2SJ338Y(SM) [TOSHIBA]
暂无描述;
| 型号： | 2SJ338Y(SM) |
| 厂家： | 
TOSHIBA |
| 描述： | 暂无描述 放大器 功率放大器 |
| 文件： | 总3页 (文件大小：126K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
2SJ338
TOSHIBA Field Effect Transistor Silicon P-Channel MOS Type
2SJ338
Audio-Frequency Power Amplifier Applications
Unit: mm
z High breakdown voltage
: V
= −180 V
DSS
z High forward transfer admittance
z Complementary to 2SK2162
: |Y | = 0.7 S (typ.)
fs
Absolute Maximum Ratings (Ta = 25°C)
Characteristic
Drain−source voltage
Symbol
Rating
Unit
V
V
−180
±20
V
V
DSS
Gate−source voltage
Drain current
GSS
(Note 1)
I
−1
A
D
Power dissipation (Tc = 25°C)
Channel temperature
Storage temperature range
P
20
W
°C
°C
D
ch
stg
T
150
T
−55~150
JEDEC
JEITA
―
Note 1: Ensure that the channel temperature does not exceed 150°C.
SC-64
Note 2: Using continuously under heavy loads (e.g. the application of high
temperature/current/voltage and the significant change in temperature,
etc.) may cause this product to decrease in the reliability significantly
even if the operating conditions (i.e. operating
TOSHIBA
2-7B1B
Weight: 0.36 g (typ.)
temperature/current/voltage, etc.) are within the absolute maximum
ratings. Please design the appropriate reliability upon reviewing the
Toshiba Semiconductor Reliability Handbook (“Handling
Precautions”/Derating Concept and Methods) and individual reliability
data (i.e. reliability test report and estimated failure rate, etc).
JEDEC
―
JEITA
SC-64
2-7J1B
TOSHIBA
Weight: 0.36 g (typ.)
1
2006-11-16
2SJ338
Electrical Characteristics (Ta = 25°C)
Characteristic
Gate leakage current
Symbol
Test Condition
Min
Typ.
Max
Unit
I
V
= 0, V = ±20 V
GS
—
—
—
±100
—
nA
V
GSS
DS
= −10 mA, V = 0
GS
Drain−source breakdown voltage
Gate−source cutoff voltage
V
V
I
−180
(BR) DSS
GS (OFF)
D
V
= −10 V, I = −10 mA
−0.8
—
−2.8
V
DS
D
(Note 3)
Drain−source saturation voltage
Forward transfer admittance
Input capacitance
V
I
= −0.6 A, V
= −10 V
—
—
—
—
—
−1.2
0.7
210
90
−3.0
—
V
S
DS (ON)
|Y |
D
GS
V
V
V
V
= −10 V, I = −0.3 A
fs
DS
DS
DS
DS
D
C
= −10 V, V
= −10 V, V
= −10 V, V
= 0 , f = 1 MHz
= 0 , f = 1 MHz
= 0 , f = 1 MHz
—
iss
GS
GS
GS
pF
Output capacitance
C
—
oss
Reverse transfer capacitance
Q
45
—
rss
Note 3: V
Classification
O: −0.8~−1.6, Y: −1.4~−2.8
GS (OFF)
This transistor is an electrostatic-sensitive device. Handle with care.
Marking
J338
Part No. (or abbreviation code)
Lot No.
A line indicates
lead (Pb)-free package or
lead (Pb)-free finish.
2
2006-11-16
2SJ338
RESTRICTIONS ON PRODUCT USE
20070701-EN
• The information contained herein is subject to change without notice.
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc.
• The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his
document shall be made at the customer’s own risk.
• The products described in this document shall not be used or embedded to any downstream products of which
manufacture, use and/or sale are prohibited under any applicable laws and regulations.
• The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which
may result from its use. No license is granted by implication or otherwise under any patents or other rights of
TOSHIBA or the third parties.
• Please contact your sales representative for product-by-product details in this document regarding RoHS
compatibility. Please use these products in this document in compliance with all applicable laws and regulations
that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses
occurring as a result of noncompliance with applicable laws and regulations.
3
2006-11-16
相关型号：
2SJ341
Power Field-Effect Transistor, 5A I(D), 20V, 0.18ohm, 1-Element, P-Channel, Silicon, Metal-oxide Semiconductor FET, TO-126, TO-126FM, 3 PIN
HITACHI
©2020 ICPDF网 联系我们和版权申明