首页 |元器件品牌

TC4001BP_07 [TOSHIBA]

Quad 2 Input NOR Gate; 四2输入或非门
TC4001BP_07
型号： TC4001BP_07
厂家： TOSHIBA    TOSHIBA
描述：

Quad 2 Input NOR Gate
四2输入或非门

栅
文件： 总9页 (文件大小：251K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
TC4001BP/BF/BFN/BFT  
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic  
TC4001BP,TC4001BF,TC4001BFN,TC4001BFT  
TC4001B Quad 2 Input NOR Gate  
Note: xxxFN (JEDEC SOP) is not available in  
Japan.  
The TC4001B is 2-input positive NOR gate, respectively.  
Since the outputs of these gates are equipped with the buffers,  
TC4001BP  
the input/output transmission characteristics have been  
improved and the variation of transmission time due to an  
increase in the load capacity is kept minimum.  
Pin Assignment  
A1  
B1  
1
2
3
4
5
6
7
14  
V
DD  
TC4001BF  
TC4001BFN  
TC4001BFT  
13 A4  
12 B4  
11 X4  
10 X3  
X1  
X2  
B2  
A2  
9
8
B3  
A3  
V
SS  
(top view)  
Logic Diagram  
1/4 TC4001B  
X = A + B  
A
B
X
Weight  
DIP14-P-300-2.54  
SOP14-P-300-1.27A  
SOL14-P-150-1.27  
TSSOP14-P-0044-0.65A  
: 0.96 g (typ.)  
: 0.18 g (typ.)  
: 0.12 g (typ.)  
: 0.06 g (typ.)  
1
2007-10-01  
TC4001BP/BF/BFN/BFT  
Absolute Maximum Ratings (Note)  
Characteristics  
DC supply voltage  
Symbol  
Rating  
Unit  
V
V
− 0.5 to V + 20  
SS SS  
V
V
DD  
Input voltage  
V
V
V
− 0.5 to V  
− 0.5 to V  
±10  
+ 0.5  
+ 0.5  
IN  
SS  
SS  
DD  
DD  
Output voltage  
V
V
OUT  
DC input current  
I
mA  
mW  
°C  
°C  
IN  
Power dissipation  
P
300 (DIP)/180 (SOIC)  
−40 to 85  
D
Operating temperature range  
Storage temperature range  
T
opr  
T
−65 to 150  
stg  
Note:  
Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance or  
even destruction.  
Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the  
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly  
even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute  
maximum ratings and the operating ranges.  
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook  
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test  
report and estimated failure rate, etc).  
Operating Ranges (V = 0 V) (Note)  
SS  
Characteristics  
Symbol  
Test Condition  
Min  
Typ.  
Max  
18  
Unit  
DC supply voltage  
Input voltage  
V
―
―
3
0
―
―
V
V
DD  
V
V
DD  
IN  
Note:  
The operating ranges must be maintained to ensure the normal operation of the device.  
Unused inputs must be tied to either VDD or VSS  
.
2
2007-10-01  
TC4001BP/BF/BFN/BFT  
Static Electrical Characteristics (V = 0 V)  
SS  
−40°C  
25°C  
Typ.  
85°C  
Test Condition  
Characteristics  
Symbol  
Unit  
V
V
(V)  
DD  
Min  
Max  
Min  
Max  
Min  
Max  
5
4.95  
9.95  
―
―
4.95  
9.95  
5.00  
―
―
4.95  
9.95  
14.95  
―
―
―
|I  
| < 1 μA  
OUT  
High-level  
output voltage  
V
10  
10.00  
OH  
V
= V , V  
SS DD  
IN  
15 14.95  
―
14.95 15.00  
―
―
5
10  
15  
5
―
―
0.05  
0.05  
0.05  
―
―
0.00  
0.00  
0.00  
−1.0  
−4.0  
−2.2  
−9.0  
0.05  
0.05  
0.05  
―
0.05  
0.05  
0.05  
―
|I  
| < 1 μA  
OUT  
Low-level  
output voltage  
V
―
―
V
OL  
V
= V , V  
SS DD  
IN  
―
―
―
V
V
V
V
V
V
V
V
V
V
V
V
= 4.6 V  
= 2.5 V  
= 9.5 V  
= 13.5 V  
−0.61  
−2.50  
−0.51  
−2.10  
−1.30  
−3.40  
−0.42  
−1.70  
−1.10  
−2.80  
OH  
OH  
OH  
OH  
5
―
―
―
Output high  
current  
I
10 −1.50  
15 −4.00  
―
―
―
mA  
OH  
―
―
―
= V  
IN  
SS  
= 0.4 V  
= 0.5 V  
= 1.5 V  
5
0.61  
1.50  
4.00  
―
―
―
0.51  
1.30  
3.40  
1.2  
3.2  
―
―
―
0.42  
1.10  
2.80  
―
―
―
OL  
10  
15  
OL  
Output low  
current  
I
mA  
OL  
12.0  
OL  
= V , V  
SS DD  
IN  
= 0.5 V  
= 1.0 V  
= 1.5 V  
5
3.5  
7.0  
―
―
―
3.5  
7.0  
2.75  
5.50  
8.25  
―
―
―
3.5  
7.0  
―
―
―
OUT  
OUT  
OUT  
10  
15  
Input high  
voltage  
V
V
IH  
11.0  
11.0  
11.0  
|I  
OUT  
| < 1 μA  
V
V
V
= 4.5 V  
= 9.0 V  
= 13.5 V  
5
―
―
―
1.5  
3.0  
4.0  
―
―
―
2.25  
4.50  
6.75  
