LTM10C306L [TOSHIBA]
LIQUID CRYSTAL DISPLAY DIVISION PRODUCT INFORMATION; 液晶显示事业部产品信息
| 型号： | LTM10C306L |
| 厂家： | 
TOSHIBA |
| 描述： | LIQUID CRYSTAL DISPLAY DIVISION PRODUCT INFORMATION |
| 文件： | 总10页 (文件大小：112K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
26cm COLOUR TFT-LCD MODULE
(10.4 TYPE)
LIQUID CRYSTAL DISPLAY DIVISION
PRODUCT INFORMATION
LTM10C306L
(p-Si TFT)
FEATURES
(1) 10.4”XGA display size for notebook PC
TENTATIVE
(2) LVDS interface system
(3) Slim(5.5mmMAX) & light weight(265gTYP) design
MECHANICAL SPECIFICATIONS
Item
Specifications
Dimensional Outline (Typ.)
Number of Pixels
Active Area
Pixel Pitch
Weight (approximately)
Backlight
241.5(W) x 171.9(H) x 5.5max(D) mm
1024(W) x 768(H) pixels
210.432(W) x 157.824(H) mm
0.2055(W) x 0.2055(H)
265g
Single CCFL, Sidelight type
ABSOLUTE MAXIMUM RATINGS
Item
Min.
-0.3
0
Max.
4.5
2.0
100
DD+0.3
50
Unit
V
kV(rms)
kHz
V
°C
°C
%(RH)
Supply Voltage (VDD
)
(VFL)
FL Driving Frequency (fFL)
Input Signal Voltage (VIN)
Operating Temperature
Storage Temperature
Storage Humidity
-
-0.3
0
-20
10
V
60
90
ELECTRICAL SPECIFICATION
Item
Supply Voltage
Min.
3.0
600
1200
0
Typ.
3.3
650
---
Max.
3.6
700
1600
2.4
Unit
Remarks
(VDD
(VFL)
)
V
V(rms)
V(rms)
V
IFL=2.5 mA(rms)
FL Start Voltage (Ta=0°C)
Receiver Input Voltage
---
Differential Input High Threshold(VTH)*1
Differential Input Low Threshold(VTL)*1
---
OS-0.1
---
---
V
OS+0.1
---
V
V
V
V
OS:Offset Mode Voltage
OS=1.2V
V
Current Consumption
*2 (IDD
*3 (IFL)
)
---
2.0
---
360
2.5
2.8
---
5.0
---
mA
mA(rms)
W
*2 *3 Power Consumption
@70cd/m2
*1 : Refer to DF90CF364 Specification by National Semiconductor Corporation. This LCD module conforms to LVDS
standard (TIA/EIA-644)
*2 : 8 color bars pattern
*3 : Excepting the efficiency FL inverter
*4 : not use Hsync nor Vsync. Only ENAB control.
OPTICAL SPECIFICATION (Ta=25°C)
Item
Min.
100
---
Typ.
250
---
Max.
---
50
Unit
---
ms
Remarks
Contrast Ratio (CR)
Response Time
(tON
)
(tOFF
)
---
50
---
---
70
200
50
---
---
ms
cd/m2
cd/m2
Luminance (L)
IFL=2.5mA(rms)
IFL=5mA(rms)
*The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by
Toshiba or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any
patent or patent rights of Toshiba or others.
*The information contained herein may be changed without prior notice. It is therefore advisable to contact Toshiba before
proceeding with the design of equipment incorporating this product.
(1/10)
1999-10-14 (Ver.3.2)
LTM10C306L
DIMENSIONAL OUTLINE (front figure)
Unit : mm
Standard tolerance : ±0.5
R3.5
3.5
3.5
3.5
3.9
.5
3
3.0
153.4
145.4
3
13.0
10.0
4.0
.
10.0
0
±
2
.
3
φ
R1
.35
R3.5
3.5
3.0
3.5
161.2(BEZEL OPENING)
157.824(ACTIVE AREA)
4.6
0
.3
2.7±0.3
1.312
3
.
0
±
2
.
