首页 |元器件品牌

RN1106MFV(TL3MAA) [TOSHIBA]

Small Signal Bipolar Transistor, 0.1A I(C), 50V V(BR)CEO, 1-Element, NPN, Silicon;
RN1106MFV(TL3MAA)
型号： RN1106MFV(TL3MAA)
厂家： TOSHIBA    TOSHIBA
描述：

Small Signal Bipolar Transistor, 0.1A I(C), 50V V(BR)CEO, 1-Element, NPN, Silicon

开关 光电二极管 晶体管
文件： 总8页 (文件大小：1034K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
RN1101MFV∼RN1106MFV  
TOSHIBA Transistor Silicon NPN Epitaxial Type (PCT Process)  
RN1101MFV, RN1102MFV, RN1103MFV  
RN1104MFV, RN1105MFV, RN1106MFV  
Switching, Inverter Circuit, Interface Circuit and  
Driver Circuit Applications  
Unit: mm  
1.2 ± 0.05  
z Ultra-small package, suited to very high density mounting  
0.80 ± 0.05  
z Incorporating a bias resistor into the transistor reduces the number of parts,  
so enabling the manufacture of ever more compact equipment and  
lowering assembly cost.  
1
z A wide range of resistor values is available for use in various circuits.  
z Complementary to the RN2101MFV to RN2106MFV  
3
2
Equivalent Circuit and Bias Resistor Values  
Type No.  
R1 (kΩ)  
R2 (kΩ)  
RN1101MFV  
RN1102MFV  
RN1103MFV  
RN1104MFV  
RN1105MFV  
RN1106MFV  
4.7  
10  
4.7  
10  
22  
47  
47  
47  
22  
1. BASE  
47  
2. EMITTER  
3. COLLECTOR  
2.2  
4.7  
VESM  
JEDEC  
JEITA  
―
―
2-1L1A  
TOSHIBA  
Weight: 1.5 mg (typ.)  
Absolute Maximum Ratings (Ta = 25°C)  
Characteristic  
Symbol  
Rating  
Unit  
Collector-base voltage  
V
V
50  
50  
V
V
CBO  
CEO  
RN1101MFV to 1106MFV  
Collector-emitter voltage  
RN1101MFV to 1104MFV  
Emitter-base voltage  
10  
V
V
EBO  
RN1105MFV, 1106MFV  
5
Collector current  
I
100  
mA  
mW  
°C  
C
Collector power dissipation  
RN1101MFV to 1106MFV  
Junction temperature  
P (Note 1)  
150  
C
T
150  
j
Storage temperature range  
T
stg  
−55 to 150  
°C  
Note:Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant  
change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the  
operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings.  
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook  
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report  
and estimated failure rate, etc).  
Note 1: Mounted on an FR4 board (25.4 mm × 25.4 mm × 1.6 mm)  
0.5  
Pad Dimension（Reference）  
Unit: mm  
0.45  
1.15  
0.4  
0.45  
Start of commercial production  
2005-02  
0.4  
0.4  
1
2014-03-01  
RN1101MFV∼RN1106MFV  
Electrical Characteristics (Ta = 25°C)  
Test  
Circuit  
Characteristic  
Symbol  
Test Condition  
Min  
Typ.  
Max  
Unit  
I
I
V
V
= 50 V, I = 0  
―
―
―
―
―
―
―
―
―
―
―
―
―
―
―
―
100  
500  
1.52  
0.71  
0.33  
0.15  
0.145  
0.138  
―
RN1101MFV to  
CBO  
CB  
CE  
E
Collector cutoff current  
Emitter cutoff current  
―
nA  
RN1106MFV  
= 50 V, I = 0  
CEO  
B
RN1101MFV  
RN1102MFV  
RN1103MFV  
RN1104MFV  
RN1105MFV  
RN1106MFV  
RN1101MFV  
RN1102MFV  
RN1103MFV  
RN1104MFV  
RN1105MFV  
RN1106MFV  
0.82  
0.38  
0.17  
0.082  
0.078  
0.074  
30  
V
V
= 10 V, I = 0  
C
EB  
EB  
I
―
mA  
EBO  
= 5 V, I = 0  
C
50  
―
70  
―
DC current gain  
h
―
―
―
V
= 5 V, I = 10 mA  
CE C  
FE  
80  
―
80  
―
80  
―
RN1101MFV to  
RN1106MFV  
Collector-emitter  
saturation voltage  
V
I
= 5 mA, I = 0.5 mA  
C B  
―
0.1  
0.3  
V
V
CE (sat)  
1.1  
1.2  
1.3  
1.5  
0.6  
0.7  
―
―
―
―
―
―
2.0  
2.4  
3.0  
5.0  
1.1  
1.3  
RN1101MFV  
RN1102MFV  
RN1103MFV  
RN1104MFV  
RN1105MFV  
RN1106MFV  
Input voltage (ON)  
V
V
= 0.2 V, I = 5 mA  
I (ON)  
CE  
C
RN1101MFV to  
RN1104MFV  
1.0  
0.5  
―
―
―
1.5  
0.8  
―
Input voltage (OFF)  
V
―
―
V
V
= 5 V, I = 0.1 mA  
C
V
I (OFF)  
CE  
CB  
RN1105MFV,  
RN1106MFV  
RN1101MFV to  
RN1106MFV  
= 10 V, I = 0,  
Collector output  
capacitance  
E
C
ob  
0.7  
pF  
f = 1 MH  
z
3.29  
7
4.7  
10  
6.11  
13  
RN1101MFV  
RN1102MFV  
RN1103MFV  
RN1104MFV  
RN1105MFV  
RN1106MFV  
15.4  
32.9  
1.54  
3.29  
22  
28.6  
61.1  
2.86  
6.11  
Input resistor  
R1  
―
―
―
―
kΩ  
47  
2.2  
4.7  
RN1101MFV to  
RN1104MFV  
0.8  
1.0  
1.2  
Resistor ratio  
R1/R2  
RN1105MFV  
RN1106MFV  
0.0376 0.0468 0.0562  
0.08 0.1 0.12  
2
2014-03-01  
RN1101MFV∼RN1106MFV  
RN1101MFV  
RN1102MFV  
COMMON EMITTER  
VCE = 0.2V  
INPUT VOLTAGE VI (ON) (V)  
RN1103MFV  
RN1104MFV  
RN1105MFV  
RN1106MFV  
3
2014-03-01  
RN1101MFV∼RN1106MFV  
RN1101MFV  
RN1102MFV  
RN1103MFV  
RN1104MFV  
RN1105MFV  
RN1106MFV  
4
2014-03-01  
RN1101MFV∼RN1106MFV  
RN1102MFV  
RN1101MFV  
RN1103MFV  
RN1104MFV  
RN1105MFV  
RN1106MFV  
5
2014-03-01  
RN1101MFV∼RN1106MFV  
RN1101MFV  
RN1102MFV  
RN1104MFV  
RN1103MFV  
RN1105MFV  
RN1106MFV  
6
2014-03-01  
RN1101MFV∼RN1106MFV  
Type Name  
Marking  
RN1101MFV  
XA  
RN1102MFV  
RN1103MFV  
RN1104MFV  
RN1105MFV  
RN1106MFV  
XB  
XC  
XD  
XE  
XF  
7
2014-03-01  
RN1101MFV∼RN1106MFV  
RESTRICTIONS ON PRODUCT USE  
•
•
•
Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information  
in this document, and related hardware, software and systems (collectively "Product") without notice.  
This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with  
TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission.  
Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are  
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and  
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily  
injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the  
Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of  
all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes  
for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the  
instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their  
own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such  
design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts,  
diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating  
parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR  
APPLICATIONS.  
•
PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE  
EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH  
MAY CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT  
("UNINTENDED USE"). Except for specific applications as expressly stated in this document, Unintended Use includes, without  
limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for  
automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions,  
safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. IF YOU USE  
PRODUCT FOR UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT. For details, please contact your  
TOSHIBA sales representative.  
•
•
Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.  
Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any  
applicable laws or regulations.  
•
•
The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any  
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to  
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.  
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE  
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY  
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR  
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND  
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO  
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS  
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.  
•
•
Do not use or otherwise make available Product or related software or technology for any military purposes, including without  
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile  
technology products (mass destruction weapons). Product and related software and technology may be controlled under the  
applicable export laws and regulations including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the  
U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited  
except in compliance with all applicable export laws and regulations.  
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.  
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,  
including without limitation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES  
OCCURRING AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.  
8
2014-03-01  