1.5  
3.0  
4.0  
―
―
―
1.5  
3.0  
4.0  
OUT  
OUT  
OUT  
10  
15  
Input low  
voltage  
V
I
V
IL  
|I  
| < 1 μA  
OUT  
“H”  
level  
V
V
= 18 V  
18  
18  
―
―
0.1  
―
―
10−5  
0.1  
―
―
1.0  
IH  
IH  
IL  
Input  
current  
“L”  
μA  
μA  
I
= 0 V  
−0.1  
−10−5  
−0.1  
−1.0  
IL  
level  
5
―
―
―
0.25  
0.50  
1.00  
―
―
―
0.001  
0.001  
0.002  
0.25  
0.50  
1.00  
―
―
―
7.5  
V
= V , V  
SS DD  
IN  
Quiescent  
supply current  
I
10  
15  
15.0  
30.0  
DD  
(Note)  
Note: All valid input combinations.  
3
2007-10-01  
TC4001BP/BF/BFN/BFT  
Dynamic Electrical Characteristics (Ta = 25°C, V = 0 V, C = 50 pF)  
SS  
L
Test Condition  
Characteristics  
Symbol  
Min  
Typ.  
Max  
Unit  
ns  
V
(V)  
DD  
5
―
―
―
―
―
―
―
―
―
―
―
―
―
70  
35  
30  
70  
35  
30  
65  
30  
25  
65  
30  
25  
5
200  
100  
80  
Output transition time  
t
t
―
―
―
10  
15  
5
TLH  
THL  
200  
100  
80  
Output transition time  
Propagation delay time  
10  
15  
5
ns  
ns  
200  
100  
80  
t
t
10  
15  
5
pLH  
pHL  
200  
100  
80  
Propagation delay time  
Input capacitance  
―
10  
15  
ns  
C
―
7.5  
pF  
IN  
Circuit and Waveform for Measurement of Dynamic Characteristics  
Circuit  
Waveform  
20 ns  
20 ns  
V
DD  
90%  
50%  
10%  
Input  
90%  
50%  
10%  
Input  
Output  
P.G.  
t
t
THL  
TLH  
90%  
50%  
10%  
C = 50 pF  
L
90%  
50%  
10%  
Output  
V
SS  
t
t
pLH  
pHL  
4
2007-10-01  
TC4001BP/BF/BFN/BFT  
Package Dimensions  
Weight: 0.96 g (typ.)  
5
2007-10-01  
TC4001BP/BF/BFN/BFT  
Package Dimensions  
Weight: 0.18 g (typ.)  
6
2007-10-01  
TC4001BP/BF/BFN/BFT  
Package Dimensions (Note)  
Note:  
This package is not available in Japan.  
Weight: 0.12 g (typ.)  
7
2007-10-01  
TC4001BP/BF/BFN/BFT  
Package Dimensions  
Weight: 0.06 g (typ.)  
8
2007-10-01  
TC4001BP/BF/BFN/BFT  
RESTRICTIONS ON PRODUCT USE  
20070701-EN GENERAL  
• The information contained herein is subject to change without notice.  
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor  
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical  
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of  
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of  
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.  
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as  
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and  
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability  
Handbook” etc.  
• The TOSHIBA products listed in this document are intended for usage in general electronics applications  
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,  
etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires  
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or  
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or  
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,  
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his  
document shall be made at the customer’s own risk.  
• The products described in this document shall not be used or embedded to any downstream products of which  
manufacture, use and/or sale are prohibited under any applicable laws and regulations.  
• The information contained herein is presented only as a guide for the applications of our products. No  
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which  
may result from its use. No license is granted by implication or otherwise under any patents or other rights of  
TOSHIBA or the third parties.  
• Please contact your sales representative for product-by-product details in this document regarding RoHS  
compatibility. Please use these products in this document in compliance with all applicable laws and regulations  
that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses  
occurring as a result of noncompliance with applicable laws and regulations.  
9
2007-10-01  

