TA79L15F(TE12L) [TOSHIBA]
IC,VOLT REGULATOR,FIXED,-15V,BIPOLAR,TO-243,3PIN,PLASTIC;型号: | TA79L15F(TE12L) |
厂家: | TOSHIBA |
描述: | IC,VOLT REGULATOR,FIXED,-15V,BIPOLAR,TO-243,3PIN,PLASTIC |
文件: | 总17页 (文件大小:411K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
TA79L05,06,08,09,10,12,15,18,20,24F
TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic
TA79L05F,TA79L06F,TA79L08F,TA79L09F,TA79L10F,
TA79L12F,TA79L15F,TA79L18F,TA79L20F,TA79L24F
Three-Terminal Negative Voltage Regulators
−5 V, −6 V, −8 V, −9 V, −10 V, −12 V, −15 V, −18 V, −20 V, −24 V
Features
2
Best suited to a power supply for TTL and C MOS.
z Built-in overcurrent protection.
z Built-in overheating protection.
z Maximum output current of 150 mA (T = 25°C).
j
z Packaged in Power Mini. (SOT-89).
Pin Assignment
Marking side
Weight: 0.05 g (Typ.)
1
2
3
GND
IN
OUT
(CASE)
Marking
Part No.
(or abbreviation code)
Part No.
Part No. (or abbreviation code) *1
AJ
BJ
CJ
DJ
EJ
FJ
GJ
HJ
IJ
TA79L05F
TA79L06F
TA79L08F
TA79L09F
TA79L10F
TA79L12F
TA79L15F
TA79L18F
TA79L20F
TA79L24F
A J
Note
*1
Lot No.
(weekly code)
JJ
Note: A line beside a Lot No. identifies the indication of product Labels.
Without a line: [[Pb]]/INCLUDES > MCV
With a line: [[G]]/RoHS COMPATIBLE or [[G]]/RoHS [[Pb]]
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS
compatibility of Product. The RoHS is the Directive 2002/95/EC of the European Parliament and of the Council of 27
January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
The product(s) in this document (“Product”) contain functions intended to protect the Product from temporary
small overloads such as minor short-term overcurrent or overheating. The protective functions do not
necessarily protect Product under all circumstances. When incorporating Product into your system, please
design the system (1) to avoid such overloads upon the Product, and (2) to shut down or otherwise relieve
the Product of such overload conditions immediately upon occurrence. For details, please refer to the notes
appearing below in this document and other documents referenced in this document.
1
2009-09-30
TA79L05,06,08,09,10,12,15,18,20,24F
Equivalent Circuit
①
③
②
Absolute Maximum Ratings (Ta = 25°C)
Characteristics
Symbol
Rating
Unit
Type No.
Marking
TA79L05F
TA79L06F
TA79L08F
TA79L09F
TA79L10F
TA79L12F
TA79L15F
TA79L18F
TA79L20F
TA79L24F
TA79L05F
TA79L06F
TA79L08F
TA79L09F
TA79L10F
TA79L12F
TA79L15F
TA79L18F
TA79L20F
TA79L24F
AJ
BJ
CJ
DJ
EJ
FJ
GJ
HJ
IJ
−35
Input voltage
V
V
IN
−40
JJ
Output current
I
0.15
500
A
mW
°C
OUT
Power dissipation
Operating temperature
Storage temperature
Junction temperature
Thermal resistance
(Ta = 25°C)
P
D
T
−30 to 85
−55 to 150
150
opr
T
°C
stg
T
j
°C
R
250
°C/W
th (j-a)
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings and the operating ranges.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
2
2009-09-30
TA79L05,06,08,09,10,12,15,18,20,24F
TA79L05F
Electrical Characteristics
(Unless otherwise specified, VIN = −10 V, IOUT = 40 mA, CIN = 0.33 μF, COUT = 0.1 μF,
0°C ≤ Tj ≤ 125°C)
Test
Circuit
Characteristics
Output voltage
Symbol
Test Condition
Min
Typ.