3
φ
R3
3.0
0
21.7
33.5
1
.
4.
0
10.0
3.6
77.6
±
7
137.9
.
2
152.9±0.3
155.9
161.9
φ
3.0
7.3
3.5
3.0
3.0
3.0
171.9
R1
R1
3.5
3.5
5.
5
3.5
3R
R3
9.5
24.5
(2/10)
1999-10-14 (Ver.3.2)
LTM10C306L
BLOCK DIAGRAM
I/F PCB
LVDS
Panel
Controller
Liquid Crystal Panel
1024 x 768 pixels
CN1
DC/DC
Converter
X-driver
Gray scale
Manipulation
Voltage
Generation
Circuit
D/A
Converter
Circuit
FPC
CN2
Backlight
1024, 1
1024 pixels
X2n-1, 1
1, 1
1, 2
2, 1
X2n, 1
1, Y
X2n-1, Y
X2n, Y
768 pixels
1, 768
1024,768
(3/10)
1999-10-14 (Ver.3.2)
LTM10C306L
TIMING CHART
V
V
V
V
ｔ
ｔ
ｔ
ｔ
ｔ
ｔ
ｔ
(4/10)
1999-10-14 (Ver.3.2)
LTM10C306L
Remarks
TIMING SPECIFICATION 1)2)3)4)5)6)
Item
Symbol
Min.
778 × t3
-
Typ.
806 × t3
16.67
Max.
860 × t3
17.25
Unit
-
ms
Frame Period
t1
Vertical
t2
t3
t4
t5
768 × t3
768 × t3
768 × t3
Display Term
One Line Scanning
Time
Horizontal
Display Term
-
-
µs
1319 × t5
20.04
1024 × t5
1344 × t5
20.68
1024 × t5
1462 × t5
-
1024 × t5
-
ns
Clock Period
15.0
15.38
-
Note 1) Refer to “TIMING CHART” and LVDS (DF90CF364MTD) specifications by National Semiconductor.
Note 2) If ENAB is fixed to "H" or "L" level for certain period while NCLK is supplied, the panel displays black with some
flicker.
Note 3) If NCLK is fixed to "H" or "L" level for certain period while ENAB is supplied, the panel may be damaged.
Note 4) Please adjust LCD operating signal timing and FL driving frequency, to optimize the display quality.
There is a possibility that flicker is observed by the interference of LCD operating signal timing and FL driving
Condition (especially driving frequency ), even if the condition satisfies above timing specifications and
recommended operating conditions shown in 3.
Note 5) Do not make t1,t2 and t3 fluctuate.
If t1,t2 and t3 are fluctuate, the panel displays black.
SEQUENCE OF POWER SUPPLIES AND SIGNALS
500ms(min.)
10ms(max.)
10ms(max.)
3.0V
3.0V
40ms(max.)
0ms(min.)
40ms(max.)
0ms(min.)
V DD
0.2V
0.2V
0.2V
NCLK
ENAB
DATA
0.2
V
0.2
V
DD
DD
(5/10)
1999-10-14 (Ver.3.2)
LTM10C306L
CONNECTOR PIN ASSIGNMENT FOR INTERFACE
CN1 INPUT SIGNAL
Connector :55176-1491 / MOLEX JAPAN CO., LTD.
Mating Connector : 51146-1400(housing) / MOLEX JAPAN CO., LTD.
Terminal No.
Symbol
VDD
VDD
Function
Power Supply : +3.3V
Power Supply : +3.3V
1
2
3
4
5
6
GND
GND
CK+
CK-
Sampling Clock (Positive : + )
Sampling Clock (Negative : - )
7
8
9
10
11
12
13
14
IN2+
IN2-
IN1+
IN1-
IN0+
IN0-
GND
GND
Transmission Data of Pixels 2 (Positive : + )
Transmission Data of Pixels 2 (Negative : - )
Transmission Data of Pixels 1 (Positive : + )
Transmission Data of Pixels 1 (Negative : - )
Transmission Data of Pixels 0 (Positive : + )
Transmission Data of Pixels 0 (Negative : - )
CN2 CCFL POWER SOURCE
Connector : HV-2S-C1C3 / JAPAN AVIATION ELECTRONICS INDUSTRY, LTD.
