RN1102FT(TE85L,F) [TOSHIBA]
PRE-BIASED "DIGITAL" TRANSISTOR,50V V(BR)CEO,100MA I(C),SOT-416VAR;型号: | RN1102FT(TE85L,F) |
厂家: | TOSHIBA |
描述: | PRE-BIASED "DIGITAL" TRANSISTOR,50V V(BR)CEO,100MA I(C),SOT-416VAR |
文件: | 总8页 (文件大小:624K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
RN1101FT~RN1106FT
TOSHIBA Transistor Silicon NPN Epitaxial Type (PCT process) (Bias Resistor built-in Transistor)
RN1101FT, RN1102FT, RN1103FT
RN1104FT, RN1105FT, RN1106FT
Switching, Inverter Circuit, Interface Circuit and
Driver Circuit Applications
Unit: mm
•
•
High-density mount is possible because of devices housed in very thin
TESM packages.
Incorporating a bias resistor into a transistor reduces parts count.
Reducing the parts count enable the manufacture of ever more compact
equipment and save assembly cost.
•
•
Wide range of resistor values are available to use in various circuit
designs.
Complementary to RN2101FT to RN2106FT
Equivalent Circuit and Bias Resistor Values
C
Type No.
R1 (kΩ)
R2 (kΩ)
RN1101FT
RN1102FT
RN1103FT
RN1104FT
RN1105FT
RN1106FT
4.7
10
4.7
10
22
47
47
47
R1
B
JEDEC
JEITA
―
―
22
47
E
TOSHIBA
2-1B1A
2.2
4.7
Weight:2.2 mg (typ.)
Absolute Maximum Ratings (Ta = 25°C)
Characteristics
Symbol
Rating
Unit
Collector-base voltage
RN1101FT to 1106FT
Collector-emitter voltage
V
V
50
50
V
V
CBO
CEO
RN1101FT to 1104FT
Emitter-base voltage
10
V
V
EBO
RN1105FT, RN1106FT
5
Collector current
I
100
100
150
mA
mW
°C
C
Collector power dissipation
RN1101FT to 1106FT
Junction temperature
P
C
T
j
Storage temperature range
T
stg
−55 to 150
°C
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if
the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
1
2010-03-07
RN1101FT~RN1106FT
Electrical Characteristics (Ta = 25°C)
Characteristics
Symbol
Test Condition
= 50 V, I = 0
Min
Typ.
Max
Unit
nA
I
I
V
V
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
100
500
1.52
0.71
0.33
0.15
0.145
0.138
⎯
CBO
CEO
CB
CE
E
Collector cut-off current
RN1101FT to 1106FT
= 50 V, I = 0
B
RN1101FT
RN1102FT
RN1103FT
RN1104FT
RN1105FT
RN1106FT
RN1101FT
RN1102FT
RN1103FT
RN1104FT
RN1105FT
RN1106FT
0.82
0.38
0.17
0.082
0.078
0.074
30
V
V
= 10 V, I = 0
C
EB
EB
Emitter cut-off current
I
mA
EBO
= 5 V, I = 0
C
50
⎯
70
⎯
DC current gain
h
V
= 5 V, I = 10 mA
CE C
FE
80
⎯
80
⎯
80
⎯
Collector-emitter
saturation voltage
I
I
= 5 mA,
C
B
RN1101FT to 1106FT
V
⎯
0.1
0.3
V
V
CE (sat)
= 0.25 mA
RN1101FT
RN1102FT
1.1
1.2
1.3
1.5
0.6
0.7
1.0
0.5
⎯
⎯
⎯
2.0
2.4
3.0
5.0
1.1
1.3
1.5
0.8
⎯
RN1103FT
⎯
Input voltage (ON)
V
V
V
= 0.2 V, I = 5 mA
C
I (ON)
CE
RN1104FT
⎯
RN1105FT
⎯
RN1106FT
⎯
RN1101FT to 1104FT
RN1105FT, 1106FT
RN1101FT to 1106FT
⎯
Input voltage (OFF)
Transition frequency
V
= 5 V, I = 0.1 mA
V
I (OFF)
CE
C
⎯
f
V
V
= 10 V, I = 5 mA
250
MHz
pF
T
CE
CB
C
Collector output
capacitance
= 10 V, I = 0,
E
RN1101FT to 1106FT
C
ob
⎯
3
6
f = 1 MHz
RN1101FT
RN1102FT
3.29
7
4.7
10
6.11
13
RN1103FT
15.4
32.9
1.54
3.29
0.9
22
28.6
61.1
2.86
6.11
1.1
Input resistor
Resistor ratio
R1
⎯
⎯
kΩ
RN1104FT
47
RN1105FT
2.2
4.7
1.0
RN1106FT
RN1101FT to 1104FT
RN1105FT
R1/R2
0.0421 0.0468 0.0515
0.09 0.1 0.11
RN1106FT
2
2010-03-07
RN1101FT~RN1106FT
RN1101FT
RN1102FT
100
RN1104FT
RN1103FT
RN1106FT
RN1105FT
3
2010-03-07