Max
Unit
V
V
1
T = 25°C
−5.2
―
−5.0
55
−4.8
150
100
100
50
OUT
j
−20 V ≤ V ≤ −7.0 V
IN
Line regulation
Load regulation
Reg·line
Reg·load
1
1
T = 25°C
j
mV
mV
−20 V ≤ V ≤ −8.0 V
IN
―
45
1.0 mA ≤ I
1.0 mA ≤ I
≤ 100 mA
≤ 40 mA
―
11
OUT
OUT
T = 25°C
j
―
5.0
−20 V ≤ V ≤ −7.0 V,
IN
−5.25
―
−4.75
1.0 mA ≤ I
≤ 40 mA
OUT
Output voltage
V
1
1
T = 25°C
V
OUT
j
1.0 mA ≤ I
≤ 70 mA
−5.25
―
―
3.1
―
−4.75
6.0
5.5
1.5
0.1
―
OUT
T = 25°C
j
Quiescent current
I
mA
mA
B
T = 125°C
j
―
ΔI
1
1
2
1
−20 V ≤ V ≤ −8.0 V
IN
―
―
BI
BO
NO
Quiescent current change
T = 25°C
j
ΔI
1.0 mA ≤ I
≤ 40 mA
―
―
OUT
Output noise voltage
Long term stability
V
Ta = 25°C, 10 Hz ≤ f ≤ 100 kHz
―
40
12
μV
rms
ΔV
/Δt
OUT
―
―
―
mV/kh
dB
−18 V ≤ V ≤ −8.0 V,
IN
T = 25°C, f = 120 Hz
j
Ripple rejection ratio
Dropout voltage
R.R.
3
1
1
41
―
―
49
1.7
0.6
―
―
―
V
T = 25°C
j
V
D
Average temperature
coefficient of output voltage
T
CVO
I
= 5 mA
OUT
mV/°C
3
2009-09-30
TA79L05,06,08,09,10,12,15,18,20,24F
TA79L06F
Electrical Characteristics
(Unless otherwise specified, VIN = −11 V, IOUT = 40 mA, CIN = 0.33 μF, COUT = 0.1 μF,
0°C ≤ Tj ≤ 125°C)
Test
Circuit
Characteristics
Output voltage
Symbol
Test Condition
Min
Typ.
Max
Unit
V
V
1
T = 25°C
−6.24
―
−6.0
50
−5.76
150
110
120
60
OUT
j
−21 V ≤ V ≤ −8.1 V
IN
Line regulation
Load regulation
Reg·line
Reg·load
1
1
T = 25°C
j
mV
mV
−21 V ≤ V ≤ −9.0 V
IN
―
45
1.0 mA ≤ I
1.0 mA ≤ I
≤ 100 mA
≤ 40 mA
―
12
OUT
OUT
T = 25°C
j
―
5.5
−21 V ≤ V ≤ −8.1 V,
IN
−6.3
―
−5.7
1.0 mA ≤ I
≤ 40 mA
OUT
Output voltage
V
1
1
T = 25°C
V
OUT
j
1.0 mA ≤ I
≤ 70 mA
−6.3
―
―
3.1
―
−5.7
6.0
5.5
1.5
0.1
―
OUT
T = 25°C
j
Quiescent current
I
mA
mA
B
T = 125°C
j
―
ΔI
1
1
2
1
−20 V ≤ V ≤ −9.0 V
IN
―
―
BI
BO
NO
Quiescent current change
T = 25°C
j
ΔI
1.0 mA ≤ I
≤ 40 mA
―
―
OUT
Output noise voltage
Long term stability
V
Ta = 25°C, 10 Hz ≤ f ≤ 100 kHz
―
40
14
μV
rms
ΔV
/Δt
OUT
―
―
―
mV/kh
dB
−19 V ≤ V ≤ −9.0 V,
IN
T = 25°C, f = 120 Hz
j
Ripple rejection ratio
Dropout voltage
R.R.
