2SC6034(TPF2,F) [TOSHIBA]

TRANSISTOR,BJT,NPN,285V V(BR)CEO,1A I(C),SC-71VAR;
2SC6034(TPF2,F)
型号: 2SC6034(TPF2,F)
厂家: TOSHIBA    TOSHIBA
描述:

TRANSISTOR,BJT,NPN,285V V(BR)CEO,1A I(C),SC-71VAR

文件: 总5页 (文件大小:194K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
2SC6034  
TOSHIBA Transistor Silicon NPN Triple Diffused Type  
2SC6034  
High-Speed, High-Voltage Switching Applications  
Unit: mm  
Switching Regulator Applications  
DC-DC Converter Applications  
High-speed switching: t = 0.24 μs (max) (I = 0.3 A)  
f C  
Absolute Maximum Ratings (Ta = 25°C)  
Characteristic  
Collector-base voltage  
Symbol  
Rating  
Unit  
V
CBO  
V
CEO  
V
EBO  
600  
285  
V
V
V
Collector-emitter voltage  
Emitter-base voltage  
8
1. Base  
2. Collector  
3. Emitter  
DC  
I
1.0  
C
Collector current  
A
Pulse  
I
2.0  
CP  
Base current  
I
0.5  
A
B
JEDEC  
JEITA  
Collector power dissipation  
Junction temperature  
P
1.0  
W
°C  
°C  
C
T
150  
j
TOSHIBA  
2-7D101A  
Storage temperature range  
T
stg  
55 to 150  
Weight: 0.2 g (typ.)  
Note1: Using continuously under heavy loads (e.g. the application of high  
temperature/current/voltage and the significant change in  
temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating  
conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings.  
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook  
(“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report  
and estimated failure rate, etc).  
1
2009-12-21  
2SC6034  
Electrical Characteristics (Ta = 25°C)  
Characteristic  
Symbol  
Test Condition  
= 600 V, I = 0  
Min  
Typ.  
Max  
Unit  
Collector cut-off current  
I
V
V
100  
100  
μA  
μA  
V
CBO  
CB  
EB  
E
Emitter cut-off current  
I
= 8 V, I = 0  
C
EBO  
Collector-base breakdown voltage  
Collector-emitter breakdown voltage  
V
V
I
I
= 1 mA, I = 0  
600  
285  
100  
125  
80  
(BR) CBO  
(BR) CEO  
C
C
B
= 10 mA, I = 0  
V
B
h
h
h
V
V
V
= 5 V, I = 1 mA  
250  
250  
FE (1)  
FE (2)  
FE (3)  
CE  
CE  
CE  
C
DC current gain  
= 5 V, I = 0.1 A  
C
= 5 V, I = 0.2 A  
C
Collector emitter saturation voltage  
Base-emitter saturation voltage  
V
I
I
= 0.6 A, I = 75 mA  
1.0  
1.3  
V
V
CE (sat)  
BE (sat)  
C
C
B
V
= 0.6 A, I = 75 mA  
B
V
200 V  
20 μs  
CC  
Rise time  
t
0.4  
3.5  
r
I
C
I
B1  
I
B2  
OUT-  
PUT  
Switching time  
μs  
Storage time  
Fall time  
t
stg  
I
B21  
INPUT  
I
= 20 mA, I = 50 mA  
B1  
B2  
t
0.24  
f
DUTY CYCLE 1%  
Marking  
C6034  
Part No. (or abbreviation code)  
Lot No.  
Note2  
Note2: A line under a Lot No. identifies the indication of product Labels.  
Not underlined: [[Pb]]/INCLUDES > MCV  
Underlined: [[G]]/RoHS COMPATIBLE or [[G]]/RoHS [[Pb]]  
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS  
compatibility of Product. The RoHS is the Directive 2002/95/EC of the European Parliament and of the Council of 27  
January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment.  
2
2009-12-21  
2SC6034  
I
– V  
CE  
I
– V  
CE  
C
C
1.0  
0.8  
0.6  
0.4  
0.2  
0
2.0  
1.6  
1.2  
0.8  
0.4  
0
250  
150  
100  
80  
Common emitter  
Ta=25℃  
250  
200  
150  
200  
Pulse test  
60  
100  
40  
80  
40  
20  
60  
10  
20  
10  
I
= 5 mA  
B
Common emitter  
Ta=25℃  
I
= 5 mA  
B
Pulse test  
0
0.4  
0.8  
1.2  
1.6  
2.0  
0
2
4
6
8
10  
Collectoremitter voltage  
V
(V)  
CE  
Collectoremitter voltage  
V
(V)  
CE  
h
– I  
C
V
– I  
C
FE  
CE (sat)  
1000  
10  
Common emitter  
β= 8  
Ta = 100°C  
Pulse test  
25  
1
100  
10  
1
55  
Ta = 100°C  
0.1  
55  
Common emitter  
25  
V
= 5 V  
CE  
Pulse test  
0.01  
0.001  
0.01  
0.1  
C
1
0.001  
0.01  
0.1  
1
Collector current  
I
(A)  
Collector current  
I
(A)  
C
V
– I  
C
BE (sat)  
I
– V  
C
BE  
10  
1.0  
0.8  
0.6  
Common emitter  
Common emitter  
= 5 V  
I
/I = 8  
C B  
V
CE  
Pulse test  
Pulse test  
Ta = 55°C  
1
100  
0.4  
0.2  
25  
Ta = 100°C  
0.4  
25  
55  
0.1  
0.001  
0.01  
0.1  
1
0
0
Collector current  
I
(A)  
0.2  
0.6  
0.8  
1.0  
1.2  
C
Baseemitter voltage  
V
(V)  
BE  
3
2009-12-21  
2SC6034  
r
th  
– t  
w
1000  
100  
10  
Curves apply only to limited areas of thermal resistance.  
Single nonrepetitive pulse Ta = 25°C  
1
0.001  
0.01  
0.1  
1
10  
100  
1000  
Pulse width  
t
(s)  
w
Safe operating area  
P
Ta  
C
10  
1.2  
1.0  
0.8  
I
max (Pulse)*  
C
100 μs*  
1
100 ms*  
10 μs*  
10 ms*  
1 ms*  
0.6  
0.4  
0.2  
0.1  
DC operation  
Ta = 25°C  
0
0
40  
80  
120  
160  
200  
0.01  
*:Single nonrepetitive pulse  
Ta = 25°C  
Ambient temperature Ta (°C)  
Curves must be derated  
linearly with increase in  
temperature.  
V
max  
CEO  
100  
0.001  
1
10  
1000  
Collectoremitter voltage  
V
(V)  
CE  
4
2009-12-21  
2SC6034  
RESTRICTIONS ON PRODUCT USE  
Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information  
in this document, and related hardware, software and systems (collectively “Product”) without notice.  
This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with  
TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.  
Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are  
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and  
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily  
injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the  
Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of  
all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes  
for Product and the precautions and conditions set forth in the “TOSHIBA Semiconductor Reliability Handbook” and (b) the  
instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their  
own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such  
design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts,  
diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating  
parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR  
APPLICATIONS.  
Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring  
equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.  
Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or  
reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious  
public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used  
in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling  
equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric  
power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this  
document.  
Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.  
Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any  
applicable laws or regulations.  
The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any  
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to  
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.  
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE  
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY  
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR  
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND  
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO  
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS  
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.  
Do not use or otherwise make available Product or related software or technology for any military purposes, including without  
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile  
technology products (mass destruction weapons). Product and related software and technology may be controlled under the  
Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product  
or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.  
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.  
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,  
including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of  
noncompliance with applicable laws and regulations.  
5
2009-12-21  