相关型号：

TC4001BP_12

 TC4001B Quad 2 Input NOR Gate
TOSHIBA

TC4001UBP

 暂无描述
TOSHIBA

TC4002BF(TP1)

 IC 4000/14000/40000 SERIES, DUAL 4-INPUT NOR GATE, PDSO14, 0.300 INCH, PLASTIC, SOIC-14, Gate
TOSHIBA

TC4006BP

 IC 4000/14000/40000 SERIES, 5-BIT RIGHT SERIAL IN SERIAL OUT SHIFT REGISTER, TRUE OUTPUT, PDIP14, 0.300 INCH, PLASTIC, DIP-14, Shift Register
TOSHIBA

TC4007

 CMOS DIGITAL INTEGRATED CIRCUIT SILICON MONOLITHIC
TOSHIBA

TC4007UBF

 CMOS DIGITAL INTEGRATED CIRCUIT SILICON MONOLITHIC
TOSHIBA

TC4007UBP

 CMOS DIGITAL INTEGRATED CIRCUIT SILICON MONOLITHIC
TOSHIBA

TC4008BP

 IC 4000/14000/40000 SERIES, 4-BIT ADDER/SUBTRACTOR, PDIP16, 0.300 INCH, PLASTIC, DIP-16, Arithmetic Circuit
TOSHIBA

TC4009UBP

 IC 4000/14000/40000 SERIES, HEX 1-INPUT INVERT GATE, PDIP16, 0.300 INCH, PLASTIC, DIP-16, Gate
TOSHIBA

TC40102BP

 CMOS DIGITAL INTEGRATED CIRCUIT SILICON MONOLITHIC
ETC

TC40103BP

 CMOS DIGITAL INTEGRATED CIRCUIT SILICON MONOLITHIC
ETC

TC40104BP

 IC 4000/14000/40000 SERIES, 4-BIT BIDIRECTIONAL PARALLEL IN PARALLEL OUT SHIFT REGISTER, TRUE OUTPUT, PDIP16, 0.300 INCH, PLASTIC, DIP-16, Shift Register
TOSHIBA
©2020 ICPDF网 联系我们和版权申明