Mating Connector : HV-2P-HF / JAPAN AVIATION ELECTRONICS INDUSTRY, LTD.
Terminal No.
Symbol
VFLH
VFLL
Function
1
2
CCFL Power Supply ( high voltage)
CCFL Power Supply (low voltage)
(6/10)
1999-10-14 (Ver.3.2)
LTM10C306L
RECOMMENDED TRANSMITTER (DS90CF363) TO LTM10C306L INTERFACE ASSIGNMENT
Case1: 6bit Transmitter
DS90CF363
Input Signal
(Graphics controller output signal)
Symbol DS90CF363 Symbol Function
LTM10C306L
Interface
(CN1)
Terminal Symbol
Input Terminal No.
Output
Signal
Symbol
TIN0
TIN1
TIN2
TIN3
44
45
47
48
1
R0
R1
R2
R3
R4
Red Pixels Display Data (LSB)
Red Pixels Display Data
Red Pixels Display Data
Red Pixels Display Data
Red Pixels Display Data
TOUT0-
TOUT0+
No.12
No.11
IN0-
IN0+
TIN4
TIN5
TIN6
TIN7
TIN8
3
4
6
7
R5
Red Pixels Display Data (MSB)
Green Pixels Display Data (LSB)
Green Pixels Display Data
Green Pixels Display Data
Green Pixels Display Data
Green Pixels Display Data
Green Pixels Display Data (MSB)
Blue Pixels Display Data (LSB)
Blue Pixels Display Data
Blue Pixels Display Data
Blue Pixels Display Data
Blue Pixels Display Data
Blue Pixels Display Data (MSB)
Non Connection (open)
G0
G1
G2
G3
G4
G5
B0
B1
B2
B3
B4
TOUT1-
TOUT1+
No.10
No.9
IN1-
IN1+
TIN9
9
TIN10
TIN11
TIN12
TIN13
TIN14
TIN15
TIN16
TIN17
TIN18
TIN19
TIN20
CLK IN
10
12
13
15
16
18
19
20
22
23
25
26
TOUT2-
TOUT2+
No.8
No.7
IN2-
IN2+
B5
NC
NC
ENAB
NCLK
Non Connection (open)
Compound Synchronization Signal
Data Sampling Clock
TCLK OUT-
TCLK OUT+ No.5
No.6
CLK IN-
CLK IN+
TIN6
TIN5
TIN4
TIN3
TIN2
TIN1
TIN0
IN0
G0
R5
R4
R3
R2
R1
R0
TIN7
TIN13
TIN12
TIN11
TIN10
TIN9
TIN8
IN1
IN2
B1
B0
G5
G3
G2
G1
G4
TIN20
TIN19
TIN18
TIN17
TIN16
TIN15
TIN14
B4
NC
B5
B3
B2
NC
ENAB
(7/10)
1999-10-14 (Ver.3.2)
LTM10C306L
RECOMMENDED TRANSMITTER (DS90CF383) TO LTM10C306L INTERFACE ASSIGNMENT
Case2: 8bit Transmitter
DS90CF383
Input Signal
(Graphics controller output signal)
Symbol DS90CF383 Symbol Function
LTM10C306L
Interface
(CN1)
Terminal Symbol
Input Terminal No.
