RN2973FS [TOSHIBA]
Switching, Inverter Circuit, Interface Circuit and Driver Circuit Applications; 开关,逆变电路,接口电路及驱动电路的应用型号: | RN2973FS |
厂家: | TOSHIBA |
描述: | Switching, Inverter Circuit, Interface Circuit and Driver Circuit Applications |
文件: | 总5页 (文件大小:122K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
RN2972FS,RN2973FS
TOSHIBA Transistor Silicon PNP Epitaxial Type (PCT process) (Bias Resistor Built-in Transistor)
RN2972FS,RN2973FS
Switching, Inverter Circuit, Interface Circuit and
Driver Circuit Applications
Unit: mm
•
•
Two devices are incorporated into a fine pitch small mold (6-pin)
package.
1.0±0.05
0.8±0.05
0.1±0.05
0.1±0.05
Incorporating a bias resistor into a transistor reduces parts count.
Reducing the parts count enables the manufacture of ever more
compact equipment and lowers assembly cost.
Complementary to RN1972FS, RN1973FS
1
6
5
•
2
4
3
Equivalent Circuit and Bias Resistor Values
C
R1
B
1.EMIITTER1
2.EMITTER2
3.BASE2
4.COLLECTOR2
5.BASE1
(E1)
(E2)
(B2)
(C2)
(B1)
(C1)
E
6.COLLECTOR1
fS6
Absolute Maximum Ratings (Ta = 25°C)
(Q1, Q2 common)
JEDEC
JEITA
―
―
Characteristics
Symbol
Rating
−20
Unit
V
Collector-base voltage
V
CBO
V
CEO
V
EBO
TOSHIBA
2-1F1C
Collector-emitter voltage
Emitter-base voltage
−20
V
Weight: 0.001g (typ.)
−5
V
Equivalent Circuit
(top view)
Collector current
I
−50
mA
mW
°C
°C
C
Collector power dissipation
Junction temperature
Storage temperature range
P
(Note 1)
50
6
5
4
C
T
150
j
T
stg
−55~150
Q2
Q1
Note: Using continuously under heavy loads (e.g. the application of high
temperature/current/voltage and the significant change in temperature, etc.)
may cause this product to decrease in the reliability significantly even if the
operating conditions (i.e. operating temperature/current/voltage, etc.) are
within the absolute maximum ratings.
1
2
3
Please design the appropriate reliability upon reviewing the Toshiba
Semiconductor Reliability Handbook (“Handling Precautions”/“Derating
Concept and Methods”) and individual reliability data (i.e. reliability test report
and estimated failure rate, etc).
Note 1: Total rating
Electrical Characteristics (Ta = 25°C) (Q1, Q2 common)
Characteristics
Collector cut-off current
Symbol
Test Condition
= −20 V, I = 0
Min
Typ.
