
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily  
injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the  
Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of  
all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes  
for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the  
instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their  
own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such  
design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts,  
diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating  
parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR  
APPLICATIONS.  
PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE  
EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH  
MAY CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT  
("UNINTENDED USE"). Except for specific applications as expressly stated in this document, Unintended Use includes, without  
limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for  
automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions,  
safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. IF YOU USE  
PRODUCT FOR UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT. For details, please contact your  
TOSHIBA sales representative.  
Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.  
Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any  
applicable laws or regulations.  
The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any  
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to  
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.  
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE  
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY  
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR  
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND  
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO  
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS  
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.  
Do not use or otherwise make available Product or related software or technology for any military purposes, including without  
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile  
technology products (mass destruction weapons). Product and related software and technology may be controlled under the  
applicable export laws and regulations including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the  
U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited  
except in compliance with all applicable export laws and regulations.  
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.  
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,  
including without limitation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES  
OCCURRING AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.  
5
2012-10-16  

相关型号:

2SC2873-Y

NPN Silicon Epitaxial Transistors
MCC

2SC2873-Y(T2LDI,CF

Small Signal Bipolar Transistor
TOSHIBA

2SC2873-Y(TE12L,CF

Trans GP BJT NPN 50V 2A 4-Pin(3+Tab) PW-Mini T/R
TOSHIBA

2SC2873-Y(TE12L,F)

TRANSISTOR,BJT,NPN,50V V(BR)CEO,2A I(C),SOT-89
TOSHIBA

2SC2873-Y(TE12L,ZC

Small Signal Bipolar Transistor, 2A I(C), 50V V(BR)CEO, 1-Element, NPN, Silicon
TOSHIBA

2SC2873-Y(TE12R,F)

Small Signal Bipolar Transistor
TOSHIBA

2SC2873-Y-TP-HF

暂无描述
MCC

2SC2873O

TRANSISTOR | BJT | NPN | 50V V(BR)CEO | 2A I(C) | SC-62
ETC

2SC2873O-G

General Purpose Transistor
COMCHIP

2SC2873TA

Small Signal Bipolar Transistor, 2A I(C), 50V V(BR)CEO, 1-Element, NPN, Silicon
DIODES

2SC2873TA

Small Signal Bipolar Transistor, 2A I(C), 50V V(BR)CEO, 1-Element, NPN, Silicon,
ZETEX

2SC2873Y

Power Amplifier Applications
TOSHIBA