RN2108CT [TOSHIBA]
Switching Applications Inverter Circuit Applications Interface Circuit Applications Driver Circuit Applications; 开关应用逆变电路应用接口电路应用驱动器电路应用
| 型号： | RN2108CT |
| 厂家： | 
TOSHIBA |
| 描述： | Switching Applications Inverter Circuit Applications Interface Circuit Applications Driver Circuit Applications |
| 文件： | 总6页 (文件大小：151K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
RN2107CT ~ RN2109CT
TOSHIBA Transistor Silicon PNP Epitaxial Type (PCT process) (Bias Resistor built-in Transistor)
RN2107CT,RN2108CT,RN2109CT
Switching Applications
Inverter Circuit Applications
Interface Circuit Applications
Unit: mm
Top View
0.6±0.05
0.5±0.03
Driver Circuit Applications
• Incorporating a bias resistor into a transistor reduces parts count.
３
• Reducing the parts count enable the manufacture of ever more
compact equipment and save assembly cost.
１
２
• Complementary to RN1107CT to RN1109CT
0.05±0.03
0.35±0.02
0.15±0.03
Equivalent Circuit and Bias Resistor Values
C
1.BASE
2.EMITTER
3.COLLECOTR
Type No.
R1 (kΩ)
R2 (kΩ)
CST3
RN2107CT
RN2108CT
RN2109CT
10
22
47
47
47
22
R1
B
JEDEC
JEITA
―
―
TOSHIBA
2-1J1A
E
Weight: 0.75 mg (typ.)
Absolute Maximum Ratings (Ta = 25°C)
Characteristics
Collector-base voltage
Symbol
Rating
Unit
RN2107CT
to
RN2109CT
V
V
−20
−20
V
V
CBO
CEO
Collector-emitter voltage
RN2107CT
RN2108CT
RN2109CT
−6
−7
Emitter-base voltage
V
V
EBO
−15
Collector current
I
−50
mA
mW
°C
C
RN2107CT
to
RN2109CT
Collector power dissipation
Junction temperature
Storage temperature range
P
50
C
T
150
j
T
stg
−55 to 150
°C
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if
the operating conditions (i.e.operatingtemperature/current/voltage, etc.) are within the absolute maximum ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report
and estimated failure rate, etc).
1
2010-08-20
RN2107CT ~ RN2109CT
Electrical Characteristics (Ta = 25°C)
Characteristics
Symbol
Test Condition
= −20 V, I = 0
Min
Typ.
Max
Unit
nA
I
I
V
V
V
V
V
⎯
⎯
⎯
⎯
⎯
⎯
⎯
−100
−500
CBO
CEO
CB
CE
EB
EB
EB
E
Collector cut-off current
Emitter cut-off current
RN2107CT to 2109CT
= −20 V, I = 0
⎯
B
RN2107CT
RN2108CT
RN2109CT
RN2107CT
= −6 V, I = 0
−0.088
−0.085
−0.182
120
−0.131
−0.126
−0.271
⎯
C
I
mA
= −7 V, I = 0
EBO
C
= −15 V, I = 0
C
V
= −5 V,
CE
RN2108CT
RN2109CT
120
100
DC current gain
h
⎯
V
⎯
⎯
⎯
⎯
FE
I
= −10 mA
C
Collector-emitter
saturation voltage
I
I
= −5 mA,
= −0.25 mA
C
B
RN2107CT to 2109CT
V
CE (sat)
−0.15
⎯
⎯
RN2107CT
RN2108CT
RN2109CT
RN2107CT
RN2108CT
RN2109CT
−0.7
−0.8
−1.6
−0.5
−0.6
−1.3
−1.5
−2.2
−5.0
−1.0
−1.1
−2.6
⎯
⎯
⎯
⎯
⎯
⎯
1.2
V
= −0.2 V,
CE
Input voltage (ON)
Input voltage (OFF)
V
V
I (ON)
I
= −5 mA
C
V
= −5 V,
CE
= −0.1 mA,
V
V
I (OFF)
I
C
Collector output
capacitance
V
= −10 V, I = 0,
E
CB
f = 1 MHz
RN2107CT to 2109CT
C
pF
kΩ
ob
⎯
⎯
RN2107CT
RN2108CT
RN2109CT
RN2107CT
RN2108CT
RN2109CT
8
10
22
12
Input resistor
Resistor ratio
R1
⎯
⎯
17.6
37.6
0.17
0.37
1.71
26.4
56.4
0.26
0.56
2.56
47
0.21
0.47
2.14
R1/R2
⎯
2
2010-08-20
RN2107CT ~ RN2109CT
RN2107CT
RN2107CT
IC - VI(ON)
IC - VI(OFF)
-100
-10
-1
-10000
-1000
-100
Ta=100°C
Ta=100°C
25
-25
25
-25
EMITTER COMMON
VCE= -0.2V
EMITTER COMMON
VCE= -5V
-0.1
-10
-0.1
-1
-10
-100
-100
-100
-0.2
-0.4
-0.6
-0.8
-1
-1.2
-1.4
INPUT VOLTAGEꢀVI(ON) ( V)
INPUT VOLTAGEꢀVI(OFF) ( V)
RN2108CT
RN2108CT
IC - VI(ON)
IC - VI(OFF)
-100
-10
-1
-10000
-1000
-100
EMITTER COMMON
VCE= -5V
25
Ta=100°C
Ta=100°C
-25
25
-25
EMITTER COMMON
VCE= -0.2V
-0.1
-10
-0.1
-1
-10
-0.2 -0.4 -0.6 -0.8
-1
-1.2 -1.4 -1.6
INPUT VOLTAGEꢀVI(ON) ( V)
INPUT VOLTAGEꢀVI(OFF) ( V)
RN2109CT
RN2109CT
IC - VI(ON)
IC - VI(OFF)
-100
-10
-1
-10000
-1000
-100
EMITTER COMMON
VCE= -5V
EMITTER COMMON
VCE= -0.2V
Ta=100°C
25
-25
25
Ta=100°C
-25
-10
-0.1
-0.6
-1
-1.4
-1.8