Max
Unit
I
V
V
V
⎯
⎯
⎯
⎯
⎯
−100
−100
⎯
nA
nA
CBO
CB
EB
CE
E
Emitter cut-off current
I
= −5 V, I = 0
C
EBO
DC current gain
h
= −5 V, I = −1 mA
300
⎯
FE
CE (sat)
C
Collector-emitter saturation voltage
Collector output capacitance
V
I
= −5 mA, I = −0.25 mA
−0.15
⎯
V
C
B
C
V
= −10 V, I = 0, f = 1 MHz
⎯
1.2
22
47
pF
ob
CB
E
RN2972FS
RN2973FS
17.6
37.6
26.4
56.4
Input resistor
R1
⎯
kΩ
1
2007-11-01
RN2972FS,RN2973FS
Q1, Q2 Common
IC - VI(ON)
IC - VI(OFF)
RN2972FS
-100
RN2972FS
-10000
-1000
-100
Ta=100°C
-10
-1
Ta=100°C
25
-25
25
-25
EMITTER COMMON
VCE=-0.2V
EMITTER COMMON
VCE=-5V
-0.1
-10
-0.1
-1
-10
-100
0
-0.2 -0.4 -0.6 -0.8
-1
-1.2 -1.4
INPUT ON VOLTAGE VI(ON) ( V)
INPUT OFF VOLTAGE VI(OFF) ( V)
IC - VI(ON)
IC - VI(OFF)
RN2973FS
RN2973FS
-100
-10
-1
-10000
-1000
-100
Ta=100°C
Ta=100°C
-25
25
25
-25
EMITTER COMMON
VCE=-0.2V
EMITTER COMMON
VCE=-5V
-0.1
-10
-0.1
-1
-10
-100
0
-0.2 -0.4 -0.6 -0.8
-1
-1.2 -1.4
INPUT ON VOLTAGE VI(ON) ( V)
INPUT OFF VOLTAGE VI(OFF) ( V)
2
2007-11-01
RN2972FS,RN2973FS
Q1, Q2 Common
hFE - IC
RN2972FS
VCE(sat) - IC
RN2972FS
10000
-1000
-100
-10
Ta=100°C
1000
100
Ta=100°C
25
-25
25
-25
EMITTER COMMON
IC/IB=20
EMITTER COMMON
VCE=-5V
10
-1
-0.1
-1
-10
-100
-0.1
-1
-10
-100
COLLECTOR CURRENT IC (mA)
COLLECTOR CURRENT IC (mA)
hFE - IC
VCE(sat) - IC
RN2973FS
RN2973FS
10000
1000
100
-1000
Ta=100°C
-100
-10
-1
Ta=100°C
25
-25
25
-25
EMITTER COMMON
VCE=-5V
EMITTER COMMON
IC/IB=20
10
-0.1
-1
-10
-100
-0.1
-1
-10
-100
COLLECTOR CURRENT IC (mA)
COLLECTOR CURRENT IC (mA)
3
2007-11-01
RN2972FS,RN2973FS
Type Name
RN2972FS
Marking
4
6
1
5
Type name
KH
2
5
3
6
4
Type name
RN2973FS
KJ
2
3
1
Handling Precaution
When handling individual devices (which are not yet mounted on a circuit board), be sure that the environment is
protected against electrostatic discharge. Operators should wear anti-static clothing, and containers and other objects
that come into direct contact with devices should be made of anti-static materials.
4
2007-11-01
RN2972FS,RN2973FS
RESTRICTIONS ON PRODUCT USE
•
•
•
Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively “Product”) without notice.
This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.
Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before creating and producing designs and using, customers must
also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document,
the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the “TOSHIBA
Semiconductor Reliability Handbook” and (b) the instructions for the application that Product will be used with or for. Customers are
solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the
appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any
information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other
referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO
LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR APPLICATIONS.
•
Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring
equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.
Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or
reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious
public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used
in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling
equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric
power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this
document.
•
•
Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
•
•
The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
•
•
Do not use or otherwise make available Product or related software or technology for any military purposes, including without
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile
technology products (mass destruction weapons). Product and related software and technology may be controlled under the
Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product
or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of
noncompliance with applicable laws and regulations.
5
2007-11-01
相关型号:
RN2975
TRANSISTOR 100 mA, 50 V, 2 CHANNEL, PNP, Si, SMALL SIGNAL TRANSISTOR, ULTRA SUPERMINI, US6, 2-2J1B, 6 PIN, BIP General Purpose Small Signal
TOSHIBA
RN2A155M05011PB
Aluminum Electrolytic Capacitor, Non-polarized, Aluminum (wet), 100V, 20% +Tol, 20% -Tol, 1.5uF, Through Hole Mount, RADIAL LEADED, ROHS COMPLIANT
SAMWHA
RN2A225M05011PA
Aluminum Electrolytic Capacitor, Non-polarized, Aluminum (wet), 100V, 20% +Tol, 20% -Tol, 2.2uF, Through Hole Mount, RADIAL LEADED, ROHS COMPLIANT
SAMWHA
©2020 ICPDF网 联系我们和版权申明