相关型号:

2SC6034(TPF2,Q)

TRANSISTOR,BJT,NPN,285V V(BR)CEO,1A I(C),SC-71VAR
TOSHIBA

2SC6036

Silicon NPN epitaxial planar type
PANASONIC

2SC6036G

Small Signal Bipolar Transistor, 0.5A I(C), 12V V(BR)CEO, 1-Element, NPN, Silicon, ROHS COMPLIANT, SSSMINI3-F2, 3 PIN
PANASONIC

2SC6037G

Small Signal Bipolar Transistor, 0.5A I(C), 12V V(BR)CEO, 1-Element, NPN, Silicon, ROHS COMPLIANT, SSMINI3-F3, 3 PIN
PANASONIC

2SC6040

High-Speed and High-Voltage Switching Applications Switching Regulator Applications DC-DC Converter Applications
TOSHIBA

2SC6041

TOSHIBA Transistor Silicon NPN Triple-Diffused Mesa Type
TOSHIBA

2SC6042

Silicon NPN Triple Diffused Type
TOSHIBA

2SC6043

NPN Epitaxial Planar Silicon Transistors High-Current Switching Applications
SANYO

2SC6044

NPN Epitaxial Planar Silicon Transistors High-Current Switching Applications
SANYO

2SC6046

GENERAL PURPOSE HIGH CURRENT DRIVE APPLICATION SILICON NPN EPITAXIAL TYPE
ISAHAYA

2SC6046_10

FOR GENERAL PURPOSE HIGH CURRENT DRIVE APPLICATION SILICON NPN EPITAXIAL TYPE
ISAHAYA

2SC605

NPN SILICON TRANSISTOR
ETC