-2.2
-2.6
-3
-0.1
-1
-10
INPUT VOLTAGEꢀVI(ON) ( V)
INPUT VOLTAGEꢀVI(OFF) ( V)
3
2010-08-20
RN2107CT ~ RN2109CT
RN2107CT
RN2107CT
hFE - IC
VCE(sat) - IC
1000
-1000
EMITTER COMMON
IC / IB=20
Ta=100°C
25
-25
100
-100
Ta=100°C
25
EMITTER COMMON
VCE= -5V
-25
10
-10
-1
-1
-1
-10
COLLECTOR CURRENTꢀIC (mA)
-100
-1
-10
COLLECTOR CURRENTꢀIC (mA)
-100
RN2108CT
RN2108CT
hFE - IC
VCE(sat) - IC
1000
-1000
EMITTER COMMON
IC / IB=20
Ta=100°C
25
Ta=100°C
-25
100
-100
25
EMITTER COMMON
VCE= -5V
-25
10
-10
-10
COLLECTOR CURRENTꢀIC (mA)
-100
-1
-10
COLLECTOR CURRENT IC (mA)
-100
RN2109CT
hFE - IC
RN2109CT
VCE(sat) - IC
1000
-1000
EMITTER COMMON
IC / IB=20
Ta=100°C
Ta=100°C
25
100
-100
-25
25
-25
EMITTER COMMON
VCE= -5V
10
-10
-10
COLLECTOR CURRENTꢀIC (mA)
-100
-1
-10
COLLECTOR CURRENTꢀIC (mA)
-100
4
2010-08-20
RN2107CT ~ RN2109CT
Type Name
RN2107CT
Marking
Type name
1
2
U6
3
Type name
1
2
RN2108CT
U7
3
Type name
1
2
RN2109CT
U8
3
Handling Precaution
When handling individual devices (which are not yet mounted on a circuit board), be sure that the environment is
protected against electrostatic electricity. Operators should wear anti-static clothing, and containers and other objects that
come into direct contact with devices should be made of anti-static materials.
5
2010-08-20
RN2107CT ~ RN2109CT
RESTRICTIONS ON PRODUCT USE
•
•
•
Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively “Product”) without notice.
This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.
Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the Product,
or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of all
relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for
Product and the precautions and conditions set forth in the “TOSHIBA Semiconductor Reliability Handbook” and (b) the instructions for
the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their own product
design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or
applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams,
programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for
such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR APPLICATIONS.
•
Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring
equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.
Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or
reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious public
impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used in the
aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling
equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric
power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this
document.
•
•
Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
•
•
The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
•
•
Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation,
for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology
products (mass destruction weapons). Product and related software and technology may be controlled under the Japanese Foreign
Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product or related software
or technology are strictly prohibited except in compliance with all applicable export laws and regulations.
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of
noncompliance with applicable laws and regulations.
6
2010-08-20
相关型号：
RN2108FS
TRANSISTOR 50 mA, 20 V, NPN, Si, SMALL SIGNAL TRANSISTOR, FSM, 2-1E1A, 3 PIN, BIP General Purpose Small Signal
TOSHIBA
RN2108FV
TRANSISTOR 100 mA, 50 V, PNP, Si, SMALL SIGNAL TRANSISTOR, 2-1L1A, VESM, 3 PIN, BIP General Purpose Small Signal
TOSHIBA
RN2108MFV(TL3PAV)
Small Signal Bipolar Transistor, 0.1A I(C), 50V V(BR)CEO, 1-Element, PNP, Silicon
TOSHIBA
©2020 ICPDF网 联系我们和版权申明