Output
Signal
Symbol
TIN0
TIN1
TIN2
TIN3
TIN4
TIN6
TIN7
TIN8
51
52
54
55
56
3
4
6
7
11
12
14
15
19
20
22
23
24
27
28
30
50
2
R0
R1
R2
R3
R4
Red Pixels Display Data (LSB)
Red Pixels Display Data
Red Pixels Display Data
Red Pixels Display Data
Red Pixels Display Data
Red Pixels Display Data (MSB)
Green Pixels Display Data(LSB)
Green Pixels Display Data
Green Pixels Display Data
Green Pixels Display Data
Green Pixels Display Data
Green Pixels Display Data(MSB)
Blue Pixels Display Data (LSB)
Blue Pixels Display Data
Blue Pixels Display Data
Blue Pixels Display Data
Blue Pixels Display Data
Blue Pixels Display Data (MSB)
Non Connection (open)
Non Connection (open)
Compound Synchronization Signal
Non Connection (open)
Non Connection (open)
Non Connection (open)
Non Connection (open)
Non Connection (open)
Non Connection (open)
Non Connection (open)
TOUT0-
TOUT0+
No.12
No.11
IN0-
IN0+
R5
G0
G1
G2
G3
G4
G5
B0
B1
B2
B3
B4
TIN9
TOUT1-
TOUT1+
No.10
No.9
IN1-
IN1+
TIN12
TIN13
TIN14
TIN15
TIN18
TIN19
TIN20
TIN21
TIN22
TIN24
TIN25
TIN26
TIN27
TIN5
TIN10
TIN11
TIN16
TIN17
TIN23
CLK IN
TOUT2-
TOUT2+
No.8
No.7
IN2-
IN2+
B5
NC
NC
ENAB
NC
NC
NC
NC
NC
NC
NC
NCLK
TOUT3-
TOUT3+
8
10
16
18
25
31
Data Sampling Clock
TCLK OUT-
TCLK OUT+ No.5
No.6
CLK IN-
CLK IN+
T I N 7
T I N 6
T I N 4
T I N 3
T I N 2
T I N 1
T I N 0
IN0
G0
R5
R4
R3
R2
R1
R0
T I N 8
T I N 1 8
T I N 1 5
T I N 1 4
T I N 1 3
T I N 1 2
T I N 9
IN1
IN2
IN3
B1
B0
G5
G3
G2
G1
G4
T I N 2 6
T I N 2 5
T I N 2 4
T I N 2 2
T I N 2 1
T I N 2 0
T I N 1 9
B4
NC
NC
B5
B3
B2
ENAB
T I N 2 3
T I N 1 7
T I N 1 6
T I N 1 1
T I N 1 0
T I N 5
T I N 2 7
NC
NC
NC
NC
NC
NC
NC
(8/10)
1999-10-14 (Ver.3.2)
LTM10C306L
256k (k=1024) COLORS COMBINATION TABLE
Gray Scale
R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0
Display
Black
Blue
Green
Light Blue
Red
Purple
Yellow
White
Black
Level
L
L
L
L
H
H
H
H
L
L
L
L
L
L
L
H
H
H
H
L
L
L
L
L
L
L
H
H
H
H
L
L
L
L
L
L
L
H
H
H
H
L
L
L
L
L
L
L
H
H
H
H
L
L
H
L
L
L
L
H
H
H
H
L
H
L
L
L
H
H
L
L
H
H
L
L
L
L
L
H
H
L
L
H
H
L
L
L
L
L
H
H
L
L
H
H
L
L
L
L
L
H
H
L
L
H
H
L
L
L
L
L
H
H
L
L
H
H
L
L
L
L
L
H
H
L
L
H
H
L
L
L
L
H
L
H
L
H
L
H
L
L
L
L
H
L
H
L
H
L
H
L
L
L
L
H
L
H
L
H
L
H
L
L
L
L
H
L
H
L
H
L
H
L
L
L
L
H
L
H
L
H
L
H
L
L
L
L
H
L
H
L
H
L
H
L
L
L
-
-
-
-
-
-
-
-
Basic
Color
L 0
L 1
L 2
Gray
Scale of
Red
Dark
↑
↓
:
:
:
:
:
:
…
L3
L60
Light
H
H
H
L
L
L
H
H
H
L
L
L
H
H
H
L
L
L
H
H
H
L
L
L
L
H
H
L
L
L
H
L
H
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
H
L
L
L
L
H
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L61
L62
L63
L 0
L 1
L 2
Red
Red
Black
Gray
Scale of
Green
Dark
↑
↓
:
:
:
:
:
:
…
L3
L60
Light
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
H
H
H
L
L
L
H
H
H
L
L
L
H
H
H
L
L
L
H
H
H
L
L
L
L
H
H
L
L
L
H
L
H
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
H
L
L
L
L
H
L
L61
L62
Green L63
L 0
Green
Black
L 1
L 2
Gray
Scale of
Blue
Dark
↑
↓
:
:
:
:
:
:
…
L3
L60
Light
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
H
L
L
L
L
H
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
H
L
L
L
L
H
L
H
H
H
L
L
L
H
H
H
L
L
L
H
H
H
L
L
L
H
H
H
L
L
L
L
H
H
L
L
H
H
L
H
L
H
L
L61
L62
Blue L63
L 0
Blue
Black
Gray
Scale of
White &
Black
L 1
L 2
Dark
↑
↓
:
:
:
:
:
:
…
L3
L60
Light
H
H
H
H
H
H
H
H
H
H
H
H
L
H
H
H
L
H
H
H
H
H
H
H
H
H
H
H
H
H
L
H
H
H
L
H
H
H
H
H
H
H
H
H
H
H
H
H
L
H
H
H
L
H
L61
L62
White L63
White
(9/10)
1999-10-14 (Ver.3.2)
LTM10C306L
!