3
1
1
39
―
―
47
1.7
0.7
―
―
―
V
T = 25°C
j
V
D
Average temperature
coefficient of output voltage
T
CVO
I
= 5 mA
OUT
mV/°C
4
2009-09-30
TA79L05,06,08,09,10,12,15,18,20,24F
TA79L08F
Electrical Characteristics
(Unless otherwise specified, VIN = −14 V, IOUT = 40 mA, CIN = 0.33 μF, COUT = 0.1 μF,
0°C ≤ Tj ≤ 125°C)
Test
Circuit
Characteristics
Output voltage
Symbol
Test Condition
Min
Typ.
Max
Unit
V
V
1
T = 25°C
−8.3
―
−8.0
20
−7.7
175
125
155
75
OUT
j
−23 V ≤ V ≤ −10.5 V
IN
Line regulation
Load regulation
Reg·line
Reg·load
1
1
T = 25°C
j
mV
mV
−23 V ≤ V ≤ −11 V
IN
―
12
1.0 mA ≤ I
1.0 mA ≤ I
≤ 100 mA
≤ 40 mA
―
15
OUT
OUT
T = 25°C
j
―
7.0
−23 V ≤ V ≤ −10.5 V,
IN
−8.4
―
−7.6
1.0 mA ≤ I
≤ 40 mA
OUT
Output voltage
V
1
1
T = 25°C
V
OUT
j
1.0 mA ≤ I
≤ 70 mA
−8.4
―
―
3.1
―
−7.6
6.5
6.0
1.5
0.1
―
OUT
T = 25°C
j
Quiescent current
I
mA
mA
B
T = 125°C
j
―
ΔI
1
1
2
1
−23 V ≤ V ≤ −11 V
IN
―
―
BI
BO
NO
Quiescent current change
T = 25°C
j
ΔI
1.0 mA ≤ I
≤ 40 mA
―
―
OUT
Output noise voltage
Long term stability
V
Ta = 25°C, 10 Hz ≤ f ≤ 100 kHz
―
60
20
μV
rms
ΔV
/Δt
OUT
―
―
―
mV/kh
dB
−23 V ≤ V ≤ −12 V,
IN
T = 25°C, f = 120 Hz
j
Ripple rejection ratio
Dropout voltage
R.R.
3
1
1
37
―
―
45
1.7
0.8
―
―
―
V
T = 25°C
j
V
D
Average temperature
coefficient of output voltage
T
CVO
I
= 5 mA
OUT
mV/°C
5
2009-09-30
TA79L05,06,08,09,10,12,15,18,20,24F
TA79L09F
Electrical Characteristics
(Unless otherwise specified, VIN = −15 V, IOUT = 40 mA, CIN = 0.33 μF, COUT = 0.1 μF,
0°C ≤ Tj ≤ 125°C)
Test
Circuit
Characteristics
Output voltage
Symbol
Test Condition
Min
Typ.
Max
Unit
V
V
1
T = 25°C
−9.36
―
−9.0
80
−8.64
200
160
175
80
OUT
j
−24 V ≤ V ≤ −11.4 V
IN
Line regulation
Load regulation
Reg·line
Reg·load
1
1
T = 25°C
j
mV
mV
−24 V ≤ V ≤ −12 V
IN
―
20
1.0 mA ≤ I
1.0 mA ≤ I
≤ 100 mA
≤ 40 mA
―
17
OUT
OUT
T = 25°C
j
―
8.0
−24 V ≤ V ≤ −11.4 V,
IN
−9.45
―
−8.55
1.0 mA ≤ I
≤ 40 mA
OUT
Output voltage
V
1
1
T = 25°C
V
OUT
j
1.0 mA ≤ I
≤ 70 mA
−9.45
―
―
3.2
―
−8.55
6.5
6.0
1.5
0.1
―
OUT
T = 25°C
j
Quiescent current
I
mA
mA
B
T = 125°C
j
―
ΔI
1
1
2
1
−24 V ≤ V ≤ −12 V
IN
―
―
BI
BO
NO
Quiescent current change
T = 25°C
j
ΔI
1.0 mA ≤ I
≤ 40 mA
―
―
OUT
Output noise voltage
Long term stability
V
Ta = 25°C, 10 Hz ≤ f ≤ 100 kHz
―
65
21
μV
rms
ΔV
/Δt
OUT
―
―
―
mV/kh
dB
−24 V ≤ V ≤ −12 V,
IN
T = 25°C, f = 120 Hz
j
Ripple rejection ratio
Dropout voltage
R.R.