相关型号：

RN1106MFV(TL3PAV)

 Small Signal Bipolar Transistor, 0.1A I(C), 50V V(BR)CEO, 1-Element, NPN, Silicon
TOSHIBA

RN1106MFV(TPL3)

 Digital Transistors 100mA 50volts 3Pin 4.7K x 47Kohms
TOSHIBA

RN1107

 Switching, Inverter Circuit, Interface Circuit And Driver Circuit Applications
TOSHIBA

RN1107(T5L,F,T)

 Small Signal Bipolar Transistor
TOSHIBA

RN1107(TE85R)

 TRANSISTOR 100 mA, 50 V, NPN, Si, SMALL SIGNAL TRANSISTOR, SSM, 2-2H1A, 3 PIN, BIP General Purpose Small Signal
TOSHIBA

RN1107ACT

 Switching, Inverter Circuit, Interface Circuit and Driver Circuit Applications
TOSHIBA

RN1107CT

 Switching Applications Inverter Circuit Applications Interface Circuit Applications Driver Circuit Applications
TOSHIBA

RN1107F

 TRANSISTOR | 50V V(BR)CEO | 100MA I(C) | SOT-416
ETC

RN1107FS

 Switching, Inverter Circuit, Interface Circuit and Driver Circuit Applications
TOSHIBA

RN1107FV

 TRANSISTOR 100 mA, 50 V, NPN, Si, SMALL SIGNAL TRANSISTOR, 2-1E1A, VESM, 3 PIN, BIP General Purpose Small Signal
TOSHIBA

RN1107MFV

 TRANSISTOR 100 mA, 50 V, NPN, Si, SMALL SIGNAL TRANSISTOR, ULTRA SMALL, VESM, 2-1L1A, 3 PIN, BIP General Purpose Small Signal
TOSHIBA

RN1107MFV(TL3MAA)

 Small Signal Bipolar Transistor, 0.1A I(C), 50V V(BR)CEO, 1-Element, NPN, Silicon
TOSHIBA
©2020 ICPDF网 联系我们和版权申明