HN2S02JE(NHF,F) [TOSHIBA]

Rectifier Diode, Schottky, 2 Element, 0.1A, 45V V(RRM), Silicon;
HN2S02JE(NHF,F)
型号: HN2S02JE(NHF,F)
厂家: TOSHIBA    TOSHIBA
描述:

Rectifier Diode, Schottky, 2 Element, 0.1A, 45V V(RRM), Silicon

开关
文件: 总4页 (文件大小:180K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
HN2S02FU  
TOSHIBA Diode Silicon Epitaxial Schottky Barrier Type  
HN2S02FU  
Unit: mm  
High Speed Switching Application  
z
z
z
HN2S02FU is composed of 3 independent diodes.  
Low forward voltage: V = 0.54V (typ.)  
F (3)  
Low reverse current: I = 5μA (max.)  
R
Absolute Maximum Ratings (Ta = 25°C)  
Characteristic  
Symbol  
Rating  
Unit  
Maximum (peak) reverse Voltage  
Reverse voltage  
V
45  
40  
V
V
RM  
V
R
Maximum (peak) forward current  
Average forward current  
Surge current (10ms)  
I
300 *  
100 *  
1 *  
mA  
mA  
A
FM  
I
O
I
FSM  
P
Power dissipation  
200 **  
125  
mW  
°C  
°C  
°C  
Junction temperature  
T
j
JEDEC  
Storage temperature range  
Operating temperature range  
T
55125  
40100  
stg  
opr  
JEITA  
T
TOSHIBA  
1-2T1C  
Weight: 6.2mg(Typ.)  
Note: Using continuously under heavy loads (e.g. the application of high  
temperature/current/voltage and the significant change in temperature, etc.) may cause this product to  
decrease in the reliability significantly even if the operating conditions (i.e. operating  
temperature/current/voltage, etc.) are within the absolute maximum ratings.  
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook  
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test  
report and estimated failure rate, etc).  
* : This is absolute maximum rating of single diode (Q1 or Q2 or Q3).  
In the case of using 2 ro 3 diodes, the absolute maximum ratings  
per diodes is 75 % of the single diode one.  
** :Total rating  
Electrical Characteristics (Q1, Q2, Q3 Common, Ta = 25°C)  
Test  
Circuit  
Characteristic  
Symbol  
Test Condition  
= 1mA  
Min  
Typ.  
Max  
Unit  
V
V
V
V
I
I
I
0.28  
0.36  
0.54  
F (1)  
F (2)  
F (3)  
F
F
F
Forward voltage  
= 10mA  
= 100mA  
= 40V  
0.60  
5
Reverse current  
I
V
V
μA  
R
R
Total capacitance  
C
= 0, f = 1MH  
z
18  
T
R
pF  
1
2007-11-01  
HN2S02FU  
Pin Assignment (Top View)  
Marking  
A9  
2
2007-11-01  
HN2S02FU  
RESTRICTIONS ON PRODUCT USE  
20070701-EN GENERAL  
The information contained herein is subject to change without notice.  
TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor  
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical  
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of  
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of  
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.  
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as  
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and  
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability  
Handbook” etc.  
The TOSHIBA products listed in this document are intended for usage in general electronics applications  
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,  
etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires  
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or  
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or  
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,  
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his  
document shall be made at the customer’s own risk.  
The products described in this document shall not be used or embedded to any downstream products of which  
manufacture, use and/or sale are prohibited under any applicable laws and regulations.  
The information contained herein is presented only as a guide for the applications of our products. No  
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which  
may result from its use. No license is granted by implication or otherwise under any patents or other rights of  
TOSHIBA or the third parties.  
Please contact your sales representative for product-by-product details in this document regarding RoHS  
compatibility. Please use these products in this document in compliance with all applicable laws and regulations  
that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses  
occurring as a result of noncompliance with applicable laws and regulations.  
3
2007-11-01  
HN2S02FU  
4
2007-11-01  

相关型号:

HN2S03FE

High Speed Switching Applications
TOSHIBA

HN2S03FE(TPL3,F)

ARRAY OF INDEPENDENT DIODES,TSOP
TOSHIBA

HN2S03FU

High Speed Switching Application
TOSHIBA

HN2S03T

High Speed Switching Application
TOSHIBA

HN2S03T(TE85L)

ARRAY OF INDEPENDENT DIODES,UMD4VAR
TOSHIBA

HN2S04FU

High-Speed Switching Application
TOSHIBA

HN2S05FU

High-Speed Switching Applications
TOSHIBA

HN2V02H

EPITAXIAL PLANAR TYPE (AM RADIO BAND TUNING APPLICATIONS)
TOSHIBA

HN2V02H-A

DIODE 16 V, SILICON, VARIABLE CAPACITANCE DIODE, FM8, 1-5J1C, 8 PIN, Variable Capacitance Diode
TOSHIBA

HN2V02H-B

DIODE 16 V, SILICON, VARIABLE CAPACITANCE DIODE, FM8, 1-5J1C, 8 PIN, Variable Capacitance Diode
TOSHIBA

HN2V02HA

DIODE VARIABLE CAPACITANCE DIODE, 1-5J1C, 8 PIN, Variable Capacitance Diode
TOSHIBA

HN2V02HB

DIODE 16 V, SILICON, VARIABLE CAPACITANCE DIODE, 1-5J1C, 8 PIN, Variable Capacitance Diode
TOSHIBA