3
1
1
36
―
―
44
1.7
―
―
―
V
T = 25°C
j
V
D
Average temperature
coefficient of output voltage
T
CVO
I
= 5 mA
OUT
0.85
mV/°C
6
2009-09-30
TA79L05,06,08,09,10,12,15,18,20,24F
TA79L10F
Electrical Characteristics
(Unless otherwise specified, VIN = −16 V, IOUT = 40 mA, CIN = 0.33 μF, COUT = 0.1 μF,
0°C ≤ Tj ≤ 125°C)
Test
Circuit
Characteristics
Output voltage
Symbol
Test Condition
Min
Typ.
Max
Unit
V
V
1
T = 25°C
−10.4 −10.0
−9.6
230
170
190
90
OUT
j
−25 V ≤ V ≤ −12.5 V
IN
―
―
―
―
80
30
18
8.5
Line regulation
Load regulation
Reg·line
Reg·load
1
1
T = 25°C
j
mV
mV
−25 V ≤ V ≤ −13 V
IN
1.0 mA ≤ I
1.0 mA ≤ I
≤ 100 mA
≤ 40 mA
OUT
OUT
T = 25°C
j
−25 V ≤ V ≤ −12.5 V,
IN
−10.5
―
−9.5
1.0 mA ≤ I
≤ 40 mA
OUT
Output voltage
V
1
1
T = 25°C
V
OUT
j
1.0 mA ≤ I
≤ 70 mA
−10.5
―
―
3.2
―
−9.5
6.5
6.0
1.5
0.1
―
OUT
T = 25°C
j
Quiescent current
I
mA
mA
B
T = 125°C
j
―
ΔI
1
1
2
1
−25 V ≤ V ≤ −13 V
IN
―
―
BI
BO
NO
Quiescent current change
T = 25°C
j
ΔI
1.0 mA ≤ I
≤ 40 mA
―
―
OUT
Output noise voltage
Long term stability
V
Ta = 25°C, 10 Hz ≤ f ≤ 100 kHz
―
70
22
μV
rms
ΔV
/Δt
OUT
―
―
―
mV/kh
dB
−24 V ≤ V ≤ −13 V,
IN
T = 25°C, f = 120 Hz
j
Ripple rejection ratio
Dropout voltage
R.R.
3
1
1
36
―
―
43
1.7
0.9
―
―
―
V
T = 25°C
j
V
D
Average temperature
coefficient of output voltage
T
CVO
I
= 5 mA
OUT
mV/°C
7
2009-09-30
TA79L05,06,08,09,10,12,15,18,20,24F
TA79L12F
Electrical Characteristics
(Unless otherwise specified, VIN = −19 V, IOUT = 40 mA, CIN = 0.33 μF, COUT = 0.1 μF,
0°C ≤ Tj ≤ 125°C)
Test
Circuit
Characteristics
Output voltage
Symbol
Test Condition
Min
Typ.
Max
Unit
V
V
1
T = 25°C
j
−12.5 −12.0 −11.5
OUT
−27 V ≤ V ≤ −14.5 V
IN
―
―
―
―
120
100
20
250
200
225
105
Line regulation
Load regulation
Reg·line
Reg·load
1
1
T = 25°C
mV
mV
j
−27 V ≤ V ≤ −16 V
IN
1.0 mA ≤ I
1.0 mA ≤ I
≤ 100 mA
≤ 40 mA
OUT
OUT
T = 25°C
j
10
−27 V ≤ V ≤ −14.5 V,
IN
−12.6
―
−11.4
1.0 mA ≤ I
≤ 40 mA
OUT
Output voltage
V
1
1
T = 25°C
V
OUT
j
1.0 mA ≤ I
≤ 70 mA
−12.6
―
―
3.2
―
−11.4
6.5
6.0
1.5
0.1
―
OUT
T = 25°C
j
Quiescent current
I
mA
mA
B
T = 125°C
j
―
ΔI
1
1
2
1
−27 V ≤ V ≤ −16 V
IN
―
―
BI
BO
NO
Quiescent current change
T = 25°C
j
ΔI
1.0 mA ≤ I
≤ 40 mA
―
―
OUT
Output noise voltage
Long term stability
V
Ta = 25°C, 10 Hz ≤ f ≤ 100 kHz
―
80
24
μV
rms
ΔV
/Δt
OUT
―
―
―
mV/kh
dB
−25 V ≤ V ≤ −15 V,
IN
T = 25°C, f = 120 Hz
j
Ripple rejection ratio
Dropout voltage
R.R.
