DF2S6.2FS [TOSHIBA]

Product for Use Only as Protection against Electrostatic Discharge (ESD).; 产品仅用于为防止静电放电( ESD ) 。
DF2S6.2FS
型号: DF2S6.2FS
厂家: TOSHIBA    TOSHIBA
描述:

Product for Use Only as Protection against Electrostatic Discharge (ESD).
产品仅用于为防止静电放电( ESD ) 。

文件: 总3页 (文件大小:116K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
DF2S6.2FS  
TOSHIBA Diodes for Protecting against ESD Epitaxial Planar Type  
DF2S6.2FS  
Product for Use Only as Protection against Electrostatic  
Discharge (ESD).  
Unit: mm  
0.6±0.05  
A
* This product is for protection against electrostatic discharge (ESD)  
only and is not intended for any other usage, including without  
limitation, the constant voltage diode application.  
z 2terminal ultra small package suitable for mounting on small space.  
0.2  
±0.05  
Absolute Maximum Ratings (Ta = 25°C)  
0.1±0.05  
0.07M  
A
Characteristic  
Power dissipation  
Symbol  
Rating  
Unit  
+0.02  
0.48  
-0.03  
P*  
150*  
150  
mW  
°C  
Junction temperature  
T
j
Storage temperature range  
T
stg  
55~150  
°C  
fSC  
Note: Using continuously under heavy loads (e.g. the application of high  
temperature/current/voltage and the significant change in  
temperature, etc.) may cause this product to decrease in the  
reliability significantly even if the operating conditions (i.e.  
operating temperature/current/voltage, etc.) are within the  
absolute maximum ratings.  
JEDEC  
JEITA  
TOSHIBA  
1-1L1A  
Please design the appropriate reliability upon reviewing the  
Toshiba Semiconductor Reliability Handbook (“Handling  
Precautions”/“Derating Concept and Methods”) and individual  
reliability data (i.e. reliability test report and estimated failure rate, etc).  
Weight: 0.0006 g (typ.)  
*: Mounted on a glass epoxy circuit board of 20 × 20 mm, pad dimension of 4 × 4 mm.  
Pad Dimension(Reference)Unit : mm  
0.85  
0.26  
0.21  
Electrical Characteristics (Ta = 25°C)  
Test  
Circuit  
Characteristic  
Zener voltage  
Symbol  
Test Condition  
= 5mA  
Min  
Typ.  
Max  
Unit  
V
Z
I
I
5.8  
6.2  
6.6  
30  
V
Z
Z
Dynamic impedance  
Reverse current  
= 5mA  
Z
Z
I
V
V
=5V  
2.5  
μA  
pF  
R
R
R
Total capacitance  
CT  
= 0V, f=1MHz  
32  
1
2007-11-01  
DF2S6.2FS  
Guaranteed Level of ESD Immunity  
Test Condition  
ESD Immunity Level  
± 30 kV  
IEC61000-4-2  
(Contact discharge)  
Criterion: No damage to device elements  
Marking  
Equivalent Circuit (Top View)  
6
CT - VR  
IZ - VZ  
100  
10  
1
100  
f=1MHz  
Ta=25°C  
Ta=25°C  
10  
0.1  
0.01  
0.001  
1
0
2
4
6
8
0
2
4
6
8
ZENER VOLTAGE VZ (V)  
REVERSE VOLTAGE VR(V)  
2
2007-11-01  
DF2S6.2FS  
RESTRICTIONS ON PRODUCT USE  
20070701-EN  
The information contained herein is subject to change without notice.  
TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor  
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical  
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of  
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of  
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.  
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as  
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and  
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability  
Handbook” etc.  
The TOSHIBA products listed in this document are intended for usage in general electronics applications  
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,  
etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires  
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or  
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or  
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,  
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his  
document shall be made at the customer’s own risk.  
The products described in this document shall not be used or embedded to any downstream products of which  
manufacture, use and/or sale are prohibited under any applicable laws and regulations.  
Please contact your sales representative for product-by-product details in this document regarding RoHS  
compatibility. Please use these products in this document in compliance with all applicable laws and regulations  
that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses  
occurring as a result of noncompliance with applicable laws and regulations.  
3
2007-11-01  

相关型号:

DF2S6.2FS(TL3AST)

Zener Diode, 6.2V V(Z), 6.45%, Silicon, Unidirectional
TOSHIBA

DF2S6.2FS(TL3PSE,E

Zener Diode, 6.2V V(Z), 6.45%, Silicon, Unidirectional
TOSHIBA

DF2S6.2FS(TL3SKT)

Zener Diode, 6.2V V(Z), 6.45%, Silicon, Unidirectional
TOSHIBA

DF2S6.2FS(TPL3)

ZENER DIODE,SINGLE, TWO TERMINAL,6.2V V(Z),6.5%,EMD2VAR
TOSHIBA

DF2S6.2FS,L3J

VOLTAGE REGULATOR DIODE
TOSHIBA

DF2S6.2FS,L3M

VOLTAGE REGULATOR DIODE
TOSHIBA

DF2S6.2FS,L3M(T

Zener Diode, 6.2V V(Z), 6.45%, Silicon, Unidirectional
TOSHIBA

DF2S6.2S

DIODE 6.2 V, 0.15 W, SILICON, UNIDIRECTIONAL VOLTAGE REGULATOR DIODE, 1-1K1A, SESC, 2 PIN, Voltage Regulator Diode
TOSHIBA

DF2S6.2S(TPL3,F)

Zener Diode
TOSHIBA

DF2S6.8CT

DIODE 6.8 V, 0.15 W, SILICON, UNIDIRECTIONAL VOLTAGE REGULATOR DIODE, ULTRA SMALL, CST2, 1-1P1A, 2 PIN, Voltage Regulator Diode
TOSHIBA

DF2S6.8FS

Product for Use Only as Protection against Electrostatic Discharge (ESD).
TOSHIBA

DF2S6.8S

Product for Use Only as Protection against Electrostatic Discharge (ESD).
TOSHIBA