RN1101FT~RN1106FT
RN1102FT
RN1101FT
RN1103FT
RN1104FT
RN1105FT
RN1106FT
4
2010-03-07
RN1101FT~RN1106FT
RN1102FT
RN1101FT
RN1103FT
RN1105FT
RN1104FT
RN1106FT
5
2010-03-07
RN1101FT~RN1106FT
RN1101FT
RN1102FT
RN1103FT
RN1104FT
RN1105FT
RN1106FT
6
2010-03-07
RN1101FT~RN1106FT
Type Name
RN1101FT
Marking
Type name
Type name
Type name
Type name
Type name
Type name
X A
RN1102FT
RN1103FT
RN1104FT
RN1105FT
RN1106FT
X B
X C
X D
X E
X F
7
2010-03-07
RN1101FT~RN1106FT
RESTRICTIONS ON PRODUCT USE
•
•
•
Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively “Product”) without notice.
This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.
Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the Product,
or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of all
relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for
Product and the precautions and conditions set forth in the “TOSHIBA Semiconductor Reliability Handbook” and (b) the instructions for
the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their own product
design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or
applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams,
programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for
such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR APPLICATIONS.
•
Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring
equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.
Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or
reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious public
impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used in the
aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling
equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric
power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this
document.
•
•
Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
•
•
The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
• Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation,
for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology
products (mass destruction weapons). Product and related software and technology may be controlled under the Japanese Foreign
Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product or related software
or technology are strictly prohibited except in compliance with all applicable export laws and regulations.
•
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of
noncompliance with applicable laws and regulations.
8
2010-03-07
相关型号:
RN1102FV
TRANSISTOR 100 mA, 50 V, NPN, Si, SMALL SIGNAL TRANSISTOR, 2-1L1A, VESM, 3 PIN, BIP General Purpose Small Signal
TOSHIBA
RN1102MFV(TL3MAA)
Small Signal Bipolar Transistor, 0.1A I(C), 50V V(BR)CEO, 1-Element, NPN, Silicon
TOSHIBA
RN1102MFV(TL3SAN)
Small Signal Bipolar Transistor, 0.1A I(C), 50V V(BR)CEO, 1-Element, NPN, Silicon
TOSHIBA
RN1102MFVTPL3
Switching, Inverter Circuit, Interface Circuit and Driver Circuit Applications
TOSHIBA
RN1103ACT
TRANSISTOR 80 mA, 50 V, NPN, Si, SMALL SIGNAL TRANSISTOR, CST3, 2-1J1A, 3 PIN, BIP General Purpose Small Signal
TOSHIBA
RN1103CT
Switching Applications Inverter Circuit Applications Interface Circuit Applications Driver Circuit Applications
TOSHIBA
©2020 ICPDF网 联系我们和版权申明