3
1
1
37
―
―
42
1.7
1.0
―
―
―
V
T = 25°C
j
V
D
Average temperature
coefficient of output voltage
T
CVO
I
= 5 mA
OUT
mV/°C
8
2009-09-30
TA79L05,06,08,09,10,12,15,18,20,24F
TA79L15F
Electrical Characteristics
(Unless otherwise specified, VIN = −23 V, IOUT = 40 mA, CIN = 0.33 μF, COUT = 0.1 μF,
0°C ≤ Tj ≤ 125°C)
Test
Circuit
Characteristics
Output voltage
Symbol
Test Condition
Min
Typ.
Max
Unit
V
V
1
T = 25°C
j
−15.6 −15.0 −14.4
OUT
−30 V ≤ V ≤ −17.5 V
IN
―
―
―
―
130
110
25
300
250
280
130
Line regulation
Load regulation
Reg·line
Reg·load
1
1
T = 25°C
mV
mV
j
−30 V ≤ V ≤ −20 V
IN
1.0 mA ≤ I
1.0 mA ≤ I
≤ 100 mA
≤ 40 mA
OUT
OUT
T = 25°C
j
12
−30 V ≤ V ≤ −17.5 V,
IN
−15.75
―
−14.25
1.0 mA ≤ I
≤ 40 mA
OUT
Output voltage
V
1
1
T = 25°C
V
OUT
j
1.0 mA ≤ I
≤ 70 mA
−15.75
―
―
3.3
―
−14.25
6.5
6.0
1.5
0.1
―
OUT
T = 25°C
j
Quiescent current
I
mA
mA
B
T = 125°C
j
―
ΔI
1
1
2
1
−30 V ≤ V ≤ −20 V
IN
―
―
BI
BO
NO
Quiescent current change
T = 25°C
j
ΔI
1.0 mA ≤ I
≤ 40 mA
―
―
OUT
Output noise voltage
Long term stability
V
Ta = 25°C, 10 Hz ≤ f ≤ 100 kHz
―
90
30
μV
rms
ΔV
/Δt
OUT
―
―
―
mV/kh
dB
−28.5 V ≤ V ≤ −18.5 V,
IN
T = 25°C, f = 120 Hz
j
Ripple rejection ratio
Dropout voltage
R.R.
3
1
1
34
―
―
39
1.7
1.3
―
―
―
V
T = 25°C
j
V
D
Average temperature
coefficient of output voltage
T
CVO
I
= 5 mA
OUT
mV/°C
9
2009-09-30
TA79L05,06,08,09,10,12,15,18,20,24F
TA79L18F
Electrical Characteristics
(Unless otherwise specified, VIN = −27 V, IOUT = 40 mA, CIN = 0.33 μF, COUT = 0.1 μF,
0°C ≤ Tj ≤ 125°C)
Test
Circuit
Characteristics
Output voltage
Symbol
Test Condition
Min
Typ.