FOR SAFETY
LCD module is generally designed with precise parts to achieve light weighted thin mechanical dimensions.
In using our Modules, make certain that you fully understand and put into practice the warnings and safety precautions
detailed in Engineering Information No.EE-N001,"CAUTIONS AND INSTRUCTIONS FOR TOSHIBA LCD MODULES".
Refer to individual specifications and TECHNICAL DATA sheets (hereinafter called "TD") for more detailed technical
information.
1) SPECIAL PURPOSES
A) Toshiba's Standard LCD Modules have not been customized for operation in extreme environments or for use in
applications where performance failures could be life-threatening or otherwise catastrophic.
B) Since Toshiba's Standard LCD Modules have not been designed for operation in extreme environments, they must never
be used in devices that will be exposed to abnormally high levels of vibration or shock which exceed Toshiba's published
specification limits.
C) In addition, since Toshiba Standard LCD Modules have not been designed for use in applications where performance
failures could be life-threatening or catastrophic, they must never be installed in aircraft navigation control systems (such as,
but not limited to Traffic Collision Avoidance System and Air Traffic Indicator), in military defense or weapons systems, in
critical industrial process-control systems (e.g., those involved in the production of nuclear energy), or in critical medical
device or patient life-support systems.
2) DISASSEMBLING OR MODIFICATION
DO NOT DISASSEMBLE OR MODIFY the module. It may damage sensitive parts inside LCD module, and may cause
scratches or dust on the display.
Toshiba doses not warrant the module, if customer disassembled or modified it.
3) BREAKAGE OF LCD PANEL
DO NOT INGEST liquid crystal material, DO NOT INHALE this material, and DO NOT CONTACT the material with skin, if
LCD panel is broken and liquid crystal material spills out.
If liquid crystal material comes into mouth or eyes, rinse mouth or eyes out with water immediately.
If this material contact with skin or cloths, wash it off immediately with alcohol and rinse thoroughly with water.
4) GLASS OF LCD PANEL
BE CAREFUL WITH CHIPS OF GLASS that may cause injuring fingers or skin, when the glass is broken.
5) ELECTRIC SHOCK
DISCONNECT POWER SUPPLY before handling LCD module.
DO NOT TOUCH the parts inside LCD module and the fluorescent lamp's connector or cables in order to prevent electric
shock, because high voltage is supplied to these parts from the inverter unit while power supply is turned on.
6) ABSOLUTE MAXIMUM RATINGS AND POWER PROTECTION CIRCUIT
DO NOT EXCEED the absolute maximum rating values under the worst probable conditions caused by the supply voltage
variation, input voltage variation, variation in parts' constants, environmental temperature, etc., otherwise LCD module may
be damaged.
Employ protection circuit for power supply, whenever the specification or TD specifies it.
Suitable protection circuit should be applied for each system design.
DISPOSAL
7)
When dispose LCD module, obey to the applicable environmental regulations.
(10/10)
1999-10-14 (Ver.3.2)
相关型号：
©2020 ICPDF网 联系我们和版权申明