Max
Unit
V
V
1
T = 25°C
j
−18.7 −18.0 −17.3
OUT
−33 V ≤ V ≤ −20.7 V
IN
―
―
―
―
32
27
30
15
325
275
335
155
Line regulation
Load regulation
Reg·line
Reg·load
1
1
T = 25°C
mV
mV
j
−33 V ≤ V ≤ −21 V
IN
1.0 mA ≤ I
1.0 mA ≤ I
≤ 100 mA
≤ 40 mA
OUT
OUT
T = 25°C
j
−33 V ≤ V ≤ −20.9 V,
IN
−18.9
―
−17.1
1.0 mA ≤ I
≤ 40 mA
OUT
Output voltage
V
1
1
T = 25°C
V
OUT
j
1.0 mA ≤ I
≤ 70 mA
−18.9
―
―
3.3
―
−17.1
6.5
6.0
1.5
0.1
―
OUT
T = 25°C
j
Quiescent current
I
mA
mA
B
T = 125°C
j
―
ΔI
1
1
2
1
−33 V ≤ V ≤ −21 V
IN
―
―
BI
BO
NO
Quiescent current change
T = 25°C
j
ΔI
1.0 mA ≤ I
≤ 40 mA
―
―
OUT
Output noise voltage
Long term stability
V
Ta = 25°C, 10 Hz ≤ f ≤ 100 kHz
―
150
45
μV
rms
ΔV
/Δt
OUT
―
―
―
mV/kh
dB
−33 V ≤ V ≤ −23 V,
IN
T = 25°C, f = 120 Hz
j
Ripple rejection ratio
Dropout voltage
R.R.
3
1
1
33
―
―
48
1.7
1.5
―
―
―
V
T = 25°C
j
V
D
Average temperature
coefficient of output voltage
T
CVO
I
= 5 mA
OUT
mV/°C
10
2009-09-30
TA79L05,06,08,09,10,12,15,18,20,24F
TA79L20F
Electrical Characteristics
(Unless otherwise specified, VIN = −29 V, IOUT = 40 mA, CIN = 0.33 μF, COUT = 0.1 μF,
0°C ≤ Tj ≤ 125°C)
Test
Circuit
Characteristics
Output voltage
Symbol
Test Condition
Min
Typ.
Max
Unit
V
V
1
T = 25°C
j
−20.8 −20.0 −19.2
OUT
−35 V ≤ V ≤ −23.5 V
IN
―
―
―
―
33
28
33
17
330
285
370
170
Line regulation
Load regulation
Reg·line
Reg·load
1
1
T = 25°C
mV
mV
j
−35 V ≤ V ≤ −24 V
IN
1.0 mA ≤ I
1.0 mA ≤ I
≤ 100 mA
≤ 40 mA
OUT
OUT
T = 25°C
j
−35 V ≤ V ≤ −23.5 V,
IN
−21.0
―
−19.0
1.0 mA ≤ I
≤ 40 mA
OUT
Output voltage
V
1
1
T = 25°C
V
OUT
j
1.0 mA ≤ I
≤ 70 mA
−21.0
―
―
3.3
―
−19.0
6.5
6.0
1.5
0.1
―
OUT
T = 25°C
j
Quiescent current
I
mA
mA
B
T = 125°C
j
―
ΔI
1
1
2
1
−35 V ≤ V ≤ −24 V
IN
―
―
BI
BO
NO
Quiescent current change
T = 25°C
j
ΔI
1.0 mA ≤ I
≤ 40 mA
―
―
OUT
Output noise voltage
Long term stability
V
Ta = 25°C, 10 Hz ≤ f ≤ 100 kHz
―
170
49
μV
rms
ΔV
/Δt
OUT
―
―
―
mV/kh
dB
−35 V ≤ V ≤ −27 V,
IN
T = 25°C, f = 120 Hz
j
Ripple rejection ratio
Dropout voltage
R.R.
3
1
1
31
―
―
37
1.7
1.7
―
―
―
V
T = 25°C
j
V
D
Average temperature
coefficient of output voltage
T
CVO
I
= 5 mA
OUT
mV/°C
11
2009-09-30
TA79L05,06,08,09,10,12,15,18,20,24F
TA79L24F
Electrical Characteristics
(Unless otherwise specified, VIN = −33 V, IOUT = 40 mA, CIN = 0.33 μF, COUT = 0.1 μF,
0°C ≤ Tj ≤ 125°C)
Test
Circuit
Characteristics
Output voltage
Symbol
Test Condition
Min
Typ.
Max
Unit
V
V
1
T = 25°C
j
−25.0 −24.0 −23.0
OUT
−38 V ≤ V ≤ −27 V
IN
―
―
―
―
35
30
40
20
350
300
440
200
Line regulation
Load regulation
Reg·line
Reg·load
1
1
T = 25°C
mV
mV
j
−38 V ≤ V ≤ −28 V
IN
1.0 mA ≤ I
1.0 mA ≤ I
≤ 100 mA
≤ 40 mA
OUT
OUT
T = 25°C
j
−38 V ≤ V ≤ −27 V,
IN
−25.2
―
−22.8
1.0 mA ≤ I
≤ 40 mA
OUT
Output voltage
V
1
1
T = 25°C
V
OUT
j
1.0 mA ≤ I
≤ 70 mA
−25.2
―
―
3.5
―
−22.8
6.5
6.0
1.5
0.1
―
OUT
T = 25°C
j
Quiescent current
I
mA
mA
B
T = 125°C
j
―
ΔI
1
1
2
1
−38 V ≤ V ≤ −28 V
IN
―
―
BI
BO
NO
Quiescent current change
T = 25°C
j
ΔI
1.0 mA ≤ I
≤ 40 mA
―
―
OUT
Output noise voltage
Long term stability
V
Ta = 25°C, 10 Hz ≤ f ≤ 100 kHz
―
200
56
μV
rms
ΔV
/Δt
OUT
―
―
―
mV/kh
dB
−35 V ≤ V ≤ −29 V,
IN
T = 25°C, f = 120 Hz
j
Ripple rejection ratio
Dropout voltage
R.R.
3
1
1
31
―
―
47
1.7
2.0
―
―
―
V
T = 25°C
j
V
D
Average temperature
coefficient of output voltage
T
CVO
I
= 5 mA
OUT
mV/°C
12
2009-09-30
TA79L05,06,08,09,10,12,15,18,20,24F
Test Circuit 1
VOUT, Reg·line, Reg·load, IB, ΔIB, ΔVOUT/Δt, VD, TCVO
Test Circuit 2
VNO
Test Circuit 3
R.R.
13
2009-09-30
TA79L05,06,08,09,10,12,15,18,20,24F
Usage Precautions
• Low voltage
Do not apply voltage to the Product that is lower than the minimum operating voltage, or the Product’s
protective functions will not operate properly and the Product may be permanently damaged.
• Overcurrent Protection
The overcurrent protection circuits in the Product are designed to temporarily protect Product from minor
overcurrent of brief duration. When the overcurrent protective function in the Product activates,
immediately cease application of overcurrent to Product. Improper usage of Product, such as application of
current to Product exceeding the absolute maximum ratings, could cause the overcurrent protection circuit
not to operate properly and/or damage Product permanently even before the protection circuit starts to
operate.
• Overheating Protection
The thermal shutdown circuits in the Product are designed to temporarily protect Product from minor
overheating of brief duration. When the overheating protective function in the Product activates,
immediately correct the overheating situation. Improper usage of Product, such as the application of heat
to Product exceeding the absolute maximum ratings, could cause the overheating protection circuit not to
operate properly and/or damage Product permanently even before the protection circuit starts to operate.
14
2009-09-30
TA79L05,06,08,09,10,12,15,18,20,24F
15
2009-09-30
TA79L05,06,08,09,10,12,15,18,20,24F
Package Dimensions
16
2009-09-30
TA79L05,06,08,09,10,12,15,18,20,24F
RESTRICTIONS ON PRODUCT USE
•
•
•
Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively “Product”) without notice.
This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.
Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the
Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of
all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes
for Product and the precautions and conditions set forth in the “TOSHIBA Semiconductor Reliability Handbook” and (b) the
instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their
own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such
design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts,
diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating
parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR
APPLICATIONS.
•
Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring
equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.
Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or
reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious
public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used
in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling
equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric
power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this
document.
•
•
Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
•
•
The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
•
•
Do not use or otherwise make available Product or related software or technology for any military purposes, including without
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile
technology products (mass destruction weapons). Product and related software and technology may be controlled under the
Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product
or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of
noncompliance with applicable laws and regulations.
17
2009-09-30
相关型号:
©2020 ICPDF网 联系我们和版权申明